Hi
I am trying to work with a large table of customer data.
I know that there is a large number of invalid values.
I would like to run a make table query that would check the phone number against a table of known invalid numbers (e.g. 1234567, 11111111, 99999999, etc).
If the number exists on the invalid table, then I would like to replace it with a null value.
Regards
Noel
Hi
I am trying to run some queries on a large customer file that has very poor data - particularly in the contact number fields.
If there are more than six "1"s, "9"s, or "0"s in the number, then we are planning to treat it as an invalid number and replace it with a null.
Any ideas about how to do this?
Noel
I set my phone number to be formatted like (920)123-4567
I copied data from an excel spread sheet - now the phone numbers are like 920-123-4567.
Is there a way that I can update the phone numbers to be the correct formatting (920) 123-4567?
I have three fields in a database with phone numbers. They all appear to be set up the same. They all display the phone number format (xxx) xxx-xxxx when data is entered. One of them looks like a phone number in tables, forms and queries. The other two display as a 10 digit number.
View 2 Replies View RelatedI have an excel spreadsheet linked to a table n Access. I have phone numbers that I would like to transfer. I set a format in Excel that made it automatically change to the (###) ###-####, but when I look on the table in Access it shows up ###-#######.
View 2 Replies View RelatedI imported an Office 2010 excel file into Access 2010. All the headers match.
All the data transfered, but the phone numbers.
In Design View, the phone numbers are listed as numbers, not text.
Then I tried to copy the two columns from Excel and past into the two columns in the database. No go. It did create a new table called Paste Errors.
How do I move that into the Table that I first created?
I need to know how to get the phone numbers in their because I need to import several other excel files into this table.
hi Iam new to this can anyone help i want to be able to enter phone numbers the code that ive found only seems to allow me to enter first 3 numbers were actually the areA code has 4 can any one give me correct formula
View 5 Replies View RelatedWhat is the best way to setup a phone number field that will contain numbers from North America and Europe?
Is it just one field that is text and no input mask? :)
Any suggestions?
Thanks
Greetings... I am setting up a text box to accept a phone number with an input mask of 000-000-0000;0;_ but it isnt doing quite what I want it to do, I would like it to start at the begining when clicked to prevent the error of a user typing in the number a space too far to the right. (right now it places the cursor where ever the user clicks, which becomes a major pain when you want to just be able to click the field anywhere and type from left to right for sake of speed)
thanks for any solutions you might have to offer
Here is my setup:
In Acess 97 I have a single data base with 5 tables, Attorneys, Employers, Health Care Professionals and two others. All tables have exactly the same fields.
I am trying to create a “phone book” made up of all the records in the data base. The form for this phone book has only a few fields such as fname, lname, phone, address. It also has the autonumber field. The record source for the form is a Union Query. When I open the form it works well. I get lawyers, employers, doctors , etc. all in alphabetical order.
Here is my problem:
I have a command button labeled “View Record.” I want to be able to click on this and have it find the record in its original table and open the form for that table so the record can be modified (on exiting the record I have it requery so the phone book is updated).
I can only get this to work with one table at a time, that is, the table that is named in the event procedure code. So if I am in, say, an Attorney record and tblAttoney is named in the event procedure code, all works well. But if I am in, say, an Employer record I get a blank Attorney form opened.
How can I get it to trace the autonumber to the proper table and open the record . I assume that the autonumbers are unique ACROSS all five tables since they are in the same database.
Any help would be greatly appreciated.
I have a list of about 900 phone numbers, which have been formatted in excel to have a 0 at the beginning of the phone number. However when i export the data to access, so it can be viewed on a webpage this formatting is lost.
How best can i go about adding a zero at the beggining of all of the phone numbers in my list? Can it be done using sql or is there another function in access that can do this.
Thanks
Ok I have an excel spreadsheet with over 6000 phone numbers that I need to import into a table. I have set up my field with an input mask to display a phone number as (xxx) xxx-xxxx. I have also set up my excel spreadsheet to have the numbers set up like 1234567890 to make it easy to throw in and let the input mask take over. My question is: I have some numbers that have an extension and are set up as 1234567890 x 102. I can take out the "x" and have all of the numbers run together, but what is the input mask syntax to have it display as say "(xxx) xxx-xxxx ext.xxx"?
Thanks:o
I need to query a table for phone numbers that do not meet the following format: ###-###-####
Any idea on how I can do that??
Hope someone can help!
I'm having multiple problems with my database like things such as -
i'm currently working on the Query 2 - On the Phone database (ignore Query 1) and i want to search for multiple plot numbers preferably in one parameter prompt with a comma to seperate numbers. (this could be a multitude of numbers so i would like to be able to input as many as needed). Also when i do search on this query since the Criteria is a 'Between' Value i would expect everything between the 2 numbers input to show up - but a lot of numbers out of the range show up too - why is this? (The Numbers are like "69 to 136" and they will show up - but 1-69 and 136-170 would too
I would also like to implement the search results from Query 2 into the Form i currently have made but it just opens up a access table when the search is made?
i cannot link my database as it is too big for the server - But here are the Criteria for Query 2:
Plot No - (criteria = Between [Enter First Plot No:] And [Enter Last Plot No:])
Site - (criteria = Like "*" & [Enter Site:] & "*")
Product - (criteria = Like "*" & [Enter Product:] & "*"
The Query is the one im most concerned about , i can live without a form.
I have a form that creates quotes for my company by inputting inventory items in a continuous subform. I need to be able to check and see if the item already exists in the inventory or if it is a new one that has been manually entered, and have this toggle a bound yes/no field that I will use to control whether or not some fields on the form are locked. Here is the code I have been using, but it doesn't seem to work at all.
Private Sub Combo14_AfterUpdate()
Dim itemcheck As Integer
itemcheck = DCount("[Item]", "tbItems", "[Item] = " & Chr(34) & Me![Item] & Chr(34))
If itemcheck = "0" Then
Me![Locked] = False
Else
Me![Locked] = True
End If
End Sub
I would appreciate anyone's feedback on this.
I have the following VBA code to search for a string
Code:
'Search by Phone
Private Sub CmdSearchPhones_Click()
Me.Refresh
strSQL = "SELECT Tbl_Contacts.ContactID, Tbl_Contacts.FName, Tbl_Contacts.LName, Tbl_Contacts.Address, Tbl_Contacts.City, Tbl_Contacts.State, Tbl_Contacts.Zip, Tbl_Contacts.HomePhone, Tbl_Contacts.WorkPhone,
[Code] .....
My issue is that this works 50/50, because phone numbers on the database are NOW being stored in this format (000) 000-0000 and previous DB phone numbers got stored as 0000000000. The above code finds previous DB phone numbers (even if we dont enter all 10 digits) without a problem but has issues with new phone numbers stored in the new format UNLESS I specify the search with (000) 000-0000 (but we want to be able to search without adding that and without typing all 10 digits - in case we forget part of the number we are looking for)
How can I tell my query to find both formats, with the (000) 000-0000 AND 0000000000 ....
All I really need some help.
I have two tables:
Table 1
Table 2
There is a one to many relationship here.
One in table 1 and many in table 2.
When I add in a record in table 1, I need a validation script/key that won't allow adding a record to table 1 without a corresponding record in table two.
Please help. I'm really stuck. I am doing this through a form. I tried messing around with the "requirements" but had no luck.
I need to validate a surname field which obviously can only consist of letters and occasionally spaces and/or hyphens. (i.e. van Driel or Johnson-Crooks)I managed to create a validation rule which would allow me to have space in the surname field:Is Null Or Not Like "*[!((a-z) or ( ))]*"but when I tried to allow hyphens into the field - I used these codes - but none of them worked:Is Null Or Not Like "*[!((a-z) or ( ) or (-))]*"Is Null Or Not Like "*[!(a-z)]*" Or Not Like (" ") Or Not Like ("-")Is Null Or Not Like "*[!(a-z)]*" Or Not Like "*[!( )]*" Or Not Like "*[!(-)]*"Is Null Or Not Like "*[!(a-z)]*" Or Like "*[!( )]*" Or Like "*[!(-)]*"Is Null Or Not Like "*[!(a-z)]*" Or Not Like "*[( )]*" Or Not Like "*[(-)]*"Is Null or Not Like "*[!(a-z)]*" or (in ("-"," "))Is Null Or Not Like "*[!(a-z)]*" And (Not In ("*[0-9]*"))Is Null Or Not Like "*[!(a-z)]*" And (Not In ("*[0-9]*")) And (In ("-"," "))Is Null Or Not Like "*[!(a-z)]*" Or Like ( ) Or (-)Please can smeone help me.James
View 3 Replies View RelatedHello all.
I'm having a problem with a query. I am pulling information from a table that holds demographic info plus some company info. the data in question is the deptno of an employee. This employee also has a jobcode associated with it. I have another table with a list of a few jobcodes.
The data I will retrieve is fname, lname and deptno. If a person is in detno 210 then I want to check his jobcode in the jobcode table. If it is in the table then I want it to return 215 for a deptno. If not then it will return 210.
Does anyone know how this query would look like?
Thanks in advance.
I have taken over a database that has be modified by a number of people over time. I have a forw with tab controls and a some of the fields are critical to be completed before you should be able to progress to the next tab. There are currently validation controls on the controls on the first tab, but if you only complete the first of these controls it is possible to move on to the second tab. The third tab is a subform and and if you try and select this tab, the validation text appears, but you can still switch to that tab which I want to prevent.
Finally, I have deleted one of the controls which was a critical field for completeion. I had assumed the validation was based on the validation on the control and would therefore be deleted but I still get a message saying complete this. I can't work out where there miight be code to make this happen? I'm not sure if anyone can help me with this without seeing the database, but I just wondered if anyone had any ideas what to even look for to help me understand this.
Sorry if all this is a bit vague, but would really grateful if anyone can help me at all.
Question I am looking at some annoying Access database for a charity and got stuck on trying to make something work that they believe used to
Two Tables
Venues
pK Venue ID
Venue Name
Venue Capacity
Booking
pK
Venue
Name
Addr1
Addr2
Addr3
Ect
They have a query call capacity check which does the following
Count Occurrences of Venues then takes this away from venue capacity
Essentially they have a standard access form of the Booking table with a drop down box and want it to only validate if seats are still free at a venue eg if the current count for venue is less than the venue capacity.
Any ideas ?
Hi all
Im currently trying to set validation rules for a form using VBA, does anyone know of a good method of doing this as i'm a bit stuck:confused:
I have a NEW INVOICE button, and the code behind says
DoCmd.GoToRecord , , acNewRec
Now if a user clicks on this buttons 3 times, three blank records get inserted in the table. THis is because I am generating teh invoice number myself, and the invoice_date is defaulted to current date (DATE())
The script written in the Sub Form_BeforeUpdate event to validate if the invoice is empty, if the total is ZERO etc. is all skipped, and I get blank records in the table. I even tried to place breakpoints in the before updates script, but it does not even come inside.
What is the right way to trap data errors, blank records in this situation?
Please help.
Thanks,
Vinai
Hey,
I've been looking at this website (http://learning.north.londonmet.ac.uk/ib212/week7/validation.htm) and i'm trying to find an input mask that lets a user enter in an I.P. address like the IP settings in Network Connection > Properties > TCP/IP > Properties.
E.g. a user enters 19216802. I want this converted to 192.168.0.2 without the user having to enter any '.'
So far this is the closest i've gotten to validating the field
0##.0##.0##.0## whereas 0 means something has to be entered and the # are optional.
Thanks,
Barret
Hey,
In a form I am trying to complete, I want the user to be able to enter in an IP address like so
192168<user hits space bar>0<user hits space bar>1
Would convert to - 192.168.0.1
Is there an input mask which allows this to happen?
Thanks.
Hi,
I have a list of 500 PDA users, spread over 7 offices.
I want to keep an eye on what happens with the devices and their SIM-cards. As they are often swapped between offices and SIM-cards get lost.
I am pretty sure that I don't have to re-invent the wheel.
Do you have any idea of a free/shareware tracking tool for PDA's and cell phones ?
Thanks in advance !