I have been writing databases for several years now, so I know my way around access pretty good. I have come upon a strange error though. which is confusing me to now end. I wrote a Database on my work machine which has the latest version of MS Access and SP2 for Office. I just tried to send it to another employee for them to test. Now they do not have the full version of MS Access installed on their machine, they only have the runtime version which only runs the Database. The load works fine and the first screen uses ADO to lookup some value and display them in a list box, nothing crazy, everything works fine. Now using this form, when they click a button the info in the list box is used to set the Fields a new Unbound form. And this is where the error happens. The on_load event of the form fails for some reason, and gives a msgbox which says, "Runtime error occured and the App needs to close", but the prog works fine on my machine. I am baffled. The file is a MS Access 2000 format, I tried changing it to MS Access 2002/2003 Format, and when I do that they cannot open the file because it says they do not have thje latest MS Access version. I have no idea what, why the error occurs, any ideas??
I am coding an ASP front end for an Access database. I actually had it working yesterday but I still had some tweaks to make. My development has come to a stand still because of this crazy error I awoke to this morning. I went to the url of my ASP page and all of a sudden I get this error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xbac Thread 0xc84 DBC 0x19e6fc4 Jet'.
So after doing some research, I decided to change my connection string to use Provider=Microsoft.Jet.OLEDB.4.0
Once I changed over to the Jet driver, I got this error message:
Microsoft JET Database Engine error '80004005'
Could not find installable ISAM.
I am totally stumped with this problem. I actually re-upped the database and it started working briefly but the error message soon returned. Everything I am reading is saying to change permisions and change some stuff in the registry but since it was working fine yesterday, I do not believe it is a registry setting.
We are currently using Access 2007 and I've got a database that sends emails out to multiple users depending on the data that was entered. We are about to upgrade to Access 2010 and I am testing it now. I was originally getting runtime error '287' when I was adding addresses to a Recipient object. I got past that by adding the addresses in a string and concatenating. Now I'm getting the error with .Send.
WindowsNT 4.0 Service Pack 6 error in access runtime install I have an access runtime install package that has worked numerous times installing on XP Home. It was built using Office XP developer's packaging wizard.
I tried installing it on a brand new PC running XP Home but it generates the error: Visual Basic 6.0 Setup Toolkit The office system pack cannot be installed on this system because it requires Windows NT 4.0 Service Pack 6 or later.
I have setup a small application with front/back end in local network. On client machines i have installed access runtime. Although it works fine but it suddenly quit when there is any run time error while working on client machine. Although on server machine ( where full version is running it didn't close the application ).
What i need is an option to not quit the application completely. As i am not expert in coding of try/catch statements I need a simple solution for time being .
I'm using Access 2010 and I want to export a query to Excel by clicking a button. Every time I click on it Excel opens but doesn't open my worksheet, it's just gray like you just open the program without a table. After exiting it Access tells me I got a run time error 1004: the open-method of the workbook object couldn't be executed. After opening my Excel file it says that Excel found unreadable content and asks if I want to restore the content of the workbook.
Here is my code:
Code: Private Sub Befehl62_Click() Dim cdb As DAO.Database, qdf As DAO.QueryDef, SheetName As String, xlApp As Object Set cdb = CurrentDb Forms!Export_to_Excel!txtSheetName.SetFocus SheetName = Me!txtSheetName.Text
I have a access program and recently I began getting this Error out of the blue . I really need to fix this error because it shuts down my entire program . When I go to save a pic like i always do and it will not recognize the "quote Main ".
I am creating a switchboard to access a few data entry forms and to preview reports before printing. It seems that whenever I add a button to preview a certain form(the 4th button on the form, all others work fine), Access goes crazy. I get several errors, including:
"You have entered an expression that has an invalid reference to the propery MaxRecButton. "
and
"The Open Form action has been canceled"
Im also getting crashes to desktop and low memory errors.
Now I am getting "referenced memory" "memory could not be wrriten" errors? Is this an Access problem or a "need a computer upgrade" error?
Any clue why this might be happening for this form?
I've encountered another weird error when applying an append query through a button. Here's the code:
Private Sub cmdSaveChanges_Click()
On Error GoTo Err_cmdSaveChanges_Click 'Saves the new Inspector information into the information table. 'Adds the two references created by adding a new inspector into the XREF_FILE_INSPECTOR table. 'This is the case that the references are formed by adding a completely new inspector. If (IsNull(cmbInspector) Or Me.cmbInspector = "") Then
Else 'This is the case where the user chooses an inspector from the provided combo box. DoCmd.RunSQL "INSERT INTO XREF_FILE_INSPECTOR " _ & "(FILE_NUMBER_CD, INSPECTOR_NUMBER_CD) VALUES " _ & "(" & [Forms]![GeneralFile].[txtGeneralFileNumber] & "," & cmbInspector.Column(0) & " );" End If Exit_cmdSaveChanges_Click: Exit Sub
Err_cmdSaveChanges_Click: MsgBox Err.Description Resume Exit_cmdSaveChanges_Click End Sub
The problem is, when I run this I get a "Syntax error in INSERT INTO statement". This seems to only be the case for the first part of the IF statement, as the second part's append query works fine.
So now, I'm using the code below to prevent duplicate name entry and it is working great - EXCEPT when I enter a first or last name which contains a ' (ie, O'Tool, O'Malley, O'Hern)...anyone got any ideas for me on how to make this not happen?
The error I get is:
Run Time error '3075'
Syntax error (missing operator) in query expression '[Last Name]='O'Hern' And [First Name]='Lori'.
The code i'm using is:
Private Sub Last_Name_AfterUpdate()
'Check for duplicate first and last name using DCount
If DCount("*", "[Constituents]", "[Last Name]= '" & Me![Last Name] & "' And [First Name] = '" & Me![First Name] & "'") > 0 Then Beep MsgBox "This first and last name already exists in the database. Please check that you are not entering a duplicate constituent before continuing.", vbOKOnly, "Duplicate Value" Cancel = True End If
Not sure how to work in the '* ROLL *' into this SQL statement. The query statement works fine ... I have tried different quotation methods ( Not Like " & " ' * ROLL * & ' " & " ) AND .... )
sql = "SELECT DISTINCTROW Sum(CDbl([Scrap Factor])) AS SumOFScrap FROM [RT: Signpro1: Costs] LEFT JOIN [DT: InventoryExtend] ON [RT: Signpro1: Costs].[Part Number] = [DT: InventoryExtend].[Part#] GROUP BY [DT: InventoryExtend].CategoryID, [DT: InventoryExtend].Description, [forms]![signpro sign estima parameters]![combo14] HAVING ((([DT: InventoryExtend].CategoryID)=30) AND (([DT: InventoryExtend].Description) Not Like '* ROLL *') AND (([forms]![signpro sign estima parameters]![combo14])=1));"
Ive created a database using the file system object that creates folders, moves files from one folder to another, etc.
This works perfectly on my home pc, but when i try to install it on the server at work I get the following error message:-
Runtime Error 429
Active X component can't create object
I've had a look on the net and appears that it only happens on certain computers and I wondered if anyone had any quick fixes that they had come across over the years.
I have this error when on: DoCmd.GoToRecord acDataForm, "PaycheckTable", acNewRec Whent I trace with the debugger when the ENTER keyy is pressed event.
If I don't use the debugger I don't see any error. This problem occurs when I check a specific checkbox and trying to go to a new record (Whith the other checkboxes I don't have a problem).
Another symotom: When I use the next or new record buttons I don't have any problem.
Using Access 2003 and Word 2003 on a WinXp Workstation with all SPs and updates.
The code that I'm using is MS standard (see below) and has never previously given me any problems albeit using Access 2000 and Word 2000.
I've searched the MS knowledge base and googled the error but nothing I find seems to relevant to this situation.
It falls over on the '.Destination = wdSendToNewDocument' line.
Can someone help?
TIA,
Mo
--------Code----------
DoCmd.Hourglass True
If CreateWordObj() Then With gobjWord .Visible = True .Documents.Open "d:screening emplate.doc" DoEvents With gobjWord.ActiveDocument.MailMerge .Destination = wdSendToNewDocument .SuppressBlankLines = True .Execute End With '.ActiveDocument.PrintPreview .Visible = True End With End If
I created a database for someone at work, with the main point of it being for someone to enter a date in one field, and then 13 weeks from that date, it ticks a box, and then 26 weeks from the date inputted, it ticks another box.
Now, all was working fine, but today she came to me and showed me an error that keeps appearing.
What happens is when she creates a new record on the form, if she doesn't input either a date (so the above formula can work), or the persons name in the appropriate field, a Runtime Error 94 appears, which I think says 'Invalid Use of Null', or something along them lines.
I've looked at the coding, and am a bit stuck (bare in mind I don't know a great deal about coding).
From memory, in the coding, the database looks at the date inputted, then adds 13 or 23 weeks to the date, and ticks when it gets to that point. However, if this date isn't inputted, that is when the run time error appears. I have no idea at all why this happens when the name isn't inputted.
If it's any help at all, the bit that is highlighted in yellow in VB, when I click debug, is as follows:
dStart = Me.txtStartDate
Underneath this it has the formula that adds 13 weeks to that date, and then the same but for 26 weeks.
I'm guessing I need to tell it that when there is nothing inputted in the date field, it doesn't have to do the formula. It doesn't like having nothing in the date field.
Apologies if that makes no sense.
If anyone at all can help, it would be much appreciated.
Why does the following code generate an error. All i want to do is open a recordset which I thought would be straightforward. (novice Programmer, new to access vba). The set statement in the ComboProduct event generates the error.
Option Compare Database Dim Company As String Private dbaProposal As DAO.Database Dim EffectiveDate As Date Dim Product As String Private rstProposal As DAO.Recordset
Private Sub ComboProduct_AfterUpdate() Product = ComboProduct.Value Set rstProposal = dbsProposal.OpenRecordset("SELECT * FROM Proposals WHERE Proposals.[Group Name]='" & Company & "' AND Proposals.[Effective Date]=#" & EffectiveDate & "# AND Proposals.Product='" & Product & "'") End Sub
Private Sub Form_Load() Set dbsProposal = DBEngine.OpenDatabase("Database1.accdb") End Sub
That error keeps on appearing in my application and no way to sort it out...
The error is the following: Runtime error 3734: the database has been placed in state by user 'Admin' on machine ... that prevents it from being opened or blocked.
I tried to sort it out by doing:
set db= opendatabase(database,0)
but still appearing the message.
could i solve it by checking if there is an actual opened connection before starting a new one? and in case that that there is an opened one, close that.
Hello Access friends, What is wrong with the following code (modified the module from http://members.iinet.net.au/~allenbrowne/AppInventory.html ): I Keep getting a runtime error 3061 Too few parameters . Expected 1 on the line highlight below. I have the reference MS DAO 3.6 selected and I am using access 2000 and calling the module from a command button in a form. Thanks in advance for taking the time to help me out.
Dim db As DAO.Database 'CurrentDb() Dim rs As DAO.Recordset 'Various recordsets. Dim strProduct As String 'vProductID as a string. Dim strAsOf As String 'vAsOfDate as a string. Dim strSTDateLast As String 'Last Stock Take Date as a string. Dim strDateClause As String 'Date clause to use in SQL statement. Dim strSQL As String 'SQL statement. Dim lngQtyLast As Long 'Quantity at last transaction. Dim lngQtyAcq As Long 'Quantity acquired since incoming transaction. Dim lngQtyUsed As Long 'Quantity used since outgoing transaction.
If Not IsNull(vProductID) Then 'Initialize: Validate and convert parameters. Set db = CurrentDb() strProduct = vProductID If IsDate(vAsOfDate) Then strAsOf = "#" & Format$(vAsOfDate, "mm/dd/yyyy") & "#" End If
'Get the last transaction date and quantity for this product. If Len(strAsOf) > 0 Then strDateClause = " AND ([TransacDate] <= " & strAsOf & ")" End If strSQL = "SELECT TOP 1 [TransacDate], [Quantity] FROM [Transactions] " & _ "WHERE ((ProductID = " & strProduct & ")" & strDateClause & _ ") ORDER BY TransacDate DESC;"
Set rs = db.OpenRecordset(strSQL) With rs If .RecordCount > 0 Then strSTDateLast = "#" & Format$(![TransacDate], "mm/dd/yyyy") & "#" lngQtyLast = Nz(!Quantity, 0) End If End With rs.Close
'Build the Date clause If Len(strSTDateLast) > 0 Then If Len(strAsOf) > 0 Then strDateClause = " Between " & strSTDateLast & " And " & strAsOf Else strDateClause = " >= " & strSTDateLast End If Else If Len(strAsOf) > 0 Then strDateClause = " <= " & strAsOf Else strDateClause = vbNullString End If End If
'Get the quantity acquired since then. strSQL = "SELECT Sum([Transactions].[Quantity]) AS QuantityAcq " & _ "FROM [Transactions]" & _ "WHERE (([Transactions].[ProductID] = " & strProduct & ") AND ([Transactions].[TransacType] = 'Incoming')" If Len(strDateClause) = 0 Then strSQL = strSQL & ");" Else strSQL = strSQL & " AND ([Transactions].[TransacDate] " & strDateClause & "));" End If
Set rs = db.OpenRecordset(strSQL) If rs.RecordCount > 0 Then lngQtyAcq = Nz(rs!QuantityAcq, 0) End If rs.Close
'Get the quantity used since then. strSQL = "SELECT Sum([Transactions].[Quantity]) AS QuantityUsed " & _ "FROM [Transactions]" & _ "WHERE (([Transactions].[ProductID] = " & strProduct & ") AND ([Transactions].[TransacType] = 'Outgoing')" If Len(strDateClause) = 0 Then strSQL = strSQL & ");" Else strSQL = strSQL & " AND ([Transactions].[TransacDate] " & strDateClause & "));" End If
Set rs = db.OpenRecordset(strSQL) If rs.RecordCount > 0 Then lngQtyUsed = Nz(rs!QuantityUsed, 0) End If rs.Close
'Assign the return value OnHand = lngQtyLast + lngQtyAcq - lngQtyUsed End If
Set rs = Nothing Set db = Nothing Exit Function End Function
