I have a chart that gathers its information from a query.
What the chart shows is the number of businesses for each month over the year (I have a table with a list of businesses that each have a date).
I have added a "next" and "previous" button and a label on the chart : so if the label shows "2014", when you click on "next" it becomes "2015".Now I need to be able to also change the chart so that it actually takes the year displayed in that label and shows the businesses for each month that year.
I have a form with a chart , 2 textboxes for start date and end date and a button to filter the data( filter the data by date range) How do i continue from that? The chart isnt updating.
I have data in a chart over four groups that are just labeled A, B, C and D in the underlying data. The table wants to label the x-axis of the chart SumOfA, SumOfB, SumOfC, and SumOfD. Ideally I would like to drive these labels by text boxes on a form, but I can't even figure out how to change them manually. I got to the data table in the chart designer and changed them there, and they'd show as changed in design view, but then they weren't changed in report view.
I made a form pivot chart. When I open it by going to forms and opening, it opens in the pivot chart view. However, I created a button on a switchboard form for easy access to this pivot chart form and when it opens from the button it is in form view and not pivot chart view. How can I get it to open in pivot chart view from this button so that the users don't have to keep switching it to pivot chart view manually?
I'm trying to create a chart in a form, this is not a problem, however, the chart types available are a bit limited compared to if i inserted a Microsoft Excel Chart object.
I'd do that except I'm trying to create a chart based on a query.
Is there a way to make the chart wizard use the Microsoft Excel Chart object as its chart creator so I have access to the chart types available in that object?
I have searched the forums and tried various options but I get an error message about the syntax.
The button is to run a SQL query to update a field by calculating on the value of a another field on the form. The query is DoCmd.RunSQL "UPDATE BatchPayments SET BatchPayments.[GST Amount] = (BatchPayments.[Net Amount]*0.1) WHERE BatchPayments.BatchPaymentsID=" & Me.BatchPaymentsID&";"
The error message is a compile error where it is expecting a list separator or ).
I'm having a problem trying to update a date field from a button.
I have a form called Add_New_Domain which runs from a table called Domain_Names.
Within the form there is a field called Expiry_Date which tells me when the domain is set to expire. When I first create an entry I manually enter a date in here.
However, every year when the domain renews I would like to increase this date by exactly a year by clicking a button which is also on the form.
I am working on a web database with a form which is bound to an underlying web table where the submissions occur.My challenge is that the fields on the form get submitted to the table even before the submit button is clicked regardless of whether the form was completely filled.
My request is that I want the form to only submit to the submission table only when the submit button is clicked.When I searched on the net, the only solutions I got are VBA written code but my web database cannot use VBA code.
VBA code:
Option Compare Database Option Explicit Private blnGood As Boolean Private Sub cmdSave_Click() blnGood = True Call DoCmd.RunCommand(acCmdSaveRecord) blnGood = False End Sub
I have a single form which becomes either readonly or editable or addnew using a circular toggle switch. The toggle switch is activated by a command button and the caption of the command button is used as the display of the mode.
The SetAddModeBt is a separate command button that initiates the add mode. The problem is that various form or field properties when defined on the fly are not stored and they get lost when you open the form again. Look at the code below:
Code: Sub tglEditBt_Click() '------------------------------------------------------------------------------- ' Circular toggle button to change display mode of the form ' ReadOnly - Edit - Add '------------------------------------------------------------------------------- ' On Error GoTo NotFound Dim ForName As String Dim strSQL As String Dim FMode As String
[Code] ....
Here the first two cases fail when executing the last statement saying it is not supported.
I have a form that has combo boxes and text fields (as well as sub forms). There is also a button linked to some code that says'
Private Sub cmdQuote_Click() 'Creates quote date and prints quote Me.QuoteDate = Now() Me.cbAgentID.Requery DoCmd.OpenReport "Quote", acViewPreview, , "BookingID = " & Me.BookingID End Sub
When the button is pressed the QuoteDate field (it is bound) should be be populated, but unfortunately it is not. I have played with refresh and requery but cannot derive a solution.
I have a stack bar chart that shows hours an event took including delays so its 3 stacked bars. I want to add a goal or target line to the chart but can't seem to keep the bars stack because I have to change the chart type. Any ideas ??
I have a report that is populating from one query. It takes data for a year and groups it by month with the lost time for that month. I am comparing 3 years data 20005, 2006, and 2007. I have set the chart up and it looks good except that my time for each month goes into the data area as a "CountOf" lost time and all months are therefore one. I want to show the lost time for each month. I have tried right clicking on the field in the data area and Autocalc is set to Count, but everything else is grayed out and unavailable. How can I change this setting to just display the value? Thanks in advance for the help.
I know that the wizard wont allow me to put in more than six fields in the chart. Is there any way that I can get around this???
PivotChart: if i have a field named "Jan", when i put it in the pivot chart or table as a sum, it changes the name to Sum_Of_Jan. Is there any way that i can change this?? thank you.
I once saw in this forum a link to a table that had instructions for referencing forms, controls, subforms and all that good stuff depending on which form you are on. I have searched and searched and I can't retrace my steps to find it again. Could someone please point me to it?
I'm currently using MS Access 2000 - When using the chart wizard is there any way of sorting the data by month ? At present I'm getting all my data on one chart but I want to spilt this into seperate months. (ie; 1 chart for July, 1 chart for Aug etc) I know there is the option for choosing 'between dates' but I don't want to have to do a fresh chart every time
Hey,I have a table with a date of birth field and I need to produce a pie chart showing age groups from this.The groups should be:< 16> 15 < 18> 17Help me!
I want to make a chart that shows the number of PLANNED CLOSE DATES and the number of ACTUAL CLOSE DATES for each month of the current financial year. How do I make the Query to base this chart on?
I have a table called Projects Each project has a Target Close Date And some have an Actual Close Date
I want to create a chart that has months on the vertical axis (July to June) and number of projects on the Horizontal axis
Then I want 2 lines on the chart showing how many projects were supposed to be completed and how many actually completed by each month. ie a running total
I think I need to make a query to get the data for this chart, but i dont know how...
I have a table with eight fields. I want to do a chart where I the piles are "tighten" togther two and two. I would like the chart to look something like this (Example):
Report repeats the SAME chart for each value on the x-axis (i.e. x-axis is the date and same chart repeats for each month). The chart on the first page is correct and is the only chart I need. How can I change the settings of the chart so the report is the first page???
I am developing a database that requires the entry of multiple levels of corporate structure and would like to be able to show that structure using an org chart.
I know you can create org charts within Word, Excel or Powerpoint, but does anyone have any suggestions on how this might be accomplished using Access? I have searched the web pretty thoroughly and haven't come up with any answers yet.
I am not necessarily apposed to using an additional software package either, but I need to be able to supply it with variables from within Access and have it produce the desired result.
Any help or suggestions would be greatly appreciated.
I am new to Access and I am trying to use a chart in a report to display the injuries by day of week. Sunday thru Saturday. I am using a qry to pull the information from a tbl that we have entered the information into. I would like to use a Column Chart.
The problem is that it will display the day of week alphabetically and not Sunday -Saturday. I would also like the chart to display each day even thou there were no injuries for that specific day.