In my table i have three columns for data entry. They are Subject 1, Subject 2, Subject 3. I need to be able to produce and query that will bring results up if for example 'english' is in anyone of these columns. I know how to do it for just one but i need it to be able to check all three columns?
Hope this makes sense
Sam
Hi,
I have been trying to figure this out for a long time. Any tips/helps is much appreciated it.
I have a table with 3 columns(SSN,DeductionType,DeductionAmount). Let say I have 100 employees. There are 3 records per employee, because each have 3 different deductionType(TypeA,TypeB,TypeC).
I want to create a queryTable that will result with 1 record per individual, with TypeA,TypeB,and TypeC as column names and the DeductionAmount as their values. Make sense? Below is an example of what the new table should look like:
SSN--------------TypeA-------TypeB-------TypeC
022-58-5898------ $10.35-----$25------------$14
036-89-5487-------$5----------$45.69---------$47.33
...
..
.
Thank you VERY much!
By the way, if QueryTable is not the method to do this, please let me know how.
Joe
Hi All,
I have a list box and I populate it with records from a "Select" query. I am using VBScript to do this. Here are my codes:
gr1_list.RowSource="Select Criteria from CriteriaList WHERE Criteria='" & cvalue & "';"
My "CriteriaList" table has two columns; Criteria and CriteriaDescriptions.
The question is, what if in my list box I want to be able to see both 'Criteria' and 'CriteriaDescription?' How would I code this?
Thank you.
I am trying to concatenate values from seperate columns. Which is fine, however if there are no values in any of these columns I wish to include a dot (.). I also need to add a dot (.) inbetween values.
So for example
Column1 Column 2 Column 3
B11 Europe
would concatenate as:
B11.Europe.
Hi,
I want to make the default value of my column "TimeonOW" to be the difference in months(past 12) from the entered date in "OWStartDate" and the current system date.
For for example
mm/dd/yyyy
CurrentDate - OWStartDate = TimeonOW
07/01/2007 - 05/01/2005 = 26
I played around with the DateDiff function but to no avail.
=DateDiff("d",Now(),[OWStartDate])
=DateDiff("d",Now(),#2004-31-12#) etc
The reason behind this is because I need to count how many people fall into different month span categories, maybe theres a better way?
Thanks in advance.
Hi,
I am trying to compare two columns' values within the same QUERY table, but I kept on getting the "Data type mismatch in criteria expression" error. What am I doing wrong?
Here is my Select Query Statement:
SELECT qryDedparmDedetail.EMP_ID, qryDedparmDedetail.[Employer Amt], qryDedparmDedetail.[Employer Actl], qryDedparmDedetail.[Admin Amt], qryDedparmDedetail.[Admin Actl], qryDedparmDedetail.[Employee Actl], qryDedparmDedetail.[Employee Amt], qryDedparmDedetail.FirstOfSTATUS, qryDedparmDedetail.FirstOfAGENCY, qryDedparmDedetail.FirstOfTITLE, qryDedparmDedetail.FirstOfFORMAT_NM, qryDedparmDedetail.RepUnit, qryDedparmDedetail.FirstOfDEDTYPE_CD1 AS Expr1, qryDedparmDedetail.SumOfNBR, RepUnit.REPUNITDESC, qryDedparmDedetail.LeftType
FROM qryDedparmDedetail LEFT JOIN RepUnit ON qryDedparmDedetail.RepUnit = RepUnit.REPUNIT
WHERE (((qryDedparmDedetail.[Employer Amt])<>"Employer Actl") AND ((qryDedparmDedetail.LeftType)="01"));
I would like to compare the values of several columns in the same record and remove any duplicates. So...
ID | Col1 | Col2 | Col3 | Col4 | Col5
-------------------------------------------
1 | A | B | C | D | C
2 | C | C | C | D | D
3 | A | A | B | A | D
In the above example I would remove one of the Cs in row 1.
Two Cs and one D in row 2 and two As in row 3.
At the moment I have the value of each column stored in a variable and each one is compared against each other using LOTS of If statements.
I have a column that's called "Date" which stores values for begining to end date as 'Text' like: 070314-073114 So I need to split it to 2 columns that has the Start Date as 070314 and End Date as 073114?
This database is still in Microsoft Access, and eventually after cleaning it up, we will move it to SQL Server.
I'm new to Access programming. I want to setup an Archiving/Storage Database which contains data of boxes with folders in it. The data would be the box number, begining folder, ending folder and box description (See Below).
[BoxNum] [FromRange] [ToRange] [BoxInfo]
123456 10000 10100 Case File
123457 10101 10954 Batch File
123458 11234 11545 Case File
I would like to setup a database that once the data is entered a user can open a form and search for a folder like 10054 by entering it in to a field like [SearchBox] and search the values between [FromRange] and [ToRange] and retrieve that boxes information 123456.
I need to create a query that combines two columns (lets say Column A and Column B for example) however the problem is that whatever non-null values that are in Column B must replace any value in Column A. If Column B has a value that is null then Column A's value is shown.
I have an example of what I'm working with (access file) and what result I want (excel file).
I have a form for student attendance that is bound to a query and stores a temporary value for ClassesAttended in a StudentEnrollment table as faculty enters the attendance. They then run an append query to write the temporary records to a StudentAttendance table. Because the ClassesAttended field is bound, when the form is opened, it recalls the last number entered for that student in that class as entered by the faculty the last time attendance was updated. I tried leaving the field unbound, but the first value enter into the first record of the form is updated automatically to all subsequent records.
Is there a way to change the properities, use code, etc. to assigne a null or 0 to the ClassesAttended field when the form opens, without the first updated record to propagate through the reaming records?
I have a columns that do not incur a count value within the time period of my query, yet i still want them to be displayed with a 0 or no value in the query view, how do i do this?
View 1 Replies View RelatedI have an unbound combo box with three columns, which get the values from a query. The first column is hidden. When I close the combo box after my selection, only the second column value is shown on the box. Is there any way that both the second and third column being shown on the box after selection?
View 3 Replies View RelatedI have a table that has two columns "Nationality" and "Gender". I wanted to run a query that will Group the nationality and then split the gender column into two columns and after that it will count both gender columns for each nationality. When I posted this question in "Reports" section I got the suggestion to use the SELECT COUNT in SQL. It worked but only for nationality. I couldn't get it work for the Gender column. I searched alot and the only thing I got was the SQL function to split data from one column into two but that also didn't serve the purpose (check the link to see why: [URL]) At last, I went on to create a cross tab query. Selected Nationality as Row header, Gender as Column header and Customer ID as calculation point. And there I got the result I needed. The SQL Code looks like this:
Code:
TRANSFORM Count(Register.[Customer ID]) AS [CountOfCustomer ID]
SELECT Register.National, Count(Register.[Customer ID]) AS [Total Of Customer ID]
FROM Register
GROUP BY Register.National
PIVOT Register.P_Gender;
Crosstab query did the trick..
I'm trying to make a database to track inventory or several items. Basically, I have four tables:
1) RawMaterialList - includes a list of all raw materials.
2) PartList - includes a list of all finished product using said raw materials.
3) RawMaterialRecieving - contains details from each packing slip of incoming raw materials.
4) ShipmentRecord - contains details of daily shipments.
Each of these tables is fed by a form of the same name. I should note at this point that I basically taught myself how to use Access and I imagine I'm in the dark about quite a few things it can do. I've made several databases over the last few years, but I'm stumped at this point.
Here's my problem. In the form RawMaterialReceiving, I have several fields aside from basic information:
1) Item - a list of of raw materials from table RawMaterialList
2) Description - also dependent on info entered into table RawMaterialList
3) Quantity
But, I have 12 of these instances.
Item1, Item2...Item12;
Description1, Description2...Description12;
Quantity1, Quantity2...Quantity12.
My problem is I want to add up the quantities of each raw material and I'm not sure how to go about that. Lets say on May 13, I received 15pcs of Part A and 20pcs of Part B. I enter this information as Item1 and Item2 respectively. On May 14, I received 30pcs of Part B. I enter this information under Item1. Now I want to add up all of Part B (50 pcs). But Part B has one value listed in the field Quantity1 and one value listed in the field Quantity2.
Example:
1st Entry:
May 13
Item1 = PartA Description1 = PartA's description Quantity1 = 15
Item2 = PartB Description2 = PartB's description Quantity2 = 20
2nd Entry:
May 14
Item1 = PartB Description1 = PartB's description Quantity1 = 30
How do I get it to add up Part B to get 50pcs?
Access 2010 - I would like to use DLookup to show results values from a table and display in a unbound textbox on a form. the results from each column in the table need to be on seperate lines, a break if you may. Here is the code I have so far.
Code: txtKeywords = DLookup("colKeyword", "tblKEYWORDS", "cboCategory = '" & txtcategories & "'")
In colKeyword Column In tblKEYWORDS table match what i select in cboCategory Combo drop down box and populate txtcategories textbox on form
What I would like to do is show All colKeyword results in textbox [txtcategories] and display each result on its own line!
example
entry1
entry2
entry3
entry4
Hello
I have two tables tblCList and tblCode. The primary key of tblClist is an autogenerated number which is the foreign key to the tblCode.
The tblCList has another column names sClist.
whenever I import values from Excel into the tblCode, I need Access to look up the text values from the sClist in the tblClist and insert the appropriate number corresponding to the entry in tblCode.
Please Help
Thanks
I was able to use the UNION ALL qry. But, when I have another file (like original2) that does NOT have all the columns listed in the UNION ALL qry, I get a Parameter value box asking for the missing columns when I run the qry.
Example:
original1IDDateGroupChristianJohnnySteve 18/5/2013A1528/5/2013B338/5/2013C2348/5/2013D2358/5/2013E5
original 2IDDateGroupChristianJohnny18/6/2013A212528/6/2013B2338/6/2013C2248/6/2013D22
The UNION ALL qry includes all the possible resources ( includes all the possible column fields Christan, Johnny, and Steve).
When I run the UNION ALL qry with the original2 file, An "Enter Parameter Value" box is displayed with the mssing column name "Steve".
Is there a way to Map the original2 table into a working table with all the columns, or use VBA code to construct the UNION ALL qry to only include the existing columns? My data has variable columns and I'm trying to avoid the parameter popups.
I have a MS ACCESS 2010 database with a data table which i am trying to create a query from. I have 6 columns of data( one with an ID Field and 5 Name Fields). Below i have made examples of how it first appears as a simple query and the second will show you what i would like it to look like.
What the simple query looks like: [URL] ...
Second what I want the query to look like: [URL] ....
Currently I'm building tables and forms. My first table (called Clients) lists the details of fictional clients. My second table is for invoices.
In my invoices table, I wish to link the column for client reference (note: stored in the Clients table) to the column that precedes it. This column will list the clients’ names and is selected from a drop down list that is linked to the Clients table.
What I want to do (if its possible) is to have the respective client ref. automatically show up in the next cell once I've selected the client to whom the invoice relates?
Am I making sense? Is that possible? If so, how do I do it?
Secondly, how do I do a sum of selected columns for my “totals” column? Basically, I want to add the figures found in several cells that precede it?
I'm affraid my confusing topic title is an indicator of how confused I am by this. I can't even understand the variables well enough to fully utilize Access Help or the Search function here...
What I have is a database hat has column headers that look something like this:
Customer_Name, Order_Date, Qty_Ord, Unit_Price, Total_Price
What I'm trying to get is a query output that will have
Customer_Name, Total Orders (in Dollars) for January, Total Orders (in Dollars) for February, Total Orders (in Dollars) for March, etc.
I've been able to set it up to SUM for one month, but not multiples.
I know I'm totally lame (for proof read any of my previous posts) but you guys totally bailed me out the other time I asked a lame question.
Thanks in advance!
I have a report in which a textbox generates numerical values and letter values. I want to...On report load - if textbox = numbers then hide otherwise show if it contains letter values.
View 9 Replies View RelatedI'm using Access 2010. I need to calculate a score based on values selected in a table by looking up corresponding values in other tables. I have a "Project" form to create new entries into the Project table (see Table 1). When I create a new project record, I will select values for the Payback and Need fields by selecting options from a list. The Payback list is pointed at Table 2 and the Need list is pointed at Table 3. In the below example, I created the "ABC" project and selected "1 year" for the Payback field and "Repair" for the Need field. Pretty simple.
Now that I have the "ABC" project loaded to my Project table, I'd like to create a report that will show a "score" for this project. The score should be calculated as follows: Payback Impact + Need Impact. In this example, the score should be 30 (Payback Impact of 20 + Need Impact of 10).
I have the following dataset in a table called NR_PVO_120. How do i pick out a number (which can change but let's say, 6) of UNIQUE OtherIDs without excluding any OtherIDs under any fax numbers?
So, if you pick OtherID from Row7 you then also must pick OtherIDs from rows 8 and 9 because they have the same fax number. Basically, once you pick an OtherID you're then obligated to pick all OtherIDs that have the same fax number as the one you picked.
If the number requested (6 for this example) isn't possible then "the closest number possible but not exceeding" would be the rule.
For example, if you take OtherIDs from rows 1-10 you will get 6 unique OtherIDs but row 10 shares a fax with rows 11 and 12. You either need to take all 3 (but that will raise the unique count to 8, which isn't acceptable) or skip this OtherID and find one with a fax that has no other OtherIDs and that isn't on the result set already. My result of 6 UNIQUE OtherIDs will need to contain ALL OtherIDs under any fax the existing OtherIDs are connected to.
So one solution is to take rows 1-6, 26. Another is to take rows 1-4,10-14.
There will be many possibilities (the real dataset has tens of thousands of rows and the number of people requested will be around 10K), as long all OtherIDs connected to all faxes on the result set are part of the requested number (6 in this case) any combination would do.
A few notes.
1.Getting as close as possible to the requested number is a requirement.
2.Some OtherIDs will have a blank fax, they should only be included as a last resort (not enough OtherIDs for the requested number).
my table (NR_PVO_120)
Row OtherID Fax
1 11098554 2063504752
2 56200936 2080906666
3 11098554 7182160901
4 25138850 7182160901
5 56148974 7182232046
6 56530104 7182234134
[code]....
A few sample outputs
one solution is taking rows 1-6 and 26.
OtherID
11098554
56200936
25138850
56148974
56530104
56148975
Another solution is taking rows 1-4 and 10-14.
OtherID
11098554
56200936
25138850
56024315
56115247
56148974
This is for a fax campaign, we need to make sure no fax number is faxed twice, that all people connected to that fax number are contacted under one fax sent.
In Access 2010 I have a Data Entry Form on which I have an unbound textbox in the header that the user can put a default date in. In the body of the form is a bound textbox that records the date and the default value is set as =defaultdatestat (obviously the name of the box in the header).
Problem: The default date shows up perfectly until a value is put in any of the other text boxes.
For further info : If you put values in text boxes default value disappears; if you then push escape the default value reappears when the values in the text boxes disappear.
I have a query with an INNER JOIN and ORDER BY that is working great. Now, using the same JOIN, I need to update values in one table with the values in another. I thought it would be simple until I learned you can't do an ORDER BY with an UPDATE. Is there another way to achieve the same result? If you remove the 'ORDER BY', the statement below doesn't produce an error but the results are not correct:
UPDATE TableA INNER JOIN TableB ON (Left(TableA.CDN,6))=(TableB.CDN)
SET TableA.HCC = TableB.HCC
WHERE TableB.HCC Like '241*' AND TableB.BBB = 'X' AND TableA.CCC = "1234" AND TableA.HCC IS NOT NULL
ORDER BY TableB.HCC, TableA.CDN;