Hiya guys! This time around I need to know how to use a command button to input the date/time into a text field by the event OnClick.
I would have thought by inputting: VisitDate.Value=Date() it would have worked but no such joy.
Sorry if I sound really stupid! ;)
Thanks!
Jay
I have 2 text boxes and 1 push button for each text box for input to table. When I click on 'SaveInput1' only Input1 is save onto the Table and when 'SaveInput2' is click only Input2 is save. I want each command button to save each input separately.
I know ACCESS have a SAVE RECORD function, but I do not want to use this because it will save the entire record all at once.
TextBox1 = Input1
TextBox2 = Input2
Commandbutton1 = SaveInput1
Commandbutton2 = SaveInput2
Good Morning to all:
I have created a form using Access 2000. Within this form are names address, Student ID'S, etc. In addition to this form, there are queries in there as well.
I wish to place a command button on this form so that when pressed, it imports data from another file(Excel). I assume the Excel file field names that I wish to import must match the table in Access 2000.
Is there a way to do this? I am completely lost.
Many, many thanks,
Dion
I know this topic has been discussed, but i could not find one thread on the general purpose of exporting an excel table/form to excel.
I would like to place a command button on my FORM, and let the user click this button and export the data into excel.
I tried using the transferspreadsheet method, but could not corrrectly, if at all get it working, and the help section within access2003 onlu covered importing into access from excel.
Please, if anyone has any links to sites/tutorials/ threads i misssed actually covering this topic/or thier own help, it would be greatly appreciated.
Thanks
Connor
Dear All:
I have created a form where data is entered. I wish to place a command button on the form and when it is pressed, it deletes data in specified textboxes. The texboxes are: LAST_NAME, FIRST_NAME, MIDDLE_NAME.
I assume this is done using vb, but I am clueless.
Any help is most welcome.
Regards,
Dion
I'm looking for someone to help me with a solution to my problem of importing data into a data table.
What I'd like to do is have a command button on a form. When this button is clicked the records in a table are cleared out. Then I'd like for a browse window to come up to locate an Excel file. The user would select this file and the data would be imported into the data table that was just cleared.
Can this be done without too much trouble?
Thanks, Paul
Well the title says it all. I need to create a button to lock the info on the form so it can't be edited and at the same time insert the date. Any ideas?
View 1 Replies View RelatedIs it possible to have a command button on a form that when clicked will turn the data entry property from yes to no?
View 3 Replies View RelatedI'm trying to design a command button on a Form so the user can import the contents of an Excel spreadsheet to an existing Table in Access with the click of a button. But, i'd like the imported data to overwrite the existing data in the Table and not append to it. I've considered using linked tables but apparently you can't set Primary Keys when you do it this way.
View 4 Replies View RelatedCode that will allow me to post selective data from a purchase received form to the inventory using a command button. this command should also add to the existing quantity in the inventory.
View 2 Replies View RelatedHow can I automate different printers for different reports on the same MS Access 2007 database, without having to select the printer each time?
There are two reports that are printed on the same database. Previously, I had automated form buttons to print the reports, without having to select the printer each time. This was about 8 years ago, but I don't remember how I did this. Also, I don't know SQL. Nothing against code, but I did not know how to program, and just MS Access 2007 access itself.
I have a subform in which I want to put in a Command Button to open another form.
I used the wizard as per normal, but when you come to matching specific data fields, there is nothing in my left hand column of the sub form. I have checked the record source property and it is bound to the correct table.
I have read that this is an issue with Access 2007? Is this the case or am I missing something obvious here?
There are 4 unbound dropdown list box that will have a default value of empty string. All 4 must have values entered (data is required).Once all 4 are required - the bottom 5 text box will become enabled (optional data).Forcing the user to click on a Validation Button
Some users type then use the mouse to select the next.Other users type to select then tab.The trick is: After filling in the 4th listbox and validating all 4 have values, the event must trigger code to enable the 5 optional text boxes below.This provides a seamless data entry environment.
I have been doing this in other places, but the transisition after the last required field is complete gets ugly.If Trim(cmbBoxname1 & "") = vbNullString ' check all 4..If it is the 4th one, the event seems not to happen quick enough for the bottom 5 text boxes to be enabled so the user can continue with data entry.
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies View RelatedI have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
Hi, I have got a small problem and maybe someone could advise me.
I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click()
Me!itemquery.Requery
End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.SpecialEffect = 2
Me.Labelsearch.BackColor = 255
Me.Labelsearch.ForeColor = 10092543
Me.Labelsearch.FontItalic = True
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.ForeColor = 255
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
'Come back to initial state when button release'
Me.Labelsearch.SpecialEffect = 1
Me.Labelsearch.BackColor = 16373685
Me.Labelsearch.ForeColor = 8388608
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End
If I create a command button with the wizard and assign the code :
me!itemquery.Requeryto the on_click event my form is working fine.
Why is his code is not working if I assign it to a label? :o
I had looked at the Shell() function but I don't see it doing anything such as input and output.
Does anyone know the use of the VBA's command line that would send an input and receive an output to the VBA's variable?
NO matter what I do I can't get the InputBox to work
Code:
NewEmailAddress = InputBox("There is no Client Email Address on file would you like to enter one?", "Information Required")
It just won't display or stop at the above command.
I have a form within a form and am trying to create a txt box for me to input the information i want from a main form and the search button to display the data in the sub form. I have a combo box which work fine but i don't like it to me its not looking professional.
Any help will be greatly appreciated.
thanks Ed
I have been working on this for awhile, and can't figure it out for the life of me!
I have a form set up with a drop down box that lets me pick from values from a table based off of the Primary Key of that table (Row Source = SELECT Order.OrderID, Order.OrderName from Order). I have a button on the form that I want to set a value (Closed) from the table entry based off of the order selected.
Pseudo code would go something like this.
Closed.Value = True Where Table.Order.OrderID = SelectedOrderID
Table.Order is a Table Named Order (obviously)
Closed is a yes/no field in my Order table
OrderID is the primarykey of the table Order
SelectedOrderID is the drop down box.
Any help would be greatly appreciated!
I, unfortunately, have been singled out as the Access guru in my work area. We have 223 people and the Information Manager has tasked me to modify a database he "found" to be able to track a number of things, but most important to him: performance reports.
I have posted the sample of what I currently have. What is being asked of me is a way in which to have a button or by double-clicking a block where a date would go for all other dates on the form to become non-visible while the current date stored in the computer the database is being worked from be entered in the block where the button or double-click happened. All this links to a report for the IM to be able to track what performace reports are out, and when they are due back to his section. He also wants me to be able to show which are overdue and where they are at. I am not sure if it is at all possible, but with me having spend most of last week purusing the articles on Access here, I know now that nothing is implausible if you happen to go about it the right way.
Since I have read the rules on posting, here is what I have done. I searched the forum for command button and got a lot of really cool ideas to use elsewhere in the database. I looked up the help in the program itself for command button, and got some good information on how a command button works, but I cannot make it put a date into a block. I can enter the date in any block that is a date format, but then I have dates in every block. He only wants to see the most current date in any of the blocks.
Any assistance at this point would be appreciated. If I have missed something in another thread, I apologise in advance.
how can i assign a formula to a command button?
also can anyone give me specific advice about calucalating the % of check boxes ticked across multiple records.
thanks in advance
A couple of weeks ago I asked the question of how to send a single record from one table to another (Archive table) using a command button. I got a response. I have had time to work with this a little. My problem is I keep getting a error message "Run-time error '3075'; Syntax error (missing operator) in Query expression "[New ID]='. I wanted to mention that the archive table has an "archive ID" field as well as "New ID" that links the tables. I have the following code. Please help with this if possible.
" Private Sub Command667_Click()
' Save the main record if it has not been saved.
If Me.Dirty Then
DoCmd.RunCommand acCmdSave
Me.Recalc
End If
If MsgBox("Do you want to archive this record?", vbYesNo) = vbYes Then
Dim SQL As String
' Move main record to Grants Activity Archive.
SQL = "Insert into [Grants Activity Archive]" & _
" select * from [Grants] where [New ID]=" '" & Me.ID & "'"
CurrentDb.Execute SQL
Me.Recalc
End If
End Sub "
The error seems to refer to the & Me.ID section. I have tried putting Me.New ID and also Me.Archive ID. The Grants Activity Archives is the subform where I want the record to go. This subform is set up like a form with many fields so it is a lot of work to type the main record from the Grants table to the Grants Activity Archive table every time you want to archive a record. I hope that makes sense.
Hi all
Can any one correct my attached program to make it works with one command button only please?
Using two buttons make conflict.
Any help will be highly appreciated.
Thank you
vbnt
Hi I can't seem to be able to find any option to open a table from the command button wizard how is this possible. Thanks
View 2 Replies View RelatedHi,
How can I make command button on my DAP to use update query that I wrote? :confused: