I have a table -'client' with 5 fields,
id
name
address
email
mobile no
I want to see only those clients who has email id.
I know its simple but not so simple to a layman like me :)
Please help
I have a requirement to send a email to individual clients via my access database 2003 . I am using the email address of the client in the current open form . I then created a query using the id to filter that particular client, this query then becomes my record set.The content for the email is held in a .txt file , On my c drive . Every things appears fine however the fonts that I select in the .txt file are not being use in the actual email body. I created a word document with my preferred fonts and copied and pasted them into the .txt file but on sending the email the selected fonts do not appear.
I have attached a demo of what I am trying to do . To test enter your own email in the email address field of the form . Note the .txt file is on the C:/ drive.
I have a database with a list of clients, their enter and exit dates. I need to do a query that will count how many clients we have on a specific date. Keeping in mind that clients leave. I can do a query that will prompt user to enter a date. However, how would I count the total number of clients on that date? thanks a lot for any help!
View 3 Replies View RelatedHello, I am in the process of trying to get my database so i can access over the web.
Currently over the Lan I have the main database located on the server, and have created a replication for the two clients. This works over the lan where i can open the original and sync etc etc. How can i get this to work over the web so I have the same functionability as the lan method but over the web. I thought of some kind of interface but im not sure on how to do this.
Thanks in advance
Craig Clarke
Since I left school I have had to jump into application design on my own because I am finding it difficult to find work without 1 to 3 years of experience typically required by the current job market. This leaves me without any gut feeling for how to charge my customers. Charging by the hour is difficult to do fairly because I am not as efficient as more experienced programmers. Charging by the form, query, report, macro, or module, however, doesn't accurately capture the time variable associated with extensive scripting. Any guidelines offered in regards to charging and possibly ballpark rates would be hugely appreciated!!!
View 7 Replies View RelatedHi, based on previous advice I had merged my customers and owners into one table and selected whether a client was a customer, owner or both via a lookup table.
This is working fine, however I must assign a rep to each owner, I'm not quite sure how to do this, I need to be able to assign a rep to an owner in the clients table, I must also make sure than a rep can not be assigned to someone who is just a customer obviously.
I have attached the database (http://jonroberts.redirectme.net/database.zip), hopefully that will make things more clear.
Thanks in advance.
I have a table that contains clients. There are a few select times when there will be one client organization but I will need to have two entries--say when one department has a separate contact & record of events than another department.
In most cases these separate departments can be treated as entirely separate clients however in some ways they should be counted as one--such as when counting the number of clients that we serve.
What is the best way that I can accomplish this?
My current idea is that when this situation arrises I have some type of command button that will create a new client record in the table, copy the information from the first record, then I can change it as need be.
I don't know if this is possible, how to do it, and how to set up queries that will recognize the two entries as one record. I don't even know if this is the best way to do it
I need to create a report from a query. I have created the query that pulls the below data from the relevant tables:
ClientName;invoiceAmount;InvoiceDate
Using the wizard I have created a basic report that shows the information in the query, but I need it to list all clients and all months - even if some months show no invoices sent.
Ideally it would show as follows (with an option for the relevant year to display):
______ Jan Feb Mar Apr May Jun Jul Aug Sep Oct Dec
Client1
Client2
Client3
Client4
Do I need to create a separate tables for Month/Year and link these to the query? Or is there a simple function I can put into the query to achieve this? It seems a simple task, but after playing for a week I've got no where
I'm creating this database for a claims management company. Yesterday I learnt about making a many to one relationship between the claims and clients tables.
Turns out its more complicated than that. Since I'm dealing with claims, a person may add their partner as the second claimant. (usually the case in mortgages)
So where parties A and B are in a relationship:
person A may claim on their own
Person B may claim on their own
Person A may be the primary claimant and add person B
or conversely person B may be the primary claimant, adding person A.
The end goal is to automatically fill in a financial form (making use of a mail merge). So from what I know I think this means:
that grouping them as one contact is not going to work as I need them to be able to do a solo claim, and also I will not be able to easily change around who is the primary or secondary claimant, which will then carry over onto the mail merge.
So I think this means I need them as two separate contacts. However, I don't know how to create a link between them to easily add their partner to a claim.
Would this also mean I need a many to many relationship between clients and cases.
Hi all,I've been struggling with this for a few hours... I sure hope that the solution to my problem is complicated so I don't feel really dumb!I'm trying to design a database to eliminate the HOURS that my mom spends trying to format mailing labels in Word. She deals with about 50 clients at a time, and sometimes needs to print labels for just a selection of them, but not all. I'd like to design a form where she can select (using an option button or similar) the clients for whom she wants to print a label, and print them all at the same time (rather than printing one at a time, which I can handle on my own). Creating mailing labels will be the only function of the db so the info stored in it will be relatively simple.I have the Northwinds db installed, and I've found the sample Macro controlling the Where condition for the labels report. I understand how to make it work for a single selection from a combo box (ie: only print labels for customers from a specific country)I have my report set up so it shows a label for each client, pulling data directly from the main table. No troubles with formatting. **knocks on wood**My problems:1. I searched this site and found a link to the MS KB file that outlines how to print multiples of one label or skip used labels before starting to print (Q95806 - "How to Skip Used Mailing Labels and Print Duplicates"). I'd like to use this, but can't make it work.2. I can't figure out how to "link" the option button to the client name as it's listed in the form, and then tell the report to only print labels for the selected clients.I have very little coding experience but I can make some simple code work and am OK at customizing pre-written code to my own needs if it's well commented, so VB isn't entirely out as an option.I have a possible solution in mind that involves creating a query that makes a new table with only the selected clients, which is then used to make the labels report. I think I could make that work if I could just figure out how to select the clients in the first place.I apologize in advance if this has been taken care of elsewhere. I tried to find it, but had trouble coming up with the right search string!Thanks in advance,~ Mel ~p.s. I'm using Access 2000.
View 3 Replies View Relatedfind only some clients that has only 4 types of products, but no other type of products.
Just to put it in a much easier way to understand. If I have to find only the client that did buy only 1 or more from the 4 products. Fridge, tv, dvd player, mobile phone. But I'm not interested in the clients that also did buy for example, laptop, pc, video cameras, etc. So if the client has only one of the 4 products, I want to list them all, did they buy another type of product too, then not.
How could I create a query that will show me only those clients?
I am using Access 2010. I've calculated the age of clients by creating a new field with Age: Year(Now())-Year([D O B]) but I cannot figure out how to use a parameter query to return the age of the clients between age 20 and 30, 30 and 40, 40 and 50 etc.
View 14 Replies View RelatedI have a report that has multiple clients on each page. In the report, some clients have data for a specific date while others do not.
I would like to be able to Save As PDF each page to a specified folder but only if that client has data in the report. I am currently doing this in Excel, but would like to move my data and reports over to Access. My Excel VBA code is:
Sub SaveAsPDF()
Dim ws As Worksheet
For Each ws In Worksheets
If ws.Range("B66").Value <> "" And _
ws.Name <> "Notes" And _
ws.Name <> "Lookups" Then
[code]...
Which says if B66 is empty then don't Save As PDF. Is this possible to do in Access?I'm very new to Access and have never used VBA in it before.I would like to be able to create a button in a form that when I click it will run this code.
Ok, not sure if this is even possible or where to even start..
I've got a form that has all the info for a client, eg..
Client First Name
Client Last Name
Client Hours
Client WE/CS/EE
Client Day And Times
Client Phone
Client Comments
Begin Date & End Date (2 boxs) on there for date input..
and what i'm trying to do is limit that any date entered between begin date and end date, it'll check and make sure there is only ever 20 clients on any 1 day..
i thought Datediff would be the way to go, but then again how do you get it to search each day and make sure theres only 20 clients on there..
I am printing statements for clients. Depending on certain criteria about the client, the format of the statement changes completely. This is just how the boss wants it, I have no control. I still want to generate all statements at one time (not separate reports).
I currently have this working using multiple subreports, and changing their Visibility property, only one being visible at any one time. This works, but it is very slow, I assume because I am basically making Access do triple the work (I have 3 subreports).
I pretty confident this is not the intended use of subreports. Is there a "correct" way to do what I am doing? I know I could just manipulate everything with VBA, but having subreports makes editing the different formats very easy.
I have a Client database table in Access. I now need to add a simple order table (related) to the client table. I have a client ID field set to autonumber in the client table. As I start to create the orders table I'm not sure how to link the two so that I'm not entering data twice and have assurance that they are tied together.
View 4 Replies View RelatedI am trying to build a database for the handling of events for our clients. I therefore do have four tables named "Client", "Invitation", "Invitation status" and "Events". The table invitation includes an own primary key and the primary keys from the tables "Invitation", "Invitations status" and "Events" as so called secondary keys. I have now built an ongoing form, based on the "Client" table.
This form has a list field which includes the upcoming events. All our clients are listed below this form (as it is an ongoing form). After the name of the client I do have a drop down field calles "status" (source is the table "Invitation status" where we can remark if the client is invited, has confirmed his attend and so on.
The problem is now as follows: I am able to put in the status of a specific client for an event. The result is saved in the table as wanted. I am also able to change the status and this will be saved in the table as well. What doesn't work is that if I want to change the event, the status doesn't change. This means that if a client hast the status invited for event X he has the status for all events, which shouldn't be. The aim would be that if I am changing the event, the status also has to change.
I am running a report based on a query for a bunch of people who take medication. It runs the report and puts page numbers in the bottom right. Works perfect but I want it to do page numbers per person rather than the whole report. Is that possible to do or would I need to run some code to do them all individually?
View 1 Replies View RelatedI'm new to Access. It is obviously a very powerful database program I've developed a data base of my agency's service purchases for a variety of clients. I have to generate a report totaling the monthly purchases and counting the number of unduplicated clients. We make multiple purchases for clients monthly. There must be a feature on this program that will sort through the client ID Numbers and count them (rejecting duplicates) in that one month or quarter or year. I've been exporting to excel, sorting by client ID and then counting each new ID number.
View 2 Replies View RelatedWe have a split ACC2010 database, with the back end on our server and 5 front ends on 5 client PCs. I hadn't run a compact/repair on the back end for months. When today I tried, I got the 'database is locked' error. The lock file showed 'Admin' logged on at all 5 clients. The front-ends had been closed on all 5 clients. We do not have a user called 'Admin'. Because my issue occurs for all clients, it might be caused by some sort of programming error in the front end.A VBA bug (implicit comparison to a control in an If .. Then construct) caused this type of behaviour but was resolved in Access 2007.
View 12 Replies View RelatedVBA Code to go in the on double_click event of a name field in a Subform bound to a table. The subform is just a copy of a data table and within the subform view, When the field "employee name" which contains e.g. John is double clicked, I would like access to Lookup and get John's email in the employee table under field "Email" and launch outlook application and insert it into the To field.
I assume hyperlinking the field can also achieve this similar to what excel does but I am fast learning that what is standard functionality in excel is a whole another story in Access..
I have a query (Access 2007) that contains a field named "email" (which contains email addresses, of course). I want to email everyone in the query and they are all going to receive the same message. My email to them doesn't have to be personalized and I don't need to collect data from the recipients. I don't even need a reply to the email I send.
View 12 Replies View RelatedI have a form which has a button to email the data out in a standard email message.
Private Sub Command60_Click()
Dim MyDb As dao.Database
Dim rsEmail As dao.Recordset
Dim sToName As String
Dim sSubject As String
Dim sMessageBody As String
[code]...
This works well enough, however, FIELDS 11 through to 16 contain the venue address. This is all we ll and good if every field of the venue address is populated. here are times when not all of the fields are populated, for instance, the address might only be 5 lines.I know I can do this using IIf statements on a report, but how can i achieve the same thing for the email.
I have a database that I can use to create a query, grouping companies by city. I then want to send a specific email I have created in outlook to all of the email addresses in the query.I do not need to include names.
View 6 Replies View RelatedI have made a query with the name "Confirmation" and it is setup like this:
Name trainee Email Training
John John@mail.com Tr one
Mary Mary@mail.com Tr two
I also made a button in a report with the title "Send Mail" now is my goal that if i press that button automatically multiple e-mail message's will be generated with data from people in that query. So if click on that "Send Email" button i want two different mails messages generated that will be send to John@mail.com and Mary@mail.com with in the mail body their data.
I am currently using vb code to send an email in Access on the click of a button. I want the database user to be able to enter the recipient in a text box [ToEmail] which is on form [GroupStockProfiler]. However, I'm unsure how to put this into my code. I currently have the following which doesn't work (unless I put a specific email after 'To'):
Private Sub Command414_Click()
Const cdoSendUsingPickup = 1
Const cdoSendUsingPort = 2
Const cdoAnonymous = 0
[code]...