I'm new to MS Access and this forum. This may be a silly question but I cannot find answer anywhere: can I wrap text in the header columns of a table in Datasheet view as shown in the attachment?
BTW, I cannot make the column width wider because I want to display as many columns as possible.
Any help would be great appreciated. Thanks.
Is there an option to 'wrap text' like in Excel? My field names are quite long and cant find wrap text in formatting.
View 4 Replies View RelatedI have a report, a phone list, which has two columns, see the attached file for a screen shot.
The Employee Name, Mobile Phone and Desk Phone text is in the "Page Header". The Data fields that retrieve from the table are in the "Detail" section. The whole report is 8.89cm wide. The two columns fit perfectly across a portrait A4 sheet.
When I run the report to Print Preview, I get the two columns fine, but the Employee Name, Mobile Phone and Desk Phone text doesn't repeat at the top of the second column. Is there some way of achieving this? I want the part I have circled in RED to appear over the top of the second column as well.
I would have thought there would be a simple check box somehwere that would be something like : "Repeat Page Header on multiple columns", or something as equally useful. Strange that this is so difficult to do, as am sure that this sort of thing is something that lots of people would want to do?
I have the following expression, which needs to be wrapped by some extra logic:IIf([NetTotal]<>0,IIf([NetTotal]-[InvoicesRaised]>0,30,[InvoicesRaised]/[NetTotal]*30),0)What I need to do is, if the above expression comes to less than 0, then the control box needs to display 0, otherwise it should display the value of the expression.Now, I know I can do this by IIf(expression<0, 0, expression). However, this adds a lot of code in there and the expression is put in twice. Is there an alternative way of doing this ?
View 1 Replies View RelatedI have a textbox in a continuous form. What I need is when the text is long, i want the textbox to wrap as it does in excel (vertically) so the text will be all visible i don't want to use the scroll bar.
View 3 Replies View RelatedHow do I return the Column Header Text on Right Click of listbox?
Thanks
I need to create a text file that is exported from access to txt. I know how to do this; however, I need to have a header and footer setup in this file that dynamically changes with the day. How do I create these two required objects?
View 1 Replies View Relatedsimple table 6 columns
startdate
enddate
custacct
salescost
salesprice
salesqty
the txt file is set up so that there is a header record, 4,999 lines of data, then the same header record, then 4,999 lines of data, then a header record etc etc. for as many lines as is in the download. This is a download TXT file from a Microsoft Axapta ERP system.
I have my table all set up and during the import I want the header records to be dropped. I tried in the validation section for startdate {Not "startdate"} but that did not work. Is there some simple way to ensure the header records are dropped?
Hi everyone,
I am in desperate need of help. I have a huge table in Access that is too big for Excel. I need to do something like Data/Text to Columns in Excel, but in Access. For example 1/2/3 needs to be divided seperately in their own columns. Any way to do this? Thanks in advance for the help!
Hi,
I'm new to Access and was wondering if there is a function that can split/divide the contents of one field into seperate fields like you can do in Excel via the 'text to columns' function. I have people's names (surname christianname in one field in a table and want to have a query that splits them up by the space between the names and put one in one filed and the other in a seperate field).
Hoping someone can help me..
Thanks.
Greg
Hello all,
I have a datasheet with a list of names stored in a cell, separated by semi-colons. I want to separate that list into separate columns. In Excel, I would use Data/Text to Columns. Is there some sort of Query something that would do that for me in Access?
Please advise!
tia
Angel
Hi Guys,
I was wondering you you could do a text to columns in access like you could in excel? For example, if my field has this:
AAA-BBB-CCC-DDD
Is there a way i can split it up by the "-" and have 4 columns or fields, broken out from the main field:
Column1 Column2 Column3 Column4
AAA BBB CCC DDD
As always, thaks in advance.
Caliboi
Hi guys,
Wondering if this can be done in access. In excel, if I have the following data on a filed:
AAA-BBB-CCCC-DDDD
I can use the text to column feature and break it into 4 fields with the hyphen as the break. SO the 4 fields in excel would be:
Field1: AAAA
Field2: BBBB
Field3: CCCC
Field4: DDDD
Can access do this? I know I can combine fields, but can it break down a field?
Thanks in advance all,
Caliboi
Hi!!
I have a quick question. I have a field that has information that looks like the below. I need it to be in 2 separate columns, but there is no space between the numbers and text otherwise I would know how to do this in excel. Anyone know how to do this is excel or access?
11000031377A & A AMERICAN DETECTIVE BUREAU
It should be separated as....
11000031377 A & A AMERICAN DETECTIVE BUREAU
Any and all help would be appreciated!!! Thanks!
I am creating a database that keeps track of everyone who is currently "In" at work. I am giving a set number of people "administrative" access to the backend where they can view the status of everyone. The plan is to have them export each daily report into an Excel document. Every morning when the administrator comes in, he/she will need to click a button that clears everyones status so they can start over. The employees names and payscale stays the same and does not clear.
I am all about automation! If there is a way where the specified fields automatically clear, say after midnight.
I'm trying to build a query that can parse Delimited text to columns, for example I have the following:
ID,Name,Tel,Fax,Email,Directorate,DOB,AOCD,Reg,CD
I would like to convert the above in 10 seperate columnns within a query?
Is this possible? I know you can import delimited text to columns but that is not what i'm after for other reasons.
My Approach database contains records relating to nearly 800 sites in London. There are radically different amounts of data held about each site. The database contains a lot of different tables, each containing a different class of information. Not all the sites listed in the database have information in all of the tables.
The unique thing that holds it all together is the unique site reference number. Unfortunately this is split into two separate columns in the Approach database, "Reference" and "Suffix". Not all sites have a suffix. (The purpose of the suffix is to identify sub-sites which are subordinate to the main site reference, but need to have their own individual records.) Because many sites have no suffix, most of the fields in the second column are blank.
In order to link all the tables together in access I need a Primary Key which is unique to each site. In this case the reference/suffix number is the obvious (only) candidate. There is no problem using two different columns to create a primary key. The problem I face is that it doesn't like the fact many of the fields in the second column are blank.
My solution to this is to combine the two columns into one. That would give every site a unique reference, and none of the fields in the combined column would be blank. Can I work out how to do it? All I want is a new column that displays the reference and suffix (if any) in a single field, no spaces.
Is there a function or query that I can split a field into different columns?
For example, I have First Name, Last Name, Address.
But I want to split the address field into Address1, Address2, Address3, Address4 as the initial Address field has a lot of characters with commas e.g. 11 London Road, Liketown, Likeshire, London.
So, I want to be Address1: 11 London Road, Address2: Liketown, Address3: Likeshire, Address4: London.
I thought that I can export the field using a simple query and then re-import it with using the text field into columns option, but it is time consuming.
For whatever reason when I try to add up two columns in a query instead of adding up the two numbers it displays it as a text string. So if one column has a 5 and the other is a 2 I am looking for the calculated column to reflect 7, currently it is showing 5,2.
I have added up items in the past so I am unsure what the problem is
should be [rev bid amount 1]+[rev bid amount 2].
I have various columns of data, a mixture of text and numbers, which all have data in them, and a few columns that have numbers or text. When I copy'n'paste-append into the Access table, the text in the sparsely populated columns doesn't copy across but the numbers do.
It works if I import the spreadsheet from scratch (don't want to do that however, that data comes from somewhere else and would require modification to suit), or if I sort the data so that the text is at the top of the column, it works. Don't really want to do that either as there are 5 columns that this applies to and performing a 5 level sort shouldn't be necessary IMO. It seems that the paste is analysing the data and deeming that it should paste as a number even though the column contains text. There are only 120 rows of data, not a lot! I've tried redefining the field as Long Text (currently Short Text) but it doesn't make any difference.
I'm trying to make a database to track inventory or several items. Basically, I have four tables:
1) RawMaterialList - includes a list of all raw materials.
2) PartList - includes a list of all finished product using said raw materials.
3) RawMaterialRecieving - contains details from each packing slip of incoming raw materials.
4) ShipmentRecord - contains details of daily shipments.
Each of these tables is fed by a form of the same name. I should note at this point that I basically taught myself how to use Access and I imagine I'm in the dark about quite a few things it can do. I've made several databases over the last few years, but I'm stumped at this point.
Here's my problem. In the form RawMaterialReceiving, I have several fields aside from basic information:
1) Item - a list of of raw materials from table RawMaterialList
2) Description - also dependent on info entered into table RawMaterialList
3) Quantity
But, I have 12 of these instances.
Item1, Item2...Item12;
Description1, Description2...Description12;
Quantity1, Quantity2...Quantity12.
My problem is I want to add up the quantities of each raw material and I'm not sure how to go about that. Lets say on May 13, I received 15pcs of Part A and 20pcs of Part B. I enter this information as Item1 and Item2 respectively. On May 14, I received 30pcs of Part B. I enter this information under Item1. Now I want to add up all of Part B (50 pcs). But Part B has one value listed in the field Quantity1 and one value listed in the field Quantity2.
Example:
1st Entry:
May 13
Item1 = PartA Description1 = PartA's description Quantity1 = 15
Item2 = PartB Description2 = PartB's description Quantity2 = 20
2nd Entry:
May 14
Item1 = PartB Description1 = PartB's description Quantity1 = 30
How do I get it to add up Part B to get 50pcs?
I am trying to obtain totals from two columns in the list box into text boxes on the main form, but my third argument is not working as expected.The source of one of the tex boxes is:
Code:
=DSum("Airtickets","T_Training_Participants.ProgrammeID=Me.lstParticipants")
I want to sum only amounts of the records that equal or belong to a selected programme (ProgrammeID) in the bigger list box above.
I'm trying to import a text file with 273 fields into two tables. I've been able to do this with the code I found on an old thread and I'm now trying to accomplish everything with one step. The file I'm importing is tab delimited text file. With this current code I'm only able to populate the first record in the table and then I get error message. (Run-time error '3265') (Item cannot be found in the collection corresponding to the reqested name or ordinal).
Code:
Public Sub ImportTextFile()
' to use the ADODB.Recordset, be sure you have a reference set to ADO
Dim rst As ADODb.Recordset
Dim rst2 As ADODb.Recordset
Dim strFile As String
Dim strInput As String
Dim varSplit As Variant
Dim intCount As Integer
[code]...
I was able to use the UNION ALL qry. But, when I have another file (like original2) that does NOT have all the columns listed in the UNION ALL qry, I get a Parameter value box asking for the missing columns when I run the qry.
Example:
original1IDDateGroupChristianJohnnySteve 18/5/2013A1528/5/2013B338/5/2013C2348/5/2013D2358/5/2013E5
original 2IDDateGroupChristianJohnny18/6/2013A212528/6/2013B2338/6/2013C2248/6/2013D22
The UNION ALL qry includes all the possible resources ( includes all the possible column fields Christan, Johnny, and Steve).
When I run the UNION ALL qry with the original2 file, An "Enter Parameter Value" box is displayed with the mssing column name "Steve".
Is there a way to Map the original2 table into a working table with all the columns, or use VBA code to construct the UNION ALL qry to only include the existing columns? My data has variable columns and I'm trying to avoid the parameter popups.
I'm looking for a way to have a text box auto fill based on the selection of a combo box on the same form. I cannot use the method i find all over the internet of using multiple columns in the combo box and basing the text box on that because the combo box already has multiple columns being used to determine its own possibilities and other combo box possibilities.
I would really just like the text box to work like this, but im still kinda inexperienced in VBA...
If combo box is "F004-001", then text box is "237"
If combo box is "F004-003", then text box is "280"
I know how to add in an "after update" thing, but i do not know how to do If/then statements.
I have a MS ACCESS 2010 database with a data table which i am trying to create a query from. I have 6 columns of data( one with an ID Field and 5 Name Fields). Below i have made examples of how it first appears as a simple query and the second will show you what i would like it to look like.
What the simple query looks like: [URL] ...
Second what I want the query to look like: [URL] ....