Using Several Forms To Fill In One Record On A Table?
May 10, 2013
I would like to use several forms to build one record in a table.
Form 1 with ask for details about one aspect of the client such as personal details.
I will then need a next button and it will go to form 2, summarising what has been inputted and now asking for the next lot of details such as their requirements.
I am guessing I could have 2 separate tables for the details and link the 2 but I have inputted lots of data already and I want to use that table as the source.
The main bit I am concerned about is when I go to form 2, how will it know to relate to the client I put in form 1?
View Replies
ADVERTISEMENT
May 10, 2013
Form 1 with ask for details about one aspect of the client such as personal details.
I will then need a next button and it will go to form 2, summarizing what has been inputted and now asking for the next lot of details such as their requirements.
I am guessing I could have 2 separate tables for the details and link the 2 but I have inputted lots of data already and I want to use that table as the source.
The main bit I am concerned about is when I go to form 2, how will it know to relate to the client I put in form 1?
View 1 Replies
View Related
Jun 27, 2013
How move to next record (without enter) after fill mask in first record in access form?
View 4 Replies
View Related
Feb 14, 2014
I have been searching all day for a solution. This is my first time using Access so a lot of this goes over my head. I'm currently running Access2010. I have a form that I am using for when people take office supplies and we can generate a cost per department. All of the Tables, Query and Reports are set up already and surprising work. My form fields are:
Date Created (automatic current date)
Quantity
Item Code (Combo Box that shows Item# and Item Description)
Initials
Department (Combo Box that shows Dept# and Dept Description)
RefCode
Remarks
I am trying to get it to where when I enter a new record it will autofill with all fields expect "Item Code" from the previous record until I change it.
View 3 Replies
View Related
Apr 12, 2013
I have a Contacts subform and would like to be able to double click to fill addresses, and details from the previous row...every person in our database even those living at the same address needs thier own record.. and since we only need to fill up to 5 records and review them, double clicking on the first name to fill up the next row with the previous addres phone number ect would be grand.
I am assuming we could fill out the new Full Name and double click on it to get the previous record filled to the new one. Don't really want to work with a query unless needed, but I have a little vba understanding.. how do I code this to make it work?
Full_Name_Dbl_Click
getPreviousRecord.Address(-1)
getPreviousRecord.Phone Number(-1)
getPreviousRecord.City(-1)
View 5 Replies
View Related
Apr 29, 2015
How to fill values in a new record with data from previous record?
I've total 11 columns in a table and values in 3 4 columns are repeating for few rows before it needs to be changed eventually. I want to fill these rows with values from previous record.
View 10 Replies
View Related
Jan 29, 2014
I have a totalquery that runs fine and give me the sum for both fields I'm looking for but I can't get the outputs to fill the fields on the form. I have tried the Dcount query in the control source but that just returns an error and locks up access.
Code:
SELECT [Tble-wcDelays].Causedby, Sum([Tble-wcDelays].HoursDelay) AS SumOfHoursDelay
FROM [Tble-wcDelays]
GROUP BY [Tble-wcDelays].Causedby, [Tble-wcDelays].LinkingID
HAVING ((([Tble-wcDelays].LinkingID)=[Forms]![Frm-ePlusCent]![cleanID]));
That is the query.
View 14 Replies
View Related
Feb 25, 2005
Hello,
I have a record set I open with SQL, and I have lots of fields that are assigned control source names (which are columns in my table)
When I open the record set from a table, science the control source names agree is there a way I can fill all those out instead of going:
Me!fieldOne = myrecordset("fieldOne")
Me!fieldTwo = myrecordset("fieldTwo")
etc etc
That is very tedious and very hard to update the code. Is there a way?
View 4 Replies
View Related
Dec 31, 2006
Hi All,
I have little problem, Please solve for me. Thanks
I have form contain with the subform (Datasheet). I want to fill subform from another form "that form have list Box" when I dubileClick on the record in the list box, the record move and add in the subform. till here ever thing is fine. But it does not go to newrecord "(not move to the next new row)" that I want to fill again from that form's listbox. I used "Docmd. gotorecord, , acnew. but did not work
Please try to get me out this problem. thanks
:)
View 1 Replies
View Related
Mar 30, 2006
I've created a table.
Id= autonumber
tDate=date
Now I need something to fill this table with 365 records where tDate starts at 1-jan-2006 and ends at...you've got it!
I've got a Query that will add a date but I don't want to edit this 365 times.
Probably very stupid simple but please help
View 2 Replies
View Related
Aug 22, 2013
I have a form that using "Query A" as data source. The Form need add (edit) a field value before save that Query Result to another Tabel. Is it possible to do that?
The PROCESS simply like below: Tabel A --> Query A --> Form -->Edit value a field -->Save to Tabel B
if it is possible, are there some requirements that have to be fullfilled?
View 2 Replies
View Related
Feb 22, 2015
I have created three tables, all of them are connected by one-to-one relationship by same field, as you can see in the screenshot. and at the same time I have created three forms for each table. then I brought two forms in one remaining form. so whenever I entered data in first form and click on the next tab in which another form exist, it gives me this error: "you cannot add or change a record because a related record is in table".
View 2 Replies
View Related
Dec 18, 2012
I would like to have a date control on a form filled in automatically with the current date when a new record is created (the date would remain as is unless changed manually). I've tried programming it in VB but, being a newbie, have not been able to come up with anything that works. I'm not even sure how to trigger an event to do it just the one time when the record is created.
View 2 Replies
View Related
Jul 5, 2013
I am working on a database where the records are numbered sequentially. On a regularly basis, records will be deleted leaving a gap in the record number sequence. I would like to have my db recognize that a number(s) is number in the sequence and use the missing number (filling in the gaps) when a new record(s) is added until all spaces are filling and then to continue from the largest number sequentially.
View 2 Replies
View Related
Dec 4, 2012
I have a subform that is embedded in a main form. The database itself is a few years old and so I think redesigning is out of the question. What I am wondering is if there is any specific code that can go into the tables themselves and populate the form based on the previous record. I would like for the Transfer to Rehabber fields (To and Permittee) to be duplicated on the Transfer From Rehabber fields (From and Permittee) on the next record. Do you think that there is code that will be able to achieve such a thing?
View 12 Replies
View Related
Mar 14, 2008
I have a table which contains these fields
MAIN TABLE
Job_No - Looks up Job table
Source - I want this to be automatically filled from the record associated with the job number from the Job table
Test_Result - Looks up Result table PASS/FAIL etc
Technican - Looks up technican names table
JOB/SOURCE TABLE
Job_No 0001 0002 0003 0004 etc
Source Cust1 Cust2 Cust3 Cust1 etc
Note also that we also have different job numbers for the same customer
I know I can fill in a value on a form from a combo box looking up another table but dont know how to do this in the main table
Any ideas?
Paul
View 7 Replies
View Related
Jan 30, 2014
I have a table being filled everyday that contains the following:
ID
EntryDate
Ward_ID (linked to the Wards table)
Census
At present, the data encoder manually chooses the ward via drop-down list to identify the ward, and fill the census field. Since we have 20 wards, we find this exercise eating our precious time (since we have tons more of data to enter aside from the census). I'm wondering if there's a way to automatically list all the wards in the table in a specific date, so that the encoder would just proceed in filling the census per ward.
One idea thrown was to design the table like an excel sheet (each ward has its own column). Another idea was to make individual tables per ward and make a default value for the ward_id. However I think these two are not the right directions.
View 10 Replies
View Related
Apr 7, 2008
Hello,
I have a very complex issue.
First of all there is a table called "tblParTeam" wich contain the teamname and ID of teams partissepating in a certain Tournament. The tournemant data is kept in the table tblTournament.
Each tournament contains a couple of variables: "Number of teams per tournament", "Number of Rounds" wich reside in the tblTournament.
Here is the thing. I also have a form based on the tblTournament. Each tournament had a number of partisipating teams (stored in the variable "Number of teams per tournament"). Then I have a table called tblTournamentDetail wich containt the Tournament_ID, TeamPro_ID (looks in the table "tblParTeam"), TeamContra (also looks in "tblParTeam").
When I pusch a button on my form, wich is based on the tblTournament, tblParTeams and tblTournamentDetail, I would like the X (Number) of particepating teams to be filled in randomly in the tblTournamentDetail.
Lets say I have 10 teams I want 5 to be filled in randomly in the TeamPro_ID and 5 in the TeamContra_ID.
How do I go about this?
Thanks in advance.
View 12 Replies
View Related
Nov 3, 2004
Ok Ive looked and looked and read a multitude of threads to no avail. Please help me on this one.
I have imported a table into Access, I had no control over the original format of the table so Im stuck with the data as it is in that original doc.
So as it sits now in access..
index mnem client name
--------------------------------
1 310055 blah foo
2 blah2 john
3 blah4 joe
4 310099 grr12 bob
5 blah2 john
etc. * about 50,000 literally in size.
Looking at the empty cells in the 'number' column I need each of those to be filled. to end up with:
index mnem upin name
-------------------------------
1 310055 blah foo
2 310055 blah2 john
3 310055 blah4 joe
4 310099 grr12 bob
5 310099 blah2 john
I did this once in VB/excel but it was prohibitively slow. Im positive there is a better SQL/Access solution but just cant quite get it. My best effort to date is:
DLookUp("[mnem]","upin","[index]=" & [index]-1)
criteria mnem Is Null
In an update query updating mnem.
Downside all I get is say there is a block of 4 empty spaces in a row before the next mnem comes along, only 1 cell will be filled per run of the query.
i.e.
index mnem upin name
-------------------------------
1 310055 blah foo
2 310055 blah2 john
3 blah4 joe
4 310099 grr12 bob
5 310099 blah2 john
I figure #3 is somehow looking up at #2 before its updated and taking that empty value. ..just cant figure a way around it though.
I know this has been done before but no matter how much googling and forum diving Ive done I havent found something to specifically address this.
Thanks in advance for your help
View 7 Replies
View Related
Jun 14, 2005
ok, here goes...
sorry if this is really simple, i just can't figure out how to explain exactly what i'm trying to do...
first of all, i have a list box populated by a table, when i click my button, i want to create a record in the table (done). then i want to display the id for that record in a text box. this will allow me to update the record, which i have also worked out. i just can't seem to figure out how to display the id from the table.
Thanks for your help
*j
View 4 Replies
View Related
Mar 23, 2013
How to auto fill value from table3 to table1 and 2 ? for exmple, ShareID and Contract#, move from table3 to table1 and 2.
Table1
ShareID
ShareName
Table2
ShareID
Contract#
Table3
Date
2/2/2013
Contract#
123
ShareID
AAPL
ShareName
Apple
Cost
Quantity
View 3 Replies
View Related
Mar 21, 2007
Hello,
First post!
I'm looking for help with auto-fill (more specifically, I believe I need to use the "After Update" function.
What I have is an order form where I will be putting customer orders. I have a form and a subform, and the line items for the actual order go in the subform. Therefore the subform has a combo box for "products" which references the "products" table by fetching "productname" through "productID"
What I need to happen is when I select a specific product in that combo box (which works), I would like the "price" to be auto-filled into the "Price" box I have to the right of "product" and "quantity"
However I can't figure this out for the life of me, and I've searched places and tried different things, but I always end up with it not working. I can do this in Visual Studio with a DDL and a Label and a small function, but Access is way different from what I can tell with my little knowledge.
Any help would be appreciated!!
Thanks!
View 2 Replies
View Related
Jan 20, 2005
I have a VB6 form that I want to fill with data from a field in an Access DB. I get the connection and the first field, but want the whole column to show up as the combo box items so that one can be selected, then when saved, populate and/or update another Access table. Can anyone help me cause the whole column to display instead of only the first record? TIA--Ed
View 1 Replies
View Related
Mar 6, 2006
Please help
I have 2 tables:-
1 Master Input Table.
1 Job Lookup table - (contains Job Number and Name)
When in-putting job details into the Master Input table i would like to enter the job number only and have the job name appear automatically without running a query, much the same as a 'vLookup' command in excel.
Is this possible?
Can anyone help?
View 3 Replies
View Related
Jan 9, 2008
Its been a long time since I did dB work - stopped back in the days of dBase IV.
Still, using Access 2007 is not that difficult - except right now. I have 2 tables; one with customer contacts, the other with project details. Heres what I want - hopefully someone can help:
Within the project table, select from a lookup into customer contacts a name, which then auto fills in the fields for phone and email in the project table. I want to do this in the table or form, but have the data deposited into the table for sure!
Any help really appreciated.
View 2 Replies
View Related
Jan 21, 2011
I am working on Access 2007.
I have two separate tables (called inventory and job log) and they have a few of the same field items (number, name, style 1, style 2, and area).
I would like the job log table to autofill the name, style 1, style 2, and area when you type in the number when logging a new job (pulling this information from the inventory table)..
View 3 Replies
View Related
