I want to retrieve a users account balance for a certain year and was thinking dlookup may do it but am beginning to wonder.
I have fields in the table for years 2004 - 1012. Based on the users input I would like dlookup to fetch the info from a certain year for a particular person. Roughly presented, dlookup(yearx,"tbl_InfoTable",username = 'Mike')
Can I get dlookup to accept a variable for the field name, ie yearx?
Is there a better way to quickly grab the info I need?
I am creating a 2 level report to confirm an order. Main report already created, runs successfully called as subform/subreport under "OrderDetails" form. Linked to master using Order.ID. There are two versions of the confirmation report that have different layouts for different program types.
The hangup comes when I try to add a "Class Dates" subreport. It lists dates of individual classes and Skip dates. I have created the subreport as "srClassDates". When I add it to the main report, it lists the records. However, when I try to link it to the Main report, an error message box appears with the "object variable or With block variable not set".
I have tried rebuilding both the main and subreports, rebuilt the query, have not found anything that changes the result.
Linker has been working successfully on other subforms. Report with groupings works fine, but I need data from 2 tables both linked to order.id.
Error 91 - Object variable or With block variable not set
I am getting this error telling me that an object variable is not set.
I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?
This code runs fine the FIRST time, however trows up a message the SECOND time it is run.
The error is on the line ".Range"
I am trying to sort records which have been exported to Excel.
Dim LR As Integer LR = 5 Set xlApp = CreateObject("Excel.Application") xlApp.Visible = True Set wbRef = xlApp.Workbooks.Add With wbRef
wbRef.Activate .Worksheets("Sheet1").Activate With ActiveSheet .Range("A2", .Cells(LR, "O").End(xlUp)).Sort Key1:=.Range("C2"), Order1:=xlAscending, Header:=xlYes End With end With
I have two reports running off of the same crosstab query. I copied one report to make the second report, then modified the second report to change the background of column fields satisfying certain conditions. These lines of code were added to the Detail_Format section, in color below. The report with the extra code lines does not error--the original report errors.
Code: Option Compare Database ' Constant for maximum number of columns EmployeeSales query would ' create plus 1 for a Totals column. Here, you have 9 employees. Const conTotalColumns = 11
[Code] .....
If I say OK (rather than debug) after the error message, I can then click the button for the report again and it runs without complaint. And, as I said, the report with the added code never errors.
I have a networked database. It is accessed with computers that have both Office 2002, and office 2003. I get the following error message on computers with Office 2003:
"Object variable or With block variable not set"
It happens occasionally and the problem generally fixes itself so I dont think there is anything wrong with my coding.
And when it happens on the computers with office 2003 the ones with office 2002 can open the database fine.
The following block of code was working great until I came into work this morning. This routine is called from the OnClick event of several combo boxes. When it does, I recieve the error listed above (Object variable or With block variable not set) on line:
If Me.cbxAss_Filter <> "All" Then
Any ideas? I'm running on no sleep in the last 24 hours so I'm sure I'm missing something simple
The code itself checks the contents of a form and builds a string of conditions which I apply to the Form's filter property to filter records.
Code:Public Sub CreateFilter() '************************************************* **** 'Name: CreateFilter 'Purpose: Generate a string to filter the form 'Inputs: None 'Outputs: None 'Instigates: Me.Filter ' 'Updated: 11/30/06 'By: Chris Lounsbury '************************************************* **** 'Vars Dim strFilter Dim lngLength As Long strFilter = Null strFilter = "" 'Each filter box has its own check for contents If Me.cbxAss_Filter <> "All" Then strFilter = "assigned = '" & Me.cbxAss_Filter & "' AND " End If If Me.cbxAction_filter <> "All" Then strFilter = strFilter & "action = '" & Me.cbxAction_filter & "' AND " End If If Me.cbxStatus_filter <> "All" Then strFilter = strFilter & "status_rsrch = '" & Me.cbxStatus_filter & "' AND " End If If Me.Combo34 <> "All" Then strFilter = strFilter & "rims_flags = '" & Me.Combo34 & "' AND " End If If Me.cbxAAMB_filter <> "All" Then strFilter = strFilter & "aamb = '" & Me.cbxAAMB_filter & "' AND " End If 'Check if filter string was built If strFilter = "" Then Me.FilterOn = False Else 'Determine length of Filter String 'minus the trailing ' AND' lngLength = Len(strFilter) - 5 'Chop off ending ' AND' and set the form filter If lngLength <= 0 Then Else Me.Filter = Left(strFilter, lngLength) Me.FilterOn = True End If End If 'debug 'MsgBox (strFilter) End Sub
I get this error message, " object variable or with block variable not set", when I'm in the design view of a form wanting to use the command button wizard. Using a brand new database/blank I imported a table from my database in question. I then tried to make a new form and put a button on it. It worked for awhile but then when I close the database and reopen it to add another button to the same form, I get the error message again. It isn't a problem that is specific to my homeschool database. It affects all the database I use/maintain as well as any new "test" databases I've made trying to figure out this problem. I looked at references before and after the error occurs and there is not difference. I've also looked at code but don't see anything code that requires variables to be defined. In the case of the test database with one table and one form there is no code to look at until I make a button before exiting and even then, I don't see anything weird.
I would appreciate any help you can offer.
I've attached the original database I was working on when the problems began.
Is it possible for a database program to adjust security levels on certain reference libraries when installed on ones computer, thus making all other database act up that are using those libraries?
Once client details have been entered into frmclientdetails and the user has clicked cmdopenques, I would like frmhealthcheck to default to the client details entered. I've tried setting variables in VBA & using a queries/pop ups but can't seem to get this to work
I have created a Sales Report with Groupings of KeyID then CustID. I am not displaying Detail, CustID Header or Footer. In the KeyID Footer I need to display all CustID's that are included in the KeyID totals.
I have tried adding this code but get a error 2427. GroupFooter3 is the CustID footer.
Private Sub GroupFooter3_Format(Cancel As Integer, FormatCount As Integer) Let KeyGroup = KeyGroup & "," & Me.CustId End Sub
Private Sub Report_Open(Cancel As Integer) Dim KeyGroup As String Let KeyGroup = "Includes" End Sub
Also I have added a text box with the control =[KeyGroup] which doesn't seen to work.
Can anyone see where I've gone wrong. The purpose should be if the value in the query is 0 or less (a minus amount) and the order number and part number matches the order number and part number on the form then a warning should appear. It's not picking up the record for flagging when it should:
If (DLookup("OutstandingQty", "qryremaininginvoiceamount", "OutstandingQty <= 0" & " And [OrdNo] = " _ & Me.[OrdNo] & " And [InvPtID] = " & Me.InvPtID)) Then
I have a table which has a list of trades (Builder, Carpenter, Painter etc) going down the side and going across the top I have the number of employees (1Emp, 2Emp, 3Emp). The values in the table show the charge for that number of employees for that trade.
I have a form which has three combobox's that show the Number of Manual Employees, Number of Clerical Employees and the number of working directors and a combo box that shows the trade. What I want to happen is when the user clicks a command button on the form the charge for the total number of employees for that trade is shown in a txt box.
I have the following code attached to my button:
Private Sub GetValue_Click () Dim TotalEmployees As Integer
Value = Dlookup(TotalEmployees & "Emp", "ValueTable", "[Business] = Forms![Form1]![Business]")
End Sub. When I type "[3Emp]" in the Dlookup it will work fine and finds the charge for that trade. But when I pass it the Result from the addition and concatenate it with "Emp" it doesn't seem to work.
I originally thought it was because I declared the TotalEmployees as an Integer by I also tried declaring it as a string - to no avail. I just can not figure out why it will not look up the TotalEmployees.
I would much appreciate any help on this on any suggest as to how I can get the values from my table.
Please help prevent my laptop from being smashed against a wall numerous times and then being thrown out the window, after all, the wall is mostly innocent in this situation.
I have read post upon post and other dim references to DLookup in the Access Help file, etc. I am generally a bright guy (although inexperienced in DataBases, VBA and some forms of lovemaking) but I have not been able to figure out the DLookup function. Could you please give me a VERY simple explination of how to use this function and it's expressions?
If it will help, we can use the following senario...
Table_Special_Needs Special_Need_ID Special_Need (Data Includes: Initiatives, High Ropes, etc.) Standard_Price
I would like to know if i am doing an Inventory in an Invoice Program and i want the [quantity] from a subform on the Orders Form to be deleted automatically from a Products Table , Would the Dlookup Function Help and if yes how would i implement it ?
Firstly, thank you all for allowing me into your group!
Secondly however, PLEASE HELP!
I've created a database for storing students details and exam records for my university department, and everthing is fine except for one final problem: In order to allow final grades to be calculated all student marks have to be stored numerically, but each number corresponds to a code: eg N=0, G2=1, G1=2 .... A1=22
I'm trying to get the student marks report to display not just the numeric code, but also the final code eg, C2. To do so I've been trying to use DLookup as follows:
where "Grade Code" is a field in the Lookup Table (ie, it lists the A1, A2), "Lookup Table" is a table listing all the numbers and their corresponding codes, "Score" is the numeric score in the "Lookup Table" table, and "Total Grade" is a calculated (Numeric) field in the open report (though created in an accompanying query). I just can't get it to work however!! When I run the report, the column is just blank, and nothing I do seems to be able to get the corresponding code (Eg, B1, B2) to appear on the report!
Please help me if you can, I'm not kidding when I say my job is on the line with getting this database to work! Once I've got this sorted, all I need to do is find a way of letting the secretaries input the alphanumeric code, but the database automatically stores that as a number. I figured however, that sorting the first problem will go some way to finding out how to sort the 2nd one!
Dear all, How are you? I need your help. Can you help me in this DLOOKUP function. I want to retreive "covered period" from financial statement table where investment id = the value of investment ID from Financial statement form. This is the syntax: x: DLookUp("[PeriodCovered]","Financial Statements","[InvestmentID] = " & Forms!Investments!InvestmentID)
I am trying to use a dlookup to return the price of an item that meets two criteria. This is what I came up with, but it doesn't work. The part after the AND works by itself, but when I combine the two I either get a #Error or no values that meet the criteria.
Any suggestions? I can provide more info if needed.
Expr3: DLookUp("[Crt plan price]/1000","CPC List","[Plant] = ' " IIf(IsNumeric(Right([Date Code],2)),"Unk",Right([Date Code],2)) ' " And [Material] = " & [Item])
I am trying to set a criteria in a DLookup and I don’t know if it’s possible. I’ve managed to get a result using the following code in a form but it only matches an exact date.
What I really need is to be able to do a between criteria on the [Date] field and check out whether that fits between [ContractStartDate] and [ContractEndDate] and then return the Price according to the [Date].
I actually want to run it as a query but have no idea how to do this. So, can a "between criteria" be put into a DLookup? and can it all be put into a select query? If so how? If not, what better way it acheive the desired outcome?:confused:
I've got a dlookup problem, i'm working on an adp recreating from an mdb. I've got a main form called contract_sessons and then a sub form called session_contracts and a sub form in that called consessions. In the consessions this holds ths dates for each session what i'm trying to do is lookup the period for the date in the table called dates. The current code I'm using in an unbound field is =DLookUp("[Period]","[dates]","[date]=Forms![Contract_Sessions].Form![Session_Contracts].Form![conSessions].Form![Date]") but all that appears is #error.
I know there are lots of questions relating to this function but I ahve searched and cannot find an answer. Can I add a Dlookup to a field that calculates a sum of the fields based on todays date? I am not very good a coding so any help welcome. I guess I am asking if Dlookup can be combined with Sum and Date()
