Here is my relationships and a copy of my SQL for this query. Why is it displaying the PK number (RaceClass) instead of the word.
My table for RaceClass has the number, the query has the number but my form has the word.
Many thanks for any help.
Tee.
I was trying to filter a word using Not Like "word" in my query cirteria, some data is blank also, From this record i want to retrieve the result. But when i use Not Like Criteria, filter is working but blanks columns are also filtered.
I want to display all records (including blanks) except what i shown in the criteria.
How to match 4 character word or number or combination by identical 4 characters word or number or combination in one word have 10 or 15 characters.
I have to two separate tables (Table A and Table B). Table A has one column (Tag No) and Table B has about 15 columns with one column name Tag No as below
Table A
Table B
Tag No
Tag No
2009
ZZZ-2030-DC
2010
ZZZ-2010-M9P
[code]....
They're both in MS Access.I am trying to match 2 tables - columns (Tag No) with join query, but not success. I want to match 4 characters in Table-A with 4 similar characters in Table-B (Tag No) cell.What query is suitable to compare two tables.
Code for displaying the Word Print dialogue box instead of sending it straight to the printer.
I have the following code:
'Open Word
Set objWord = New Word.Application
'Letter document would be open
Set objletter = objWord.Documents.Open(strletterpath & strworddoc)
objletter.MailMerge.OpenDataSource (strletterpath & strletterfile)
objletter.MailMerge.Destination = wdSendToPrinter 'normally print
Dialogs(wdDialogFilePrint).Show
objletter.MailMerge.Execute
'not normally here
'objWord.Visible = True
This is to produce a mailmerge based upon a query.
Previously on Access 2000 and Word 2000 it would display the print dialogue box, but I am trying to upgrade it all to 2013 and this does not do it now with Access 2013 and Word 2013.
I have a form with an Auto number field. When the form is opened in new record mode the auto number field displays the following: (Auto Number) instead of the actual number that it has generated. I want the number to be displayed
View 6 Replies View RelatedDear All:
I am curious to see if threre is a way to display the number of records on a form in a text box. I know access has this number on the bottom of the form, but it's a vision issue for me.
Any ideas on how to get this done?
I am most appreciative of all the help.
Regards,
Dion
Dear All:
I am using a combobox to search for students by their STUDENT_ID.
I wish to display a message "STUDENT NOT IN DATABASE" if the ID number is not in the database when it is typed in.
Here is the code I am using:
Private Sub Combo801_AfterUpdate()
' Find the record that matches the control.
Dim rs as object
Set rs = Me.Recordset.Clone
rs.FindFirst "[STUDENT_ID] = & Str(Nz(Me![Combo801], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark
End Sub
Any ideas where to place this message?
Many thanks,
Dion
how to make a text box on a form display the record number so it can be seen along side record selector buttons.
I'd rather have my own then use the record selector option that displays at the bottom of the form when enabled.
I have a number field in my subform that's autoupdated but I'd like it to display "weeks" beside the number without trying to store it, is this possible?
View 2 Replies View RelatedI am on code want to display records on the form by order_number, but i am unable to do it.
Private Sub Combo63_AfterUpdate()
Dim rs As DAO.Recordset
Dim intcount As Integer
On Error GoTo ErrorHandler
Set rs = CurrentDb.OpenRecordset("SELECT * FROM Master_Log WHERE Order_number = " & Combo63.Value & "", dbOpenSnapshot)
[Code] ....
I'm wanting to create a way of searching through and displaying a large number of pdfs. These will be of different lengths and most will have images embedded in them. Each pdf will be categorised using a variety of fields to enable fairly sophisticated searches. I then want to link this database to a Joomla CMS website.
View 6 Replies View RelatedI have created a report from a query. The report contains some numeric fields.
I have set the format of the numeric fields to #,###;#,###;0;0;
Despite this setting, my report is showing numbers as #.###
My end goal is to populate a pre-existing table in an MS Word document with records from a query. The easiest way I've found (through scouring the internet) is to start with the code below (ran during OnClick() even in Access) to get the table the same size as the recordset:
Code:
Dim wDoc As Word.Document
Dim wTable As Word.Table
Dim wCell As Word.Cell
Set wDoc = appWord.Documents.Add(strDocLoc)
wDoc.Visible = True
[Code] ....
The code will shrink the table down just fine if the table has more rows than the recordset +1 (for header column). My hangup with this is the last line ("Selection.InsertRowsBelow 5") isn't executing; rows are not being added to the table. I get no errors -- it just does nothing. I set it as "Selection.InsertRowsBelow 5" arbitrarily just to see if it would even add rows, and sure enough it's not.
In a Query, how can I display in one column a value that can come from 2 different fields based on a selection.
Say I have two date fields (Date1 & Date2) they can both be blank, or one or both of them could have a real value. To make it simple here is the logic I want to employ.
If Date2 > " " display Date2, otherwise display Date1. I want the value to appear in the same column. Can this be done in a query or must it be done in a report?
Thanks!
Well, here's my database :
Name : String
Address : String
I want to add an automatically generated column, "no.", to show which number it's in. Like this :
No. Name Address
1. A Unknown
2. B Unknown2
The problem is, I can do that with Auto-Number, but if the user delete row 1, the number in row 2 is still 2, not 1.
Is it possible to generate query that have "no." column in it ?
creating sequence number in a query using a starting number. For example i want to use the starting sequence number as 5
---SEQNUM---------COLOR-----------
-----5------------------blue--------------
-----6------------------red---------------
-----7------------------orange-----------
-----8------------------black-------------
I have a field in a query that I would like to display differently than what is stored in the table. The field is call apt# and the output looks like this 0000000011409468Ø. I would like to display this data without showing Ø. Is there a way to do this? Thanks..
View 1 Replies View RelatedHi All
I have 28 records in my table - when I run the query (made by using the wizard) it only picks up 6 records.
I have no criteria in the query - just a straight query fulling all fields from the table.
Any suggestions?
I need to display the results of a query on screen when somebody clicks a button on the form. So I put code in the event of the click that looks like this:
Private Sub Command20_Click()
On Error GoTo Err_Command20_Click
Dim stDocName As String
stDocName = "HHC Report"
DoCmd.OpenQuery stDocName, acPreview
Exit_Command20_Click:
Exit Sub
Err_Command20_Click:
MsgBox Err.Description
Resume Exit_Command20_Click
End Sub
So far, so good, but my problem is that this query is one row with a lot of columns - that creates a lot of pages to look through. Is there a command that would loop it around on the same page, or rotate it clockwise so it's going down the page instead of across?
I am attempting to run a query with fields from 6 tables. These tables have been related, but just a simple ID to ID throughout all of the tables. When I select the fields I would like to be in query using the disign wizard it will allow me to create the query, however it will not display and data.
Originally, the query wizard would not allow me to insert all of the different tables fields in the query because "they were not related", so I went back and did the ID to ID relationships. Like I said this now allows me to create the query, but unfortunately no data appears.
Anyone have any suggestions please??
I am trying to make a query that includes 3 other queries. The primary key is customer number and I am trying to pull the sales for each customer by week, month, and quarter. If a customer has not purchased anything it does not display at all. Also, if they purchased something in the quarter or month but not in the past week it doesn't display. I would like the sales for the week, month, or quarter to display 0 if no transactions were made. It is not feasible to add a record for each customer with "0" since this would be updated daily.
View 5 Replies View RelatedIs there a simple formula to return the fiscal year quarter that applies to a date? I simply want January thru March to show as Qtr 1, etc.
thanks
I have times that are converted using a hoursandminutes function.
Times range from HH:MM to D:HH:MM. But it has a problem correctly displaying times that might be 1:00 and 10:00. I want to criteria >"5:00"
Any reason why 10:00 would not show up in this criteria?
Any help greatly appreciated.
In one table i Have component group Id and the description as fields then another table has the sub groupings for each Component Group Id
Example
Component Group ID = 1 which is the primary key
Description = Keyboards
Component
Sub datasheet has Group ID = 1 foreign key
Descriptive Options = USB, Wireless, PS2, Serial
I have joined both of these in a query but what i want is the query when i link it to the combo box on the form i have to only show the Group ID once and not repeat it for as many times as each subdatasheet has records.
Example: When i click External Device I dont want to see the word Keyboard being repeated 4 times (which is because there are four subrecords/types of keyboards) Please Advise.
Hi,
This is a Query / Forms question...
I have 2 tables setup with a 1 to many relationship, simialr to 1 Customer having 1 or more orders. I created a query to prompt for all orders for a particular customer. I then created a form based on this query - i.e. linked the query to a form.
Now when I open the form I am prompted for the customer id and when I enter this all of the results of the query are displayed in 1 form. However, this is not what I want. I would like the orders for the customer to be displayed within a subform on the actual form. In this way the customer details will static and I can cycle through the customer orders in the subform separately.
Is there any way I can setup my query to display the results in this way? I need the prompt for the customer ID. Or is there any way I can setup the form to display the results in the above way?
Any help would be greatly appreciated.
Thanks
Appreciate some help on a update query if possible. In this query I wish to total two sets of figures in about five seperate queries and then export them to another DB. the Dsum function is fine and will produce a result but that result needs to pick up the record ID (called PlanID) which is the primary key for the records being updated. I have struggled with this a bit as no matter what I did the PlanID field would not even display in the query results.
The section of code that is highlighted will now display an empty field and as such the rest of the query is blank. If I manually insert the PlanID figure into the record that the query is updating the other figures will appear.
How can I change this query to add the Planid to the update after it gets it from the customers form?
Thanks in advance.
UPDATE Customers INNER JOIN ExportBudgetTotalsTbl ON Customers.PlanID = ExportBudgetTotalsTbl.planid SET
ExportBudgetTotalsTbl.FoodHouseholdEx = DSum("[totalscash]","[budgetbase1qry]")+DSum("[totalcredit]","[budgetbase1qry]"),
ExportBudgetTotalsTbl.Lifestyle = DSum("[totalscash]","[budgetbase2qry]")+DSum("[totalcredit]","[budgetbase2qry]"),
ExportBudgetTotalsTbl.SavEmerg = DSum("[totalscash]","[budgetbase3qry]")+DSum("[totalcredit]","[budgetbase3qry]"),
ExportBudgetTotalsTbl.BillsFuel = DSum("[totalscash]","[budgetbase4qry]")+DSum("[totalcredit]","[budgetbase4qry]")+DSum
("[totalscash]","[budgetbase5qry]")+DSum("[totalcredit]","[budgetbase5qry]"), ExportBudgetTotalsTbl.Fixedpayments = DSum
("[totalscash]","[budgetbase6qry]")+DSum("[totalcredit]","[budgetbase6qry]"),
ExportBudgetTotalsTbl.planid =
[customers].[planid]
WHERE (((ExportBudgetTotalsTbl.planid)=[forms]![customers].[planid]));