Visible Text
Feb 26, 2006
Hello. In my table there is a checkbox column. This box is checked on a form which feeds the table. I run reports from queries which contain both checked results as well as unchecked results. Is it possible for on the report, for the text (the field name, not the checkbox) to only appear when the box is checked? I hope I'm explaining this properly. I want the checkbox title to only appear on the report when the box is checked, otherwise I don't want it visible.
Thanks for your help.
View Replies
ADVERTISEMENT
Aug 18, 2005
got 2 radiobuttons and i want the text further down the page to show or not show depending on the value on the radio buttons.
I have tryed making an IF, but it doesnt want to update when i change post, or when i start the form, the radio button get the correct button according to the table but the text wont show any way untill i reclick the radiobutton.
dont know if u got what i ment but if u didnt ill try to explain it more.
View 8 Replies
View Related
Jul 31, 2005
I have a db I use for maintenance of equipment. I use a main form that has the equipment listed and a sub for for spare parts and linked by equip #. In the sub form I want to turn the visiblity of a specific text box turned on based on what is in a keyword textbox field in the sub form. What syntax would be the best to use and where do I put it. Have used if me.keyword = motor then me.hp.visible = true and also tried a case statement
View 6 Replies
View Related
Aug 27, 2006
Hi, I have a form with a INFO button, what I need is when the info button is pressed a text box becomes visible on the form and when pressed again the text box become not visible, this will allow the final user the have additional information regading compiling the form etc!
Thanks
Marco
View 5 Replies
View Related
Jan 19, 2006
on a report that has 2 pages, how can I make a text box in the bottom of the report page 1 invisible, but visible on page 2
you help will be much appreciated
Jabez
View 7 Replies
View Related
Sep 29, 2005
Hi,
Is it possible when choosing a combo box to have it make a text box visible, when in this text boxes properties you've chosen visible=NO. Can an event procedure or some code be written that will make visible=YES.
Thanks any help with be greatly appreciated
View 1 Replies
View Related
Oct 6, 2004
Hi Everyone, This should be quite easy,
I have 20 text boxes in a form
Dependent on the ammount of people attending [number in Group] text box
I am trying to make the same amont of [Client#] text boxes visible
The below coding works but i cannot go any further than 1 and 2 attending, As the if and else statement cannot be continued
Im sure there is an easy way to do this -
Private Sub C_AfterUpdate()
If [Number in Group].Value = 1 Then
[Client 1].Visible = True
[Client 2].Visible = False
[Client 3].Visible = False
[Client 4].Visible = False
[Client 5].Visible = False
[Client 6].Visible = False
[Client 7].Visible = False
[Client 8].Visible = False
[Client 9].Visible = False
[Client 10].Visible = False
[Client 11].Visible = False
[Client 12].Visible = False
[Client 13].Visible = False
[Client 14].Visible = False
[Client 15].Visible = False
[Client 16].Visible = False
[Client 17].Visible = False
[Client 18].Visible = False
[Client 19].Visible = False
[Client 20].Visible = False
Else
[Number in Group].Value = 2
[Client 1].Visible = True
[Client 2].Visible = True
[Client 3].Visible = False
[Client 4].Visible = False
[Client 5].Visible = False
[Client 6].Visible = False
[Client 7].Visible = False
[Client 8].Visible = False
[Client 9].Visible = False
[Client 10].Visible = False
[Client 11].Visible = False
[Client 12].Visible = False
[Client 13].Visible = False
[Client 14].Visible = False
[Client 15].Visible = False
[Client 16].Visible = False
[Client 17].Visible = False
[Client 18].Visible = False
[Client 19].Visible = False
[Client 20].Visible = False
End If
End Sub
Thank you. AM
View 3 Replies
View Related
Sep 30, 2005
Hi,
Is it possible when choosing a combo box to have it make a text box visible, when in this text boxes properties you've chosen visible=NO. Can an event procedure or some code be written that will make visible=YES.
Thanks any help with be greatly appreciated
View 1 Replies
View Related
Jun 12, 2014
I would like to have a checkbox be visible only if a textbox (Text246) has text in it.
Code:
Private Sub Text246_AfterUpdate()
Me.Check275.Visible = Text246
End Sub
View 2 Replies
View Related
Dec 31, 2013
I'm running Access 2003 and my question relates to delivery notes that are produced for drivers as reports. These delivery notes have a blank payment box for the driver to complete if the customer pays upon delivery.
As more and more customers are prepaying by credit cards, I'd like this payment box to be automatically filled with a "PAID" text which will let the driver know the order has already been paid for.
The delivery note is produced from an "Orders" table which has a "Paid" field whose value is automatically set to "Yes" when the order has been paid for.
I was hoping to be able to place a "PAID" label on the report which is only visible when the Paid field of the underlying query is Yes.
As things are at the moment I cannot see any way to put any conditional statement onto this Text/Label. The only options for the "Is Visible" property of the text are Yes or No.
View 4 Replies
View Related
Aug 29, 2012
When loading a form often some of the text is missing, headers are not there and/or the colours for the background are simple white, until I either resize the form or scroll up and down a few times.
View 1 Replies
View Related
Jul 27, 2014
I have a report that displays on a continuous style report. What courses the employee have been on and when they expire
right I have field call expirydate and another call dayover showing the number of days till that course has expired also I have made a label called Expired1
now what I'm trying to do.....
if the expirydate has passed I want the expired1 label to be visible and dayover field to become invisible
I have tried
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
If Me.Expirydate < Date Then
Me.expired1.Visible = True
Me.DaysOver.Visible = False
End If
If Me.Expirydate > Date Then
Me.expired1.Value = False
Me.DaysOver.Value = True
End If
I have also tried the code on current event on the report
now my problem if one of the course has expired it will show the label called Expired1 but on all the records but I only want it to display on the record that has expired and leave the daysover text box visible if course has not expired
View 7 Replies
View Related
Sep 23, 2004
On my switchboard form, I have a check box which the user can check to make a text box (which appears in several different reports) visible and uncheck to make it invisible. The text box in the reports has the same name on all of them.
I am having trouble making this work.
I can think of two solutions, but haven't had success with either yet.
1. I could simply change the visible property of the report(s) control from the form. This works if the report is open, but throws an error if the report is not open.
Code:Public Sub showNumOrgsInReportCB_AfterUpdate()If Me!showNumOrgsInReportCB.Value = 0 ThenReports![publishZipR]![numOrgsF].Visible = FalseElseReports![publishZipR]![numOrgsF].Visible = TrueEnd IfEnd Sub
Is there a property or function I can use to test whether the report is open before I set the text box visibility?
2. Alternatively, a less elegant solution would be to run an event procedure to close all open reports. This would eliminate that issue, but I haven't gotten the code to work yet:
Code:Public Sub showNumOrgsInReportCB_AfterUpdate() Dim rpt As Report ' Enumerate Reports collection.For Each rpt In ReportsDoCmd.Close rpt.nameNext rptEnd Sub
This line:
DoCmd.Close rpt.name
throws a Run-time Error '13', Type mismatch.
How do I fix that?
I'm open to better ideas!
Thanks
View 2 Replies
View Related
Oct 13, 2014
I have the code below and am trying to have a form allow Text Box to become visible based on selected items from a List box. Why I am getting the error listed?
Compile Error: Invalid Qualifier
Code:
Private Sub specific_opt_Click()
Dim users As Control
Dim ctrler As String
Dim xx As Long
If Me.specific_opt = True Then GoTo 169
[Code] ....
View 8 Replies
View Related
Aug 28, 2012
I have a combobox [CBreason] that reads from a table to show me why someone is gaining access to the building.
One of the options is "Incident".
When incident is selected I want a textbox [TBIncidentNo] and a button[BIncidentDup] control I made to appear.
I thought that the code:
If Me.CBReason.Value = "Incident" Then
Me.CBIncidentNo.Visible = True
Me.BIncidentDup.Visible = True
Else
Me.CBIncidentNo.Visible = False
Me.BIncidentDup.Visible = False
End If
Placed in the after update action of the CBReason box would sufice but it doesnt work
I'm guessing the value is not recognised fro some reason but i cant work out why. There is no error message or issus, it makes the box dissapear when there is no entry but no change for selecting incident.
View 3 Replies
View Related
May 3, 2006
Hi there,
I know there have been a good number of questions about visibility in forms already but I couldn't find a solution to my problem (or maybe I just didn't get it).
Basically, I have a tabular form (more than one record displayed at once) and one the field is of the Yes/No type. For each record, I'd like to have a text box that displays 'pending', set as visible if the field value is 'Yes' and set as invisible if the field value is 'No'.
The table is as follows:
id : auto-number
Flag: Yes/No [Yes]
If I use the following code on the Flag button:
Private Sub Flag_AfterUpdate()
Me.pending2.Visible = Me.Flag.Value
End Sub
all the 'pending' text boxes appear and disappear together (instead of just the relevant one).
I thought of using another text box, with the same data source ('Flag') but which would set itself to visible or invisible wrt to its own value but I couldn't find a way to do it.
Any suggestions ?
Thanks in advance !
and many thanks already for the forum and the contributions - it's been extremely helpful, esp. for a beginner.
View 2 Replies
View Related
Oct 17, 2013
I have a combobox on my form called TypeOfBusiness, with fields including Corporation, Education, Industry, Non-Profit. In order to make a second combobox called IndustryClassification appear when Industry is selected from the TypeOfBusiness combobox, I have used the following code:
Code:
Private Sub Form_Current()
If Me.TypeOfBusiness = "Industry" Then
Me.IndustryClassification.Visible = True
Else
Me.IndustryClassification.Visible = False
[Code] .....
It works just fine. However, when a user selects both, say, Industry and Education, the IndustryClassification combobox will not appear. What code I can use to ensure the IndustryClassification box will appear regardless if another box is checked in addition to Industry? I am wondering if it has to do with the Column attribute.
View 14 Replies
View Related
Mar 24, 2015
I have a Main Form with a Sub-Form, the sub-form is base off a query. on the sub-form i have 8 controls, one of them is "Status' and "Process" and "Review" My Main Form have a Refresh command that refreshes the data in the sub-form.
What i am trying to do is make the "Process" Control only visible is "Status" is a certain status and "Review" visible if "Status" is something else. what i have done works correctly On Open. I run into and issue on the refresh command. I get Run-time error '2165' "You can't hide a control that has the focus"
Code:
If Forms!Main_Form.[Name subform]!Status = "Ready" Then
Forms!Main_Form.[Name subform]!Process.Visible = True
Forms!Main_Form.[Name subform]!Review.Visible = False
ElseIf Forms!Main_Form.[Name subform]!Status = "Reviewing" Then
Forms!Main_Form.[Name subform]!Review.Visible = True
Forms!Main_Form.[Name subform]!Process.Visible = False
End If
I have done similar with a main form and making sub-form visible or not based on a control on a main form and that has worked perfectly. I am not sure how the control is getting focus and cause the error.
View 4 Replies
View Related
Sep 12, 2004
I have a form with four subforms set up in a tabs on the form. In the subforms I have a copuple of command buttons which enable/make visible fields when they are clicked (see previous posts but for eg) - if a height and a weight are added in two separate boxes a calculation is done and then a command button pressed to make visible the (label) which shows the mass index the patient falls into. My problem is that the label is then retained so if I click out of the form and re-enter with a new patient then the height and weight boxes are clear but the label from the previous patient remains.
I tried to put the code
Private Sub Form_Load()
If PtWeight = Null And PtHeight = Null And Text60 = Null Then
Label106.Visible = False
Label101.Visible = False
Label177.Visible = False
Label122.Visible = False
Label123.Visible = False
End If
End Sub
in both the open and on load event of the main form (not the subform) but it doesn't help. Any ideas?
(When should code be put on the main form and when on the subform?)
View 2 Replies
View Related
Dec 2, 2005
Hi,
On the form,
I have one field called "Tax", when I open the form, the "Tax" is invisible, when I click one button, then the "Tax" is visible, after the input the value, I want the "Tax" to be invisible. But it cannot be invisible.
Private Sub Tax AfterUpdate()
[Tax].Visible = False
End Sub
How can I fix it? Thanks.
View 7 Replies
View Related
Sep 7, 2005
This might sound simple to everyone, but it won't work for me. I have a text box on my form that holds the current date, there are also other text boxes that hold other information. Here's what I'm trying to do, if the other text boxes are empty then I want the date text box to be invisible. Here's the code I'm trying to use:
Code:If [EquipmentType1]=" " Then[DateSigned].visible = FalseEnd IfEnd Sub
By the way this is triggered from the Form Load event. Thanks for any help you can provide.
Scott
View 3 Replies
View Related
Apr 29, 2005
I created a little form containing informations the users need to see to insert the right values in other forms. I need to have this little form always visible even if the users are working with another form maximized.
Does it exist a code to do it?
View 4 Replies
View Related
Aug 16, 2005
In my form, I have a combo box with one of three options (cash, check, reimbursement). If the user chooses check, I want a text box to become visible, so the user may input the check number.
I thought I could use another invisible text box to store the value of the combo box and then in the code put:
Private Sub Text64_AfterUpdate()
If Text64 = "Check" Then
Me.Check1.Visible = True
Else
Me.Check1.Visible = Refresh
End If
Me.Refresh
End Sub
Text64 is holding the value of the combo box
Check1 is the text box where I want the user to put the check number.
Please help. Thanks
View 14 Replies
View Related
Aug 25, 2005
Hi could someone help me with the following please:
when a click on 'Button A' i want Button B, Button C and Button D (not yet visible) to appear. Then when i click on Button A again i want them to dissappear. Im sure this is easy!
Thanks
View 11 Replies
View Related
Mar 30, 2006
Simple but confusing.
I have a form with several controls. NAME, DOB and AGE.
NAME and DOB have a source to a table while AGE is unbound.
I would like a code that when opening the form, will show the age only if the DOB contains data.
Basically something like this:
If IsNull (Me!DOB) Then
Me.AGE = Null
Else
If Not Is Null (Me!DOB) Then
Me!Age.forecolor = VBWhite 'this hides the data)
End If
End If
Any help what I am doing wrong?
Thanks.
View 1 Replies
View Related
Jun 14, 2006
Hello,
I have a form with twa txtboxes named mytxt and txtresult.
The txtresult gets its data from a module (GetInterval).
I have written this statement:
If IsNull (Me.mytxt) then
Me.txtresult) = Null
I get an error as if that control cannot contain null values.
I have done the same with another sample, simply changing the record source of my txtresult to a field of my table and works?
can anyone see the problem?
I have also tried in with this code but still nothing:
If Len(Trim$(Me!USER & vbNullString)) = 0 Then
Thanks.
View 3 Replies
View Related
