Recently
I have noticed that the "warnings" in my access 200o database no longer pop up. As example, if I went to delete a table or record, I used to get a pop up warning from MS Access asking for confirmation. Now the record just deletes without a warning. This seems to be happening with other things too.
Any thoughts ???
Thanks
Jackson:eek:
when i use an INSERT Sql function to update my database i get a popup warning telling me " You are about to append 1 row(s)".
Is there a way of bypassing this warning so the database is just updated no fuss ?
thanks in advance
john
When I open up my database i get a securoty warning that says
opening"filr name"
this file may not be safe if it contains code that was intended to harm your computer. would you like to continue?
Is there anyway of getting rid of that warning. It's not a huge deal but its one extra step at signing into our database.
Hi Guys,
I'm not sure this would be allowed as it could be maliciously abused, but what I want to do is turn of warnings when a user fires up my DB.
What currently happens is a user gets 3 pop up warnings in a row the first time they use the DB with essentially the same warnings and "do you want to run this" questions.
The next time the user runs the DB they only get one warning.
On another thread I was told how to turn warnings on and off within the database:
http://www.access-programmers.co.uk/forums/showthread.php?p=499732#post499732
'Turn warnings on & Hourglass on
DoCmd.SetWarnings False
DoCmd.Hourglass True
Code in routine that would generate warnings goes here.
'Turn warnings on & Hourglass off
DoCmd.SetWarnings True
DoCmd.Hourglass False
What I would like is some way to replicate the functionality for the DB. Is this possible?
Thanks in advance,
Keith.
I need to build a SQL statement (several actually) which will be appending/deleting/updating data.
I would prefer to turn off warnings so that I don't have to click on "Yes" 9 times per operation.
However, I don't want to just turn off warnings, as if a certain operation does anything but append/update/delete 1 record, I need to know. Is there a way to determine how many records are going to be appended/deleted/updated and if it's not 1, then run some other code?
Hello all
I just installed ofice 2003 and always get a warning message that some codes in my database might harm my aplication.
SECURITY WARNING: USAFE EXRESSIONS ARE NOT BLOCKED"
SAYING MICROSOT JET 4.0 SERVICE ARK OR LATER MUST BE INSTALLED.
How do i get this solved and what is the major advantage of access 2003 over 2002.?
Please help.
I thought I had this figured out, but apparently am still missing something...
When I start my DB, I get the default 'Security Warning' message every time asking if I want to cancel or continue... I thought this was an options setting under the Tools/Macro/Security setting. However, when I change this setting (default is Medium) to Low, exit Access and restart the DB I get the same warning message and the security setting is back to medium.
Am I in the right area to fix this? Why would my settings default back?
Thanks
I have a combobox, and the 'OnNotInList' event has code to show a message box, then set focus to another control. That all works fine, however I am still getting the system generated 'Not in List Warning', despite the code for the not in list event starting with DoCmd.Setwarnings (False)
How to disable the warning?
I have a button on a form that appends data to a table. When I click the button, I get 2 warnings:
1) "You are about to append 1 row"
2) "Microsoft Access can't append all the record in the append query."
I know I can use docmd.setwarnings = false then set back to true, but I'm only interested in suppressing the 1st warning, and I want the user to see the second warning.
Is there any way to suppress the 1st warning and display the 2nd?
I will be sending out copies of a program to several locations. Once I send the program I have absolutely no control over it. The FE file will always be in the same folder. The setup process creates C:MyFolder with the FE file in there. Is there a way to to programmatically disable the warnings throughout setup or to make C:MyFolder a trusted location?
View 3 Replies View RelatedHow can I suppress the warnings that Excel displays when saving the text file?
These are the messages displayed when saving the file as text:
"The file already exists. Do you want to replace the existing file?" RESPONSE: Yes
"myfile.xls may contain features not compatible with Text..." RESPONSE: Yes
These are the messages displayed when closing the file:
"Do you want to save the changes you made?" RESPONSE: Yes or No - can enter either as no further changes have been made
"The file already exists. Do you want to replace the existing file?" RESPONSE: Yes or No - can enter either as no further changes have been made
I am working in Access 2010. A bound combo box, Not In List event. I have the following code. It opens up a form to add the new name in. The form opens and then the "Not in List" message pops up. I have tried adding the SetWarnings to both forms, created a SetWarning macro, to no available. The message keeps popping up. My code is below. I know I need to set the warnings back to true - but for now, I just want to get rid of the message before sticking it back into the code.
Dim intAnswer As Integer
Dim strSQL As String
intAnswer = MsgBox("The acquirer/buyer " & Chr(34) & NewData & _
Chr(34) & " is not currently listed." & vbCrLf & _
"Would you like to add it to the list now?" _
, vbQuestion + vbYesNo, "Healthcare REIT")
[Code] ....
Hi all
I am trying to give a new user access to the front end of a DB.
When I copy the FE from the server to the local C drive ( Windows XP)
the FE loses all its relationships and the user is not able to query anything.
I go back to the server and find that the FE is just fine on the file server.
I also tried running the FE from my PC ( Windows 2000 SP4) and it works fine.
Do any of you know what the issue could be.
I also checked to see that the new user has permissions on the folder on which the file is located on the server and she does...
Any thoughts on what the problem could be would be highly appreciated.
Thanks.
Hi, I am new to access and I have found important tricks in this forum. Thanks to everybody
Now, I am trying to use a query with multiple criteria. In particular it has to query a table that contains info about candidates tblCands using text boxes, check boxes etc etc present in a form.
First, it works correctly but if I close the form and re-run it, statements in query disappear.
Could someone indicate me what would be the problem?
Thanks in advance
Well this is going to take a bit of explaining, because my colleagues and I are totally baffled.
I have an Access 2000 front end connected to a Sql production server. I went to make some changes to my forms and subforms, but I did not want to do it with the live data. So I made a copy of the database to my own Sql server on my desktop. So far so good . . . Now when I opened my main form, my subform appeared, but its controls were invisible--I still had not touched the code.
I looked at all the properties for my form and subforms and it is set to Visible and Display always. Now, even stranger, when I advanced my records, if the subform had data its controls would become visible, and then disappear again when I reached a record that had no data for the subform (the main form and the subform are bound to two seperate tables within my database, all the subform controls are bound as are the majority of the form's controls).
Then I went to the code. Nowhere do I change the Visible related properties within the form/subform code. I decided to put a Stop in the Form_Current code of the subform and see what happens as I advance from record to record. What happened was that when I reached a record with subform data present the stop would be read and I would toggle through the Form_Current code. When I would reach a record with no subform data, the Form_Current code would not be read as evidenced by there being no Stop action.
Anyone have an idea of what's going on? Something gets changed when I connect to my local SQL server. Even when I reconnect to the production server the problem remains. Its like some property changes, although I cannot find it, and it is changed permanently. The only property I play with by code is that I enable the controls of the subform when there is NO data in the subform, and I disable the controls when there is data. This code follows:
Private Sub Form_Current()
On Error GoTo Err_Form_Current
If Me!AssignedNumber = True Then
Me!AssignedNumber.Enabled = False
Me!txtWTNumber.Locked = True
Else
Me!AssignedNumber.Enabled = True
Me!txtWTNumber.Locked = False
End If
Exit_Form_Current:
Exit Sub
Err_Form_Current:
MsgBox Err.Description
Resume Exit_Form_Current
End Sub
Finally I tried to set Visible to true within my code for the individual controls, but that still did not overide the problem. I connect to my server via an ODBC connection to a .dsn.
Thanks in advance for bearing with me,
Tony
Sometimes when I send a copy of an Access 2003 application to a remote user, a stored procedure or function will disappear. What causes this, and how can I get the entire application over to the users?
Thanks in advance!
I use Access2007 under Windows 8.1 64 bits.Just ignore any message related to a splash form.The form will register revenues in the table TblLanc Receita sPJ. When either saving record input or closing the form, incomplete records must be eliminated from the table. When opening the form you should be able to see the unbound list of revenue inputs made. The list will show empty though because the last time I closed the form thru the button Close, table data disappears. Also, the same happens if I get into the form design mode to analyze the code and re-execute the form.
Please, click on the button Add to input a couple of revenue records thru the form to verify what I just said.I translated relevant input fields so the input should not be a problem. Fields named Quotation, Direct Purchase, and Contract, can be filled in with any data... just make sure only one of these fields per record be input, otherwise you'll get a pokayoke message. Save each input. After 2 or 3 record inputs, close the form and re-open it. Table will be empty. Redo and save new inputs. Go to the form design mode just because. Re-execute the form. Table will be empty again.
Another point is I want to click on a record of the unbound list and have the clicked record fields properly filled in the form. From that point I would decide if the record would be deleted or changed. The functionality of the entire code works but the selection on the list. In other words I do not understand why I am not able to fill in the form with the selected record fields. My code should do that but it does not.
Hi
I am using MS Access 2003. I would like to setup table link to sqlServer 2005.
sql server and access 2003 is in on the same pc. I have setup ODBC Data source to this sqlServer database. I tested the setup and it work fine.
Then I go to access and action; File/Get External Data/Link Tables.
On lick Link Tables, It open link popup windows. But when I select ODBC Databases() from the Files of Types dropdown, windows disappeared.
It doesn't open odbc datasource windows.
Please could you help to solve this problem.
many thank
hi all,
Is there a way to make message box disappear automatically after few seconds....
Thx,
Jatz
Hi,
My property sheet has disappeared I don't know what I did. How can I make it reappears? I have try by pressing the SHFIT key but it won't work. Also, I have created a new database and open it, the property sheet isn't appeared. The icon are still there but when I press on it, it does not response.
Thanks,
Le
Hello Access experts,
I am using MSAccess 2002. I have removed the tables and queries to reduce file size. I have set database password as "planning". In the form named "Form1" I have created a Shift-Key Enable/Disable button with password "SIMON". In Menu Starup, I have also disallowed Display Database Window, disallowed Built-in Toolbars and disallowed Toolbar/Menu Changes. Now I have problem because I cant unset the Security password and make changes in Startup.. because the Menu Tool/Security, Startup..etc have disappeared. How do I get them back again?
Thanks in advance.
hey, i hav seen a similar thread about this (i think bout a year ago or so) and i didnt no whether to continue it or start a new thread.Option boxes - Making items visible
that thread did not fully answer my question and after searchin around n finding nuthin i hav decided to ask
in my form i have the payment methods=> cash, cheque, credit. i did have these in a drop down menu, but i wasnt sure how to do what i wanted...which is based on the selection either make a couple of fields (credit card details etc) visible or invisible. so what i have done is changed the drop down list into an option group with radio buttons.
i currently have this coding
Code:Private Sub Frame_Click()If Me.Frame.Value = 3 ThenMe.CardHolder_Name.Visible = TrueMe.Credit_Card_Number.Visible = TrueMe.Expiry_Date.Visible = TrueMe.Type.Visible = TrueElseIf Me.Frame.Value = 2 ThenMe.CardHolder_Name.Visible = FalseMe.Credit_Card_Number.Visible = FalseMe.Expiry_Date.Visible = FalseMe.Type.Visible = FalseElseIf Me.Frame.Value = 1 ThenMe.CardHolder_Name.Visible = FalseMe.Credit_Card_Number.Visible = FalseMe.Expiry_Date.Visible = FalseMe.Type.Visible = FalseExit SubEnd IfEnd Sub
this seems to work although say if my first record has credit card selected, then all the fields are visible, but wen i move onto the next record which is cash or cheque...they are still visible until i reselect cash or credit again..(and vice versa)
i hope this makes sense :P
thanks
In a report there is a text box that disappears if certain data appears in a record. It is supposed to disappear but I cannot determine why it is disappearing and I need to fix the criteria that make it disappear.
The text box is unbound (the control source is ="Bonus Point Legend"), and there is not any code that refers to it, nor are there any references to it in a query (I can delete the text box and the report runs just fine). Interestingly, if I add a new text box and use the paint brush to format it based off the one in question, it also disappears and acts just like the one in question. But I can't find any code that even references a generic control and makes it invisible. The tag field is not in use either.
I have a query that's been working fine for years, however...the powers that be have requested a change. We need to track the lining owners in cars. We've recently gone to SQL on the back end (which I basically know NOTHING about) but I set up the new table, refreshed the connection, etc.
I can see the table fine and it says it has a primary key, auto numbers, etc. however, as you can see from the jpg below when I add the table to the query and link the id as in all the other tables, for some reason, this one makes all the data disappear when in datasheet view.If I delete the table from the query - it all comes back.
I seem to be having an issue with a split form I've been working on. I created this split form on Monday and it was working just fine but today, I have added a couple minor text boxes. Since then, I can view the form contents in Design View but when I switch to "Form View" or "Layout View", it's all gone minus the logo in the top left corner and the title for the split form.
View 12 Replies View RelatedI've created a database with multiple subforms within the form; however some of the subforms randomly appear and disappear for no apparent reason.
View 2 Replies View Related