I have created a formated field called DateToCallBack, which is the calculated field.
For example when I enter say today's date 03/11/07 in the Date field
and enter 10 as the number of days to call back in, the calculation field
works just fine and gives me the correct call back date which in this example
would be 13/11/07.
The problem I am having is,
I am trying to set a criteria on the calculated field for a
Between [Start Date] And [End Date], but when I run the query it gives me
all the day dates in the range I specified properly, but it gives me that in every month, when I only wanted one specific month.
For example,
I select between 1 Nov 07 and 8 Nov 07
It gives me all the 1st to the 8th of every month, when really I only wanted Nov.
i have a field called commitment fee and it has a calculation of =-IIf([Type of finance]="Term Loan",-([Total amount requested]*0.015),-([Total amount requested]*0.01))
but i want to allow a user to enter a manual amount of money into the field how do i do this.
I'm having to recode some old MS Access DBs so they will run in the following environments:
Office 2000 on WinXP Office 2003 on WinXP Office 2010 on WinXP Office 2000 on Win7 Office 2003 on Win7 Office 2010 on Win7
When I wrote my code for Office 2000 on WinXP things were simple because directory paths were the same across all computers and I could hard code pathing when using a shell command to launch other files.
My new approach is to make a function call to the Windows registry to determine the default executable and path for opening a file based upon its extension (see apicFindExecutable in basWindows API module).
I'm able to use code to create a shell call and debug print it to the immediate window. If I put my cursor in the immediate window at the end of the shell call and hit [enter] the external file will open as desired. If I try to open the external file directly through code, I get a file not found error.
To recreate the error take the following steps:
(1) browse to files that are accessible from your computer (2) click the PREPARE DATA AND OPEN MAIL MERGE DOCUMENTS command button
Shell function call is made by the fnOpenFile function located in the basOpenFile module. There has to be a trick here that I'm missing.
I want to find out the last 6 months date from todays date. So as todays date is 27th january 2015 so the code should give me the date which is 6 months back from todays date so it will be something like 27th July 2014.
i am a basic basic user in access, however i have the chore of creating a database for our products and sales reps. i have created a table and sepated the tables out using the analyze table function. it has now given me several tables. thats all i have done.
what i want to do is this: create a form that my sales reps can use to create a quote request and print it out for the customer. i want each quote to be saved as well, per customer, per date.
the sales rep may only have 1 of the 2 items needed to preform the quote. when he types in 1 of the 2 items, i want the other 10 fields pertaining to that item to come up (the descriptions{many fields for that} and price).
i then want to be able to either print, email, or both this quote to the customer out of the dbase.
what do i need to do this? if there is someone out there that can help me with this, i am willing to pay to help set up this dbase for us.
Is it possible to call a function from a field on a form, ie, in the control source put = FunctionName(abc)? Then I want to concantenate it to another variable so it would look like:
=FunctionName(abc) & TextVariable
I tried this and got the ?Name on the form, like it couldn't find the field name, which is really a function I'm calling.
Is this possible and if so, what am I doing wrong?
I have a Dbase set up and ready to roll, but I haven't actually created the Dbase yet with Access. I would very much like your opinion on my table layout and relationships. You can view the design here (http://www.joyceandstevieb.com/Dbase.htm) I am hoping to track shipments in and out, plus current stocks of items using Queries and Reports etc. I have read a lot on Normalisation and realise that there a lot of fields in the "movement" table, although a number of them are "yes/no" fields to help with the queries. Any advice is most welcome. and as always, your time is much appreciated.
Hi, it's me again. I hope everyone's holiday season is just fantastic!
I need to figure this out and I don't know quite how to explain it. In a form, I have five fields named "Primary Objectives 1" , 2, 3, 4, and 5. Each is numbered consectively. I am trying to figure out how I can add another "Primary Objective" field to the form, if I need it, without adding the field to my parent table. Is this clear? Is it possible??? Thank you!
I'm currently using Allen Browns pop up calander in an access database. http://allenbrowne.com/ser-51.html
The calender allows the user to choose and add a date into a field.
When I run the access project i can see the pop up calander on my form, and use and interact with it to add in a date. However when someone else on the network acceses the project, and they open the form with the calander on it they get an error and are not able to use the calander. Is there something that i need to change to allow multiple users access to use the calander?
Hello everyone. Hope your holidays are going well. I have been given the task of developing a DB that will be used to generate reports for scheduling services for clients. These are medically related services and are provided around the clock. I have divided the Services into two broad categories A&B for ease of discussion and I think it helps in the DB design. The reports will display client information, services, service detail, appointment frequency and times. The reports will be printed in duplicate, with one copy for technician providing service and the other for book keeping purposes. I have it in 5 tables: 1. tblClient Auto#-pk Client ID Client Last name Client First name Client Location
(pretty straight foward, single client, main table)
2. tblServices ServiceA1-5&B1-5
(Table with a complete list of all the services offered. Clients can have up to abut 6 different services at once of several different types. The services aren't really related to one another - for DB purposes...I think :D )
3. tblServicesA Auto#-pk ServiceA1-5 Frequency
(The services provided here are really more of a maintenence type of service which occurs about 4times/day around the clock (known as the frequency). The technician observes the client, if service is being utilized,then the time listed on the report will be crossed out, if the service is not used the time will be circled on the report. Services in the A category are very straight foward. Each service has a frequency at which they are checked (as stated above 4 times/day for Service A), technician checks client, if service used, service is charged. Again, pretty straight foward, but wait till we get to ServiceB. The patient can have up to 3 services from this category on their report)
4. tblFrequency Frequency Times
(This table is for the different frequencies at which all the services are checked +/or performed. Each service in ServiceA category has only one frequency (4 times/day) we'll call fID. In ServiceB category, each service is associated with one (actually two, but we'll get to that later) frequency. In this category, there are about 13 different frequencies to choose from. All frequencies are associated with one set of times. For example: fID is associated with 0600, 1200, 1800 & 0000. Again, these times will be displayed on the reports used by the technicians (the frequency will also be displayed on the report). The frequencies of ServiceB are subject to change. When this happens, the technician makes appropriate changes on current report, then will update the frequency for future reports. Wasn't sure if a PK was necessary here.)
5. tblServiceB Auto# - PK ServiceB1-5 Frequency Medication Dosage
(ServicesB3-5 are similar to ServicesA in that they are only associated with a single frequency that will not change. So on the report the service and frequency will be displayed.
ServiceB1 is not too difficult, but instead of having a timed freq/day, it only occurs on a 72hr basis. What needs to be displayed on the report will be the next due date of the service. I was hoping that the technican could just refer to order summary to select a date that the service will need to be 'observed', and enter this data as text in a field on a form. When the service is observed, it then needs to be observed again another 72 hours later, so the date will need to be changed. The problem is, that there are times when the observation of this service occurs before the 72 hrs is up, and times when it is done later than 72hrs, so I can't have the date automatically updated.
ServiceB2, a little tricky. ServiceB, like all the other services will have a single frequency which when selected will display the times the service needs to be performed on a report for technicians to refer to. It also has a secondary frequency that will also need to be displayed on the report, but only as a free text. There are not specific times that are associated with this secondary frequency, and like the date in ServiceB1, I was hoping it could be entered as text in a field on a form. ServiceB2 is also associated with a medication (in some cases up to 3 medications). Each medication has a single dosage.
I'll end it here, hope the explanation doesn't make it seem any more complex than it really is.
Although I have been doing alot of research in MSA recently, I'm still very much a noob. Thanks for any help.
How do i create in the validation rule of the table, a way of checking that an email address has an @ sign in the middle of it. and the general format etc?
I have two database tables: -table one contains c.100 decimal lat/longs and a temperature. -table two contains lat/longs for the whole Earth (lots!) and a temperature for each coordinate.
I want to query table one against table two and return a report which:
-returns a figure which is an average of the temperature four coordinates .5 of a degree N,S,E+W for each test site. -compares the test site temp and the new averaged temp against each other
I'm told this should be quite straightforward but I can't figure out how to do this. I'd love some guidance.
Thanks!
P.S. I'm not worried about points near the poles being closer than those elsewhere at the moment (unless there is an easy way of dealing with this?)
I'm running Access 2000 through Citrix, 20 users internationally from 1 db. I'm working through Citrix network issues to split db with separate FE's for each user. I have sporadic corruption due to this. But this morning I met a new breed of corruption. I preface this with the fact that I run a bat file nightly to do clean up and compact and repair the db. It verifies the db is not in use prior to running. This morning we were presented with a hosed db. The log file said updates ran fine. In my main table the first record was garbage, including the Auto-num field. I found that my Primary key has lost it's index and references had become unchecked. Correcting these issues got it running but does anyone have any clue what might have triggered this or even where I should start looking? Please help as I am at a loss. Thanks.
I have some basic VBA and ADO recordset exposure, and would like to create a form, that:
- allows a user to search 4-5 fields (client & business name based information) - return options of records to view that match that data - allow user to make a selection, which then provides another form with full details of that client's record(about 20 fields)
Can anyone provide an example or perhaps guidance on a good tutorial, that will take me through this process gently (and help me understand the process)!
I have a query that takes a date from a selection form. Is there a way to window my data by taking this date and going back 12 months to give me a block of data covering this 12 month window.
Example: Date entered is 03/dd/06 Date window desired is 04/01/05 thru 03/14/06
strange query... I have a testing database which I have filled full of test data. I now want to create an empty copy of this database, so I copied this, removed all records, however the tables where I have a field named ID, which is the Primary Key field and is Autonumber set to increment, I cant seem to get this to set back to 1. I tried deleting the ID field completely, closing DB, and adding it again, yet it STILL remembers the next number up from the last record I had created previously??
Can anyone offer any help as to how I can get this set back to 1, as now I am finished testing I want to essentially start all table records fresh.
Is there a way to change the back color of an active field in a form? Meaning, when I tab through my form and the field I tab to becomes active, the field turns white. This poses a problem because my form back color is black and my field text is white. When the field is active, I can't see the value in the field due to the back color defaulting to white. Does this make sense? Is there a way to change it?
So I have a control called txtBranch. If the user does not put 1 of 4 options then a msgbox pops up and says that is an invalid option and then gives all the valid options. It then sets the value to blank. Then it moves to the next field. I do not want it to move to the next field. I want it to stay on txtBRanch till it has a correct value. I have tried DoCmd.GoToControl "txtBranch", Me.txtBranch.SetFocus on the OnExit, OnLostFocus, AfterUpdate events and it still continues to go to the next control how do I get it not to go to the next control?
I am trying to update a memofield from a form.My file.. sign_midi.asp has this partial code.First I pick up the record I want to update. And then present it in a form. " <tr> <td align="right" height=10 valign="top"><b>Beskrivning :</b></td> <td align="left" height=10 valign="top" width=250><TEXTAREA WRAP="soft" name="M1" cols="65" rows="8"><% = rs("text")%>
I have a form with a date field that has a default value of =IIf(IsNull([DueDate]),Date()+14). I use the form for new entries and for modifying entries. So if it already has a value in it then don't put the default in For new records the default is fine until someone changes the date to something else and then enters other info into another field that has a default value.
How can I stop the date field from reverting back to the default value after someone has changed it.
I'm a bit new to Access but have managed to build a very simple database.
I have a main table which I need to add 4 columns onto the end of, the data for which comes from 4 tables linked to it. Below is how they are linked.
Main table------> Table 1 Main table------> Table 2 Main table------> Table 3 Main table------> Table 4
All 4 relationships have a join type of 2 (Include ALL records from 'Main table' and only those records from 'Table1/2/3/4' where the joined fields are equal)
However, 3 of them pull back the correct data when I refresh the Main table, but the 4th one doesn't - which appears to be to be set up in the exact same way. It does bring back data, but it's the wrong data or in the wrong order.
For example, if the related field in the Main table is "Sarah" - It needs to bring back "Programme", but some Sarah's pull through Programme, some are blank and some are another option altogether. Table 4 has no duplicates or typos etc and I've tried deleting it, loading it in again and creating a new relationship but nothing seems to work.
I am building an Access database for a client. It is an employee staffing database. With that being said they would like the ability to automatically populate the "T2PPCD" date field based on what is entered into the "Report Date" field. (Same table)
The date is the Monday after 180 days from the report date.
I already know how to get it to auto fill 180 days from the "Report Date" but I'm not sure how to tell it to give me the Monday after 180 days.
I'm trying to get my "IncidentDate" field to autopopulate two other date fields to a few days from the "IncidentDate". The other two date fields are "ContainDueDate" and "RootDueDate". I'm trying to accomplish this on my "Test CAP Form"
I tried using the following in the BeforeUpdate of "ContainDueDate" and received a complier error: expected =
Code : DateAdd(d,2,[IncidentDate])
so I removed the parenthesis and nothing happened
Code : DateAdd d,2,[IncidentDate]
I even tried redoing it in the AfterUpdate of "IncidentDate" and nothing happened either
Code : DateAdd d,2,[ContainDueDate]
I'm not sure if I'm even using the right function to get what I want.
I've inherited a database into which the user (not me) is entering essentially the same Date data twice: field 1 contains 6/19/2014 and for field 2 they enter June-14 (the month and year from field 1).
I suspect there should be a way to derive and then reformat the display of field 2 based on the contents of field 1, such that the user only has to enter the first. Is this true? If so, how?
(I know there really is no need for the 2nd field, but existing reports and queries are built around it -- so for right now, I'm just trying to eliminate the duplicate data entry)...
