Use Two Criteria On Open Event
Feb 15, 2006
Hello, I am trying to find a way to open a form with a subform on a specific record (for the form and the subform), I came up with the following but keep getting a mismatch mistake which means me think I am not doing it right.
What would be the apropriate way to achieve what I am trying to do?
Dim stDocName As String
'To Link to 1) Drawing File ID on main form
Dim stLinkCriteria As String
'To Link to 2) Drawing ID on subform
Dim StLinkCriteria2 As String
stDocName = "FrmDrawingDetail"
stLinkCriteria = "[DrawingFileID]=" & Me![DrawingFileID]
StLinkCriteria2 = "Forms!stDocName!SFrmDrawingDetail.Form!TxtDrawingI D=" & Me![DrawingID]
DoCmd.OpenForm stDocName, , , stLinkCriteria And StLinkCriteria2
View Replies
ADVERTISEMENT
Sep 2, 2005
I'm trying to open a form based on another form and have the following code in the Open Event:
Private Sub Form_Open(Cancel As Integer)
On Error GoTo Err_FormOpen
Dim strForm As String
strForm = "frmProductionBatch"
If IsLoaded(strForm) Then
Me.ProductName = Forms![frmProductionBatch]![ProductName]
Me.BatchNum = Forms![frmProductionBatch]![BatchNum]
Else
End If
Exit_FormOpen:
Exit Sub
Err_FormOpen:
MsgBox Err.Description
Resume Exit_FormOpen
End Sub
It works however I get an error message stating that I cannot assign a value to this Object?
What is going on here?
View 2 Replies
View Related
Feb 4, 2005
Some of the things that bring me screeching halt really surprise me. I swear, this sounds like it should be so easy....
What I need to do is check, when the user clicks on a button, whether a specific table that is going to be modified/deleted later in the click code is already open. If it is open, I will msgbox the user to close the table first and exit the sub.
Any ideas?
All help, as always, is much appreciated!
John
View 4 Replies
View Related
Sep 11, 2013
I need to close a form after checking a condition in the Form_Open event.
I expected that by setting Cancel = True that the form will close but this does not happen.
DoCmd.Close also does not close the form.
View 4 Replies
View Related
Aug 12, 2014
I've taken a break from Access for a while, but I'm back at it again and having some difficulty. I am trying to open a form with a timer to state that the database is going to shut down in five minutes if they don't respond. I'm obviously using the wrong code. I've been trying to use the following:
Private Sub Form_Timer()
DoCmd.OpenForm "frmWarning"
If Forms!frmHidden!chkActive Then
Forms!frmHidden!chkActive = False
Me.TimerInterval = 300000
Else
DoCmd.Quit
End If
End Sub
It crashes on the 'DoCmd.OpenForm "frmWarning"'
View 3 Replies
View Related
Jun 7, 2015
How can I play a sound with event On Open Form.
View 13 Replies
View Related
Dec 15, 2014
I have a report, on a control tab, on a main form.
On the form are two buttons: one to show all items, and one to filter them based on a boolean field called showitem.
The buttons work with the code below.
What I want to do but cannot seem to figure out is to have the report default to no filter.
The bound query has no criteria.
I'm trying to set the filter property via the on open or on load event and even if I isolate the report, cannot seem to reach it.
Code:
Private Sub b_hide_items_Click()
Me.Profile_Timeline_wNotes_subreport.Report.Filter = "timeline.showItem <> 1"
Me.Profile_Timeline_wNotes_subreport.Report.FilterOn = True
Me.Profile_Timeline_wNotes_subreport.Requery
End Sub
Private Sub b_show_all_Click()
Me.Profile_Timeline_wNotes_subreport.Report.Filter = "timeline.showItem = 0"
Me.Profile_Timeline_wNotes_subreport.Report.FilterOn = False
Me.Profile_Timeline_wNotes_subreport.Requery
End Sub
View 14 Replies
View Related
Jul 29, 2013
There are around 100 customers.And on application open, need to check if customer has paid invoice. If the customer has paid/not paid need to change the status accordingly. Form on open event changes status of only the first customer.Form on current changes status only if we move to the specific record. Is there an event to trigger to check the entire table records on application open?
View 9 Replies
View Related
May 1, 2013
I need to hide a row in my report for example (in Detail Format event of the report):
If me.txtReleased = "YES" then
hide row
endif
View 4 Replies
View Related
Apr 15, 2013
I have some code on a button that opens a form and changes the caption of a label:
Code:
DoCmd.OpenForm "frmRepair", , , , , , "CancelNo"
Forms![frmRepair].Form.[lblmain].Caption = "Missing Parts"
This code works well and frmRepair opens with the updated label caption. The original value was "Return/repair Information"
A few other things need to change on frmRepair depending on this caption as well as the values of some other fields, so I use the following code in the onload event (although I later tried the onopen even)
Code:
'Disable labels button if there is no RMA and the item is a repair
MsgBox Me.lblmain.Caption
If Me.lblmain.Caption = "Return/Repair Information" Then
Me.txtRMA.SetFocus
MsgBox Me.txtRMA.Text
[Code] ....
However, I cannot get this to work as the "if" statement always returns "Return/Repair information" and not the modified caption. The message box confirms that this is the case.
I suspect that this has to do with the point in time that the frmRepair loads or opens and when my code enters the modified values.
View 13 Replies
View Related
Oct 10, 2013
I have a table that holds the SQL texts for ca. 1000 Select queries (mostly minor variants that are used to programmatically swap out RowSource strings for combo boxes). I'd like to have a quick and easy way to open/review/modify these queries.
One strategy would be to display the SQL strings in a field on a Datasheet form, then use an onClick event on a text box linked to the SQL-holding field (or perhaps an onClick event tied to an unbound text box on the form) to open the associated query. That would allow me to view the SQL of the query that I want to open, allow me to quickly scroll through the list of stored SQL texts, and give me options for sorting or limiting the SQL-texts displayed in the datasheet form.
But, I can't seem to get the onClick event to work. The problem seems to be that I can't figure out how to pass the SQL string contained in the field to a function that will use that string to open the query .
View 10 Replies
View Related
Jul 24, 2013
I have a report that tracks scores for our employees. From the report, you can click a button to add a new score in a form or edit an existing score(frmscoretracker). On this form there are two subforms, in a tabbed control to track additional information about the score; what areas were marked down(Trends), and was it a failing score(AutoFail).
When this form opens I have it programmed to only show the subform if there is data in it. The goal being, if I am adding a new score and there is no existing trends or Autofails for this new record, neither subforms will show - I will add an after update even to show either trends or autofail depending on the score recorded. Also, if someone chooses to edit the score, whatever subform with data, will show as well.
When someone clicks to add a new score, opening this main form to a new record, both of the tabs show. However, if the form opens to an existing record, the appropriate tab shows. Here is the code
Code:
Private Sub Form_Open(Cancel As Integer)
'If the subform has a record, the tab is visible, if not, the tab is not visible
If Me.frmtrends.Form.Recordset.RecordCount > 0 Or IsNull(Me.Trends) Then
Me.Trends.Visible = True
Me.TabCtl33.Visible = True
Else
Me.Trends.Visible = False
End If
[code]...
Both tabs are set as not visible in the default settings. Is there something in this code that is triggering then to be visible when there is no record in the main form?
View 4 Replies
View Related
Oct 29, 2013
I have some code for a button on click event to open a form and select the record which corresponds to a value in an unbound text box. The code is:
Private Sub Command25_Click()
On Error GoTo Err_Command25_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmOpenPatientRecord"
[Code] ....
This works fine when I put in a 10 digit NHS number but opens a blank record when I enter a four digit or six character/digit PatientNumber. Both patient number and NHS number are text fields in the underlying table.
View 14 Replies
View Related
Oct 9, 2013
We have an ActiveX grid control, 10Tec iGrid, written in VB6. One of its method, Group, used to group rows, raises the AfterAutoGroupRowCreated event so the developer can adjust the look and contents of every group row created during the automatic process of grouping.
When our ActiveX grid is hosted on an MS Access form and we call the Group method while populating the grid in the form's Open event, the AfterAutoGroupRowCreated event isn't triggered. But this event definitely works as expected in other development environments, and even in MS Access if we call Group from the form's Load event.
Is it a well know issue of MS Access, when any events of ActiveX controls aren't triggered while "executing" the Open event
View 1 Replies
View Related
Nov 16, 2005
I was wondering if it was possible to add a parameter to the record source Query of a form depending on the value of an other field on the open event of the same form?
I was thinking to use 3 Sql statment SQL1, SQL2, SQL3, on the open event of the FrmOpen.
On Open then the RowSource of FrmOpen =SQL1
If field? = "A" Then
the RowSource of FrmOpen=SQL2
Else
the RowSource of FrmOpen=SQL3
End If
I did try but it doesn't work so I needed to know if it was possible to achieve this or not?
View 1 Replies
View Related
Jun 7, 2013
Making a small database, Got 1 Table.
1. ContactDetailTable
Got 3 forms.
1. ContactIDForm
2. ContactInfoForm
3. NewContactFrom
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
View 10 Replies
View Related
Jan 19, 2006
okay, i have presented my database to my boss.
apart from the ongoing problem of trying to get a listbox and subform the same to the user, he has asked me to do something more
he wants me to be able to select from the menu, a selction that will open up a pop up form, from which notes can be made relating to the originating form
i presume the linking criteria will use the form name plus the record criteria the originating form is bound to
any help on how i go about this will be greatly appreciated
View 7 Replies
View Related
Apr 17, 2014
How to open FORM which has "inner join" in source?
Code:
...
Dim idRS As DAO.Recordset, ShowIdentity
strSQL = "INSERT INTO tblZlecenia (id_zlecenia_info, DataPrzyjecia) VALUES ('" & _
ostateczne & "', " & _
Format(Date, "#mm/dd/yyyy#") & ")"
[code]....
View 5 Replies
View Related
Apr 9, 2014
I'm trying to open a form with filtered criteria using this code:
Code:
DoCmd.OpenForm "Edit_Mission", acNormal, , "[Report_Date]=# " & Format(Me.Date, "dd/mm/yyyy") & "# And [Supporter_Name]='" & Me.Supporter & "'"
it used to work on access 2010 but now on access 2013 I get a blank form.
View 2 Replies
View Related
Nov 7, 2006
I have code for a button click event. Essentially I have a main table form that I use to enter customer data and info. I also have a button that I use to add that customer to a separate table that I use for special Customers. My code copies all the data I need copied to my other table, so I wont waste space here typing my code that actually copies the data to the new table. What I will list are the two commands I am using after that code, to close the current form (the one with the button) and open the form for entering special customer information (the form to edit data on my other table). It works flawlessly, but when it opens the other form, it opens to the first record. I want to know how to make it open to the record which I was viewing when I clicked the button to copy the data.
DoCmd.OpenForm "Special Customer Data Entry", , , Number = Me.Number
DoCmd.Close acForm, "Customer Data"
View 9 Replies
View Related
Jun 18, 2015
What I want to do is set the criteria of a query to the value on a form if the form is open, and set it to a different value if the form is closed. I tried using a function on the OnLoad event of the form to set a variable called IsOpen to 1 if the form is open, and reset that variable to 0 when the form closes, but when I tried using the variable in an IIF statement in the query criteria, I got a "Its too complex" error.
Here's what I really want to do. I have a very complex form with multiple tabs and subforms. The subforms populate based on a query of what is selected and loaded into a textbox control on the first tab of the form. The first tab has a subform that is based on the main table. Rather than recreate that form, I want to copy it and change the rowsource on the first tab to a subset of the main table, and tell the query to use the textbox on the new form so I don't have to go and replicate all the other subforms. Is there a way to do that or am I just screwed?
View 3 Replies
View Related
Aug 5, 2013
I have one form which have two multiselect listboxes. They work, but every time when I choose id_organizacija from listbox popup enter parameter value comes up.
I am already tried to put id_organizacija in [ ] but that didnt solve problem.
Code:
Set ctl = Me.lstEmployees
For Each varItem In ctl.ItemsSelected
strWhere = strWhere & ctl.ItemData(varItem) & ","
Next varItem
Set ctl = Me.lstOrganizacija
[Code] ....
View 12 Replies
View Related
Jul 16, 2014
The code below allows me to open a publisher document that is already merged to the current record. What I need is to allow the user to open the document according to the group they are reviewing. How to accomplish this?
For example:
IF Group = A1 OR B1 THEN OPEN AB_1.pub
IF Group = A2 OR B2 THEN OPEN AB_2.pub
IF Group = A3 OR B3 THEN OPEN AB_3.pub
Dim pubApp As Publisher.Application
Dim pubDoc As Publisher.Document
Set pubApp = New Publisher.Application
Set pubDoc = pubApp.Documents.Add.Application.Open("c:Publishe rAB_1.pub)
pubDoc.ActiveWindow.Visible = True
View 3 Replies
View Related
Jun 3, 2014
I have a table called estimates and a field in that report is called RFA and this is a checkbox. How can i open a report i created (called EReport) for all rhe records in this table that have the RFA field checked (therefore true).
View 2 Replies
View Related
Dec 15, 2006
Private Sub btncard_Click()
Dim stLinkCriteria As String
DoCmd.RunCommand acCmdSaveRecord
stLinkCriteria = "[jobref]=" & "'" & Me![jobref] & "'"
DoCmd.Close
DoCmd.OpenForm "k_job_card", , , stLinkCriteria
End Sub
this button code opens the k_job_card form.
the form opens and says 'Record 1 of 1, (Filtered)
i have a control on the form that opens.. and i am simply trying to assign a default value to that control..
it is a textbox.. for my jobtype field (text datatype)..
is there any particular reason why i cannot assign a default value to a control if it has been placed on a form that has been opened using a form filter?
this is how the Form Data tab is set at the moment..
View 3 Replies
View Related
Apr 23, 2014
MS Access 2010 accdb - Using TempVars open forms either for New Record or Edit Record.
Two sets of forms - One set works perfect but the other will not accept the criteria for New Record
MsgBox checks confirm the Variables are still valid in the 2nd form Open Event yet the If Then does not work.
Just before the If Then, an invalid use of Null message appears.
View 2 Replies
View Related