How would I go about updating a table from a form? My table consists of employee contact information, ie.. Cell phone, pager number, home phone.
I have created a forum with unbound combo box called employee. As I choose the employee name all other fields are populating just as i want. After I update the form with the correct system contact information i want to be able to save the data and have it update the table. It appears the only data not updating the table is the anything in the combo boxes that are unbounded. Any suggestions?
alright I have a form and I need a couple of text boxes on there to add information to a different table than the other ones. I found this code somewhere on this forum can you tell me if I can use it for what I need, A more detailed explination of my project might be nessecary.
Code: sub AddRecord_Onclick docmd.setwarning false if not isnull(txtName1) then docmd.runsql "INSERT INTO table (areaname) VALUES('" & txtName1 & "');" txtName1.Value = Empty endif end sub
what is the proper syntex for the Insert INTO part, Table is obviously the table I want it inserted into, what is (area), is this the field I want it inserted into?
I want to create a form that will update a table. I have two columns, an item number and a paid column. On the form I want to plug in the item number and then I want to hit ok and it will find that item number and put a value (for example "X") in the paid column. I have tried running an update query when i hit the ok button but I can never get to work
I've creating an Access project, which is at an early stage. I'm using Access 2003 with a default file format set to Access 2000.
I've been trying to update a date field within a table using this piece of code from a Calendar form. The Calendar form has a Command Button called cmd_Accept. Its sub routine is shown below. Both variables, dt (date) and fvr_id (field visit report ID) are global.
The code works - too well! Instead of updating the only the target record, it will either update the first record plus the target record or all records with the same date and I cannot understand why this should happen.
[Field Visit Report ID] is unique, being the primary key for the table, tbl_field_visit. It is AutoNumber generated. I've double-checked the table and all entries in [Field Visit Report ID] are unique. All my MsgBOX displays show what I would expect to see.
As you can see, I've also tried doing the same task using SQL - with exactly the same result.
I've been going round and round with this for days. Should I bin this and go down another route, or can anyone tell me where I'm going wrong?
Any help much appreciated.
Private Sub cmd_Accept_Click()
Dim dbs As Database, rst As Recordset Dim strSQL As String
dt = ocxCalendar.Value ' +++++++++++++++++++++ ' Field Visit Report ID now set from another sub routine. Tested and working. ' fvr_id = Form.[Field Visit Report ID] ' +++++++++++++++++++++ ' MsgBox "The Field visit report ID is " & fvr_id, vbOKOnly ' MsgBox "The date is " & dt, vbOKOnly
Set dbs = CurrentDb Set rst = dbs.OpenRecordset("tbl_field_visit") If rst.RecordCount <> 0 Then rst.MoveFirst
MsgBox "fvr_id = " & fvr_id & " Date = " & dt, vbOKOnly Do While Not rst.EOF If (rst![Field Visit Report ID] = fvr_id) Then MsgBox "The Record ID is " & fvr_id, vbOKOnly found = True With rst .Edit !Date = dt .Update .Bookmark = .LastModified End With End If rst.MoveNext Loop rst.Close
' If found Then ' vbButtons = vbOKOnly + vbExclamation ' MsgBox "Record Found! " & " Date = " & dt & " Field Visit Report ID = " & fvr_id, vbButtons ' If rst.RecordCount <> 0 Then rst.MoveFirst ' strSQL = "SELECT tbl_Field_Visit.Date FROM tbl_Field_Visit WHERE tbl_Field_Visit.[Field Visit Report ID] = " & fvr_id ' Me.RecordSource = strSQL ' MsgBox strSQL, vbOKOnly ' strSQL = "INSERT INTO tbl_Books ([Date], VALUES '" & dt & "')" ' strSQL = "UPDATE tbl_Field_Visit SET tbl_Field_Visit.Date = '" & dt & "' WHERE tbl_Field_Visit.[Field Visit Report ID] = " & fvr_id ' MsgBox "strSQL = " & strSQL, vbOKOnly ' dbs.Execute strSQL ' End If
Now I have a standard order entry form which works fine, my problem is with the subform: frmPurchaseOrderDetail ProductID Description Qty Nett
On my form Description and Nett are auto populated referencing ProductID but this information does not transfer to the table tblPurchaseOrderDetail. The main problem is that a nett price can occasionally chanege (inflation) but I need to be able to look back to a particular order for audit purposes and be able to see what I paid.
I'm sure there is w way round this, but I've been unable to figure it out. I've gone through loads of different threads on the forum and as a result am sure it can be done, I've also looked at the examples posted by several users, but none seem to approach the lookup quite from this angle, does any one have any idea...sorry for the long post, thanks.
I'd be very thankful if someone can please help me with this problem.
I have 1 Table. This Table is imported and contains data from Excel. It also contains fields I added manually. There is about 20 imported fields (full of data) and about 100 manually added fields.
Then I made a Query of this table. I made some calculations in this Query.
I then created a Form based on the Query. I then made a Combo Box. This Combo Box selects a customer, and then updates the other fields (the ones I imported from Excel) depending on the customer I selected.
So now what I want to do is this: I want the fields (updated from the query) and newly entered data to save to another newly-created table. Can someone please help me with this? Any ideas?
Help - I'm at a loss! I have a form that I am using for invoicing for a Trucking firm. On this form, I have three fields that I am having problems with. These fields are From, To and Mileage from a table named Location. The user selects "From" from a combo box then goes to select "To" from another combo box. The "To" field is a filtered list of only those locations which correspond to the "From" that was chosen. Once this is done, the corresponding mileage is automatically filled in and used for rate calculations. If the "To" that they want is not in the table, they can double click the field and a form to add a record to the table pops up. So far, so good.
My problem is that now the user wants to be able to add a record such as New York to be From and Miami to be To with 123 as mileage once and be able to have Miami as From and New York as To with 123 as the mileage if he needs on future invoices. Can this be done without having to enter it again?
I have a form to enter records in a table of staff attending training courses, in the form is a sub-form based on a query from a different table. When a staff number is entered on the main form the staff name grade etc appears on the sub-form, my problem is that I need the table to be updated from the main form and the sub-form. Is there a way of doing this?
I have a database with nine tables, and forms for data entry, no subforms. It is created for students to track all work required to complete their degree. When student information in added for a new student I need to update other tables with their student id.
The student information table has student ID defined as autonumber. How do I update the other tables with the value generated here, and should all the tables with student ID be defined as autonumber, or some other data definition?
Client records from tblClient contain a field called Client_CID (Primary Key), as the Client ID. There are also fields Client_HIGH_FILE_NO, a numeric value of the last case number assigned to the specific client and Client_PREFIX that contain a unique three letter prefix that identifies the client.
Case records from tblCase contain a field called Case_CFN (Primary Key), as the Case File Number. tblCase also contains a field called Client_CID that contains the Client ID associated with the case (obtained from a combo box lookup from tblClient).
My form is frmCase bound to tblCase.
The Case_CFN is constructed by combining the value of the selected Client_CID’s Client_PREFIX with the value of Client_HIGH_FILE_NO plus 1.
I am constructing the Case_CFN on the before update event of the combo box for selecting the client. The resulting Case_CFN may appear as follows
ABC10001
Where Client_PREFIX = “ABC” and Client_HIGH_FILE_NO = 10000
Now, I need to increment Client_HIGH_FILE_NO in tblClient by 1, meaning I need to set the value of Client_HIGH_FILE_NO for the selected Client_CID to, in this example, to 10001.
Questions:
1) Is anyone familiar with this type of number scheme generally and if so any ideas?
2) Can anyone tell me how to update the value Client_HIGH_FILE_NO for the selected Client_CID?
I have a table holding clients data, I need it to work out the age of someone when an application is made, which I would like to be stored on said table. I have two fields [DOB] and [signed date], which I have used created a query with and an (unbooud?) field called age at application with the expression =DateDiff("yyyy",[DOB],[Date signed])
This works fine when I run the query, but I am unsure of the new next step of how to commit it to the table and even if that's possible.Ideally I would like this to run behind a form maybe using some click event after the [signed date] field has been entered.
I have a form that has combo boxes and text fields (as well as sub forms). There is also a button linked to some code that says'
Private Sub cmdQuote_Click() 'Creates quote date and prints quote Me.QuoteDate = Now() Me.cbAgentID.Requery DoCmd.OpenReport "Quote", acViewPreview, , "BookingID = " & Me.BookingID End Sub
When the button is pressed the QuoteDate field (it is bound) should be be populated, but unfortunately it is not. I have played with refresh and requery but cannot derive a solution.
I have two tables, tblCountry and tblLocation. With the following structure
tblCountry ID Name Text
tblLocation ID Country_fk Name Text
As you can guess tblCountry lists all of the countries, tblLocation lists all of the locations in each country, the tblLocation.Country_fk field is linked to tblCountry.ID.
I want the user to be able to edit [tblLocation].[Text] using a form. They simply select the country and then the location using combo-boxes and then add or edit the content using a textbox.
In my form I have a combo-box that displays the country names, the RowSource is set to SELECT [tblCountry].[ID], [tblCountry].[Name], FROM tblCountry ORDER BY [Name];
I then have a second combo-box that lists the locations for the selected country. This uses an AfterUpdate() procedure to select [tblLocation].[ID] using an SQL query based on the value of the country combo-box. I.e:
SELECT [tblLocation].[ID],[tblLocation].[Name],[tblLocation].[Text] FROM tblLocation WHERE [Country_fk] = " & Me.country_box.Value & " Order By [Name]"
I want to be able to have a textbox that then displays [tblLocation].[Text] for the selected location. Thats where the problem arises. I can't find a way that will let me display any content thats available for the selected location AND let me edit it. I've tried using UpdateAfter procedures, different bindings (tables, queries based on the value of location combo-box).
Can anyone suggest how I can display [tblLocation].[Text] based on the value of the selected country/location and be able to update the information via a textbox?
This is my first post, but I've been lurking for sometime. I'm grateful for all the great advice given here; despite my efforts, I can't find anything directly related to what I'm doing, though.
I have a form that is populated from a query. The query has some calculated fields and some direct selection fields from a couple of tables. One of the direcly selected fields is one that I'm trying to populate from the items in a list box.
On this form, there are two list boxes, List1 and List2. The user makes selections in List1 and clicks a command button, which runs code so that the second list box is populated with the items from List1. This was shown here:
MS Article (http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnofftalk/html/office03022000.asp)
I actually just used this code and made changes accordingly so that this feature is working perfectly. However, the items in List2 need to be updated into a table's field, and this is where I'm having the problem.
I've got List2 bound to the proper field in the query, and I can manually run that query and make changes in that field fine. What I can't figure out is why I can't get the ItemsData property of the List2 control in there. For ease of code, I've added a line that copies the List2 rowsource variable to another variable so that the values can be used elsewhere. I can't seem to get the field to receive the variable in VBA, and I can't figure out how to get the values back into the query so that the query's source table is updated.
Any clues? Or is this unclear? I'm happy to give any further information. I've been working on this for more than a week, trying different things, and I'm at wits' end.
Okay I've looked around but haven't found an answer to this, if there is one in the forum please forgive me. I've created a database to help track employee passwords for differnt system I placed and Audit Trail on the form (the example from Microsoft) however it updates only the form and not the table and I need it to do both. Please Help!
I have a table which is used to store info regarding medicines dispensed. I also have a corresponding Form to enter data. The fields in Table are
ID- number Dispensed Date- date with dd/mm/yyyy format Dispensed Type- text Quantity- no. of days Next Collection Date- date with dd/mm/yyyy format
The Form also contains same fields but it has a calculated field for ( Next Collection Date) where i calculate date using Dateadd function. Also the form has a Datasheet view. So records are added when I press Tab or Enter at last field.
Now the problem is the calculated dates arent getting updated in the table. And this is a huge problem as i have to run a query later where i will put a criteria on Next Collection Date.
And I can display any existing question and make updates to the question and answer, that works fine. BUT, what I want to do is update which category a question is in. If I change the Category in the form, it updates the 'Category' in the Category table. What I want it to do is update the CategoryID in the question table.
I decide to add a new field to its related table. I always wait to create the form until I think my table is complete, but sometimes I just end up needing to add more info. Is there a quick way to update the form to include my new fields?
I have created a Public Function that would get a new Production Instructions number based off the [PI Number] of Tbl_Production_Instruction table.
I have a form that people will put in all information but the PI Number, then when ready they will click a button to update the PI Number. I place an unbound txtbox that will be hidden, with the control source to =NewPINum(), but when I tested the see if the unbound txtbox was populated with the new PI Number it was blank.can't figure out what I am doing wrong.
Code: Public Function NewPINum() As String Dim vNum As String Dim strYYMM As String Dim getnextPI As String strYYMM = Format(Date, "yy") & "-" & Format(Date, "mm") & "-" If strYYMM = Left(DMax("[PI Number]", "Tbl_Production_Instruction"), 6) Then vNum = Right(DMax("[PI Number]", "Tbl_Production_Instruction"), 3) vNum = vNum + 1 getnextPI = Format(Date, "yy") & "-" & Format(Date, "mm") & "-" & Format(vNum, "000")Else vNum = "001" getnextPI = Format(Date, "yy") & "-" & Format(Date, "mm") & "-" & Format(vNum, "000") End If End Function
Sorry this is so long but I am trying to make it as detailed as possible...
The Setup
My database is similar to the sample "Service Call" db. I have a main table called "tblTT" which has an autonumber primary key. The table also contains several foreign keys such as UserID (not an autonumber) from "tblUser", TechID (also not an autonumber) from "tblTech", etc. I have the relationships setup with "Enforced Referential Integrity" for both updating and deleting records. Each relationship has a RIGHT OUTER JOIN ("Join 3" in access) so that all records from child (tblTT) and only equal from parent (tblUser, tblTech, etc.) will be included. I have a form for nearly every table which serves different purposes but the main function of the DB is to create new Trouble Tickets (TT's), a.k.a. service calls. Therefore the main form used is my "frmTT" form in add mode. The form contains all the fields from my "tblTT" table and contains (directly) no fields from any other table (I guess indirectly it contains fields from all the parent tables...).
The Problem
When I pull up "frmTT" and try to create a new Trouble Ticket for a user that does not yet exist in the table "tblUser" I get the error "You cannot add or change a record bcause a related record is required in table 'tblUser'".
What I want is for my users (the "Techs") to be able to create a new Trouble Ticket without having to worry about populating the "tblUser" table (and other parent tables) first.
My Solution
I was going to (and unless someone can find an answer for me still will) fix this using VB script by setting up a query to check all the parent tables for the values in their corresponding fields in the form. If the query returns no results an "INSERT INTO" statement will run to populate the parents tables so that the form will save itself into the Trouble Ticket table ("tblTT").
I feel that this is a huge work around and not the proper fix. I would prefer to do this the right way both to have a correctly setup DB and for future reference. Can anyone help me with this?
I Work for an NHS organization. A department here orders prescriptions and sends them out to Gp Surgeries. I have been tasked in designing a database to make this easier for them.
Prescriptions arrive on a Pallet. Each pallet has 100 Boxes of prescriptions on it. Each box Contains 2000 Individual prescriptions. I have a table which contains the following:
Box Number Serial Start Number Serial End Number
When the user enters the first box number and the serial start number, i need it to calculate the serial end number and insert another 99 rows into the table and also calculate the serial start and end numbers for these other 99 records.
Using Access 2010. Fairly new to automation and macros.I have two tables (tblProductReceived and tblBins) and a form (frmProductReceived).A field in tblBins corresponds to a location the bin is at (named BinLocationID) and the tblProductReceived table tracks product that a specific bin has received.
What I need is for the tblProductReceived field PRLocationID ([tblProductReceived].[PRLocationID]) to be automatically populated with where the bin is at ([tblBins].[BinLocationID]) when selecting a specific bin in the form (frmProductReceived).
