Hi, In the example attached below how can I see the "cut off date" that I am prompt to enter in the fourth field of query1-a (I would like to see it for each one of the record that are displayed when the query is run and then append it to a table)
Cheers,
In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
I have an append query which runs from a command button. It transfers all the fields I want it to but when I run the query when in one particular record it not only appends the field for the current record but appends the fields for every other record in my table. I know I should be running the query using stLinkCriteria but I'm not sure on the syntax for the code, see below:
I would like to run an append query but only after I have checked a table for existing data. I want to see if a ralicarID exists in a table and if it doesnt the query should run. if the railcarid does exist but also has a check in and check out date then the query can also run.
I was thinking something like this
Dim RailcarInDatabase as number ' run query here that checks for the railcar id and returns a value if railcarID in table then RailcarInDatabase =1 else RailcarInDatabase =0
And if If RailcarID in table and DateInShop is not null and DateOutShop is not null then RailcarInShop = 0
Something like that which will allow me to run the query only if the car is not in the database or it is currently not in the shop.
I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID
I use the following code as normal Private Sub Command19_Click() On Error GoTo Err_Command19_Click
Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.
I have a table of values in a table called UpdateTable. Before i do the update though i want to copy the entire record for archive purposes. I would like to know how to create an append query that uses another query as the criteria. ie;
UpdateTable - holds current values to be used to update MainTable MainTable - holds all the data ArchiveTable- a copy of the entire record that was updated even if only one value was updated
I would like to know how to use a query as the criteria for an update query so I can get a list of all CarIDNumbers in the UpdateTable and use that as the criteria for which records in the MainTable I want to append a copy to in the ArchiveTable.
Basically I need all the CarIDNumbers in the UpdateTable because each time I want to append a copy of all of the records and after each process I will delete all the records in the UpdateTable.
Is it possible to append two queries? The queries have the same layout and labels...it's just a matter of combining the data into one datasheet view.
The two queries are below:
1) SELECT prc.Market AS Geography, trp.Product, trp.Indication, trp.[Variable Name], trp.Period, Round(prc.Index*trp.[Variable Value],2) AS [Variable Value], trp.Outlet, trp.Daypart, trp.[Program Name], trp.Len, trp.Creative, trp.Campaign, trp.[Campaign Name], trp.[Media Type], trp.Vendor, trp.Channel FROM tblTRP AS trp, tblTRPpercent AS prc WHERE (((trp.Indication)=prc.Indication) And ((trp.[Media Type])=prc.Type) And ((trp.Geography)="National") And ((trp.Month)=prc.Month));
2) SELECT prct.DMA AS Geography, tv.Product, tv.Indication, tv.[Variable Name], tv.Period, Round(prct.percentUniverse*tv.[Variable Value],6) AS [Variable Value], tv.Outlet, tv.Daypart, tv.[Program Name], tv.Len, tv.Creative, tv.Campaign, tv.[Campaign Name], tv.[Media Type], tv.Vendor, tv.Channel FROM tblTVOtherMetrics AS tv, tblDMApercent AS prct WHERE (((tv.Geography)="National"));
I have a table that I want to append to another table, but I do not want to duplicate records if the check number is already in the table I am appending to. I have tried <>[deposit].[check_number] or not like [deposit].[check_number] or not [deposit].[check_number] but I always get prompted to enter a check number... therefore the criteria statement not working. do not know what I am doing wrong.
Is there anyway to change the criteria in a field without going into design view I bascially need to be able to type in a particular item in a certain field in a query and it return all the results for that one.
The database has over 160000 records and when I try using a form it takes forever.
hi Guys, I have been looking at different post and checking Microsoft help files as well, but still can't seem to fix this problem.
I am having 2 tables. The first table is connected to a form for viewing and entering data, and in the second table i am just copying 3-4 fields from the first table.
I am trying to use the insert statement to insert records in the second table, and everytime i click on the "Add" button to add the records i get the following error "MS access can't append all the records in the append query ... blah blah blah"
However if i close the form and reopen it, and goto the record (as it is saved in the first database) and now click on the add button to add the fields to the second table/database, it works.
I'm looking for a keyboard shortcut to expand the columns in "design view" of a query.
What I mean by this is rather than selecting all of the columns and double clicking to see the entire text, I'd like to be able to a shortcut.
The entire process as I see it involves 3 steps so I will need thesolution to the 3rd step.
(1) [ctrl+spacebar] to select initial column (2) [shift+arrows] to select all of the columns I need (3) [keyboard shortcut] will expand all of the columns "field" names to the size of the column heading
Alternatively, if you know of a shortcut that will expand the columns without having to select them first I'll take it!!
I have set up a database that stores actions (i.e jobs). In the table; two of the fields are...'required completion date' and 'actual completion date'. I wish to lookup, by using a query, all of the open actions (those which havent yet been complete (i.e the 'actual completion date' is null)) and then later on all those which are overdue (i.e the 'actual completion date' is null And the 'required completion date' <today....this being the criteria for an overdue action).
However, I have used a form which has a combo box which contains the values open and overdue. When a selection has been made I want a form to display with the results depending on the selection that has been made. I am capable of creating a form based on a query, but am unsure of how to construct the query with the correct criteria based on the option that is selected from the form.
I have data for hundreds of stores. The data was pulled for the top 15 items by store, so I cannot obtain only the top 5 items that I need. How can I query this data to extract only the top (or bottom) 5 Subjects, by store, based on the percentage column?
I have a Form which I have linked correctly to a subform. The Text boxes are showing in the Design view but are not when one switches to the Form View. Labels for Fields are visible in the Form View. Have even created a new subform and that will also not display the Text Boxes.
Why the ability to view the properties of an object within a form is not available when you double click on it in design view?
I was happily working away double clicking on a command button to edit some code when for some reason the next time I tried to edit it did not open up for me.
I was unable to access it even by right clicking on the object & selecting properties as that also appears to be disabled, not greyed out or anything but just does nothing when selected.
Have I inadvertently changed a setting somewhere that prevents the properties from being displayed?
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
I have a table called NewTransactions_tbl that I have been using for some time. I am trying to add a new field called CustomerProjectNumber. It's not being displayed when I look at the table view. I've attached an image showing the settings for the field. I am probably missing something obvious.
I have 4 tables and around 440 records but can only view up to 417 in the form I have designed. I have been adding new records via form and it has been added to my main table, but when i try to view it in form view - the record is not available to view. What do I need to do to correct this problem?
I have checked that there are no filters, data entry is set to No, Auto deletions, additions and edits are set to yes.
Also to mention it seems that the problem has arisen since I set up some new queries, there is a one to one relationship between the tables!
I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.
I want to 'append' individual records from 2 tables and place in an archive table or within another database, whichever is the best option. I then want to be able to 'delete' the relevant records from one table.
The tables are tproperty and trents. This property paid rents but has since been sold. Therefore it no longer belongs in the database, however client wishes to keep details of the property/person/and rents paid in past, for any future ref. These tables are linked in relationships to tlessee and tbilling. I've read books/notes/looked on here for inspiration and the right direction! If I choose 'append' which seems pretty straight forward then a 'delete' query, how do I choose only one record? Is a make-table onto a different database a better option? It would appear that the whole table is copied over? Can't understand the issue about auto-numbers being copied over? Do I have to use an append/delete query for each individual property that's ever removed? I'm at a loss! :) Thanks
I have a database that contain foreclosure records. I'd like to create a query that will ask for a date and all records that are LESS than the date will be moved to a different table.
I'd also created an icon on my form and I'd like to attach this query to it.
Please how can i use a procedure to create a query, then append the content of the query to a table (am using MS Access Project)? i did it in Microsoft acess database but now i need it on Microsoft access Project beacuase am transfering to SQL server. Thanks
Now i want to create an append query that will add in table ZALGA fealds PROIZ_I, TIP_I, DN_I, KOS_A, KOS_I by critera if TIP_A = TIP_I AND DN_A = DN_I then calculate KOS_Z = KOS_I - KOS_A?
I am building a database to hold information of training courses and staff that have requested or completed the training course.
I have built a form which the team leaders can use to request training for their team, basically when the form opens up it asks for team name and training session and then appends the names and training session ID to the main table. This then allows the team leader to tick the "request training" tick box which updates the table for each member they request trainig for. They would then send this using a custom command button which is linked through outlook.
The problem I am encountering is that if they were to selct the same team and training session again it would then append the same data to the table and this would create duplicate entries.
How can I set it up so it appends only once and then any other time the same data is selected by team leaders it would populate the form with the existing date rather than appending the same data.
Dear all, I have a trouble to run the append query. It is failed due to the key violations. Could you please help me how to solve this problem? Many thanks. Bich