Hi,
When you use the wizard to create a form and a subform in A2003, the wizard automatically creates a query for the subform; however, the wizard doesn't seem to create a query for the parent form.
My question is:
Is the parent form pulling data directly from table?
Regards,
B
I have to three fields in my query wizard, lets call them A and B and C. The condition for the query is either A or B is Null and C is Null. Im not sure how to do this though becuase A, B and C are different fields. I wrote
Code:
Is Null
.
under the criteria of A and B and C, but this specifies that A,b and C is Null, how can I make it so that C must be Null and either A or B or Both.
I used the wizard to create a find duplicates query. I know for a fact that 15 records are duplicates. I'm getting over 300 records. When I dumped the data into Excel and did a pivot table to count the number of records by account number only 15 had a total count of 2. All others only had 1. Why are the ones with no duplicates showing? I just want to see the 15.
View 2 Replies View RelatedI have a table with tasks in which are allocated to specific staff members. The start date of the task is currently inputted by the user and then an estimated time frame is inputted which automatically enters the planned end date.
When a task is complete a Yes/No box is ticked so that these tasks don't show up on the current list anymore.
I wondered if it is possible, for the second task allocated to a certain person to have the start date automatically inputted depending on the planned end date of the precious task.
So if the planned end date was 12/06/2015 then the start date of the next would be 12/06/2015 and so on.
I'm trying to write record set contents to excel. My query runs perfect in access query wizard, but recordset showing as null. My VBA code
Code:
Dim cnn As ADODB.Connection
Dim recordst As ADODB.Recordset
Dim strSQL As String
Dim strPath As String
Dim appXL As Excel.Application
Dim wb As Excel.Workbook
[Code] ....
Is there a way to have Access send an alert message when a particular date is getting close? I have a database that tracks automatic step increases to pay and when the dates occur. I would like to create a pop up that could alert me when a date is getting close so that I can inform the budget person that a certain employee will be getting a bump in their pay starting on a particular date? Is that possible in 2010?
View 3 Replies View RelatedI am looking to call two different queries from report wizard to produce report. Getting error message what to do in this situation as both queries are important as i have to pick all records from query A and just one record from query B any other option to get this in report.
View 4 Replies View Relatedguys, can someone help, i copied this sql from the wizard window, i'm trying to put the sql in a vba code here is what i did, the select is not working it has syntax, can someone help?
Dim mySQL As String
Dim db As Database
Dim rs As Recordset
Dim x As Long
Set db = CurrentDb
mySQL = "SELECT change_order_tbl.serial_num, Max(change_order_requestor_tbl.change_order_effect ive_date) AS MaxOfchange_order_effective_date" _
FROM change_order_requestor_tbl INNER JOIN change_order_tbl ON change_order_requestor_tbl.change_order_id=change_ order_tbl.change_order_id
GROUP BY change_order_tbl.serial_num
HAVING (((change_order_tbl.serial_num)="abc"));"
Set rs = db.OpenRecordset(mySQL)
rs.MoveFirst
x = rs!countoffield
I have a table that shows all the company's PC's, and another table that shows all the software. I have a smart look up for a the PC's that when you click on it, it will show you all the software loaded to that machine. however, there is so much software loaded to these machines that when the look-up is clicked you can not read all of the software because it is listed horizontally. Is there any way that you can have the look-up view vertically. Any other ideas would be much appreciated.
View 3 Replies View RelatedOk, I have Acc2k3 professional with Visual Studio Tools for the Microsoft Office System which according to MS includes the Microsoft Office Access 2003 Developer Extensions (http://msdn.microsoft.com/vstudio/office/officetools.aspx) that are required to package an MDE/ADE file using Acc2k3.
The question is how do I run it? I cannot find anything to do with packaging or deploying an Access file anywhere, not only in Access but ot the system and on the Visual Studio Tools for the Microsoft Office System cd.
I should point out that my PC has VB.NET 2003, Office 2003 (prof) and Office 2000 (prof - Access only) installed on XP SP2 (I believe that all relevant SPs and critical updates have been applied). I have tried upgrading my project from Acc2k to Acc2k3 and all to no avail.
TIA
Marcus.
Hi
I hope someone can help on here with this.
I am having problems using the package wizard. I can run through the first couple of steps on the package wizard, but when it asks for a language to cache, it fails to install the necessary files.
I have found the resolution on the MS KB site about copying the files to the HDD, and the renaming the exe file to SETUP.EXE, but whenever I select this file to cache, I get the following message:-
'C:SourceSETUP.EXE' could not be copied to 'C:Documents and SettingsusernameApplication DataMicrosoftAccessADE11Cache1033SETUP.EXE'.
Verify that the source file exists, that you have write permissions on the destination folder. etc
I don't think it is permissions, as it does copy the msi and cab file to that particular folder, it's just the SETUP.EXE file that it doesn't copy over.
Has anyone ever experienced this before when using the Package Wizard?
Thanks
I am running Access 2000. The control wizard is not available. It does not come up when I add a command button for example. How do I get it turned on?
View 6 Replies View RelatedHI, I am using Access 2003
I tried using the security wizard and I think I, I know I should have read up rather that trying to set it up. I printed the security report so I can get back in to the db but now all db's on this pc require me to log in now. How do I remove this security? Can I just delete the security db that was created by the wizard?
Thanks for your help.
Hi
I want to manipulate a few tables and make them into one table, but I don't want all of their fields. I heard that I could do it with "map table wizard" from the top of the menu. Where can I find it? Or, can anyone recommend me what I should do better?
I use Office 2002.
Thanx.
Gaufres
I have three fields that I would like to have access the same table using the Lookup Wizard. I am unable to get the query to work.
Example:
The Fruit table has 5 records, let's say: orange, apple, banana, kiwi, strawberry.
The first field -- Fruit1 -- would use the Data Type Lookup Wizard referencing the Fruit table.
The second field -- Fruit2 -- would also use the Data Type Lookup Wizard referencing the Fruit table.
The third field -- Fruit3 -- would also use the Data Type Lookup Wizard referencing the Fruit table.
The bottom line: a person will have a choice of 3 fruits.
Again, the problem is that I cannot get the query to work where I choose =banana for the criteria for all three fields. Banana might be person one's first choice, but it might be person two's second choice, etc. I'm looking for all the bananas no matter which choice it is.
Your assistance is appreciated.
Print Wizard Help (http://www.access-programmers.co.uk/forums/showthread.php?t=96689)
View 1 Replies View RelatedHello,
I have just started on Access: creating 2 tables with primary keys and one-to-many relationships, and 2 simple queries. I want to create a form but can never complete the wizard or auto-form or else because it crashes with the pop-up message "object variable or with block variable not set" ? what does this mean?
thanks for your help.
I've been building a database with Access. When I added a combo box to a form, it used to pop up a wizard which would guide me through selecting the data the box displayed and what happened to the selection the user made.
It has now stopped displaying this wizard.
How can I turn it back on?
is there such a thing ? that helps you build the msgbox of your choice then gives you the code to support what you have designed?
is there an addin or wizard about to do this ?
if so where can i get it please
Andy
Howdy All!!! I am receiving the below error message:
"You have chosen fields from record sources which the wizzard can't connect. You may have chosen fields from a table and a form a query based on that table. If so, try choosing fields from onluy the table or only the querry."
OK here is what is going on... I have a table that is linked to a *.txt file. This *.txt file comes from our AS400 and is the root of all my information. It has 2 pieces of information in it that I need to seperate out and then eventually join back together. It is a space delimited file. The 2 pieces of information are:
1) Header (Dates, Vessell, and Container information)
2) Body (Product information and qty of each Container)
The mapping looks like this:
Header='ISPDD'
1- A Record Name = mid(1,5) [Ref. Example:ISPDD]
2- Unique Key = mid(6,7) [Ref. Example:0000001]
3- Container Number = mid(13,10) [Ref. Example:MK03000001]
4-Arrival Date = mid(23,8) [Ref. Example:06092004]
Body='ISPDT'
1- A Record Name = mid(1,5) [Ref. Example:ISPDT]
2- Unique Key = mid(6,7) [Ref. Example:0000001]
3- A item code = mid(13,6) [Ref. Example:007529]
4- A item color = mid(19,3) [Ref. Example:015]
5- Item Qty = mid(22,6) [Ref. Example:111111]
What I did is wrote 2 query's. One that looked at the *.txt file and produced results on [Like "ISPDD*"] to give me just the HEADER information. I then added the criteria from the space delimited mapping above. I did the same to pull out just the BODY information, again adding the criteria to the query from the space delimited mapping above.
Now that I have the two pieces of information, I want to run a report and combind the 2 together in a more reader friendly format. In doing so I received the error message above.
I then tried having the query's create a new table after they run (one Header Table and one Body Table). Once that completed I created a relationship between the 'UniqueKey Header' and 'UniqueKey Body'. This actually worked but, when I receive a new *.txt file and run the query it gives me read only/cannot delete files because of relationships. Needless to say I am in a bind. Hopefully I shared enough detail to help me with my problem. Many thanks in advance for the help. One other piece of info, This *.txt file can contain many headers and boddy information. I have received one that had at least 10 different Unique keys that had to be linked together.
Best Regards
Mike
I am at the point were I want to package and distribute my application to other users. My application uses several .bmp files and other resources that I have stored in the OFFICE11 file because you have to reference the location of the objects in VBA Code where access can find it.
What I cant figure out is, how do I get the package wizard to install the resource files I include with my program to where I want them (OFFICE11) so if the user installs the database at a different location than the default location which is C:Program FilesApplicationNameI'mDistributing, the program will still run because the resource files can still be found by the program in the OFFICE11 file.
Make Sense?
A more advanced problem I am experiencing:
Is there a way to have a run time distributed application automatically find and repair it's link to the back end if the back end gets installed to a network instead of the default Local C: path?
Anyone?
I will try and explain this as simply as possible.
I have a lookup table that is purely dates so the field is Clinic_Date, the format is date/time, and the input mask is set to short date.
I have a table called appointments. I have a field called appt_date which I am trying to make a look-up field by using the wizard to look up from the clinic_date table. However I an getting the error message "You have entered an expression that has an invalid reference to the property l." (thought it doesn't look like the letter "l" but more like a long vertical line).
What on earth could be going on?
Ok......
It's much as I thought it would be. MS Access is limited for a mid size database application. I have developed this mid size database for the medical clinic I work for. I didn't want to do it, but they saw some of my personal projects I created and pretty much told me to come up with something.
Well, the good news is, the database itself works exactly as designed, meaning it does its job very well. The bad news, and I knew it would happen, is instability. When I first started creating this program, I had no idea how many people would be using it at once. That, and after reading through these forums for the last few months, I realized that Access wasn't the puppy to be creating this database in. As it stands, about 130 - 150 systems access the database (about 3 times more than I originally forcasted.)
I'm sure those of you who have done something similar knows the next thing I'm about to say...... yep..... mysterious run-time errors - locked database from time to time - owc (office web component) errors...... etc. etc. These errors pretty much happen during peak hours.
I am pretty positive it's because access wasn't designed to handle such a load..... which led me to a researching a resolution. The answer that may be my savior is the upsizing wizard included with ms access. We do have MS SQL server running on a server...... I was just curious if anybody's ever used the upsizing wizard; either that, or has anyone ported an access project to sql. (This is a big program, and would hate to have to reprogram)
I am having a problem when trying to use the Form Wizard.
I select a table or query, but it shows no fields! Here is a screenshot:
http://img.photobucket.com/albums/v85/retroap/access.jpg
I am running Office 2003 with the latest updates on XP Professional SP2, again with the latest updates. The install was fresh only about a week ago, and I had only used this install of Access for a few hours before it started doing it!
I have tried creating a totally new database, or using an existing database, and the same happens. This led me to believe it was my Office install. I tried doing a repair through add/remove programs, which successfully repaired Office apparently, yet the problem persists. I even totally removed Office, rebooted, and reinstalled, and tried without updates!
Can anyone suggest what I could try next?
Hi everyone,
I have made a form using the wizard, the form is based on some tables. Now I have to add one new table to the form, how can I do this? If I change the recordsource, it wouldn't work, I can't even write anything in the form.
Is it possible to add a new table or query to a form that is made with the wizard? Or have I to made the whole form again??
Thanks,
Ankie
I'm just after getting my web site designed and I want upsize my present database which is MS Access to a MSSQL server can anyone help? I'm totally new to databases so I need step by step help!
View 1 Replies View Related