Hi I'm new to query writing and I'm needing help with a query that will search a field that either contains a name or an address and only return fields with addresses.
Select address1
From Booktable,
Where (Left([address1],1) = Like "[A-Z]"
Thanks in advance for any help!:D
If this were a table
Amount Job_id Crew_id
$100 1 3
$200 2 4
$400 2 4
$600 2 3
$750 2 3
$800 3 7
and i needed a return (WHERE clause) when job_id is the same (i.e 2), and the crew_id is repeated like 4,4 and 33, how would i write it. I am trying to only sum the rows when this condition is fulfilled. Can anyoen help me
Could anyone explain me the following sysntax :
... where ((cond1 and cond2) and (fld1<>'54')<>'60')
the syntax did not return any error while executing the query.
Thanks in adv.
nils
I have an select statment that pulls data from a server. This server is really slow, and there is quite a bit of data. This statement has the following where clause.
"WHERE upc_number = '" & strPikWhere & "' AND ((dbo_root_description_type.description_name)='PFM S' Or " & _
"(dbo_root_description_type.description_name)='Full tech') AND ((dbo_root_price.zone) Not Like '8*') " & _
I was wondering if the order of these where statements would make a difference, and if so how?
Hi,
I have a query using the between clause with dates #01/01/2006# and #01/01/2007#. I have been reading a little on the between clause and it differs from SQL program to SQL program. What are its characteristics in MS Access is it >=#01/01/2006# AND <=#01/01/2007# or >=#01/01/2006# AND <#01/01/2007#.
Thank you.
Where = "cardnumber = " & CardNumberGlobal
DoCmd.OpenForm "scoreform", acNormal, , Where, acFormAdd, acWindowNormal
When I do a Debug Print for where I get cardnumber = 1111111
The card number is a string because it might have a letter in it
don't i need it to be cardnumber = "1111111"
if so how do I get the quotes around the numbers
I have a table "addresses" that has the following fields.......
id - type - street1 - street2
and type can be one of the follwoing
graduation,home,work
I am trying to write a query that gives the graduation address if it exists or if graduation doesnt exist it gives the home address.....
I was thinking of an If clause but do not know how to do it....
can i write a module...???
Any help on this is appreciated.....
Any other method also can be suggested....
In one of my queries, I'd like to reuse a calculated field as
criteria in the Where clause. SQL seems reluctant to want to
do this. You can RESTATE the calculation in the Where clause,
but can't refer to it by Name. You can Order by it, but it
can't be in the Where clause.
If the query result set consists on a set of Named columns, why
can you refer to a calculated column by Name in the "Order By"
clause but not in the Where clause?
Why is this OK?
Select FldA As FirstField,
FldB As SecondField,
FldA - FldB As TheDifference <-- Just a calculated field
From SomeTable
And this is OK?
Select FldA As FirstField,
FldB As SecondField,
FldA - FldB As TheDifference
From SomeTable
Order By TheDifference <-- Order By is OK
And this in not OK?
Select FldA As FirstField,
FldB As SecondField,
FldA - FldB As TheDifference
From SomeTable
Where TheDifference > 100 <-- Can't use TheDifference in Where clause
Don't want to repeat the calculation.
Select FldA As FirstField,
FldB As SecondField,
FldA - FldB As TheDifference
From SomeTable
Where FldA - FldB > 100 <-- I know this works, but ...
Order By TheDifference
Wayne
i have to list BookID numbers borrowed by patrons where fine are greater than a set amount
View 1 Replies View Relatedhi, is it possible to have a form where you enter a word in a text box and it searchs a table and brings up all records which match it, but it doesnt have to be an exact match.
e.g.
you enter : the
results : the car
the bike
etc.
any help appreciated.
jjames
Hi
I have a problem with an Order By Clause.
Basically, my database holds records of sites in the UK, and I have a select query (qry_SumGIS3) that opens up a summary report (rptSumGIS3) when a button is clicked on the menu page. The report opens perfectly, showing me all the information I need to know about all the sites in my database. However, it is ignoring the Order By Clause I have specifically told it to do. I want to order the records that appear in the report by a calculated field (OBJ_WS_OVERALL_CALC) in descending order (highest to lowest percentage). Instead, it is ordering it by the site id (RTP_ID). How can I stop it doing this?
This is my code (that was created in the SQL view of the query design):
"SELECT MEASURE1.OBJ_WS_OVERALL_CALC, [Tab 1: Factual].RTP_ID, OBJECTIVES.OBJ_ID, OBJECTIVES.OBJ_NAME, MEASURE1.MEASURE_ID, MEASURE.MEASURE_NAME, MEASURE1.MEASURE_SCORE, MEASURE1.MEASURE_WEIGHT
FROM [Tab 1: Factual] INNER JOIN (OBJECTIVES INNER JOIN (MEASURE1 INNER JOIN MEASURE ON MEASURE1.MEASURE_ID = MEASURE.MEASURE_ID) ON OBJECTIVES.OBJ_ID = MEASURE.OBJ_ID) ON [Tab 1: Factual].RTP_ID = MEASURE1.RTP_ID
ORDER BY MEASURE1.OBJ_WS_OVERALL_CALC;"
The red line is the part of the code that I think is being ignored.
Anyone that can help me is a lifesaver!
Hi all, do you think you could help me with this SQL statement I'm using in vba code for a recordset object?
strSQL = "SELECT idCompactPartNumber, txtItem," & _
"lngDepartmentNumber , dteAquiredDate, curPrice," & _
"intQuantity , lngUnit, txtLocation," & _
"imgPicture, dteRetiredDate, blnActive," & _
"blnConsumables " & _
"FROM tblMaterials" & _
"WHERE lngDepartmentNumber=" & lngDepartment
When I try to open the recordset with this, it says there is an error in the WHERE clause. I've tried changing all sorts of things but nothing works. I've tried with the WHERE clause commented out and it all works fine then.
Hope you can help, thanks
Hi Everyone,
I have the following SQL statement. The COUNT(b.BookingID) AS TB, gives me the number of bookings. I need to ensure that the number of bookings + PrebookCapacity is less than v.Capacity. I do this by:
COUNT(b.BookingID) AS TB + PrebookCapacity < v.Capacity in the WHERE CLAUSE. But when I run this in MS Access 2003, it says Enter Parameter Value for b.TB (It does not recognise b.TB as b.TB is not a table field). If I omit AND ((b.TB + PrebookCapacity < v.Capacity AND SessionStatus = 1) OR (b.TB < v.Capacity AND SessionStatus = 0)), from the WHERE clause, it works fine, also giving me the TB.
As I need to do my check in the WHERE clause, how can I check to make sure that the COUNT(b.BookingID) AS TB + PrebookCapacity is < v.Capacity, without any problems.
SELECT CourseName, Format([s.SessionDate]+[s.StartTime],"dd/mmm/yyyy hh:ss AM/PM") & " - " & Format([s.EndTime],"hh:ss AM/PM") AS [DateTime], s.SessionID, PrebookCapacity, v.Capacity,
COUNT(b.BookingID) AS TB
FROM tblCourses AS c, tblSessions AS s, tblVenues AS v, tblbookings AS b, qrySessionsAccepted AS q
WHERE c.CourseID = s.CourseID AND s.SessionID = 85 AND q.SessionID = s.SessionID AND b.SessionID = s.SessionID AND v.VenueID = s.VenueID
AND ((b.TB + PrebookCapacity < v.Capacity AND SessionStatus = 1) OR (b.TB < v.Capacity AND SessionStatus = 0))
GROUP BY CourseName, Format([s.SessionDate]+[s.StartTime],"dd/mmm/yyyy hh:ss AM/PM") & " - " & Format([s.EndTime],"hh:ss AM/PM"), s.SessionID, PrebookCapacity, v.Capacity;
Thanks,
Bash.
in simple my query looks like
SELECT Field1, Field2
from table1
where table1.Field2 in (1,2,3)
and now i need to parameterize this query.... I tried with
SELECT Field1, Field2
from table1
where table1.Field2 in ([Parameter])
Now the problem is... it is working fine with only one value
For example if I input 1, it provide the required result. however, if I input 1,2 it doesnt provide a single recordset
I changed the datatype of parameter from number to text and also tried different way of inputting number like "1,2" , 1,2, but still problem is the same...
Can someone please guide me where I am going wrong
Thanks in advance
This probably sounds stupid but I need to ask because well, I'm stupid. I have created a separate table of partnumbers that DO NOT get included in a SELECT Query for another table (tblmain). How can I use this table in my WHERE clause? Below is my SQL statement and the table with the partnumbers is tblreportpartnumbers.
strSQL = "SELECT SUM([Yield]) AS [My Sum] FROM tblmain"
strSQL = strSQL & " WHERE(([Area]='Cell 1 Supfina' AND "
strSQL = strSQL & "([Date entered]=#" & dtmdate & "#"
strSQL = strSQL & " AND([Part Number]=???????)))"
strSQL = strSQL & " Group By [Date entered];"
Any help would be wonderfulllll
Thanks A lot
Hi,
here is my query which runs within the VB code...
queryString2 = ""
queryString2 = queryString2 & " INSERT INTO markup SELECT TOP 1 JDE_Customer_No AS [JDE Customer No],"
queryString2 = queryString2 & " Custom2.Customer_Name AS [Customer Name],"
queryString2 = queryString2 & " part.id AS Part,"
queryString2 = queryString2 & " price_factor.use_fixed_price AS [Use_fixed],"
queryString2 = queryString2 & " iif(Use_fixed =1,fixed_price_list.price,price_list.price) AS [Base Price],"
queryString2 = queryString2 & " iif(Use_fixed =1,price_factor.fixed_price_factor,price_factor.fa ctor) AS [Factor],"
queryString2 = queryString2 & " iif(Use_fixed =1,fixed_price_list.min_quantity,price_list.min_qu antity) AS [Price Break],"
queryString2 = queryString2 & " part_select.quantity AS [Quantity Required],"
queryString2 = queryString2 & " part.unit_id As [Unit],"
queryString2 = queryString2 & " iif(Use_fixed =1"
queryString2 = queryString2 & " ,(price_factor.fixed_price_factor*(fixed_price_lis t.price*FixedCurrencyConUKP.sterling_exchange_rate ))"
queryString2 = queryString2 & " ,(price_factor.factor *(price_list.price*CurrencyConUKP.sterling_exchang e_rate))) AS Price"
queryString2 = queryString2 & " FROM part_select, part, fixed_price_list, price_list, price_factor, Custom2, CurrencyConUKP, FixedCurrencyConUKP"
queryString2 = queryString2 & " WHERE part.id = part_select.part"
queryString2 = queryString2 & " AND price_list.part_id = part.id"
queryString2 = queryString2 & " AND fixed_price_list.part_id = part.id"
queryString2 = queryString2 & " AND Custom2.JDE_Price_Group=price_factor.customer_grou p"
queryString2 = queryString2 & " AND price_factor.part_group=part." & PriceGroup
queryString2 = queryString2 & " AND Custom2.Customer_Name = " & "'" & CustomerSelection & "'"
queryString2 = queryString2 & " AND price_list.min_quantity <= part_select.quantity "
queryString2 = queryString2 & " AND fixed_price_list.min_quantity <= part_select.quantity "
queryString2 = queryString2 & " AND part.id = " & "'" & select_part_rst!part & "'"
queryString2 = queryString2 & " AND part_select.quantity = " & select_part_rst!quantity
queryString2 = queryString2 & " ;"
It all works pretty much fine, however, the problem occurs because the iif statement tells the code to use either the fixed_price_list table or the price_list table depending on the value of Use_fixed. the iif works fine, its the WHERE clause. because the iif statements tell the query to look at one table or the other, the WHERE clause includes statements from both tables e.g.
queryString2 = queryString2 & " AND price_list.min_quantity <= part_select.quantity "
queryString2 = queryString2 & " AND fixed_price_list.min_quantity <= part_select.quantity "
but some parts dont have information within the fixed_price_list table, and thus are not being found in the results due to the WHERE clause. can anyone help?? i tried using a left join but it didnt work how i wanted. in a perfect world i would be able to include a iif statement in the where clause e.g.
queryString2 = queryString2 & " iif Use_fixed =1, AND price_list.min_quantity <= part_select.quantity, AND fixed_price_list.min_quantity <= part_select.quantity) "
can anyone help?
OK I have code to make a where clause this is working fine. Now I have to add another piece of code to filter it even more, this is where I am having trouble
Code that works fine
'construct a where clause as required for the list box
'if the Manufactur box is blank then all games will show up on the list
If Mfg = "0" Then Mfg = "*"
If Denom <> "" Then where = "DenomFix LIKE '" & Denom & "*' AND "
If Mfg <> "" Then where = where & "MFRCode LIKE '" & Mfg & "' AND "
If Search <> "" Then where = where & "Description LIKE '*" & Search & "*' AND "
'this will filter the list with only the approved games
Dim Aprvd As String
Aprvd = "Approved"
If Me.AprrovedCheck = True Then where = where & "Approved LIKE'" & Aprvd & "' AND "
'remove the trailing "AND ", if it exists
If Right(where, 4) = "AND " Then where = Left(where, Len(where) - 4)
'and if there is any text in the where clause, add the word 'WHERE '
If where <> "" Then where = "WHERE " & where
'apply the SQL to the rowsource of the List box to Pick a game
Me.List8.RowSource = _
"SELECT Approved, ReelStops As [Corp ID], DenomFix as Denom, Description As Theme, Par, MaxCoins As [Max Coin], PayLines As [Pay Lines]" & _
"FROM MachineTypeQuery " & _
where & _
"ORDER BY Description;"
Now what I need to add code to make a where clause that says something like DVIA is greater then 0 (DVIA >0) but I want to do this by its self and add it back into the where clause
Example
Private Sub ApplyPropertyWhere()
If PropertyGlobal = "DVIA" Then PropertyWhereGlobal = "DVIA > 0"
I would then put a line of code in the where clause like this
'This will filter the list with only the property they are from
If Me.PropertyCheck = True Then where = where & PropertyWhereGlobal
Please Help me fix the "DVIA >0" Thanks
Hi,
I have a sub form on my form which displays the normalised data on a datasheet.
I have managed to create a txt box on my main form that contains the number of records within that subform by doing this in the control source.
ControlSource --> =subform_controlname.form.recordset.recordcount
How do i know create another text box that display the number of rows within the subform where fielda = "String" (string being a word)????
Thanks
k0r54
First I just designed my first database and all seems to work fine except that my if I try and use a where clause in my query it won't work. Example below:
This query works fine but as soon as I add this it won't work.
SELECT Assets.EmployeeName
FROM Assets
SELECT Assets.EmployeeName
FROM Assets
WHERE Assets.EmployeeName='Lucky Kruse';
If needed I can send the database as I really need help on this.
Thanks for the help.
I have seen WHERE clause works with GROUP BY, just not this one, not sure why.
Code:
SELECT seller, iid, startTIME , count(*) as cntBID
FROM bid
WHERE count(*) = 1
GROUP BY seller, iid, startTIME
Code:
SELECT seller, iid, startTIME , count(*) as cntBID
FROM bid
GROUP BY seller, iid, startTIME
HAVING count(*) = 1
When I'm runnig the query, I'm getting an error "syntax error in from clause".
I can't enter to "design" mode to find the error.
This is driving me crazy! What am I missing?
Here's my query:
SELECT tblRelease.ID, tblRelease.Application, tblRelease.Date, DateAdd("d",tblRelease.DateVariance,tblRelease.Date) AS ToDate, tblRelease.Time, tblRelease.Description
FROM tblRelease
WHERE (DateAdd("d",tblRelease.DateVariance,tblRelease.Date)>=[Enter Effective Date])
ORDER BY tblRelease.Application, tblRelease.Date;
I've chopped out a few fields to make it a bit smaller and easier to read.
The problem is that whilst the DateAdd() in the SELECT clause produces exactly the date that I want, the DateAdd() in the WHERE clause does not seem to work. I always get all records no matter what date I enter for [Enter Effective Date]. If I change the WHERE clause to
WHERE (tblRelease.Date>=[Enter Effective Date])
then everything works perfectly and I get different numbers of records depending on the date I enter.
I am entering the date in the form 01/08/2005 and this works for the second variation just fine. It's dd/mm/yyyy in case that's important (my local default).
Anybody see my problem?
I was wondering if anyone can help me: I have for example Pupils that are being entered into a table (called log). A query then counts the number of entries for each pupil I then want it ONLY to show the pupils that have been entered in 10 times on todays date (using DATE()).
I know this doesnt work but this is what I want to do:
SELECT log.pupilNo, log.Forename, log.Surname, Count(log.pupilNo) AS Demerits
FROM log, Tally
WHERE (log.Date)=Date() AND COUNT(log.pupilNo)>9
GROUP BY log.pupilNo, log.Forename, log.Surname, log.pupilNo;
Apparenty you cannot have an Aggregate function in a where clause.
Does anyone know a solution, any help would be appreciated
Cheers
Bikeboardsurf
Hi all: I am trying to filter a query based on user input from a ListBox. I loop thru the ListBox and build a comma-delimited list of IDs. It takes one parameter, but if there are 2 or more items in the list, it returns nothing. It's not the query, because if I hard code the same comma-delimited list into the SQL query ("...WHERE CategoryID IN (1,2,3)") it works fine.
This is the query:
SELECT tbl_Subsidiary.SubsidiaryName AS Brand, Sum(tbl_Placeview.Duration) AS SumOfDuration
FROM tbl_Subsidiary INNER JOIN tbl_Placeview ON tbl_Subsidiary.SubsidiaryID = tbl_Placeview.SubsidiaryID
WHERE (((tbl_Placeview.AirTime) Between [Forms]![frmTopBrandsByCategory]![txt_DateFrom] And [Forms]![frmTopBrandsByCategory]![txt_DateTo]) AND ((tbl_Placeview.CategoryID) In ([Forms]![frmTopBrandsByCategory]![txt_CategoryList])))
GROUP BY tbl_Subsidiary.SubsidiaryName
ORDER BY Sum(tbl_Placeview.Duration) DESC;
You can see I'm getting the list of "CategoryID" from a text field; after getting my comma-delimited list from the list box, I assign it to a hidden text field. In debug I can see that the list of IDs is built correctly.
Any ideas? I'm pulling out my hair over this!
Thanks in advance,
james
Would someone please tell me why I'm getting this error with this query?
select distinct
case_id
from closed cases g
where
sys_curr_date between #01/01/2005# and #12/31/2005#
and aft_case_status = 'O'
and not exists
( select 1 from closed cases X
where X.case_id = g.case_id
and X.aft_case_status = 'C'
and X.sys_curr_date = g.sys_curr_date )
Thanks
Hello,
Found this here and was trying to do the following. Delete rows in my table that are dupicates and put them into a new table.
Keep getting a syntax error.
SELECT DISTINCT * FROM tblRaw INTO tblClientcontacts
Anyone know why?
I have a table that has 12,000 rows. Out of those rows are 1600 uniques. I need to delete all the duplicates. Is this a way to do it?
Thanks.