Update Query Doesn't Select 1 Record
Nov 22, 2006
Upon closing my frmInventory the amount stock of stock is checked against a minimal stock value. If the stock amount is below a set minimal value a subsequent form is opened telling you that stock is low and an email message is generated to notify a manager. I have a checkbox on that form which is set to "True" upon close using an update query. The checkbox is there to give users the option to either send or not send a reminder message that stock is low when a message has already been sent earlier.
The problem is that using that update query ALL records are set to "sent=true" and not just the 1 record I intend.
This is my code in the "on close" event:
DoCmd.OpenQuery "qryUpdateEmailMinimal_True
and here's the SQL:
UPDATE tblInventory SET tblInventory.emailSentMinimal = True;
I assume what is missing is a reference to an inventoryID number. How do I do that?
View Replies
ADVERTISEMENT
Jul 30, 2006
Hi,
I have Access 2002 on Windows XP.
The last version of Access I've used was 97 but I'm getting back into it. I've read a couple of things that recommend creating a form based on a query, not a table, especially if a calculated field is involved.
When I create a select query based on 1 table, I can change/add/delete records right in the results of the select query, which will carry over to the form just fine.
However, when I use an additional table and join them in my select query, I can no longer update any of the fields that show in the query result. The link I'm using is just a 1 to 1.
How can I get around this? I'm using the second table just for lookup purposes (use the value of one of the fields in a calculation), but I want to be able to update the fields from table 1 from the form.
Thanks.
View 3 Replies
View Related
Aug 4, 2014
I have a database used to track my personal assignments, created about six years ago using Access 2003 on Windows XP. Recently upgraded to Access 2010 on Windows 7. At some point thereafter, I started having the following issue:
When a new record is created, that record gets added to the table, but doesn't show-up in any query, form, or report until after another new record has been added. The most recently added record cannot be located to view or update, except in the table, until after another new record has been added to the table. Queries, forms, & reports now always lag behind by one record.
None of the queries, forms, or reports tested contain filters. I have several multi-user databases that I also support and none of those users have reported having this problem. This is only happening on my personal database.
I've re-created this database once or twice in the past to resolve other issues, but would like to avoid that route this time around, if possible.
View 7 Replies
View Related
Aug 22, 2006
I can see which records are missing from the table I want to import to but this query picks up no records:
SELECT [Field1] FROM Table_Linked WHERE [Field1] NOT IN (SELECT [Field1] FROM TableA);
Yet, when I run them separately, all fields are displayed.
Am I doing something wrong with the NOT IN part of the sttement that access doesn't like? If you run this in SQL server it works fine.
View 1 Replies
View Related
Jun 19, 2007
hello
i have two tables in a one to many relationship, TBL_submissions is a table containing global information about claims submitted by contractors for work done (invoice number, total claim value, contractor etc..), each submission being a batch of claims for specific jobs (measures)
TBL_Submissions is in a one to many relationship with TBL_Measures because one submmsion contains information about many measures. Each record in the Measures table contains only one field IDSubmission relating to this global information, that is IDSubmission which is an autonumber primary key of the submissions table, i.e it is foreign key in TBL_Measures
Each submission comes in to us as an excel file and there is a form where users fill in the global information into text boxes and combo boxes then click an import button browse to the excel file and it gets pulled into a temporary table TBL_TMPSubmission
a query adds an IDSubmission field to this temporary table and then what i want to do is fill it with the autonumber of the record i have just added to TBL_Submissions by pulling all the global information from the form - i can then use a simple append query to load all the new data into TBL_Measures
The buit to add the IDSubmission filed to the temp table works fine and the append query is easy enough i had that going without the ID filed before i added relationships to my database i am trying to fill in the last entered ID with the following statement
UPDATE [TBL_TmpSubmission] SET IDSubmission = (SELECT MAX(IDSubmission) FROM TBL_Submissions)
but i get the error "operation must use an updatable query"
is this a simple syntax error or am i going about this the wrong way?
View 2 Replies
View Related
Dec 28, 2007
Hello,
I'm having a small problem converting a select query I wrote into an update query. Below is my original select statement:
SELECT Mid([address3],1,InStrRev([address3]," ")-4) AS CITYx, Mid([address3],InStrRev([address3]," ")-2,2) AS STATEx, Mid([address3],InStrRev([address3]," ")+1,10) AS ZIPx, [address3] AS Expr1
FROM Exercise2
Where right([address3],1) <> "E" and address3 is not null;
The above statement basically parses the address field. Now what I need is an update statement that will use the above code. I'm needing to update the empty fields for city, state, and zip from the field address3 which contains all 3 combined.
Thanks,:mad:
View 1 Replies
View Related
Apr 4, 2013
I have a Sales Table with below fields, i might have not set it up in the best way possible.
Consumer, Consumer_ID, SaleDate,Prod_Sl#,Prod_Type,Sale Amount
1. I need to update the sales price for each item sold based on category of Product Type, as we are tracking the product with Serial Number.
For an instance if 2 items of Category1 with Prod_Sl# as Sl1 and Sl2 and
2 items of Category 2 with Prod_Sl# as Sl3 and Sl4 are sold.
I need to update the sales price amount for these.
2. I want to accomplish this using a query.
View 1 Replies
View Related
May 31, 2006
Hi, I have a db that has worked perfect with multiple users.
Now, the db doesnt show the updates made by different users.
How can this happen?
Jack
View 1 Replies
View Related
Sep 23, 2014
Let's say Table (T1) has fields F1 and F2. After a massive update to T1, there are some records with F1 = "" because a Dlookup using F2 as criteria to another Table (T2) resulted in a null. I created a select query to show unique T1F2 values where T1F1 = "". The user can use this query to find out which F2 values need to be added to T2.
How do I create an update query that will update T1F1 with values from T2 using the T1F2 results from the select query to again use the Dlookup to T2 (of course after T2 has been updated to contain the missing F2's)?
View 1 Replies
View Related
Feb 27, 2008
I have a Combobox so the enduser can search and select items for the form below it rather than clicking the arrows for Next/Previous.However I have an issue with DLookup queries.My Combobox is called 'F_ComboBox' (I use F_ in my forms to indicate it's a form textfield and not from a table).My first field in the form, called 'F_ProdID', I want it to select the rows ID from the Combobox option selected. So it's simply:=[F_ComboBox]Which works fine, it shows the ID for what I selected... but when I do this to show my ProductName...=DLookup([ProductName], 'Products', [ProdID] = [F_ComboBox])Or the same but using the first textfield:=DLookup([ProductName], 'Products', [ProdID] = [F_ProdID])It loads once but if I select another item out of the Combobox it doesn't change, it just stays on the last result. So the query works, just doesn't refresh when a new item is picked from the ComboBox.Am I doing something wrong?Thanks,Nick.
View 1 Replies
View Related
Jan 17, 2014
I have a combo box on a form with claim #s. When selecting a claim # the appropriate record displays, but when using the record selector to advance to the next record, the combo selection does not update.
View 11 Replies
View Related
Aug 27, 2013
Right now, I'm working with an SQL code of
Code:
"UPDATE Individuals SET [ShareholderOf] = " & Me.CompanyNo & " WHERE [Name] = '" & PerName & "';"
However, doing so will obviously change the "Shareholder of" field into what the user inputs (Me.CompanyNo). What should I use if I want it to ADD the user input rather than REPLACING the old [shareholderof] value?
View 6 Replies
View Related
Dec 19, 2011
I have this small problem with datasheet:
I have 2 tables. They are connected with ID (Form1.ID=Form2.fID)
Now I made a datasheet of both of them, but the ID doesn't update automatically, how do I fix this?
View 1 Replies
View Related
Jun 10, 2005
Hi All,
I hope I can explain what I am trying to achieve..
I have a "Top 1" query (Qry_Avail_StockItem), which selects the next available record in a table.
I have a main form (Frm_MasterStock) with a command button "Add Record".
If the user clicks the "Add Record" button, I need the form to go to the record that the query has selected.
Thanks in Advance..
View 11 Replies
View Related
Jan 26, 2015
i want to be able to create an On Click Event when pushing a command button that will run an Update query to update a record and after it has been updated that specific record will pop up on a Form and be displayed. i know a different way is to run the Update query and then have it displayed in a Select query but i want it to be displayed on a Form instead. is it possible?
View 4 Replies
View Related
Apr 11, 2005
Please refer to the attached file. The form of concern is frmAssessmentInput.
Select the appropriate criteria per instructions (in red), including entries on the continuous subform. Then click the "Input data" command button. A 2nd form opens (frmObservations) that contains a textbox labeled DocumentStreamID, and this textbox SHOULD contain the value from the corresponding DocumentStreamID textbox contained in the master form, where you clicked the command button. However, even though the sources are linked properly, the value doesn't pass if you click the command button immediately after adding a new record to the continuous form; it only passes if 1) the master form is closed and reopened first, or 2) if you close the 2nd form, toggle to design view and back to form view for the master form, and then click the "Input data" button again.
What is going on here? Given that the value passes once another procedure is run, do you think this a requery problem? I tried placing a VBA control requery in the 2nd form's On Current and On Load events, but this didn't solve things for me so I took out those event procedures (code could have been wrong though).
View 3 Replies
View Related
Nov 15, 2007
Let's say I have a query on a form that returns results. Is it possible to double-click a record in the recordset and open a form.
I am currently doing this just fine from a listbox, but am wondering if it is possible from a query.
View 1 Replies
View Related
Mar 15, 2006
Hi,
I don't quite know if I am heading down a blind alley here. I want to filter a form to show a subset of the records via a toggle button. Click again and you go back to the full record set.
The form is based on a query and the filter is to be based on a copy of the query with several criteria and sorts added. This will result in a record set of active projects comprising about 20% of all records (65 out of 253). The sorting sets the record order to match the main management report and so the Planner can update the active records by navigating through the record set rather than having to search for each record using the Find button.
If what I am trying to do is not the way to achieve the desired result, I'd be grateful for any pointers elsewhere.
Regards,
Keith.
View 12 Replies
View Related
Feb 27, 2015
I'm running into an issue with my forms. I have a form that contains a subform, that contains a list of projects. This list is read-only. To update a record, you can double click on it, which opens another form filtered on this record, and which contains the fields in the first form as well as some others.
I have a command button on that last form to "Save and close", which fires up a macro that saves the record and closes the window.
Now, the issue that I'm having is that, when the window closes and I'm once again in front of the first form with the list of projects, the values of the record I changed are not updated and when I click on another record, Access tells me there's a conflict in the values and asks me if I want to keep the changes, discard them or copy to the clipboard.
It seems to consider the old values from the first form as a change, and thus asks me which to keep between these, and the actual (proper) changes I made in the dedicated form.
For the proper changes to be applied, I need to select "Drop changes".
I tried to requery the first form, also undo the changes to it after closing the window, but none of that worked.
I'm actually basing this on one of the templates, which does exactly what I want and which obviously works...
View 3 Replies
View Related
Feb 22, 2005
Hello all, I have a couple questions. First I am trying to create a select query that will show the results that I have two fields , one is "Date" & the other is "Current" For the date I am using the a between statement "Between [start] and [end]. Under the "Current" I have "Applied" & below that I have "Overage" The problem is when I enter my date range, it shows all records with the Overage or Applied, but if I go & remove either "Overage" or Applied, then it works fine.
Is there somthing that I am missing
Second question is when using a find command box, is there a way to have it search multiple tables, if so how would I set the find box to search both tables, if the table names were called Let say Table 1 & table 2
Thanks!!!
View 1 Replies
View Related
Aug 7, 2013
Was trying to append an Excel 97-2003 spreadsheet to an existing Access 2010 database.
The last field in the spreadsheet is Date Update.
When I click 'Finish' I get the error "Field Date Update doesn't exist in destination table <name of table>.
This database was created in Access 2003, and was not updated since and I don't have Access 2003 on my destop.
I saved the Excel Spread as a Excel Workbook *.xlsx and tried to append it. Same Error was the result.
View 14 Replies
View Related
Mar 25, 2008
I have searched and search and I can't find the answer to this question when I thought it would be simple. Hopefully you can put me out of my misery!
I have a access 2007 split form with a series of search boxes and a query result window. Enter info into one or more of the search boxes, click search and you get the matching results in the query window below. That works fine but I want to work with the results of the query, how can I do this?
I was looking for the user to be able to select a record and then click a command button to open that record in a form. Or in another instance select a record in the result window, have the current from close and have the primary key passed to a another form which I use to open the split form.
I just can't see how to do it but I expect there are several ways. Happy to use VBA but my experience is with Excel VBA so I'm still getting used to the objects.
Thanks in advance!
View 4 Replies
View Related
Jun 13, 2006
Hi,
I have a query that I would like to run from a form. I have created the button and the query, but want to add in a clause that will use the user selected record / field as the criteria for the query when its run.
Got any examples of code I could have a play with
I am struggling here so need any help I can get!!
Cheers
Paul
View 1 Replies
View Related
May 12, 2014
I have a list box bound to a query. If the list box retrieves two records, I am not able to select only one of them. If I click, it gets both records selected ( highlighted ). Is there any way I can select only one record?
View 8 Replies
View Related
Nov 30, 2013
Based upon a specific date (varDate), I want to select the record that is active (who drives the lease car).
row 1 user X from 13/11/2013
row 2 user Y from 15/11/2013
row 3 user Z from 17/11/2013
I want to find the active user on a date. So on date 13/11/2013 (=varDate), user X is active, on 14/11/2013 (=varDate), user X is still active, on 15/11/2013 (=varDate), user Y is active, on 16/11/2013 (=varDate), user Y is still active and on 17/11/2013 and later, user Z is active.
View 1 Replies
View Related
Aug 25, 2015
I have 2 tables:
Query_Rates (Actually this is the result of a query):
Unit
R_Date
Sold_Rate
A
24-AUG-15
145
[code]...
So what I want is a list of all the records from the Query_Rates table where the absolute differences between the sold rates between Query_Rates & [Sent till date] (matching the unit # and the dates) is greater than 1 and the record shouldn't be displayed if it is already present in the [Sent till date] table. But if you notice the first record which has unit A is already mentioned in the "Sent till date" table and shouldn't be repeated again in the query result.
The desired out put should be:
Unit
R_Date
Sold_Rate
X
25-AUG-15
200
View 3 Replies
View Related
