Update Values On Table 1 Depending On Dates
Sep 19, 2014
What i need:I have the attached database which includes 2 tables (Table1 and Table2) which are related One-2-Many (Table1 is the One and Table2 the Many)There is one form also with the name "Form1" which includes 11 unbound (ctr1,2,3...11) and are calculated with the values of fields [MainDate] , [Days] and [EndDays]
The Issue: As you can see in the attached sample, on Table1 i can assign the "MainDate" value , the "Days" and on field "EndDays" i can have the value of the [MainDate]+[Days].
I need to update the field "RefNo" on Table1 on depending the date range of the field [EndDays] and the controls [ctr1-11]. Specifically i need : If the Date() is in the range of eg. [EndDate] and [ctr1] i need to have the value of the first record of the Table2 (RefNo) on field "RefNo" into Table1. If the Date() is the range of [EndDate] and [ctr2] i need the second record values of the field [RefNo] into Table2 and so over..
View Replies
ADVERTISEMENT
May 12, 2014
Any way to have a form with Dates as column headers to update a table where the dates are stored in rows???
The table set up is like this:
tblOpHdr
DiaryID (PK) - OpDate (Date)
tblOpDetail
DiaryID (FK) - CostCode - MachineNumber - MachineHours - etc
I'm just wondering if there's any way I can do this with a datasheet or a crosstab type setup?
It's Access 2010.
View 1 Replies
View Related
Nov 22, 2013
I have several result fields which are all drop down lists. I want each result field's drop down list values to be different depending on the selected value of the Test1 drop down list.I came up with using the .rowsource keyword. My syntax seems to be fine but I'm not getting any values under the result fields when I run the form.Here is my code so far:
Private Sub Test1_AfterUpdate()
If Me.Test1 = "Stress Echo" Or Me.Test1 = "Stress SPECT" Or Me.Test1 = "Stress PET" Or Me.Test1 = "Stress MRI" Then
Me.Test1Result2.RowSourceType = "Value List"
Me.Test1Result3.RowSourceType = "Value List"
[code]...
View 14 Replies
View Related
Sep 18, 2013
I have a query with an INNER JOIN and ORDER BY that is working great. Now, using the same JOIN, I need to update values in one table with the values in another. I thought it would be simple until I learned you can't do an ORDER BY with an UPDATE. Is there another way to achieve the same result? If you remove the 'ORDER BY', the statement below doesn't produce an error but the results are not correct:
UPDATE TableA INNER JOIN TableB ON (Left(TableA.CDN,6))=(TableB.CDN)
SET TableA.HCC = TableB.HCC
WHERE TableB.HCC Like '241*' AND TableB.BBB = 'X' AND TableA.CCC = "1234" AND TableA.HCC IS NOT NULL
ORDER BY TableB.HCC, TableA.CDN;
View 2 Replies
View Related
Mar 21, 2014
Trying to send out some reminder E mails using some dates that I've set up in text boxes but can't get it to work.
I've started out simple to get it working as I'm not familar with VBA
Code:
If Me![Planned Finish] <= [2days] And Me![Final Reminder] Is Null Then
MsgBox "YES", vbOKOnly
View 4 Replies
View Related
Feb 1, 2008
Not really sure how to word this as I'm not sure if I even understand.
Basically I have been asked to set up a database logging distubances and need to display on the form 3 different dates (action by, monitoring period and date to close case) from the date the data is entered, depending on the disturbance chosen.
So if there was noise nuisance the action date would be 7 days, the monitoring period would be 14 days and the closing date would be 90 days. This would be different from, say dog fouling. When the user chooses the disturbance from the combo box I need the dates to reflect the deadlines for that disturbance.
I have entered the number of days to add onto the table containing the disturbances (ie 7, 14 etc) and know how to add these days onto the original date.
How do I make this happen depending on the disturbance selecting.:confused:
Hopefully someone can help!
View 4 Replies
View Related
Jun 21, 2006
I have a form bound to a table that has a bunch of dates in it. What I want to do, is to be able to have pop-up calendars on the form next to each date field, where the user can select dates from the calendar, then have those dates display on the form, and last but not least, update the date fields in the table.
At the moment, the form I'm working with let's me pick dates from little pop-ups and display the dates, but when I exit the form and then come back into it, the dates are gone! In other words, I'm missing something in the process between the dates displaying onthe form and the dates getting into my table.
If anyone has an idea as to what I might be doing wrong, I wouldappreciate your ideas and suggestions.
Thanks in advance. I don't know where I'd be without this forum!
View 11 Replies
View Related
Dec 30, 2014
I am new to VBA and I'm trying to write a query that will update a table with dates based on user input. For example a user will run data each Monday and that date will be day01. The date table has 28 days total and I need each day row to update with the next date i.e. day01 is 12/30, day02 is 12/31, day03 is 1/01 etc..I am having issues just running the update the query. I get a too few parameters error message on the strsql statement. There are only two columns in the table, order_day(date column) and date_value(text). I want to update order_day. I also need creating a loop so it knows to go back and add days to the other values.
Here is what I have:
Code:
Sub Update_Dates()
Dim rs As Recordset
Dim db As Database
Dim lmsg As String
Dim transactiondate As Date
Dim strsql As String
[Code] ....
View 6 Replies
View Related
Feb 24, 2008
The attached Access XP file demonstrates my problem. I've included a form to make testing easier.
Each record in the Projects table has one or more linked entries in the Keywordlink table, showing keywords that apply to that record. Each record in Projects has a Yes/No 'Utility' field.
A third table, Keywords, supplies the keywords that the user can apply to records in Projects, using the subform on the main form. The Keywords table also includes a True/False 'Utility' field. I have set this to True for for the first three keywords.
I need a query, a series of queries or some VB code that updates Projects_Utility for all records to True if and only if the record's linked entries in Keywordlink include all of the keywords for which Keywords_Utility is True (a boolean 'and', as opposed to an 'or'). Otherwise, Projects_Utility must be set to False.
In the attached file, with the current settings in the Keyword table, the 'GetSelectedProjects' query should then produce single-row listings for ClientA and ClientF.
I'd appreciate any help you can give me on this. I'm not a programmer, but I can manage a bit of VB code if I have to.
View 5 Replies
View Related
Feb 28, 2015
I'm making a very basic sales system for my school project and I'm currently working on the stock management part, as I said it's very basic.
My task -When the user receives a stock delivery they need to update the stock numbers. the value they need to update is the StockNumber value in the Products table. to so this I want to make a form that displays all the product names in a table with a textbox or cell next to it in which the user can enter the amount of that item that has been delivered. And at the bottom of the form there is a button which will add all these new values to the existing values.
1. There is no set number of products, the user is able to add new ones, this is preventing me from just making a separate textbox for each existing product
2. I have attached a jpeg I made in paint to illustrate how I want to the form to work as well as my system as it currently stands, there are a few unused forms and queries.
View 2 Replies
View Related
Dec 5, 2005
Hi
I wonder if anyone can help me out on a db i have inherited. Basically I need to add a field to a table and backfill the field with a number depending on a date field.
The new field (CallID) needs to record the order in which calls are received on a certain date (CallDate in the table). So for example the first call on 1/3/05 CallID=1, the second on 1/3/05 CallID=2. The following day CallID restarts at CallID=1.
So I'm looking for an update query which will set CallID for the several hundred existing records in the database. If anyone can help with a pointer or too, or example SQL, I would be very grateful
Cheers
View 4 Replies
View Related
Mar 30, 2014
right I have auditing system in my database that tracks any changes made to any records. it logs it on a separate table and i show it on a continuous form.
right my problem is that I have loads of check boxes and text boxes on my main form on the form that records the main form I have a field call "new value" this is a text box but if I change a checkbox on the main form it will show -1 or 0 in the new value field on the recording form but I would like it to say yes or no I have tried the following
Code:
Private Sub New_Value_AfterUpdate()
If [New_Value].Value = -1 Then
[New_Value].Value = "yes"
End If
End Sub
this only works if I enter -1 manually but the data is entered automatically after the record is saved on the main form ...
I have also tried on enter before update I get error but now I need it to change on new entry...
View 8 Replies
View Related
Jul 16, 2015
I have an unbound form in which a user enters data relating to a credit dispute, and when they hit the Save button I have a sub that is intended to insert that data into a table. This is a bit out of my comfort zone, so I found some code from another forum and adjusted it to my needs. However, I'm getting errors.
The table name is tbl_complaints. The fields from the form are:
txtAcctNumber
txtClient
txtEoscarType
txtEoscarControl
cboMethodReceipt
....
My code is below.
Private Sub cmdSave_Click()
Dim StrSql As String
On Error GoTo ErrorHandler
StrSql = "INSERT INTO tbl_complaints " _
& "(ACCT_NUMBER, CLIENT_NAME, EOSCAR_TYPE, EOSCAR_CONTROL_NUMBER, METHOD_OF_RECEIPT,
[Code] ....
The error I get is error number 3075, and it says I'm missing an operator in the section that references cboResponseType, but I can't seem to figure out what I'm missing. My head is spinning from staring at these parentheses and apostrophes for so long.
View 14 Replies
View Related
Dec 8, 2014
I have a textbox & button that when entered & pushed - run a query for the top values randomly depending on the value entered into the textbox.
My code is...
strSQL = "SELECT TOP " & Me.Text140.Value & " [CAN - NAME].Name, [CAN - CPT/VOUCHER].Voucher_Number, " & _
"[CAN - CPT/VOUCHER].Procedure_Code, [CAN - CPT/VOUCHER].Service_Date_From, [CAN - CPT/VOUCHER].Patient_ID, [CAN - CPT/VOUCHER].service_id, Rnd([service_id]) AS RandomNum " & _
"FROM [CAN - CPT/VOUCHER], [CAN - NAME] WHERE [CAN - CPT/VOUCHER].Service_Date_From Between " & Me.StartDate.Value & " And " & Me.EndDate.Value & " ORDER BY Rnd([service_id]) DESC "
It runs like it should but doesn't populate any records...that is until I go into the design view, deselect one of the fields and then reselect the same one - only then does it populate.
Do I need to open the query first and then update/append instead?
View 5 Replies
View Related
Sep 23, 2014
I want to add a combo box to a form, where depending on the values entered in the box another combo box would show more values. In other words, if the first combobox had choices of 1, 2, 3 and 4, if 1 was selected the next combo box would have values a, b, c and d. If 2 was selected, it would have values of a, d, e, f and g.
View 2 Replies
View Related
Aug 19, 2005
I realize there are several threads already dedicated to this particular topic but my situation is slightly different... First, my tables are set up like so:
tblStudent(studentID,LName,FName,MI,Gender)
tblRack(rackID,roomID,studentID,rackNumber)
tblRooms(roomID,roomNumber)
There are 3 racks to a room and a total of 90 rooms. A room can hold up to 3 students. A list box holds values that I have typed in (the room numbers). I went with typing them in rather than pulling them from a query because of the way my tables are set up. If I pull from a query as the tables stand, room numbers show up 3 times, once for each rack. I want to be able to fill in text boxes with information on students assigned to the room I choose from my list box (FName, LName, etc...) I'm kind of at a loss here on how to go about getting the info that I want. Using the column property to populate text fields is probably going to be much easier but a query is needed (I think) and using a query causes room numbers to show up 3 times in my list box... Anyone want to throw me a bone?? Thanks! :)
View 2 Replies
View Related
Mar 12, 2013
Below is a sample of the table with the data. I manually added the 1 and 0 to the hc_Year field. However, I would like to create an Update query that will add a 1 to the hc_Year if its the first instance of PIDM & regsYear and add a 0 to the records that are not the first instance.
PIDM | regsYear | hc_Year
52 | 2009 | 1
52 | 2010 | 1
201 | 2007 | 1
201 | 2007 | 0
201 | 2007 | 0
201 | 2008 | 1
View 6 Replies
View Related
Sep 23, 2014
Let's say Table (T1) has fields F1 and F2. After a massive update to T1, there are some records with F1 = "" because a Dlookup using F2 as criteria to another Table (T2) resulted in a null. I created a select query to show unique T1F2 values where T1F1 = "". The user can use this query to find out which F2 values need to be added to T2.
How do I create an update query that will update T1F1 with values from T2 using the T1F2 results from the select query to again use the Dlookup to T2 (of course after T2 has been updated to contain the missing F2's)?
View 1 Replies
View Related
Feb 25, 2014
I am giving two tables and I need to create a macro that automatically updates these tables depending on the value of a Yes/No field. If it's No, it's in the 1st table TableOne, if it's Yes it automatically updates to TableTwo.
So, the best way I saw to go about is to set up an append query and then create a macro that runs it
So my tables have the values FirstName, LastName and isValid (more but keeping it short)
So for my append query, I put TableTwo in the pop up I get. Then, where it asks for the field I put it
Field:FirstName
Table:TableOne
AppendTo:[TableTwo].[FirstName]
Criteria:[TableOne].[isValid] = 1
I do this for all (it was autocompleted except the Criteria field). I tried to keep Criteria with data only for isValid but that didn't work. I wrote it for all the field names, still didn't work. Whenever I click run it says it'll append 0 rows.
View 5 Replies
View Related
Dec 25, 2014
i have two data tables, one is depending on the other. now i need to delete the main table row depending on the subtable row if it is null.
View 3 Replies
View Related
Aug 5, 2013
I have several comboboxes (6) on my form.How to populate these comboboxes with values depending on selected value in previous combobox.
Example.Lets say that you select value "Audi" in combobox 1, then available values in combobox 2 should be "A4","A6","TT" etc. and if you selected "BMW" in combobox 1, then available values in combobox 2 should be "3-series", "5-series" etc...
View 1 Replies
View Related
Nov 23, 2005
Hey all,
I have two fields 1 & 2
field 1 is a simple combo list of user defined values ie A, B, C or D
Field 2 relates to a attribute of the data in field 1 and is not always the same for A, B, C and D. i.e
A could have a,b,c,d or e
B could have c,e,f,g or h
C could have a,g,h,i or j
D could have v,w,x,y or z
I would field 2 to have a combo box which only displays a,b,c,d, or e when A is chosen in field 1; c,e,f,g or h when B is chosen; etc
How do I do this?
Cheers all,
Matt :confused:
View 2 Replies
View Related
Jul 10, 2006
Hi there,
I have a table with a start date and an end date for a leasing database. The lease has an annual fee, but I want to calculate what's that worth for each month of the duration of the lease.
Is this possible through a query? :confused:
I was going to store this data, but having read some of the other posts here, have decided it's not the best option - as I only need these values for reports/queries.
Any help would be greatly appreciated, as I am very rusty on Access at the moment. :(
Thanks,
Mia.
View 3 Replies
View Related
Nov 30, 2007
I have a query that has InspID, InspDate, NextInspDate, Emissions (calculated by multiplying timeelapsed by associated InspDate Result)
I have another query based off this query that sums the Emissions between two selected dates. This works fine as long as the dates I select are actual InspDates which are random. However if I want a clean sum period (Jan 1, 2007-Dec 31,2007) It only sums the emissions that have an Inspdate after Jan 1. Therefore, if I have an inspection on Dec 28, 2006 and Jan 5, 2007, the query will not count any emisisons for Jan 1-5.
When this happens I need the query to lookup the [result] value of the previous InspDate and multiply it by the [timeelapsed] between the [selecteddate] and the [NextInspDate].
What is the best way to retrieve this information?
Thanks
View 6 Replies
View Related
Nov 28, 2006
Right, my first access database is coming along well, with the help of some people on here, but I have another question. The database is designed to track jobs in our small workshop.
We have a 'price matrix', that has our regular customers on the left, the material type long the top ( mild steel, brass, etc), and a cost in each area for each of four types of standard job, so i suppose its a sort of a 'cube' rather than a matrix, except not all customers and materials have an agreed price for each of the standard jobs (there are only four of them, a maximum of 3 per customer)
Now, my database revolves around a 'main' table, with a unique order ID, customer name (from lookup table ), and other details. Initially, I have created another 'cost matrix' table, with a primary key, customer ID (based on the same lookup table), material type and job type (both lookups), and price fields. What I want to do is that my guys can select material and job type, and the cost will be recorded somewhere. Now, I understand that you shouldn't have the same data twice anywhere in the database, so I figured of I am recording the material and job type in question on the main table, and given the customer ID is recorded as well, I should be able to reference this to my cost matrix table and then be able to populate a field on the main form, query against it on reports that sort of thing. However, there is a field on my main table for cost adjustments ( say we work 24 / 7 on a rush job), which is manually entered on a job by job basis, so should I record the total job cost in my main table, or always calculate it when needed using a unit cost + adjustment type of calculation?
Also, how do I populate the field on the main form that the cost should be 'x' from the'cost matrix' table, given the values of the customer, material type and job type fileds?
All help greatfully received. :)
View 1 Replies
View Related
Mar 28, 2007
tblAppointment will take register appointments.
tblTreatment contains Cost for different AppointmentTypes.
The above two tables are linked as 1-M relationship (1 Treatment can have Many Appointments)
Entering data in the tblAppointment - AppointmentType and AppointmentCost are the fields in tblAppointment. AppointmentType a drop down box, so that a specific AppointmentType can be selected.
Problem: Now depending on the AppointmentType selected the AppointmentCost field should automatically display the correct Cost.
Can anyone help please?
Thanks
Paz
View 2 Replies
View Related
