Hi people,
For the Record Validation of: [Return_Date]<=[Service_Date] I get the following error message when trying to save:
"Invalid SQL Syntax - cannot use multiple columns in a column-level CHECK constrait"
Why? How is this SQL anyway? its a validation rule?!?!?!
Thanks. Neil.
Trying to compare start and end dates using a query so this is what i have but nothing is comming up wrong way to go about this? i need to do this for every month till 2012
Expr1: [Start Date]=[Start Date]>1/1/2008
Show: No
Criteria: True
Expr2: [End Date]=[End Date]<1/1/2008
Show: No
Criteria: True
I am trying to compare 2 dates, see if one is less than the other, then do something.
If [Min Request Date] < Now Then
Me.[Request Type] = "New"
Else
Me.[Request Type] = "Old"
End If
BUT I always get "Old" no matter what the min Request Date is. Does the Min Request Date need to be formated somehow.
Hi there,
I'm trying to 'rank' x5 categories that overlap. To determine the ranking i'm utilising date & time (if the dates are equal). I've managed to do this comparing x2 of the categories but struggling with the logic for x3,x4 & x5 categories
I have the data in separate tables by category date & time and in one large table.
Hoping someone can assist as my head is starting to hurt.
Thanks
In my table I have the following 4 fields with the associated date field:
Bronze: 11/1/2013
Silver: 5/1/2014
Gold: 11/1/2014
Platinum: 5/1/2015
I am trying to calculate a value based on comparing the current date to the dates in these fields. I am using the below formula. However, using 6/27/2013 as the current date, my formula keeps resulting in "Bronze" when it should result in "Standard" Am I doing something wrong?
=IIf(Date()<[Bronze],"Standard",IIf((Date()>=[Bronze]) And (Date()<[Silver]),"Bronze",IIf(Date()>=[Silver] And Date()<[Gold],"Silver",IIf(Date()>=[Gold] And Date()<[Platinum],"Gold","Platinum"))))
hi, im not a very good english speaker, so... I have a table where im gonna register some invoices, my problem is that i want to validate that the maturity date has to be major than the emission date, i try this in the" maturity date" column validation rule but doesn´t work, look:
"D_vencimientoRecibo > D_ EmissionRecibo"
well, i hope someone could help me.
I need to setup a validation rule to a date field in a form so the date entered must be a Sunday date. I want the system not to accept the date unless is a Sunday date, is there a way to do so? I appreciate any tips on this.
thanks,
Pablo :confused:
What would the validation rules be between two dates:
>01/09/07 however <01/09/11
and also
>01/09/07 however <present day
How to create a table in MS Office. Current table has name in first column and start & finish dates in other two columns. It is necessary to create a table in MS Access which has name in the first column and validation dates in the second column. For Example:
currently
1. White 16 xxxx19
2. Black 1 xxxx 5
required
1. White 17
1. White 18
2. Black 2
2. Black 3
2. Black 4
Any way to have a form with Dates as column headers to update a table where the dates are stored in rows???
The table set up is like this:
tblOpHdr
DiaryID (PK) - OpDate (Date)
tblOpDetail
DiaryID (FK) - CostCode - MachineNumber - MachineHours - etc
I'm just wondering if there's any way I can do this with a datasheet or a crosstab type setup?
It's Access 2010.
I have built a query to calculate the expiry dates of training courses but I am trying to input a criteria so that only dates within 90 days of todays date show. I am using Date()<90 but it doesn't return the correct information. What the criteria should be for this?
View 1 Replies View RelatedI have a table of records, which has within it two date fields (effectively, a 'start' and 'end' date for that particular record)
I now need to create a query to perform a calculation for each date between the 'start' date and the 'end' date
So the first step (as I see it anyway) is to try to create a query which will give me each date between the two reference dates, in the hope that I can then JOIN that onto another query to perform the necessary calculation for each of the returned dates.
Is there a way to do this?
So basically, if for a particular record, the 'start' date is 01-Apr-2015 and the 'end' date is 09-Apr-2015, can I produce a dataset of 9 records as follows :01-Apr-2015
02-Apr-2015
03-Apr-2015
04-Apr-2015
05-Apr-2015
06-Apr-2015
07-Apr-2015
08-Apr-2015
09-Apr-2015
(The *obvious* solution would be to create a separate table of dates, from which I could just SELECT DISTINCT <Date> Between #04/01/2015# And #04/09/2015# - but that seems like a dreadful waste of space, if that table is only required to generate the above? And it would have to cover all possible options; so it would either have to be massive, and contain every possible date - ever! - or maintained, adding new dates as necessary when they are required. Seems horribly inefficient!)
Is it possible to just select each date between the two reference dates? Or can you only query something which exists somewhere in a table?
Hiya-
I have a database with 5000 entries, corresponding to about 10 entries for about 500 people. Each of the entries is dated, and I need to calculate the time intervals between each person's sequential entries in the table.
One way of doing this is to create another column that contains the date of the previous entry. I can then use DateDiff to subtract one date from the other and give me the difference in days.
This approach falls down if I then work with only a subset of the entries - I would have to re-enter the previous entry dates as the time intervals would have changed.
What I really need is a way of subtracting the date from the date in the cell directly above it. Will Access let me do this, or is there a better way?
Many thanks, Jules.
I have two tables with dates. Between (!) every two following dates in table1, I want to know the number of dates in table2. How do I write an SQL query for this? The tables I have are up to a few hundred records in table 1 and a few thousand records in table2. So to prevent that this takes hours I need a fast query.
To explain the query I need, for example:
table1
01/01/2014
15/01/2014
17/01/2014
30/01/2014
table2
01/01/2014
02/01/2014
05/01/2014
17/01/2014
18/01/2014
20/01/2014
21/01/2014
25/01/2014
So the answer of the query would be 2,0,4.
Explanation:
Between 01/01/2014 and 15/01/2014 in table 1 there are 2 dates in table2 (01/01/2014 is not included between the dates)
Between 15/01/2014 and 17/01/2014 in table 1 there are 0 dates in table 2
Between 17/01/2014 and 30/01/2014 in table 1 there are 4 dates in table 2
I have a master table which shows all transactions per record (person) over a financial year.
Each record person has a seperate package period over which their spend needs to be measured. Therefore although I have all their transactions for the year, I only want to sum their transactions between their given [start date] and [end date] which are in columns.
I need to be able to create a field which sums all expenditure per record between the start and end dates
Name Start Date End Date Invoice Date Amount
Matt 15/5/11 15/9/11 1/11/11 £100
Matt 15/5/11 15/9/11 7/7/11 £200
Matt 15/5/11 15/9/11 12/12/11 £200
In this case I would only want to sum 7/7/11 as this is between the start and end dates
I want to write something like sumif([Invoice Date] is between [start date] and [end date] - not sure where or how exactly
(The start date and end date will always be the same per person)
Is this possible in access?
I have two tables: -
1) Sales data
2) Claims data
I want to anaylse Premium (contained in the Sales Data Table) against Claims (contained in the Claims Data Table). The result I want to achieve is to show a loss ratio (Premium / Claims as a %). I need to show this on a per policy basis (each Table has a Policy Number Column).
Im new to Access and do not know how to go about this.
Hi,
I have imported data from an ERP system into an Access table. This big table contains information about invoices processed last month. 2 of the columns are currency code and payment batch code.
Actually, there are rules that accountants should follow, but they can make errors. We would like to find those error using this Access database.
One rule is that only predefined payment batch codes should connect to a
currency code.
My idea was to create another table, where controllers are able to type in these rules like
EUR CIE
USD CIU
HUF BKH
This table has only 2 columns: currency code and payment batch code and no primary key has been defined.
The 2 tables were joined with the currency code and a query printed only those transactions where the payment batch code from the big table <> the payment batch code from the new table. This shows where accountants made an error.
This is the query:
SELECT [475 Master].*
FROM Tbl_Pmt_Btc INNER JOIN [475 Master] ON Tbl_Pmt_Btc.Cur_Code2 = [475 Master].Currency
WHERE ((([475 Master].Pmt)<>[Tbl_Pmt_Btc].[Pmt_Btc_Code]));
475 Master is the big table, Tbl_Pmt_Btc is the new table that can be modified by the controller.
This worked until more than one payment batch code were assigned to a currency code.
EUR CIE
EUR CIU
It seems that Access can use only one of them.
Can you please advise what to do in order that Access takes both rows into
account and the query prints those transactions booked in EUR where the payment batch code are neither CIE nor CIU.
Is there a simple solution without any programming?
Thanks,
Peter
Hello - I am new to Access and don't know VB.
I am trying to compare 2 tables that each contain the following information:
Fields:
Document Number
Date
Changes (Amendments, etc.)
I would like to see the following on a report:
A - If a document number is on Table 2, but not on Table 1, show these on a "missing documents" report.
B - If a document number exists on both reports, however the dates do not match. Example: Document 123 is on Table 1 with a date of 1/1/1999 in the date field. Table 2 contains the same document in the document number field, however the date field contains 2/15/2005. SHow these on a "Date Differences" report.
C - If a document matches on number and date, however the changes field does not match.
Ultimately, I would like to add other fields to compare as well.
Hope this makes sense to someone out there!
Thanks!
If I have a date column and another column with another consistant date, Can I make a criteria to compare one to the other. Ex:
END_DATE Today's_DATE
06 Feb 05 15 Jun 06
12 Feb 05 15 Jun 06
01 Jan 06 15 Jun 06
26 Mar 06 15 Jun 06
18 Aug 06 15 Jun 06
28 Dec 06 15 Jun 06
Can I make a criteria that will only show the END_DATE data that is before Today's DATE? Does it need to be a new column or can I place it in the criteria of one of these column.
Hi,
I need to compare records in the same table. I know that this is typically accomplished by joining the table with itself. However, this is not entirely suitable for my needs. I need to compare the first record to every other record - excluding itself - and then compare the second record to every other record excluding itself AND the first record. I want to continue this pattern for all the records. Is there any way I could go about doing this?
Any help would be much appreciated.
Edit: Each record has an autonumber generated key
Hey Guys,
Just wondering how I would go about comparing two strings, and spitting the results out a similarity percentage?
E.G. (String 1) Postal Address: "11 John St"
(String 2) Street Address: "11 John Street"
(Output): 80%?
Cheers
Hi
what i want is, if i update one database to new database then
i want to compare tables in these two databases if any table is not matched it should be retrieved,so please tel me the solution for this.
Hi
how to compare one table of one msaccess database to another table in another msacess database. please tel me the steps to do this.
thanks
sri
Hello,
I am a Beginner in MS Access and SQL and I need a query to compare two fields.
I am having two tables; T1 and T2, and I want to compare their
fields TF1 and TF2, and display the non matching fields in new
field.
Example:
Table T1
TF1
Location Louisville
Number 555345
Name Smith
Table T2
TF1
Location Louisville
Number 553450
Name Smythe
Thanks in Advance.:)
Hi all.
I have a Quotation (Table), Quotation Details (Table), with One to many Relationship. Quotation Details(Table)
selects info from Products(Table). Then I have an Order (Table) connected with Quotation (Table) and Order Details
(Table) for ordering products.
What I want to do is to compare, when i make an order, the Quotation Details with the Order Details.
For example in a a quotation the customer is quoted with 4 piesces of modem. Then the next day he comes back with the
order but now he wants 3 modems. I would like to display a warning to the user or smt like that, inform him
that the quotation details are different from order details.
Is it possible??
Thank you in advance.
i want to know if it is possible to compare values (a string) stored in a field with a field of another table?
for example, i have a table named Courses, it has field Course ID...and Course Requirements.
the field Course requirements can accept only 3 value: A,B and C.
i have used a combo for this.
then, i have Student qualifications table. i have also designed a form to input student qualifications.
my problem is that i have to compare qual. of students with the req of the course, to allocate them a specific course. if both values meet, the db automatically allocates the course to the student.