Hi all
I have searched through this forum and on google, and I know that I can refer to a combobox's column property IN VBA by
[myform]![mycombobox].column(1)
When I do this in SQL, it complains that there is an "unidentified function" (column). What am I doing wrong?
Hi all..
I use the following code in my application to select a particular column value in a list box..
myvalue = SearchResults_LB.Column(5, i)
In my computer the column count starts with 0. So, the above statement sets the myvalue to the 6th column. But when I install the same application on an other computer it sets myvalue to 5th column.
Looks like I need to set the base value of the listbox column property somewhere!
I hope it is an easy one for many of you.
Thanks in advance.
I've set the column widths properly on the subform, but the down arrow on the list box is still outside of the selection area. It may have something to do with lookups or concatenations, but I'm not finding that so in what I can think of to trace down.
I exaggerated the width of the list box to show where the down arrow actually shows itself.
See the form "frm_Class_Skills_Update" in the attached database. I need it to be visible when the list box is about 1.25" more narrow.
How do I select the first column of a multi-column list box (called "List1") for a query.
A single column list box works fine.
Code:
SELECT Tble_Employee.Emp_No, [forms]![attendee_form]![list1] AS SelectedCourse
FROM Tble_Employee;
I am trying to run a simple update query to copy data from one column (Addrl1)to another column (Working_Addrl1) within the same file and I can't for the life of me figure it out. Then I need to repeat for addrl2 and addrl3 to working_addrl2 and working_addrl3.
View 7 Replies View RelatedHi all,
In the organisation that I work for employees get paid every 2 weeks on a Saturday. So for this financial year the pay period end dates have been 08/07/2006, 22/07/2006, 05/08/2006 etc
I have a column in an Access table listing various dates. I want the next column to be
populated with the next pay period end date after that date.
So if DATE is 05/07/2006 I want PAY PERIOD END to be 08/07/2006
and if DATE is 09/07/2006 I want PAY PERIOD END to be 22/07/2006 etc
How do I do this?
Kind Regards,
Matthew
I have created a cross tab to extract pipeline and sales for Q1 2014, Q2 2014, Q3 2014 & Q4 2014... the user can select the quater from a multivalued text box...
Now for the final output, have created another query which pull the above four quarter in each column from the cross tab...now the problem arises when i change the quarter to Q2 2014, Q3 2014, Q4 2014 & Q1 2014..it gives an error "Microsoft office Access database does not recognizes "Query name" as a valid field name or expression".
The error is because the second layer of query does not identifies Q1 2014.
How do i make access change the column automatically when the Q1 changes to Q2...
I need to input a string into a column named "EventType". The code should first check if the column "Agent Name" contains any strings. If there is none, it will input "IBM Director" into the EventType column.
Once it has looped through the agent names, the code will then loop through the Details column and input into EventTypes based on what is displayed within the string.
These are the codes that I am using to achieve this, however nothing is being input into the EventType column.
Code:
Private Sub Command11_Click()
Dim dbs As DAO.Database
Dim rst As DAO.Recordset
Set dbs = CurrentDb
Set rst = dbs.OpenRecordset("Final")
[Code] ....
I think the problem lies with the code that checks the agent name. When I removed it, it managed to populate the EventType column based on the details. But I still need to find out how to check the agent name too.
i have a columns as 1. contactname, 2. firstname 3. lastname 4. email and in this columns some emails are not matching with the contactname or some time firstname or some time lastname so i need the to find out the un matched contacts from the database.
View 1 Replies View Relatedhi,
im wanting to reference a value of a dropdown which is already serving a function - the dopdown already has it's bound set to 3 but i want this new function to refercne the second column-
im tyring:
"Tutor = '" & Me.ComboStaff.Value(2) & "'"
which isn't working- how do i reference the second column of a dropdown if its bound to its third?
cheers
dubs
Hi. I have a question I'm hoping someone can help me with. I would like to take data from multiple columns and put the data into one column. Additionally, I do not want to exclude any data (union all) and I would like to group the resulting union by another field. For example:
Original data layout:
Column Headings: Sample Event, Depth 1, Depth 2, Depth 3,
1st Row Data: 1, 6, 9, 12, 9
2nd Row Data: 2, 7, 9, 8, 3
Desired data layout:
Column Headings: Sample Event, Depths
1, 6
1, 9
1,12
1, 9
2, 7
2, 9
2, 8
2, 3
So far I'm using the following SQL. What do I need to add or change to get my desired result of grouping the unioned depths by the 'sample event' field?
I appreciate any help anyone may have to offer. Thank you.
SELECT Depth1 AS Depths
FROM Depth_Velocity_Substrate_Correct
Union all
SELECT Depth2
FROM Depth_Velocity_Substrate_Correct
Union all
SELECT Depth3
FROM Depth_Velocity_Substrate_Correct
Union all
SELECT Depth4
FROM Depth_Velocity_Substrate_Correct
Union all
SELECT Depth5
FROM Depth_Velocity_Substrate_Correct
I want to convert a number column into a text column.
Number Column is called Customer.
Below I can't match to the other table containing the text column Customer No.
How can I convert columns in vba?
Code:
strSQL = "SELECT CALCULATED_Forecast_TNS.*, USEFUL.TRP_in_EUR " & _
" FROM USEFUL INNER JOIN CALCULATED_Forecast_TNS ON (CALCULATED_Forecast_TNS.[Reference No] = USEFUL.[Reference No]) AND (USEFUL.[Customer] = CALCULATED_Forecast_TNS.[Customer NO])"
Set qdf = CurrentDb.CreateQueryDef("REPLACABLES", strSQL)
DoCmd.RunSQL "UPDATE REPLACABLES SET CALCULATED_Forecast_TNS.TRP_in_EUR = USEFUL.TRP_in_EUR"
I am looking to add a column in a query that will give a Y or No to previous column data if it contains TEXT or NUMBER (It could read "TEXT" or "NUMBER" or even Y for text or N for number).
View 3 Replies View RelatedIn my table for duplicate "line no" I have different "contractor" like below.
LINE NO CONTRACTOR
L-0001 C-1000
L-0001 C-2000
L-0003 C-6000
L-0003 C-8000
L-0003 C-9000
L-0004 C-5000
Now I would like to make a query for transposing values like below:
LINE NO CONTRACTOR1 CONTRACTOR2 CONTRACTOR3
L-0001 C-1000 C-2000
L-0003 C-6000 C-8000 C-9000
L-0004 C-5000
how I have to make this query?
I have this table ("people") and an example of possible rows:
id(key) COL 1 COL2 department country name
1 xx yy KPP USA John
2 zz kk KPP USA John
3 ss ff TLL USA John
4 ww qq PPO Italy Marco
5 jj uu PPO Italy Marco
I have to count the number of distinct DEPARTMENT for each NAME; so, for John should be 2 (KPP and TLL) and for Marco 1 (PPO).
I have tryed in this way:
SELECT
COUNT(DISTINCT department) AS NumberOfDifferentDepartments
FROM people
GROUP BY name;
But Access says me there is a syntax error.
I'm working with MS Access 2002.
I have a Access 2003 file and I want to filter anywhere where there last name is "expired" and change the column first name to say "no". How do I do that?
View 1 Replies View RelatedPlease would you be able to advise me how I would copy data from a column in one table to a column another table.
But I need to only use table not a query.
Thank you in advance for your help.
Hi,
I need a query that could split data into 2 different field.
The table pic is attached for your ready reference. I tird with Left & Right funtions with no results.
Any one can help me please.
Table name is Agcad and field on which I need to split is Board_Size. The problem is Board_Size data is sometime in 3 digit (first half part) and sometime second half part is in 4 digit. It is a text data type field.
Thanks in advance...
Ashfaque
DoCmd.RunSQL (" update tbl_userinformation SET [05-Henrichpiramid] = Yes where Username= Text146.value AND actualdate=Text148.value ;")
DoCmd.RunSQL (" update tbl_userinformation SET [combination] = [05-Henrichpiramid] where Username= Text146.value AND actualdate=Text148.value ;")
i want to update the column combination to its last value with concatanation to the value of current column.
I have a table that contains:
item | quantity
123 | 1
456 | 10
789 | 4
I need to get this data listed into a table that just has item and for it to look like this:
123
456
456
456
456
456
456
456
456
456
456
789
789
789
789
I understand and have accounted for the obvious primary key issue.how to get the data to display out like this.
I have a problem. The problem is that I have a form contains two list boxes controls and a calender control. The calender control is invisible by default.
When I click a Show button, to show the calender contol, it appears but behind the list boxes controls. How can I allow it to fully appear on top of all the controls in the form.
Thanks,
I have never used the tag property but while reviewing some design stuff it occurred to me that maybe I am overlooking it's usefulness and was wondering how some of you may have used it...?
View 8 Replies View RelatedI have two separate columns in my query but they contain the same kind of data. These two columns data should match but some of the data doesn't. Can I write a criteria that will show me only the rows that do not match.
DUTYPOSC
11B111B1
11B111B1
11C111B1
11B111B1
92Y111B1
11B111B1
13F121B1
For example, I want the query to show me only the rows in which the data in the Duty column doesn't match the POSC column.
Please pardon my ignorance, but how do I set up a ActiveX calendar in Access? The help files are missing from the version of Access 2000 I am using, and I really don't know what I am doing. I would be grateful for any help with this.
Thanks.
hello,
I have a txtBox. Its backColor property changes according to what I do on the form. Now, when I close the form and reopen it, the backColor is not the same one with which the form was closed.
Ex. red, green
if I close the form having the backColor = green, then when I reopen it, it changes to red.
Can anyone tell me what I am missing
Thank you
How do I set the Required property for field that already exists via SQL. I'm thinking along the lines of: ALTER TABLE table1 ALTER COLUMN field1 text(50) NOT REQUIRED.
But this doesn't work, any clues?