I am trying to setup a query that will return only the records in a date range that is user specified. In the Criteria of the date field I entered this
Between [Forms]![Report Switchboard]![txtStartTrend] And [Forms]![Report Switchboard]![txtEndTrend]
But the query does not work. Is the syntax correct? Both txtStartTrend and txtEndTrend are format Short Date.
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts 2. CompanyName (combo box) from tblListOfAircraftsOperators 3. TeailNumber (text box) from tblAircraftOperators 4. AirportNameSearch (combo box) from tblAirports 5. PassengersNumber (text box) from tblAircraftOperators 6. ManufactureYear (text box) from tblAircraftOperators 7. SourceSearch (combo box) from tblInfoSource 8. CountrySearch (combo box) from tblCountry 9. CategorySearch (combo box) from tblAircraftCategory 10. EamilToOperator (text box) from tblAircraftOperators 11. InteriorPhoto (Bound object frame) from tblAircraftOperators 12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I have a form with a List Box (List BoxA) that returns a value from a query. I then have a Text Box (Text BoxB) that uses the value from List BoxB and multiplies it by let's say 2. It works giving me the correct value but only becomes visible after I click inside List BoxA. How can I make it visible as soon as the form is opened? I tried refreshing the form data, didn't work and I tried a requery macro which didn't work either.
Hi, I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks. By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
Hi guys, I have a related databes with about 20 tables.
My main table stores the data linking with most of the other tables. This main table stores football match records with player line ups. Initially I had a problem linking the 11 player fields in the main table to the player table, Icould only do it with 1, so someone at work suggested to link it using the lookup function. This worked brilliantly. However, now I am designing a GUI with forms but the forms have combo boxes where the lookup function was used and when i change these to text boxes, the players names are replaced with their ID numbers.
Is there any way of creating the form without the unsightly combo boxes, as they won't be needed, the GUI will be read-only. I look forward to your help!!
I have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
I have a table that has client names and addresses. I have designed a form to be able to invoice these clients and everything is fine however what I'd like to do is have the address of the client appear automatically.
I have set the client names in a combo box and would like their address to appear in either a text box or sunken label automatically from the table. Is this possible and how do I do it.
Please keep in mind that I've done basic programming so please be kind to this newbie :D
I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
I have a form on which there is a series of text box controls relating to different frequencies. At the moment I enter a value in to each of these manually.
However, I would like to have an unbound text box where I can paste in all the values (6 or 8 of them) from excel and then press a button and they would be copied in to the individual boxes.
So far I have my design:
I'm not sure where to start with regard to the code as I don't know how to handle delimited text - is it column delimited in excel?
I imagine some sort of loop, such as a do until will be required but again not sure.
Is it possible to use find and replace to modify text in report design - or else is there something else I can do to get the same effect? I have a really useful report and I want to modify it for use with a different dataset. To do that I will need to change the text in over 150 text boxes. I have seven different fields which each occur over 20 times in the control source formulas in the text boxes, because they are used in different ways in different calculations. If this was excel I could do a simple find and replace to change e.g. every reference to fieldname OLD to fieldname NEW, but I cannot see how to do that within access report so am haveing to click on each text box in turn, go to properties and edit the text box .
I am trying to switch to a more general naming system in the modified report so then I will be able to assign data with the required fieldnames for the report within a query. But the report I am starting with has field names based on years 2013, 2014, 2015 etc.I want a quick way to change each reference to those field names to my more generic new field names.
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click() DoCmd.FindRecord Me.BarTxt.Value, , True, , True CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer" End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
im writing this really long query in vb so it needs to go on two lines, but whats the syntax for going on the next line(theres a quote or something but i cant remember for carrying on from one line to the next)
Hello again all... Today's problem is as follows.... I have an "after update" combo box that is coded as "CurrentDb.Execute "uno", dbFailOnError". I have an SQL Query named "uno" that is showing the following: "UPDATE [Input] SET [Input].Loc_Lng = [Loc-1L].Combo8, [Input].Loc_ID = "1", [Input].Loc_Desc = "xxxx";" I am trying to have the combo box update the values from the combo box into a blank table. When I try to run this, it comes up with the error: "Too few parameters. Expected 1". Any idea what that means, and then how to fix?
I have a select statement that returns information into a sting Then I try to insert this value into a table but I am not sure of the correct syntax. The SQL select statement works but not the insert into...
I was wondering if anyone knows how to insert more than one record at a time with a SQL statment? I have a form that asks the person how many records they would like to put into the system, this is a text box that they can enter a number.
My SQL for input one record is this: [CODE]
SQL = "INSERT INTO tblTemp ([Name],[Number]) VALUES (TName,Len)"
DoCmd.RunSQL SQL
If the person wants to put in more than one I want the system to take the Number field and add 1 to it for ever record the person asks to be put into the system. the Name and Number fields will be that same except the Number field will increase by 1 for however many they choose to put in.
hello all, i have a pretty simple problem related to ACCESS query. I have two tables having similiar columns ( i had to do this to compare the values given to me, because both the table data came from different sources)
The tables named are OFFICERS token full_name division EMPLOYEE token full_name division
Now the table EMPLOYEE contains more than 5000 records and the table OFFICERS contains around 2400 records which are already present in the EMPLOYEE table.
Now I want to build a query that will return me all the records in the EMPLOYEE table that are not present in the OFFICERS table. The criteria for comparing 'full_name'. so the query should return me 2600 records that are not present in the OFFICERS TABLE.
I tried doing this Code:" SELECT DISTINCT EMPLOYEE.full_name,EMPLOYEE.token FROM EMPLOYEE,OFFICERS WHERE EMPLOYEE.full_name<> OFFICERS.full_name"
But this query returns me records that is not present in the OFFICERS table as well as some more 1000 records which are present in both tables.
problem with this insert statment in vba Hi guys i got vba code that suppose to write table name ,column name , rquired ,feild type and feild size to an external db. The first part of this code write tables naem to external db and it is working well. I get the following error when i press the button on my form :
Code:Run-time error '424':Object required
and when i click on debut it points to this part with yellow collor.
Code: metadb.Execute " Insert Into SysColumns(tablename,columnname,required,type,leng ht) " & _ " Values ('" & TableDef.Name & "','" & Feild.Name & "'," & Feild.Required & ",'" & FieldType(Feild.Type) & "'," & Feild.Size & ")" I be happy if some one help me fix this erro.Thanks
my complete code
Code:Sub InsertSystemCatalogPopulation(db As Database, metadb As Database)'''now locating all the non system tables in current db and then writing it'''to systables tableFor Each tbl In db.TableDefs''' excluding the system tables If Left(tbl.Name, 4) <> "MSys" Then ''' writing the tables name to systables metadb.Execute " Insert Into SysTables(TableName) Values ('" & tbl.Name & "')" End If Next tbl MsgBox (" All tables names coped to systables system cataloge ") '''############################################### #################################### ''' now we go find all non syste feilds in the current db and then writing ity ''' to syscolumns For Each TableDef In CurrentDb.TableDefs'''this if statment remove the system feilds If Left(TableDef.Name, 4) <> "Msys" Then For Each Field In TableDef.Fields metadb.Execute " Insert Into SysColumns(tablename,columnname,required,type,leng ht) " & _ " Values ('" & TableDef.Name & "','" & Feild.Name & "'," & Feild.Required & ",'" & FieldType(Feild.Type) & "'," & Feild.Size & ")" Next Field End IfNext TableDefEnd SubFunction FieldType(intType As Integer) As String Select Case intType Case dbBoolean FieldType = "dbBoolean" Case dbByte FieldType = "dbByte" Case dbInteger FieldType = "dbInteger" Case dbLong FieldType = "dbLong" Case dbCurrency FieldType = "dbCurrency" Case dbSingle FieldType = "dbSingle" Case dbDouble FieldType = "dbDouble" Case dbDate FieldType = "dbDate" Case dbText FieldType = "dbText" Case dbLongBinary FieldType = "dbLongBinary" Case dbMemo FieldType = "dbMemo" Case dbGUID FieldType = "dbGUID" End SelectEnd Function