Hi all.
I apologise if this has been a thread in the past but I couldn't find it.
What I have on my form is a dropdown which pulls data from a table (the table being durations of time in words, ie: One and a half days, Three days, etc.,) and I have just added a column that has the same durations in numerical form (ie: 1.50, 3.00, etc.,).
When the user is entering job data and selecting how long the job will take, the 'words' will be selected in the dropdown list and appear on the form and, subsequently be used on job sheets.
What I need is numerical value to go into a Text Box next to the dropdown and this is proving difficult for me to work out how it can be done.
I'm trying to filter my table so that i can make it a query. The data in the Facility is linked to another table with FacName and FacID. When i try to filter the data to create the query from the table, it says type mismatch. It's really bothersome....btw is there another way to create a filtered query?
I have a DAP that many users have access to.When opened the Dropdown is blank on some peoples and populated on others. Is there some setting that can cause this. I have checked to make sure that they have the allow ActiveX Controls to run files on this computer checked. Any other setting that may cause this? Thanks.
I currently have a button that opens a report. the report pulls from a query that has parameters set to "fromdate" and "todate". instead of using dates and parameters that pop up as blank text boxes, I would like to click the button, have a form pop up with a combo box to select all of the options available (currently 23 options) and then click a button to make a report that only displays the record (1-23) selected. I do not need any time constraints because as the databases get updated with more records, there would be more than 23 options to choose from.
I have a form bound to a table which has 20 (name)fields and 1 date per record. A user fills in this form first to indicate which people are present this day. I know it would be better to use 1 name per record but that would in this case not work since the form must show all names for that day before saving and closing.
I have a different form where I use 4 combo boxes and a date field. The values that can be selected in the combo boxes should come from the 20 names on the first form and with the same date as the other form. So only 4 people of the 20 indicated as present on that day can be selected to have performed some task.
I know how to select with a combo box from different records, but how would I do it from different fields in the same record? And then also for a particular date?
I have a form where I have two drop down list box.The first list box is called Transaction_Type. It contains three values: Created, Allocated and Sold
The second list box is called Product_Status. It contains 6 items: Allocated, Produced, Reworked, Shipped, To Be Produced, Unallocated.
I have a products form. When a user created more inventory they will selected in the drop down list create, then a quantity. Then I would like the status of the product to update to "Unallocated".
When the user placed an order but doesn't finish it they will choose the status of the inventory to be allocated so I would like the product status to be updated to allocated automatically.
They other status the user will choose them self and do not need to be linked to each other.
In my vba code I have tried with the OnClick and AfterUpdate sub procedures with the following code.
If Me.Transaction_Type.Value = "Created" Then Me.Product_Status.Value = "Unallocated" End If If Me.Transaction_Type.Value = "Allocated" Then Me.Product_Status.Value = "Allocated" End If
Yes when i select "created" from the drop down list it does not change product_status to say "unallocated"
I am currently developing an app with MS-access. I need two drop boxs on the same form. First is states and second is cities. When user selects one state from the first dropdown box, the second dropdown box will only display the cities that in the selected state. Is that possible by using ms-access??
i have a data access page, which as a querry in it.
When i set dataentry true, none of the recrods are visible.
but, when i set dataentry false all the records are visible, here i have to change a value (ex; change a value in drop down ) which should get saved into the data base,
I must create a database for the company that I work for that covers the maintenance history of our stone crusher plant. In this database I have two dropdown lists. The first one is for the equipment and the second one is for the different types of parts that has to be replaced or fixed.
Not all of the equipment uses all of the listed parts, but some parts are used on more than one type of equipment.
I have already created a database that lists all the equipment and another one that lists all the parts.
What I want to do now is create a Yes/No box for each type of equipment so I can mark which parts is used by which equipment.
Then you must be able to select the type of equipment from a dropdown list and then select from a dropdown list that only has the parts that is used by the piece of equipment.
I have a listbox with a record in it for every record that is entered on another form. To add a new record, you press the button Add New which I made. That takes you to another form, you can enter a new record and close that form.
I then want the listbox to requery and show the new record. I have tried requering the listbox on close of the other form, I have also tried doing it on the original form's Got Focus event. None of this works.
I have a form with several controls. Among them are 3 in particular:
Vendor Price - Unit cost with no tax Unit Price - Vendor Price w/tax Old Price
What I am trying to accomplish is a way to track what previous costs were by having the Old Cost control populate with the Unit Price controls value when there is a change to either VP or UP either due to new cost or new tax rates.I found a bit of code online but was not able to get it to work for me...probably because I haven't a clue of how to structure it for my needs.
Table name :TblMain Field 1 : Bkg_Number (text) field 2 : Container no (text) Field 3 : Size (text) Field 4 : Weight (number)
Table Name : TblBooking Field 1 : Bkg_NUmber(text) Field 2 : Customer (text) field 3 : Vessel (text) Field 4 : Voyage (text) field 5 : Ttlcntrs (number)
First feeding data in the Tblbooking and creating a booking number. In the same time enters Total containers (ttlcntrs) for the booking. Then, importing some data to Tblmain by using Excel. Booking number is one of the columns importing. My question is, if number of records in the excel file, exceeds the number of total containers (Ttlcntrs) defined in the Booking table, error msg should be given and stop the import process.
I've got some forms that I've set to lock controls based on an added tag. I have a loop that goes through the entire form and disables (controlname.enabled = false) or locks (controlname.locked =true) all the controls with that tag.
This appears to work fine when the form is on a blank record but when an existing record is opened, the controls that have data in them are no longer locked or disabled (empty controls are still locked). Is there an explanation for this behavior? I don't want to disable the entire form because there are controls that I want the user to be able to always access. I started by just disabling them, then when I noticed the problem I tried locking them instead but it happens with both. Is there another property I can try that will really lock them if they have data in them or not?
So I am creating a Complaint Tracking Database with Access 2013. In my 'complaint entry form' I have added to ability to "Open" and "Close" the complaint. While the complaint is open the user is able to enter/edit data in the complaint (new or old). When the complaint is "Closed" (done so with a button on the form that prompts the user to enter a date of their choice) the user should not be able to enter/edit data in the given complaint. In my original thinking, I placed checks on various events (on load, after update, on click) that checked to see if the current complaint had a date in the "Close date" field.
If the close date field was null then that meant that the complaint was open and the the controls would NOT be locked. If the close date field was NOT null (i.e. a date was present) then the complaint was closed and the main form fields were locked but the data was still viewable and unless they "re-opened" the complaint they could not change the data.
Now, in the complaint entry form, I have a subform that acts as a action tracker that is used by the user to keep track of the actions taken on the complaint (i.e. they requested documentation from such and such on this date..etc). My problem through all of this is upon closing the complaint and locking the main form controls, my subforms data just vanishes! At first I figured the problem might be with the linking of master and child fields, so I made sure that I left the ID in the main form unlocked when I loop through my controls during the locking process. This did not solve my problem. Code below:
Private Sub Form_Load() Dim ctl As Control If Not IsNull(Me.close_date) Then Me.FormHeader.Visible = True Me.btnClosed.Enabled = False Me.btnOpen.Enabled = True For Each ctl In Me.Controls
I have a report that tracks scores for our employees. From the report, you can click a button to add a new score in a form or edit an existing score(frmscoretracker). On this form there are two subforms, in a tabbed control to track additional information about the score; what areas were marked down(Trends), and was it a failing score(AutoFail).
When this form opens I have it programmed to only show the subform if there is data in it. The goal being, if I am adding a new score and there is no existing trends or Autofails for this new record, neither subforms will show - I will add an after update even to show either trends or autofail depending on the score recorded. Also, if someone chooses to edit the score, whatever subform with data, will show as well.
When someone clicks to add a new score, opening this main form to a new record, both of the tabs show. However, if the form opens to an existing record, the appropriate tab shows. Here is the code
Code:
Private Sub Form_Open(Cancel As Integer) 'If the subform has a record, the tab is visible, if not, the tab is not visible If Me.frmtrends.Form.Recordset.RecordCount > 0 Or IsNull(Me.Trends) Then Me.Trends.Visible = True Me.TabCtl33.Visible = True Else Me.Trends.Visible = False End If
[code]...
Both tabs are set as not visible in the default settings. Is there something in this code that is triggering then to be visible when there is no record in the main form?
There are 4 unbound dropdown list box that will have a default value of empty string. All 4 must have values entered (data is required).Once all 4 are required - the bottom 5 text box will become enabled (optional data).Forcing the user to click on a Validation Button
Some users type then use the mouse to select the next.Other users type to select then tab.The trick is: After filling in the 4th listbox and validating all 4 have values, the event must trigger code to enable the 5 optional text boxes below.This provides a seamless data entry environment.
I have been doing this in other places, but the transisition after the last required field is complete gets ugly.If Trim(cmbBoxname1 & "") = vbNullString ' check all 4..If it is the 4th one, the event seems not to happen quick enough for the bottom 5 text boxes to be enabled so the user can continue with data entry.
I am very new to Microsoft Access, and hope somebody can help me. Apologies for what I am sure is an easy subject - but I dont know what keywords to search on!
Basically, I need to have a drop list of say 5 different products. Now depending on the product will lead to different field boxes (say each product has 15 fields, 10 which are the same, but 5 which are unique to each product). I basically want the form to change dependent upon the product type. As I say I am very sketchy on this, so feel free to treat my like an idiot! If anyone could give me a hint as to what help topic this relates to, or give me a brief overview of what to do, that would be very much appreciated. The information will be downloaded from an ODBC if that makes any difference.
I'm pulling my hair out. I'm making a seemingly simple tex book database.
I have 2 tables. AuctionItems and AuctionBidders. I have three forms. One to enter AuctionItems, one to enter AuctionBidders, and one to enter Transactions. The AuctionItem Table has a column for the winning bidders ID WinningBidderID.
On the Transaction form I list the acution item data and also want to put a listbox that allows the user to choosed the AuctionBidder that won this auction.
I cant figure out how to make this listbox. IIn the listbox dropdown, I want it to show the Bidders last name, first name, etc in the listbox, but then store only that persons BidderID in the AuctionItems table field WinningBidderID. I also want to display the bidders information on this form once selected. I cant figure this these things! Its driving me crazy.
Can someone give me some help or link me to an example database?
I am having a small issue with using the .dropdown command. I am using a combobox as a search tool with the code Me.combo107.dropdown in the On Change Event. I am using the Not In list property set to yes to trigger a custom message box stating that the number is not a valid project. If the project is on the list and you hit the enter key, code in the after update event sets the focus to another field on a seperate tabbed page.This works fine if you hit enter to select the project. The problem I am having is when a project that is on the list is selected using the mouse click instead of hitting enter, the focus is set properly to the next page, but I get the following error: Run time error '2185' . You can't reference a property or method for acontrol unless the control has the focus.
I was able to get it wo work better by putting the me.combo107.dropdown code on the Keypress event. The problem I have with this method is that if the code is not on the list, the dropdown box covers the custome error message that is triggered in the not in list event. I tired doing some setfocus code before the message box triggers, but it doesn't seem to want to move. Any help would be much appreciated.
Contact Name ___________ Phone _______________ Address _______________ Town/City ______________ State _____________ Post Code ____________ Job Date _______________ Due Date ____________ Description ____________ Amount _______________ GST _______________ Total Inc GST ___________ Invoice Number ________________
Notice that the first 6 fields (contact name, phone, address, town, etc) are the same as the fields in the previous table.
What i want is to be able to make the field "contact name" a drop down box, which when a contact is selected it changes all the other fields (phone, address, town, etc) to correspond with that contact.
I know that all that may have sounded a bit comlicated, but that is the easiest way for me to put it. Im sure this is really easy for you pro's.
Thanks heaps :) ps. if unsure of anything i wrote plzzz ask :)
Question I am looking at some annoying Access database for a charity and got stuck on trying to make something work that they believe used to
Two Tables
Venues pK Venue ID Venue Name Venue Capacity
Booking pK Venue Name Addr1 Addr2 Addr3 Ect
They have a query call capacity check which does the following Count Occurrences of Venues then takes this away from venue capacity
Essentially they have a standard access form of the Booking table with a drop down box and want it to only validate if seats are still free at a venue eg if the current count for venue is less than the venue capacity.
I have a dropdown box called Status on my form. I want to be able to limit what people can move an item to a specific status. In this case, I only want a PM or Developer to be able to move to the "Development" status. There are only 2 IDs to check for and if their ID comes up, it will let it move to that status, but if not, it will pop up with a message box. I have the code in the "On Change" event of the field. The code works great if I just have one ID, but if I try to do an "OR" and put the other ID, it won't work. Here is my code that works (user1 and user2 in the examples are the developers):
If Status = 7 And cu <> "user1" Then MsgBox "Only PM or Developer can move to this status. This item will be moved to the status Out For Estimates. Please notify developer.", vbOKOnly Status = 6 End If
However, if I change to this:
If Status = 7 And cu <> "user1" Or cu <> "user2" Then MsgBox "Only PM or Developer can move to this status. This item will be moved to the status Out For Estimates. Please notify developer.", vbOKOnly Status = 6 End If
Then even if your user ID is "user1" or "user2", it gives you the msgbox and it shouldn't. Any ideas? I even tried just using "Or" between the two userIDs and then got a datatype mismatch error.
We've created an Access 2000 form with dropdown boxes. The RowSource Tpe is Table/Query and Row Source is a SELECT query pulling results from a single table and the overall form is pulling from a complicated query.
When we display the form everything is as it should be. We click the Field 1 dropwdown box and it displays the correct resultset. We then scroll to the bottom of the displlay to add a new record -- clicking the Field 1 dropdown for the new record area reveals the same result sets. This is correct. Now closing the form and reopening, we skip clicking the first record's field 1 and go directly to the bottom of the form to add a new record -- the dropdown is empty. Scrolling back to the top of the form and clicking the first records field 1 also shows it empty. Odd.
Why does Access not reveal the dropdown result set if i access the "new record" area first?
I want to create the dropdown list on the form, the dropdownlist will have 5 values, I want to give out description of each value when the user move the mouse on the value. Does the dropdownlist control have this option?
