Using VBA Code To Import Tab Delimited Text Data
Oct 30, 2006
I have a table by name "newtab" and I was trying to import a tab delimited text file "newdata.txt" into newtab. The first line in the text file are the column names: SSN, Lastname, FirstName (all tab delimited though). The same field names exist in the destination file. However I am getting the error which says the "the field name SSN Lastname FirstName does not exist in the destination file" What could possibly be the problem? Since the field names are not separated in the error message, could it be that it is seeing all 3 field names as one and therefore cannot match them to the destination fields? Does that mean TAB cannot be used as the delimiter? Using the interactive IMPORT from access directly for the same files work really good though. However, I would like to do this programmatically since the files would be coming in weekly for me to load and they are many such files. The command I used is as below. Please I need help.
DoCmd.TransferText cImportDelim, , "newtab", "c:
eports
ewdata.txt", True
View Replies
ADVERTISEMENT
Apr 7, 2015
I am trying to import a non-delimited text file into access, but where there is a strict hierarchy to the records, i.e.
NAME:
AGE:
DOB:
etc. etc.
The field names are constant throughout the document but the pages are of variable length depending on what is in the fields.
View 1 Replies
View Related
Apr 2, 2015
I'm trying to import a pipe delimited text file into a table. I can import the entire table using the following code, but I only get one column of data (the entire data set in one column). If possible I would like to import with the columns defined or if not possible use some code for a function similar to text to columns.
Code:
DoCmd.TransferText acImportDelim, , "tblTest", "C:Work2015PPVMasterData.txt"
View 4 Replies
View Related
Feb 20, 2007
Hi,
I am attempting to import a .csv file into Microsoft Access. The .csv file is a raw data export from an online application used within the business.
One of the fields reported on within the file is unformatted, ie. "free-text". Some users are entering a comma within this "free-text" field, which is throwing my import table out of alignment.
Is there some way that I can continue to import the .csv file, but ignore any commas that appear within this one field.
Any advice would be greatly appreciated.
Thank you.
View 4 Replies
View Related
Aug 2, 2013
I'm trying to import a text file with 273 fields into two tables. I've been able to do this with the code I found on an old thread and I'm now trying to accomplish everything with one step. The file I'm importing is tab delimited text file. With this current code I'm only able to populate the first record in the table and then I get error message. (Run-time error '3265') (Item cannot be found in the collection corresponding to the reqested name or ordinal).
Code:
Public Sub ImportTextFile()
' to use the ADODB.Recordset, be sure you have a reference set to ADO
Dim rst As ADODb.Recordset
Dim rst2 As ADODb.Recordset
Dim strFile As String
Dim strInput As String
Dim varSplit As Variant
Dim intCount As Integer
[code]...
View 4 Replies
View Related
Aug 25, 2004
Hi
I need to create a command button to import a tab delimited text file into a table in Microsoft Access using VBA Code.
I have set up the button however I am unsure as to how I should approach it and what code i need.
If anybody has any suggestions I would be very grateful.
Kind Regards
Elaine
View 1 Replies
View Related
Nov 4, 2005
Here is the snippet from this company that explains how this file is delimited.
Each field is delimited by character 127, DEL. Try typing this by holding the alt key, then pressing 0,1,2,7 in sequence. Try representing it with your favourite programming language with "x7F".
Using Access I want to run the import wizard but am unable to specify this delimeter. Any ideas would be great. Thanks.
View 5 Replies
View Related
Mar 4, 2008
Let me preface this question with... I DID NOT CREATE NOR DO I HAVE ANY CONTROL OVER THE FILE I'M NEEDING TO IMPORT INTO ACCESS.
I've got a situation where I'm needing to normalize a delimited .CSV file on a routine basis. The .CSV file has 369 fields. When normalized correctly, the true data should only be about 60 fields.
I didn't think this would be such a hard thing... just import the first 255 fields into one table, and the remaining fields into another table. Then, using a query... normalize the database as necessary.
I've scoured this topic all over... I've seen solutions for "fixed width" files, but not delimited. The only helpful thread I've found says that this is possible only through very complicated parsing through the file.
That's where I'm stuck... This is definitely over my head. If anyone has any help on this I sure would apprecaite it.
View 4 Replies
View Related
May 21, 2007
For anyone that might be able to help me out, I'd very much appreciate it, as this is now number 2 stupid workaround that I'd like to resolve before I need counselling...;)
I have a Date/Time field that I'm importing into my database via .csv files. The field is setup like the example below in every .csv file:
4/2/2007 8:30:00 AM
Access keeps throwing errors and deleting all the field values in this field whenever I try to import. I know that Access does this when a Date/Time field includes data that is not delimited, but these field values seem to be perfectly formatted to me... what can I do to stop Access from chucking these on import?
Right now I'm just importing the data into a "text" field, and then changing it to "date/time" afterwards, but I'm worried that once the table gets too long I won't be able to re-index all those records anymore and my database will be useless since it depends on that field being "date/time" format...
All those better than I feel free to show me how and where I've been stupid:D
View 6 Replies
View Related
Mar 4, 2005
I used the get external data tab and went thru the process. everything looked good in the preview but when I clicked finish I got type mismatch errors and the data that was supposed to be in field 1 was in fieild 2 and so on.
View 1 Replies
View Related
Sep 8, 2014
I'm trying to build a query that can parse Delimited text to columns, for example I have the following:
ID,Name,Tel,Fax,Email,Directorate,DOB,AOCD,Reg,CD
I would like to convert the above in 10 seperate columnns within a query?
Is this possible? I know you can import delimited text to columns but that is not what i'm after for other reasons.
View 14 Replies
View Related
Sep 4, 2014
I have a csv file with one row containing delimited text via a comma
Example
1, James, Smith, Manchester, email, telephone, notes etc..
Think there are 50 comma separations all together. Anyway when I go to import / link my csv into access the data that is on the first row should it create individual fields where a comma has been placed... But it has doesnt quite worked, some of the fields are created and the rest have been put on a separate row! Rather than going to a new field. Rather having 50 fields I've got 21 fields and 3 rows or delimited text...
View 10 Replies
View Related
Nov 6, 2014
I have a text file that details every single incident that happened in the system. This means that it is extremely messy and non-comprehensible to a normal person due to the use of codewords and all.
Is it possible to scan through the document and insert the data into access, such that the different keywords are put as seperate events?
Ps, the number of characters between each event and data may not always be the same, so seperating them by that is not the way to do it. However, when I open the file in notepad++, I can confirm that each event is 6 lines.
E.g. Line 1 = Event timestamp, Line 2 = Event Name, Line 3 = Acknowledged or not, Line 4 = Acknowledged by who, Line 5 = Event Details, Line 6 = Application Owner.
Basically, the 6 lines are the 6 columns that I would need in my table. So, is it possible to separate out and read every 6 lines of data in the text file?
View 14 Replies
View Related
Aug 3, 2005
I had to delete a database so I exported selected records using export as a text file thinking I would get some sort of delimited text file that I could later use. Instead I got some sort of fixed length file with .............. between records and | between fields.
I'd like to convert this data to a tab delimited file.
How would I do this?
Thanks
View 12 Replies
View Related
Apr 27, 2007
With microsofts article, I have made to store multi options value of a list box in a text box with comma. However, since these are IDs being stored, I want these values to run a query and get results also.
But I am confused since have never used comma like in query
View 1 Replies
View Related
Nov 26, 2013
I am able to successfully export data from an Access 2010 Query to a Tab Delimited Text file without difficulty.My problem is that the Query includes several 'tick boxes'. The resulting text file shows the text boxes as 1 or 0 as appropriate. What I actually require is a Y/N result.To achieve the required Y/N result requires some fiddly find and replace editing which is complicated by the fact that the query also contains telephone numbers incorporating 1 & 0, This then requires further editing of individual records to convert misplaced Y/N back to 1/0. Is their any way that one can force the export to convert text boxes to Y/N rather than 1/0.
View 8 Replies
View Related
Jul 7, 2005
hello once again,
I need to import a text file into an existing table in Access. The text file has been imported once and is working well and everything. However, since I had to change some of the datatypes to be able to query the table correctly, I now cannot import the text file anymore unless I change the datatype of the table itself. Since someone other than I will be doing the imports from here on out, changing the datatypes everytime is out of the question. I was looking at the TransferText event, but I didn't seem to see anything about converting data types. I can think of two options, and neither are probably possible:
1. import using the wizard. Since I didn't see anything related to the types of data, I don't think this will work...
2.import using TransferText. This doesn't seem to give me any opportunity to change the datatypes either. Is there anyway to programmatically change datatypes, or is there possibly an easier way that I'm overlooking??
thanks in advance,
*j
View 4 Replies
View Related
Aug 29, 2012
A little background. I need to export the results of a query I use to build a report. For Print Master software I need the "Field Names" in the text file as well as the data for a Mail Merge in Print Master (PM).
"The field name information in the file you have specified is missing or not correctly formatted. The first line of the file must contain the database field names. Make sure the "Export Field Names" (or similar) option is selected in the program from which you are exporting data."
Trouble is, when trying to export the report or query, Access has no "Export Field Names" option. It works if I first export to Excel and then from Excel to "txt" then to Printmaster. I would like to eliminate the Excel step. Therefore, how do or can I get Access Export to transfer the "Field Names" along with the field data?
View 8 Replies
View Related
Sep 20, 2013
I would like to export a table as a text file to a user defined location.
I have it mostly working, but not exactly as I would like. I'm stuck on the user defined location.
I have a Form that contains a subform and two command buttons.
The subform contains the table I want to export as a text file.
The text file has to be comma delimited, no qualifiers.
I have the transfertext command in VBA that works perfectly:
Code:
DoCmd.TransferText acExportDelim, "My Specification Name", "MyTableToExport", StrDirTemp & "input_" & StrPName & "NameCode" & StrDIAUnFormatted & "d" & ".txt", False
What I'm stuck on is the filepath. The file path changes everytime. So I would like to have either the open dialog box (I've tried many different versions that I found on the web.) or to search by the account name for the folder and place the text file in there.
Here is one that is closely working how I want it to:
This is a function that I found, that opens a dialog box for the user to select the folder location. It works, but I can't seem to get it to work properly.
It prompts, the location, then once you select it and press ok. It will add the folder name to the full file name, and place the file in the default root path. Not the selected folder path.
So in the end it will look like this:
D:1_MainMyFolderName_MyTextFileName.txt
I'm somehow stuck on getting to seperate the file path from the file name, so you it look like this:
D:1_MainMyFolderNameMyTextFileName.txt
Code:
Dim MSg As String
Dim SelectedDir As String
Dim SelectedDirFinal As String
Dim SelectedDirName As String
Dim StrFolder As String
[Code] ....
I think it should be something very easy, that I just need a pair of fresh eyes to look.
I've tried the Fileobject, FileFolder method, but can't get the quite work properly.
I've also tried wildcard methods as well:
StrDirTemp = Dir(StrFolder & StrPName & "*", , vbNormal)
But keep throwing up blanks.
View 2 Replies
View Related
Feb 21, 2007
Hi.
I have a db, where the main table is linked via an ODBC connection to a SQL server db.
Want I would like to do is, either by code or a macro, import the information from the ODBC link , rather than "File", "Get External Data" etc etc.
This way, the code or macro would run everytime the db is closed, and the information is stored in the db as a table..... just as a backup
I have tried the various "Transfer Database" with macros, but nothing seems to work
I don't know whether this would have any bearing on the answer but I do not have write permisisons on the SQL server, and it does not have a primary key.......as far as I am aware.
Many Thanks.
Frank.
View 2 Replies
View Related
Jun 26, 2014
I want to import HTML data which I get with email, to MS Access (2007). The problem is that files are badly formatted and standard import options are not avaliable for me.Basicly part of a file looks like that:
Code:
<tr>
<td style="font:bold 11px/15px Arial,Geneva,Helvetica;width:220px">Name</td>
<td style="font:normal 11px/15px Arial,Geneva,Helvetica">:</td>
<td style="font:normal 11px/15px Arial,Geneva,Helvetica">John</td>
</tr>
Before and after that there are many lines of code which is useless to me. Is there a way to access "Name", connect it to a row in my Access table and insert it's value (John) into the table?
View 10 Replies
View Related
Apr 22, 2013
I'm trying to import a few tables from a FoxPro database into an Access Database using VBA code. I know I have done it before and I remember struggling with the format last time.
DoCmd.TransferDatabase acImport, "ODBC Database", "ODBC;DSN=Hiremate;SourceDB=data-wwappshmfox32datahiremate.dbc;SourceType=DBC;E xclusive=No;BackgroundFetch=Yes;Collate=Machine;Nu ll=Yes;Deleted=Yes", acTable, "hires"
View 2 Replies
View Related
Dec 13, 2011
Is there anyway to import my excel spreadsheet which contains command buttons with vba code into access?
View 2 Replies
View Related
Dec 17, 2004
Hi
I have a log file that records an action in following format.
50144021 12-17-2004 21:00:44 Mail Sent Subject: Test file TO: bert@xxxxxx.com
I want my database to look into this file and return the date/time of the last send in the log to match up with a record in one of my tables that has following fields: "email","last sent", "subject". ( The match will be done on the email address)
I can therefore look at each record and identify when each email address was last sent the file
Any help would be much appreciated
Thanks
Mat
View 3 Replies
View Related
Sep 5, 2007
Hi all. Another question that i hope ya'll can answer.
I'm trying to take a comma divided text file and import the raw data from there into one Access table to allow for various data manipulations with the end result being a very nice printable report. Unfortunately, I can only get the data in a plain text file, and not a CSV file.
What I'm looking for is a method to where I can import one or many of these text files into a database at one time via a fairly automatic process (pressing a button to load all the text files in a given directory would work), and have the data filtered according to the pre-defined variables in the text file itself (which could just be pre-entered into the database as a template). How would I go about doing this?
p.s. If anyone wants to see an Excel file of a manual data sort to see what i'm talking about, please e-mail me and I'll send it off.
p.p.s. Thanks for any help you can give me
raw text file data (there's more, but this will suffice as an example):
price,volRemaining,typeID,range,orderID,volEntered ,minVolume,bid,issued,duration,stationID,regionID, solarSystemID,jumps,
4500000.0,16.0,25619,32767,512583166,16,1,False,20 07-09-04,7,60006655,10000043,30003562,12,
5010707.0,3.0,25619,32767,511108734,3,1,False,2007 -09-03,30,60006658,10000043,30003563,12,
5523022.0,2.0,25619,32767,512004088,2,1,False,2007 -09-04,14,60008494,10000043,30002187,2,
5010000.0,17.0,25619,5,512177386,19,1,True,2007-09-04,7,60008950,10000043,30002187,2,
View 11 Replies
View Related
Aug 1, 2007
I have a database that I import data from an excel spreadsheet into multiple times daily. The table that this data is imported into has several key fields that if the data already exisits in the table, and I attempt to import data that is the same except for one or more of the key fields is different. At this time the database it creates a different record. I am trying to get the database to overwrite the data in the database.
View 1 Replies
View Related
