Hi,
My apologies in advance if this has been answered before.
Ok, Here is the question:
Is it possible to filter the values of a field (field 'y') based upon the value chosen in a previous field (field 'x') of the same record? Can this filtering occur within the table itself.
Values for fields 'x' and 'y' are taken from table 'ProductGroup' and 'Products', respectively.
liguor60
I'm trying to create something like an online banking view that shows the running balance as each transaction occurs. I have tblTransactions with fields AccountNumber, ItemDescription, and TransactionAmount. I'm trying to create something that shows these three fields and a fourth field with the running balance.
So if I initially deposit $100 it will show the first record with TransactionAmount = $100 and RunningBalance = $100. Then the next transaction will subtract the Transactionamount for the new record from the RunningBalance from the previous record to get the RunningBalance for the new record. So if I make a purchase for $2, the AvailableBalance for that record is $98. Is this possible with a query? Here's a picture to describe what I'm talking about ....
I need a way to dynamically store a particular value in "field_2" of the CURRENT record depending on whether or not the value of "field_1" of the CURRENT record is identical to the value of "field_1" of the PREVIOUS record within the same table. The table is sorted on "field_1".
So, if the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is also "ABC", then store a value of "PPP" in "field_2" of the current record. IF on the other hand, the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is "XYZ", then store a value of "WWW" in "field_2" of the current record.
I have a report that will use these results to count only the number of records that have a "WWW" in "field_2".
Is this doable, maybe in a query somehow?
I should add that whatever the solution, it needs to be compatible with Access 2000.
Hi,
I have a query that contains the results of repeated tests on a number of persons. The goal of treatment is to get those test results below 50. I need to find, for each person, the period of time (with a start and an end date) during which their test was below 50. The dataset looks like:
ID + LabID + LabDate + Result + Undet
----+------+-----------+-------+------
101 + 21 + 1/1/2000 + 780 + 0
101 + 21 + 2/2/2000 + 320 + 0
101 + 21 + 3/3/2000 + 50 + 1
101 + 21 + 4/4/2000 + 50 + 1
102 + 21 + 6/6/2005 + 1000 + 0
102 + 21 + 7/7/2005 + 900 + 0
102 + 21 + 8/8/2005 + 50 + 1
103 + 21 + 9/9/2005 + 50 + 1
103 + 22 + 9/30/2005 + 567 + 0
What I need is a query that produces the following:
ID + StartDate + EndDate
----+-----------+---------
101 + 3/3/2000 + 4/4/2000
102 + 8/8/2005 + 9/9/2005
I can also provide an attachment with more data, if that would help. Thanks in advance,
I'm trying to update an imported table from an excel spreadsheet with missing details. The table's records are in order so I just need to fill in a blank field with data based on the previous one as shown.
ID Name Location
1 Bob London
2 Larry
3 Harry
4 Jerry Glasgow
5 Paul
6 John Southampton
I need to fill in the location blanks simply with the last location details, so records 2 and 3 with London and 5 with Glasgow. Is this easily done or would I need to pull all the data into an array and work on it there?
I've tried searching for an answer but haven't had any luck.
I seem to need some help!
I have a table with customer information in it ie: name, vehicle, (Key=Id number)...
it is the master link to the repair table ie: mileage, (Key=ROnumber), and repair data..
these two work together beautifull
now I need to add another table, a check sheet for checking over a vehicle.
I create the table and the form however I cannot open a new form with the ROnumber from the second already open form into the newly open form.
(the second form is based on a Query, and I have tried changing it to a SQL statement both with no luck)
is there an example of what I need to be doing to link the ROnumber to the ROnumber in the new form, or create the ROnumber so it will add the data in the linked table?
I need this to open using a button on the open repair form
David
My table has 3 fields, Employee Number (text), Job Description (text) and Current (yes/no). The table keeps track of the Job Descriptions that an Employee has had along with his current Job Description (actually Title is more appropriate a word but client requested Description) So the table has records such as:
0001 - Floor Sweeping - no
0001 - Ceiling Cleaning - yes
0001 - Dumpster Turning - no
The yes signifies that that is the current Job Description for employee #0001 and the others with no are previous Job Descriptions that the employee #0001 has held.
Now - I created a form to add these records to the table and on that form I want a list box to show the records in the table for this employee but I want to sort it such that the current Job Description is listed first and the rest show up in alphabetical order following. I have the query to list all of the Description, but how can I get the current one to always appear on the top of the list?
I am looking to get a query to show my list of customers "Grouped By" [CustomerName], that show only the single [CurrentBalance] field for each customer based on the "Last or Highest" [RecordID].
Also, each customer can have up to 4 different [StockType]'s but at least 1 [StockType].So my results would look like this:
[CustomerName] - [StockType] - [CurrentBalance]
Customer#1 StockType#1 5
Customer#1 StockType#2 4
Customer#2 StockType#1 5
Customer#3 StockType#1 5
I have a field called uniqueID which I would like to update based on 2 other fields that are already populated in my recordset (from running previous queries). I heard it is not possible to do an Update Select like shown below.
select max(uniqueID) from myTable where a = "value of field a from first record in record set" and b = "value of field b from first record in record set"
If it is true that I cannot do an Update Select then I am trying to do something in VBA. How can I Loop each row in the record set and store the values from fields a and b. I would obviously then need to pass those values into the sql above and store the result in a variable. I would then do a straight update to put the value of uniqueID into myTable.
I have the following code that I need to modify:
Code:
Private Sub ChargeReport_Click()
On Error GoTo Err_ChargeReport_Click
Dim stDocName As String
stDocName = "Charges_Report"
DoCmd.SendObject acReport, stDocName, acFormatPDF, , , , "Charge Sheet"
[Code] ....
Currently, this code opens an input box that accepts the ID number for a particular record. Then it attaches a specific report for the selected record to an email. It works fine for this purpose.
I want to modify it so that it attaches one of several different reports depending upon the value of a [Staff_ID] field in the selected record.
I've tried a number of different solutions using an InputBox to get the record ID along with an If/ElseIf/Else construct that evaluates the [Staff_ID] field in order to determine which report to attach to the email, but I cannot find my error.
I'm trying to figure out a way to get my access database to auto-populate data into a field based on the information I type into the first record.
So what I'm looking to do is that when I type a name into the UserName Field it will automatically fill in the rest of the field with the same information.
To clarify I'm looking for a way so that when I type something into one record it will fill the rest of the field in with that same information.
I want Access to automatically generate a reference number for a record based on the values in on two other fields for a given record using a form.
The first field is called Operation Number.
The second is Bag Number.
The reference number needs to be in this format: 19C.3.1
Where 19C is the Operation Number, 3 is the bag number, and 1 is automatically generated. Additionally I need the last number --the automatically generated one--to go back to 1 if with each new bag number.
This is kind of like library catalog numbers. Not sure how to do this.
My table:
tblHeatTreatment
- HeatTreatmentID - PK
- HeatTreatmentDesc - Text
- HeatTreatmentDetails - Memo
My form has a listbox (lstHeatTreatments - Multi-Select disabled) that displays Heat Treatment descriptions and an unbound textbox (txtHTDetails) that I would like to have display the corresponding memo field when a description is selected from the listbox.
This is my code so far:
Code:
Private Sub lstHeatTreatments_AfterUpdate()
Dim myConnection As ADODB.Connection
Dim myRecordSet As New ADODB.Recordset
Dim mySQL As String
Dim selectedRequirementKey As Long
Set myConnection = CurrentProject.AccessConnection
Set myRecordSet.ActiveConnection = myConnection
[Code]....
When I run the code I get an error:
Quote:
Run-time error '-2147352567 (80020009)':
The Value you entered isn't valid for this field
When I debug, it highlights:
Code:
Me.txtHTDetails = myRecordSet.Fields
Within my table if Field 1 has an answer of Self (from drop down), then, I would like Fields 6-12 to auto populate; however, if Field 1 does not have an answer of Self, then leave Fields 6-12 blank.
I am not quite sure how to lay this out. I am using Access 2010.
I have my Assets form and the primary key is the ChargerID, in this form I have an "Add New Job For This Asset" button, which opens up the Jobs form at a new record.
How do I make it so that the ChargerID field is automatically filled with whatever the previous record was instead of being blank.
For example if I have Charger12345 open in the Asset form, I'd like to click the Add New Job button and it automatically have Charger12345 in the ChargerID field of the Jobs form.
I'm creating a database that keeps a track of questions and scores.
The questions in the database need to be dynamic and are changed frequently.
I have a scorecard table which keeps a record of scores and the applicable question at the time the record was saved. I need to do this because in 6 months time we may want to provide feedback. As the question may have changed we need to be able to refer back to what the question was.
I want the question field in my scorecard table to populate with the value in my question table.
I have tried a number of things including setting the question field in the scorecard table to a lookup based on the following query:
SELECT tblQ1.Q1
FROM tblQ1;
This works however only as a list or combo box. I don't want the user to have to select the question. I want it to auto populate, is this possible?
I need to create a New Form control for this situation:
If I enter a date into a field and the choice for another field is equal to a certain value. How can I get the date I entered to be automatically populated into another date field.
For example:
If I enter 11/10/2005 in a date field and I choose either "BN", "BA", or "BT" in a text field, I need that date of 11/10/2005 to be automatically populated in another date field on the same form.
Any help is greatly appreciated.
I (will have) a form which a user fills in to enter new data.
I have two fields,
"Branch" and "Branch ID" (Branch ID will not be on the form, just in the table)
Branch will be fed by a combo box with seven choices. I would like it so that when "Branch" is populated it autopopulates Branch ID with a code which relates to the branch, so for example
BRANCH BRANCH ID
Braintree BRA
Colchester COL
Using Access 2010. Fairly new to automation and macros.I have two tables (tblProductReceived and tblBins) and a form (frmProductReceived).A field in tblBins corresponds to a location the bin is at (named BinLocationID) and the tblProductReceived table tracks product that a specific bin has received.
What I need is for the tblProductReceived field PRLocationID ([tblProductReceived].[PRLocationID]) to be automatically populated with where the bin is at ([tblBins].[BinLocationID]) when selecting a specific bin in the form (frmProductReceived).
Table1 contain Two fields (3Months) and (6Months)
Table2 contain Two fields (3Months) and (6Months)
the table 2 is the source of a form that will let the user change the numbers. table 1 should change Date1 and Date2 Fields based on the two fields (3months) and (6months) if i want to make a lookup wizard it should be changed manually and if i make a calculated field i can't find other tables in the expression builder
I have two tables that are joined - called A and B. A has two fields, "PLACE" and "RAND" and is joined to B via field "RAND". Other than "RAND", B has several fields named 01 TOTAL, 02 TOTAL, 03 TOTAL, etc...for about 60 fields.
The "PLACE" field in table A has data that is 01, 02, 03, ect.... How do I structure a query so that whatever "PLACE" is, I can match the XX TOTAL value? In other words, i need to have the query field header be somehow dependent on the value in "PLACE".
Is this even possible?
I am making a very simple 'registration' database for a children's event in a couple of weeks.I the table/form there is a checkbox field called 'consent' which, if checked, indicates that a child can leave the event without parental consent.
There is a report printed on each child (a registration page which the leaders get a copy of). I would like on this report a 'red box' to appear if the child cannot leave without permission (i.e. the consent box is not checked). I would also like this 'red box' to appear on the form. I had thought of doing it this way - but I'm not sure if it's the best, or if it's possible:
Have a field in my table called 'consentindicator'. When the 'consent' box is checked, there is a period ('.') placed into the 'consentindicator' field. It is set to turn red when a period is present. That way, when the consent box is checked, a get a red 'box'.
I have a main table which is autonumbered on unitid, I have another table which is linked via the unitid which holds items purchased for the main table, so the second table is a subform of the suppliers and will have multiple entries of the same unitid. What I would like to do is when an item is entered into the second table, check the main table to see if it exists, if it does populate the unitid field with the unitid from the main table, and if not exist create a new record in the main table with the next unitid number.
This in essence is what I want, bearing in mind that the tblinvoices is a subform and the tblmain is not open.
If ([tblinvoices]![Unit] = [tblmain]![Unit]) Then
[tblinvoices]![UnitID] = [tblinvoices]![UnitID]
End If
I'm trying to complete a database.
It is to manage details of pupils with additional support needs, and plan for the extra arrangements the school will provide for assessments.
It has 2 Tables
tbl-PupilDetails
-ScottishCandidateNumber primary key (Unique number which identifies pupils to the exams board)
-Forename
-Surname
-DOB
-YearGroup
-Class
-NatureOfNeed (memo)
-EvidenceOfNeed (memo)
tbl-SubjectLevelArrangement
-ID Primary key, Autonumber
-Pupil foreign key to tblPupilDetails
-Subject
-Faculty
-Level
-Arrangement
I currently use forms for adding new pupils, and updating pupil subjects/arrangements/levels.
I also have forms to search for specific pupils, and to create lists for faculty heads showing which pupils are taking subjects within their faculty and the arrangements we expect to provide.
I use the forms to run queries, which can then output to reports for printing.
Where I am currently having an issue is the faculty field in the tbl-SubjectLevelArrangements. (If I didn't have to report to faculty heads I would just leave it out, but management will insist.)
Currently I have a form with dropdowns for adding subject, faculty, level and arrangement manually. This is acceptable for the subject, level and arrangement because they are completely interchangeable and dynamic throughout the academic year as pupils may drop down a level, or change the type of arrangement they require.
However as faculties are inextricably linked to subjects, I want to remove the possibility of human error. i.e. when a user (me) chooses either geography, history, or RE, then the faculty will always be Humanities, likewise if the user chooses French, German, or Spanish, then the faculty can only be Modern Languages etc.
I'm convinced there must be a very simple way to ensure that the faculty field prefills based on the limited keywords available in the subject field, but I just cannot figure it out.
Please see attachments.
POST.zip (384.0 KB)
database.zip (58.8 KB)
I made a report that have 'txtRemarks' field, I just want to get remarks automatically in 'txtRemarks' field based on the other field in report. that is why I used a function like below:
Code:
Private Function Estd_Remarks(Estd_Point As Long) As String
If Me.Estd_Point < 20 Or Me.Estd_Point = 0 Then
Estd_Point = "Earlier Established"
Esle
Estd_Point = "OK"
End If
Estd_Remarks = Estd_Point
End Function
And I wrote in properties 'On Format' event this code below:
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
If Estd_Remarks = "Ok" Then
Me.txtRemarks = "Ranked & Sortlisted"
Else
Me.txtRemarks = "Estd_Remarks"
End If
End Sub
When preview the report then it shows
Compile error
Argument optional