Hello
Any hellp would be appericated.
I have a pass thorugh query that connets to a Oracle database with a where clause with a between start date and end date.
I need the start date and End Date to come from a form within MS Access.
Is this possible? if so how do I code the where clause to get the start and end date parameters from the form?
Hi ,
I need to make a Training Management System as directed by my Boss urgently
Well the problem i m facing is When i update the value in text boxes/Combobox of a form and click 'Display Results' Button to display the results of a query based on Text boxes/Combo-box values, it gives me nothing.
Query is perfectly correct, i checked it. I dont know why it is not picking the updated values of textboxes/combobox on the form.
I am not using any kind of programming/ code in this Project.
I am using only Accesss nothing else even not VBA, dont have licence of SQL Server etc.
Hi ,
I need to make a Training Management System as directed by my Boss urgently
Well the problem i m facing is When i update the value in text boxes/Combobox of a form and click 'Display Results' Button to display the results of a query based on Text boxes/Combo-box values, it gives me nothing.
Query is perfectly correct, i checked it. I dont know why it is not picking the updated values of textboxes/combobox on the form.
I am not using any kind of programming/ code in this Project.
I am using only Accesss nothing else even not VBA, dont have licence of SQL Server etc.
Hi ,
I need to make a Training Management System as directed by my Boss urgently
Well the problem i m facing is When i update the value in text boxes/Combobox of a form and click 'Display Results' Button to display the results of a query based on Text boxes/Combo-box values, it gives me nothing.
Query is perfectly correct, i checked it. I dont know why it is not picking the updated values of textboxes/combobox on the form.
I am not using any kind of programming/ code in this Project.
I am using only Accesss nothing else even not VBA, dont have licence of SQL Server etc.
Good afternoon, I have a form with a subform and in the first txtbox of the subform in the GotFocus event I have a little procedure which checks the txtboxs on the parent to make sure that there is data in all four of the txtboxes. This works great the first time and it pops up a msgbox and it even setsfocus on the txtbox with no data in it, but if I tab into the subform a second time and there still is no data in one of the txtboxs on the parent form, nothing happens, no message and no setting focus on the txtbox with no data in it. Does anyone know of a way to get this procedure to re-set everytime a user tries to enter the subform? Thank you in advance to anyone offering and ideas and suggestions.
View 8 Replies View RelatedI am really stuck. I have spent two days searcinh different forums trying to solve my problem. I am trying to create an UPDATE q to my Access database. But I get either the: "Syntax error in query. Incomplete query clause" or "Syntax error in UPDATE query".
First of all here's the URL: www.innotec-as.no/login/Kunder
Login U/P either: "alfen" or "thomas".
The page opening up shows the user info, U/P and adress.
viewing the information is working perfectly - but editing it..no way.
When editing and submiting the data the above errors occour.
Try that and you'll also see the SQL I am trying to execute.
The CODE is as follows:
SQLtemp = "UPDATE 'Brukere' SET"
SQLtemp = SQLtemp & " 'navn' = '" & request("Navn") & "', "
SQLtemp = SQLtemp & " 'epst' = '" & request("Epst") & "', "
SQLtemp = SQLtemp & " 'Pass' = '" & request("Pass") & "', "
SQLtemp = SQLtemp & " 'Firma' = '" & request("Firma") & "', "
SQLtemp = SQLtemp & " 'BAdresse' = '" & request("BAdresse") & "', "
SQLtemp = SQLtemp & " 'BPostAdr' = '" & request("BPostAdr") & "', "
SQLtemp = SQLtemp & " 'PAdresse' = '" & request("PAdresse") & "', "
SQLtemp = SQLtemp & " 'PPostAdr' = '" & request("PPostAdr") & "', "
SQLtemp = SQLtemp & "WHERE 'Bnavn' = '" & request("Bnavn") & "'"
Response.Write(SQLtemp)
Response.End()
conn.Execute(SQLtemp)
rs.Update[/COLOR]
The finished SQL statement looks like this:
UPDATE 'Brukere' SET 'navn' = 'Alf Byman', 'epst' = 'alf@baccara.no', 'Pass' = 'alfen', 'Firma' = '', 'BAdresse' = '', 'BPostAdr' = '', 'PAdresse' = 'sdfg', 'PPostAdr' = '', WHERE 'Bnavn' = 'alfen'
I have tried to user single quotes, doubble quotes, brackets etc. nothing works.
The code I use for connection is as follows:
<!--#include file="../adovbs.inc"-->
<%
dim conn, rs, SQLtemp
' DSNless connection to Access Database
set conn = server.CreateObject ("ADODB.Connection")
rs="DRIVER={Microsoft Access Driver (*.mdb)}; "
rs=rs & "PWD=uralfjellet; DBQ=" & server.mappath("../../../../db/kunder.mdb")
conn.Open rs
I'll be very HAPPY for some expert help on this.
I need to append data from Table 2 into Table 1 where the Name and RefID fields in Table 2 have different values to the same fields in Table 1.
Does this make sense?
Ok, more clarification. I have a load of employees in a table (Table 1) They have the fields UniqueID, RefID, and Name. All links go through UniqueID, the name field has duplicates, and the RefID is the internal employee number and can be null where the 'employee' is a contractor.
Now, I have been handed an updated copy of that table (Table 2) in a spreadsheet. I need to load in all the records that are new in the spreadsheet to Table 1. The awkward part is that there is no uniqueID in Table 2. I cannot delete and reload all because i need to retain the original UniqueIDs in table 1 as they have linked data based on those IDs.
Can someone tell me how I can identify the new records in table 2 and then upload them to table 1.
Cheers guys and girls
Morning all,
Am trying to create a really simple form where the user can select one of five fields, an operator (just =, Not, <, and >) and the values are pulled from whatever field is chosen.
I have the form down and can populate the values list based on the field however now i need to use the values in these boxes to create a WHERE clause.
I'm really new to SQL and have only done a couple of online tutorials but i think im on the right lines?
DoCmd.RunSQL "SELECT * FROM qryLinkMasterPrimary WHERE " + cboFields.Value + " " + cboOperator.Value + " " + cboValues.Value
Is this even slightly close? I've tried searching the internet and everything i find is waaaaay too complicated for me to get my head round.
Any help is greatly appreciated
Mike Harkess
I have a TRANSFORMED query:
Code:
TRANSFORM nz(count(T_qa.qaQAPK),0) AS SumOfQAs
SELECT month(qaDate) AS QAmonth, Count(T_qa.qaQAPK) AS QAs
FROM Q_ALL_qa
GROUP BY Month(qaDate)
PIVOT month([qaDate])
IN (1,2,3,4,5,6,7,8,9,10,11,12);
This query is record source for a report, then this report show all calculations in a form.
I have 7 of each (query + report) all showing on the same form.
All those queries calculate data for all departments.
In the form, I have placed a combobox.
What I want is to create a vba code which will add clause WHERE to all queries at the same time and then run it.
Code:
WHERE qaDeptFK=Forms!F_CompLvl.cboDeptStats
However, if nothing has been selected in the combo, I want the queries to calculate data as normal, for all departments.
Where do I place the vba statement? Is it under combobox AfterUpdate event?
I am planning to use this: (As I never done it before)
[URL] ....
Modifying SQL On-The-Fly section
I understand I cannot easily run a SELECT * WHERE ... query in VBA ?
I want to run a simple Select query but use variables from the Form vba for the WHERE clause selections.
I have this code below which pulls a report based on the current date, I wanted to be able to pull the same report by entering between 2 dates as is done in a query using parameters.
Code:
reworkWhere = "ReworkTech = '" & Me.txt_tech_by_date_techid & "' And ReworkTimeOut = Date()"
repairWhere = "RepairTech = '" & Me.txt_tech_by_date_techid & "' And RepairTimeOut = Date()"
qcWhere = "QC_Tech = '" & Me.txt_tech_by_date_techid & "' And QC_TimeOut = Date()"
strWhere = reworkWhere & " Or " & repairWhere & " Or " & qcWhere
DoCmd.OpenReport "RPT_RF_TECH_REPORT_UNIT_DAILY", acViewReport, , strWhere
How to make a combo box with the months listed so they can pull this report by the month selected but is a side tangent.
I have a Report that uses a query as it's record source. I have the query ordered by a field, which works as expected in the table view of the query. In the report, however, the ORDER BY clause does not seem to carry through. The field is not sorted Ascending. What's going on?
View 5 Replies View RelatedI have a date field NxtAPayDate that I need to update to the same day in the next calendar quarter. I have an update query set up using DATEADD but it does not change the dates. The table name is AutoPay
I am using the Query Design Grid. This is the SQL code behind the query:
UPDATE AutoPay SET AutoPay.NxtAPayDate = DateAdd("q",1,[AutoPay]![NxtAPayDate]);
When I view the results the dates are the same - original dates, when I try to sort the results, I get a message box with the following: syntax error, incomplete query clause?
I cannot get the dates to change by using a specific date either
UPDATE AutoPay SET AutoPay.NxtAPayDate = #1/2/2014#;
how I can achieve this in Access
I have a table created in Access- "Master"
FileName Sortorder
ABC_..........4
CDE_..........2
EFG.ss1.......1
GHI.srs........3
I have a Query created in Access whose output is
FileName RowCount Exception RunDate
ABC_20141117.....10...........5........11/17/2014
CDE_11172014......23.........10.......11/17/2014
EFG.ss1................55..........0........11/17/2014
GHI.srs.................15..........5........11/17/2014
Now I require to join these both, the table and the output of the query on the condition where query.fileName like table.fileName.
There is no key in this field. Why I need this because the table has the sort order which the user can change when needed, if I put the sort order in the query then each time there is a change then the query needs to updated which the user can go wrong. Also the filename in the query has date associated which changes every day so I need to pick the unique part of the file name and associate it with the query to get the output from query and sort order from the table.
Required Output:
FileName RowCount Exception RunDate SortOrder
EFG.ss1...............55............0.......11/17/2014...........1
CDE_11172014.....23...........10......11/17/2014......... 2
GHI.srs................15............5.......11/17/2014..........3
ABC_20141117.......10...........5......11/17/2014..........4
I'm trying to create a PTQ and just cant seem to find the source table.
The name of the source table is PRM1_ORG_MTRX3_N
If I write my query like this, I get an error code that states username.PRM1_ORG_MTRX3_N is an undefined name. It adds my userid to the beginning of the table name.
SELECT
T128.AS_OF_DATE,
T128.LEVEL8,
T128.LEVEL8_ORG_NAME,
T128.LEVEL9,
T128.LEVEL9_ORG_NAME
FROM
PRM1_ORG_MTRX3_N as T128
WHERE
T128.AS_OF_DATE like '1/1/2007'
Then I rewrote the query like this, and I got and error code that said PRM1.ORG_MTRX3_N is an undefined name. Does anyone know what else I can try here to get this query going? Thanks
SELECT
T128.AS_OF_DATE,
T128.LEVEL8,
T128.LEVEL8_ORG_NAME,
T128.LEVEL9,
T128.LEVEL9_ORG_NAME
FROM
PRM1.ORG_MTRX3_N as T128
WHERE
T128.AS_OF_DATE like '1/1/2007'
Can you do a pass through Query to a pivot table when your query has parameters? I'm reading like you can't, but nothing has been said concretely yet. When I do it, it gives me an error "Trouble Obtaining Data" when I try and set the layout.
View 1 Replies View RelatedCan anybody help me understand why I get the error
"Syntax error in CONSTRAINT clause"?
I get it in Access 2003 and Access 2007.
Both are clean installs with no add-ins
Running this code in VBA, or pasting the SQL directly in a query results in the same error.
Sub test()
sTableName = "Test"
sSQL = "CREATE TABLE " & sTableName & "_Config (" _
& "[idConfig] Int Primary Key," _
& "[Config] Memo," _
& "[Instrument] int," _
& "[Serial_No] Text(25)," _
& "[Firmware] int," _
& "[Orientation] int," _
& "[Sensors] int," _
& "[Sensor_Size] float," _
& "[Sensor_1_Distance] float)"
DoCmd.RunSQL sSQL
sSQL = "CREATE TABLE " & sTableName & "_Leader (" _
& "[idLeader] Int Primary Key," _
& "[idGroup] int," _
& "[idFile] int," _
& "[idConfig] int," _
& "[DateTime] DateTime," _
& "[Heading] float, [Pitch] float, [Roll] float," _
& "[Pressure] float, [Depth_BSL] float, [Height_ASB] float,"
_
& "[Min_Valid_Sensor] int, [Max_Valid_Sensor] int," _
& "[ASM_Bed_Level] float," _
& "CONSTRAINT [FK_Test_Leader_idConfig] FOREIGN KEY ([idConfig]) REFERENCES [Test_Config] ([idConfig]) ON DELETE CASCADE ON UPDATE CASCADE" _
& ")"
DoCmd.RunSQL sSQL
End Sub
The first table is created just fine.
And if I leave the constraint clause out, the second table is created also.
If I try to run it as an SQL query right in Access, after the error is delivered, it highlights the word DELETE, and if I reverse the update and delete portions, it highlights the word UPDATE.
I have looked up the clause in Access help and even using their example, i get the same error.
Any help will surely be appreciated!
Hi
I have created a simple query that is used as the record source of one of my forms. I want to pass the query a different criterion each time the form is opened.
Any suggestion/example on who to do that will be very much appreciated.
Thanks,
B
I have an Access front-end connected to Oracle tables. When the user opens up the main form to add a new entry, I need to be able to pull the next sequential record number. However, I can't get this to happen, without filling out the entire record, saving, and then it will committ the number.
Can this be done with a pass-through query to the Oracle table, find the next sequential number, and then add it to my record id (ie, 06-1050, with 06 being the year and 1050 the next sequential number). I do have two fields in the Oracle table TXTYear and LNGNumber. This concatenated field is related to three additional tables that have more information. Each of these tables need to cascade a new record.
Confused? me too. any help would be appreciated.
I have a VERY simple select statement that I am using in a pass-through query: "SELECT * FROM dbo_vReturn;", but I cannot get this to work. Each time I run the query it generates an error: "ODBC call failed - Invalid object name "dbo_vReturn" (#208)".
The dbo_vRteturn is a view in the backend. I can open this table/view from Access using an ODBC connection but when I try to run the pass-through query it falls over!
Does anyone have any idea what is causing this?:confused:
I have a query that I want use as a pass-through query (SQL Server databases).
The query has a sub-query that references another database. The query runs fine in Enterprise Manager because EM allows me to access both databases.
If I wanted to I could link both tables through ODBC and then run an Access query that would do the same, however, I would rather use a pass-through-query for this.
The problem is that a pass-through-query in MS Access only allows me ONE ODBC connection (as far as i can tell).
My question is:
Is there a way I can run a sub-query (referencing a different database. i.e. second ODBC connection) which references a second database?
Is this possible?
Thanks
-Gary
Is there any way to pass a variable from one criteria on a query to five other criterias in the same query.
I am using this code to select which person the query is running on
Like "*" & [Enter Part of The Landman Name or Enter For All Records] & "*"
I have five areas in this query where I would need to add the name, I just want to do it once?
Thanks.
Fen how
Hi
I am struggling with what seems like should be a straightforward task. Unexpectedly however it has become an infuriatingly difficult one (no doubt due to my complete novice status).
I have a very basic d/base (3 tables) that I have been searching using basic SQL queries. I want to create a simple 'search' form that produces the results of my various queries without the need to work in SQL. Enter one or more search criteria, hit ENTER, results presented in datasheet perhaps?
Thought this would have been easy but I've had no luck. Can you please explain how I can pass a parameter from a form to a query?
Many thanks
Stuck21
I'm a couple of years removed from Access and shaking off the rust. I hope someone can help with something that may be obvious but I'm missing.
I'm simply looking to pass the begin and end dates to a query driving reports. The calendar form includes unbound text boxes, txtBeginDate and txtEndDate. My code populates the text boxes correctly; the user clicks on the calendar date, clicks the calendar day, then the Begin (or End) Date control, and each populates the respective textbox.
But when I run the query or report, I'm prompted for the parameters. This is what I have in the query's Date field criteria:
Between [Forms]![frm_Calendar]![txtBeginDate] And [Forms]![frm_Calendar]![txtEndDate]
I'm just drawing blank on what I did several years ago to make this work. If anyone can help, I'm most appreciative.
I'm getting an error (SQL command not properly ended) but main thing is, I can't get it to recognize the ms access db.
In a nutshell...I want to query the oracle db for a number and count, then scan a number into msaccess and have it 'find' the matching number in oracle and return the count only to ms access. More comments below between the code and here are table names for both oracle and access:
ORACLE: Table name is: batch_status bs
Field names are: batch_num and Batch size
MS ACCESS: Table name is tblbatchstatus
Field names are: batchnum and idcount
CODE in PASSTHROUGH QUERY:
select batch_num,BATCH_SIZE
from batch_status bs
(this works and selects all batch numbers and sizes from oracle)
(If I say 'where batch_num = 60024 -----this works also....)
However...when I add the below part...I get errors...it can't seem to match to access database....
SELECT tblbatchstatus.Batchnum, tblbatchstatus.Idcount
FROM tblbatchstatus;
where batch_num = tblbatchstatus.batchnum
And I want to just say: where batch_num = <<<scanned batch number>>> and return the id count.
i have this query that i have several buttons that trigger it. how do i pass over a unique variable with each button. each button needs to append a different event. right now i have it set static to "3rd Party Denial" but i need that to be dynamic based on which button is pressed. PLEASE HELP!!!!!!
Code:INSERT INTO [Status Log] ( Status, Edit_Date, Event, Claim_ID )SELECT [Status Lookup].Status, Now() AS Expr1, "3rd Party Denial" AS Expr3, [Claim Report Info].[Claims Header].Claim_IDFROM [Status Lookup] RIGHT JOIN ([Claim Report Info] LEFT JOIN [Status Log] ON [Claim Report Info].[Claims Header].Claim_ID = [Status Log].Claim_ID) ON [Status Lookup].status = [Status Log].StatusGROUP BY [Status Lookup].Status, Now(), "3rd Party Denial", [Claim Report Info].[Claims Header].Claim_IDHAVING ((([Status Lookup].Status)=[Forms]![claiminformation]![ReportForm]![reportstatus1]) AND (([Claim Report Info].[Claims Header].Claim_ID)=[Forms]![claiminformation]![ReportForm]![Report_ClaimID]));
currently i have a macro running when clicked.
that macro runs 2 quieres and a report.
i'm doing this because thats the only way i know how.