Hi,
I have to make changes to a report that is built from a linked table that the team is using constantly. I don't know this application well at all and its going to take some analysis. How can I work with the table w/o locking the users out of the table.
Thanks for your help!
I am slowly but surely learning more everyday about Access. I inherited a database system from a gentleman who set up a lot of great stuff but did not document anything! I am working with a linked database in Access. I am trying to add information to a look up wizard. I am unable to de-select the "Enforce Referential Integrity", so I deleted the one to many relationship in hopes of being able to add the information. However, I am still not able. A message pops up stating it is a linked table and some properties can not be modified. My look up wizard Row Source can not be modified.
Any tips on how to get around this?
I am trying to build a Form that will show an estimate (then eventually will be moved to a project if customer and employee aggree to price and project) in a Form F_Estimates is a M_Customers(Customer_ID) (Based on a Table) and thier info in a Subform. Also is the "projected costs" from parts out of the Parts(Part_ID) (Based on another Table) in a second Subform as a list that I need to calculate $$$ in
(Dang that still sounds evil and definately NOT understandable even after edit... so)
Here's some basic info
Tables
EstimatesandParts - Table
EstimatesandParts_ID : Autonumber
Estimate_ID : Number
Part_ID : Number
Parts - Table
Part_ID : Autonumber
PartNumber : Text (not a number due to some part#s have letters in them)
PartName : Text
Unit Price : Currency
Description : Text
Estimates - Table
Estimate_ID : Autonumber
InvoiceNumber : Text (again can have letters in it)
EstimateDate : Date/Time
EstimateTime : Date/Time
Employee_ID : Number
Customer_ID : Number
ProblemDescription : Memo
Customers - Table
Customer_ID : Autonumber
FirstName : Text
LastName : Text
CompanyName : Text
Address : Text
City : Text
Province_State : Text
Postal_ZIPCode : Text (CDN Postal codes are letter num letter...)
you can see the link table in the EstimatesandParts Table
Now I want to use that link to populate a subform in the F_Estimates form
Forms
SF_Customers - SubForm
(all boxes atm are text boxes on this form till I figure out the Parts section then will use same base for this so I can pick any customer in the database to be the customer for this estimate. Also will have ctrl button for making new customer with customer form and a refresh on Focus Gain bit of code)
FirstName
LastName
CompanyName
Address
City
Province_State
Postal_ZIPCode
SF_Parts - SubForm
Default View -Continuous Forms
(want it to be a list of parts that I can grab prices and descriptions from then in a bit of code to calculate a cost of parts)
Part_ID : Combo Box
Control Source - Part_ID
Row Source Type - Table/Query
Row Source - SELECT Parts.Part_ID, Parts.PartNumber, Parts.PartName, Parts.UnitPrice, Parts.Description FROM Parts ORDER BY Parts.Description;
(Pulls info from the table Parts for input into a list of parts to be used on that project)
PartName : Text Box
UnitPrice : Text Box
(here's where I run into problems due to the fact that the form is not based on the parts table but rather the link table EstimatesandParts so I can't propogate the info to the 2 other text boxes, ps I dont care if they cant be text boxes and have to be linked or some other type I'm not "set" just need to find out how to make it work )
(have tried a couple things to complete this task)
Me.txtPartName = Me.Part_ID.Column(2)
Me.txtUnitPrice = Me.Part_ID.Column(3)
(works AWSOME ... for ONE ROW then propogates the second selection to the first and second and third selection to first second and third and so on ...)
(tried to make control source for the txtPartName to)
=Forms!Parts!Partname
(Doesnt exist .. akkk, cant use ActiveForm either as it doesn't focus on the SubForm but the MainForm ... cry)
F_Estimates - Form
Estimate_ID
InvioceNumber
EstimateDate
EstimateTime
ProblemDescription
(all basic Text Boxes)
Employee_ID
Customer_ID
(Combo Boxes Select Customer and Employee from list of present ones of each)
SF_Customers
SF_Parts
(Both SubForms on the main form)
Now this is an Exerp from my entire Database I like to work on one small problem at a time and I have made this its own little database till I figure out the problem then I will bring the info I learn back into the rest of the database and go from there ...
Hope you can help I have a feeling I will need to make a recordset and go from there but I'm just not able to wrap my head around that for some reason
Thanks in advance for ANY and ALL help that I get from here
Hi,
I have an Access 2000 database with some linked tables. When upsizing the database I selected 'Save password and user ID with attached tables'.
Therefore in the Linked Table manager after each table in brackets I have the name of the database to which the tables are linked.
I am now wondering if I want to link the tables to a different database how do I change the database name, which is in brackets after the table name.
If I select a table and select 'prompt for a new location each time' I am getting prompted to select a different DSN. At the moment I don't have a DSN and I don't want to have to set one up.
I imagine that the database name and the user id and password I entered in the upsizing wizard are stored in some configuration box but I don't know where I can access this.
Can anyone point me in the right direction??
Thanks
I have an MS Access accdb with linked SQL Server 2012 ODBC tables. I am working on a procedure to copy data from local tables to these linked tables (identical schema). I did a simple
Code:
DoCmd.RunSQL "INSERT INTO linkedTable SELECT * FROM localTable"
This works, but is very slow. Way too slow. (INSERT copies the data one record at a time).
I would like to copy the data in a bulk operation, or operations that I can execute programmatically.
I have a table for a multiple parents linked to a child table. I need to figure out a way to only allow 1 parent to be coded as primary, 1 as secondary, and then the rest as other... I thought about making Primary/Secondary/Other a primary key. But then I can only have 1 other. I would have to make a finite number of parents that could be entered and I want an infinite number.... My end goal is to have a report that only has a primary and second parent on it, but the rest of the parents still exist in the table...
*Child_ID
Parent_First_Name
*Primary/Secondary/Other
Hi,
I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
Thanks for your support
GinnyP
I have one DB that is used for creating/storing customer ID's, and another DB that is used for creating/storing job information for customers.I have linked the table from the customer DB to the job DB.
There is a table in the job database that holds customer name and ID, and some VBA that generates unique job codes.
Is it possible to have the data from the linked table automatically update into the existing table?
I have what is probably a stupid question but I've been struggling with this one for a while. I have an ordering database which has an Orders table (containing Order ID, Date, Supplier etc) and an Order Line table within which I have a combo box for Product name, supplier, price, VAT rate, Line price etc. At the moment, I have the order line table as a subform within the Order form (run from the Orders table). The problem I'm having is the subtotal and total fields. At the moment these are in the Order Line table as I cannot figure out how to get these in the Orders table. In summary, can I make a calculated field in one table that calculates values from another table (linked by Order ID)?
View 3 Replies View RelatedI would like suggestions on how to "properly" set up the tables and relationships required to do the following.
We have a customers table that can contain a Country, ShipCountry, and BillToCountry. All 3 countries could in theory be different. I want all 3 to store the CountryID from the Country lookup. I am trying top avoid a circular reference or any data contention issues. What is the proper method to do this?
Thanks very much in advance!
I am rebuilding an application for a client and I have an Access table that I am using as a temporary table. Once the user is done entering information into the temporary table through a form, the user presses an update button that appends the records using an Append Query in Access to an SQL Server Table.
The following error message occurs:
"ODBC -- insert on a linked table 'linked tblname' failed.
[Microsoft][ODBC SQL Server Driver][SQL Server] Explicit value must be specified for identity column in table 'linked tblname' when IDENTITY INSERT is set to ON. (#545)
I am using a form, subform combination to record a bill with many details. The bill summary is posted into a tbl_TransactionsMain table in SQL Server using the ADO AddNew method. The PK for the tbl_TransactionsMain is then entered into the temporary table in Access. When the temporary table records are appended into tbl_TransactionDetail the error message occurs.
What is also interesting is while typing out this post I thought to test the error by manually trying to run the query. The query worked like a charm! :confused: When the orginal error occurred off of the form I tried to run the query manually and it failed. I am guessing that this might have something to do with the ODBC timeout.
I think SQL Server/ODBC connection is not liking how I have a set of records in an Access table with foreign key numbers assigned when I am attempting to append the records. I am new to SQL Server and any ideas are most appreciated! :)
I'm having trouble with a new project I'm working on. The application is mainly going to be used to display data, which comes from a linked table. It has to be a linked table (in my opinion) because it's replaced once per week from a fresh data dump. For each of those records, though, there will be notes made in a local table named "Custom-Data". My trouble is displaying a mix of information from the linked table, "Roster", and "Custom-Data" because linked tables can't be assigned a primary key.
Essentially, when a record is pulled up, a bunch of data from "Roster" will be shown in addition to the comments from "Custom-Data".
I have a basic database design, well I think so anyway. It only has two tables:
1. tblClientInfo
2. tblNotes
Basically each client has multiple notes/comments that can be linked to its record, hence the tblNotes table. The two tables have a one-to-many relationship, being that each customer can have many notes.
I then have two forms:
1. Claims Loss Form
2. tblNotes_DatasheetSub1
So I can enter multiple notes for each customer. The problem I am having is with the report output. It wants to print every note (record) that is linked to the customer. I just need it to print the most recent note for each customer (It would save a lot of wasted paper).
Example of a print out of what it is doing:
John Doe - 123 Easy St - Notes 1 (Most Recent Note)
John Doe - 123 Easy St - Notes 2 (Previous Note)
John Doe - 123 Easy St - Notes 3 (and so on...)
It is printing duplicates of the same customer by adding the additional notes for that same customer on a new line.
How can I tell it to only print the customer one time in the report, and most importantly, to only use the most recent note that is linked to the customer?
I tried using DMax("NoteDate","tblNotes"), but this only returns one customer with one note. I need it to do that for each and all customers.
I have successfully ran a subquery (two queries with one linked to another) by following detailed instructions from this page I found: [URL] .... It works, but the problem is it only shows the latest date for each note, not the actual contents of the note. I feel so close with this option, but so far at the same time.
The TOP n records per group looks promising that I found here: [URL] ...., but I honestly don't know how to implement it correctly in my SQL. I am very much still learning Access and apparently have stumbled into something that is much more complicated than I had originally imagined. I just assumed I could filter the duplicates out, or tell access to print the last or most recent note record for each customer.
I have a database that is designed with a front and back end, with the FE linked to the BE. Some potential customers want to play around with the database, and the easiest way for me to get them access to it would be for me to combine the FE and BE and just give them a copy of that. how to link a table, and I know how to import a table. What I'm unsure of is how to cleanly convert a linked table to a local table.
View 2 Replies View RelatedI have two tables, submit and imgdest. Submit is edited by front-end users to load pictures for back-end users who then delete the images when they're done with them. Submit is edited by a form, in the form I've placed a button (Command37) that has code:
Code:
Private Sub Command37_Click()
Call InsertData
MsgBox "Completed", "0", "Completed Backup"
Exit Sub
End Sub
Private Sub InsertData()
[code]....
This code was working for a short while, now anytime it's run I get error 3027 - Cannot update. Database or object is read-only. However, I can open the linked table and manually change information in it with no problems.
In a local DB table or a data grid view, the columns have an arrow at the top next to the name. When the arrow is clicked, all the entries in that column are displayed with check boxes. They are listed underneath the "sort" and "text filter" options. I am working on a DB project with ODBC linked tables instead of a local access table.
My linked table does not have this same functionality. It is missing the names with check boxes where I can select individual entries. I don't know the correct terminology for this functionality I am describing. That makes searching tough. What this is called and why the tables would be different.
I have two table
1 is name master containing EMPID(Primary Key)
2 is Saving which also contain EMPID
i want to entered data in Saving with each and every EMPID with Master
I have a form that contains the following: Combobox, (Lists BadgeNum from tblPersonnel)
2 Textboxes (LastName, FirstName) populated via code from the combobox using info from the same tblPersonnel.
2 labels (one containing Date, another containing Time)
ToggleOnButton (Valueof 1)
ToggleOffButton (Value of 0)
Savebutton
This form is basically used as a cheap police timeclock. All Im trying to do is when a user chooses their name from the combobox, clicks ON or OFF and then save, is just write the much of the same info to a table. Specifically, BadgeNum, DateIn, TimeIn, DateOut, TimeOut.
Well, heres the situation. I have a complicated query that refuses to work all the time using a linked table for the data (data is gathered from a FoxPro DB). If I copy the data into a local table in my database then the query will run fine.
The data needs to be updated only 1/month but I don't want to have to do it manually every month. I would like to use VBA to copy and paste the data from the linked table into my local table. Does anyone know of an efficient way to do this? I'm trying to avoid running a VBA loop and adding each record one-by-one (very slow).
I have a database that is used in our office. It is split with the backend stored on a network share.
I need to make some updates, and to do maintenance I usually make a copy of the frontend/backend to my desktop, and use the linked table manager to switch to using the local copy of the backend so I don't mess up the main data. All good so far.
however, I recently added a new table, and originally called it "overRides", I then decided that "adjustments" was a more suitable name and changed it.
Now whenever I try to switch from the main backend to my local copy I get a message when relinking "adjustments" that Access cannot find the object "overRides" and to make sure it exists and the name is spelled correctly...
I have been just deleting the linked table and reimporting "adjustments" but this issue keeps coming back and it's driving me nuts!
How can I make Access forget that this table used to be called "overRides"?
I am just starting find my way around Microsoft Access However I am currently stuck on something to do with table events (data macros).I added a Before Change and After Update macro to a table and added a RaiseError method to each of them.
I tried to update a record in the table. A dialog appears corresponding to the Before Change method. I deleted the Before Change method and then once again tried to update the table. No dialog box appears The After Update macro does not seem to fire.I tried all the other "After Events" and nothing seems to fire.
I have been given a paradox .DB file that I can (seemingly) "import" to Access 2002 SP3 using File/Get External Data/Import. (Am not choosing "Link Tables"). It gets imported as Type Table: Linked Paradox. When I then open the table for a datasheet view, the following happens:
(1) datasheet window appears with field headings and normal-appearing data in all records and fields
(2) error msg appears "Reserved error (-5016), there is no message for this error"
(3) When I close the msg box, all field data gets replaced by #Name? I can open the table in design view, but no properties can be edited.
Any way around this?
code Fails at appending new table to catalog,
i am missing something, don'tknow what though,
thanks in advance,
sportsguy
Private Const strProvider As String = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source="
Private Sub ADOLinkProjMaster_DblClick(Cancel As Integer)
Dim cnn As ADODB.Connection
Set cnn = New ADODB.Connection
cnn.Open strProvider & "F:PROJMASTER.mdb"
Debug.Print cnn.ConnectionString
Dim cat As ADOX.Catalog
Set cat = New ADOX.Catalog
Dim tblLink As ADOX.Table
Set tblLink = New ADOX.Table
' Open the catalog.
cat.ActiveConnection = cnn
With tblLink
' Name the new Table and set its ParentCatalog property to the
' open Catalog to allow access to the Properties collection.
.Name = "PROJMSTR"
Set .ParentCatalog = cat
' Set the properties to create the link.
.Properties("Jet OLEDB:Create Link") = True
.Properties("Jet OLEDB:Link Datasource") = strProvider & "F:PROJMASTER.mdb"
.Properties("Jet OLEDB:Remote Table Name") = "PROJMASTER"
End With
' Append the table to the Tables collection.
cat.Tables.Append tblLink
Set cat = Nothing
End Sub
what am i missing??
oh, and i shouldn't see the table in the db container either, correct?
I have an afterupdate event that is supposed to send an email when a box is updated. Most of the times the code works fine except for one case.
The code checks the value of a field in subform in another tab of the same form
Code:
'find the MSM date
[Forms]![Project Main]![Marketing Specialist Main]![MSMDate].SetFocus
MSMDate = Nz([Forms]![Project Main]![Marketing Specialist Main]![MSMDate].value, "__-___-__")
This field (MSMDate) keeps its value in a separate table.
The problem comes when there is no value in this other table for the given project. If this is the case, the subform does not even appear on the main form (it is all a grey box) and the Setfocus returns an error.
I tried to comment the setfocus line to see what the NZ function would do in the next line and it also returns an error.
It is almost as if the subform was not "initialized" for that particular record...
How can I account for those cases?
OK, so now in my Dbase Ive got the main data, and another table with 2 fields in,
in the second table its a part number and a weight,
on the main data I need the user to select the Part number with a combobox that the weight is filled in the maindata automatically, I dont understand Relational Dbases, yet so if anyone knows how I can do this, please explain in little words, lol
I did manage to do this earlier in the dbase with box sizes and weights but as there are only 4 size of box I coded it into he VB, but with the caps there could be up to 100 different caps.
Anyone HELP PLZ.
I'm working with a split database. I frequently change the b/e link to different .mdb files. Sometimes it's because I'm debugging or testing changes to the front end, sometimes it's because I'm working with data from different projects.
I thought it would be nice if I could display the name of the currently-linked back-end .mdb file on a form. I've been unable to find a way to return to a variable the name of the b/e file.
Any suggestions?
I'm using Access 97 (still) on Windows XP Pro.