I found that a new table by name 'Name Autocorrect Failures' is appearinbg in my Objects window. I did not create this table. On opening the table, it gives infor as under
Object name - Form2
Object type - Form
Failure reason - could not open
Time
What is this? Is it anything todo with failure to open my form?
How can I hide the objects window on startup. I did it before witha command, but I cant remember how!
View 1 Replies View RelatedHey PPL...hows life???
i need some help here.... One of my forms has an age text box which is linked to a module ... so however, it calculates the age......
But the age is not shown in the table.... I need it to do that....
But i dont know which code to use... I heard of the INSERT INTO function
but dont know how to use it and under which event to put it....
my textbox in the form is named Age and the table is TblPatientDetails???
Please i need to do this urgently...
Thanx
I have previously posted a query similair to this which didn't get resolved.
I have two fields - Assessment and Score - the assesment field is linked to a look-up table that contains the assesment description and the score (ie if you are dead you score a 5)
Score then is =assessment.column(1) (in the control source).
On the form this works fine but in the datasheet view of the table - the assesment description shows up but the score doesn't. I think this has something to do with the control source setting but what other way can I do It?
I have drop down list linked to table included "agent names" , the names appeared normally in the form but not Alphabetic (A-Z) although the table was alphabetic .
View 1 Replies View RelatedI am having a problem updating a record on a table called BookInTable . The field I want to update is called Engineer and the record is found using the field Barcode. I have a form with 2 text boxes BarTxt and EngTxt as well as a button called SaveBtn. on the OnClick event of the SaveBtn I put the following code
Code:
Private Sub SaveBtn_Click()
If IsNull(Me![BarTxt]) Or (Me![BarTxt]) = "" Then
MsgBox "Please enter a value!", vbOKOnly, "Invalid Search Criterion!"
Me![BarTxt].SetFocus
Exit Sub
End If
DoCmd.RunSQL "Update BookInTable SET Engineer = " & Me!EngTxt & " WHERE BarCode ='" & Me![BarTxt] & "'"
End Sub
But this is bringing up the enter Parameter value dialog box for whatever I type into EngTxt. If I enter text into that box and then click okay it then updates to the record. how can I stop the from enter Parameter value dialog box appearing?
I am looking for an easier way to confirm that all a queries that are in a database are being used by the database. I started going through each and every one and it is taking for ever!
I have tried the documenter and either I cannot understand it properly or it does not contain the information that I am looking for.
An example might be I have a query called qryOne. I want to see where it is being used so I am looking for a “list” that says
qryOne = rptOne
qryOne = rptSix
qryOne = rptEightySix
Obviously these are just made up names, but I hope you understand what I am looking for. In essence a relationship table for queries, forms and reports.
Thanks for your help
Hi,
I have a parent window which upon clicking on a button will pop-up a child window containing a listbox. The listbox recordsource is a subset of the parent window. I want the user to select a record from the listbox which will load the selected record onto the parent window.
How does one pass argument back from child window to parent window?
From parent window to child window, I used
docmd.openform ,,,,,,[argument] and me.openargs in the child window
thanks in advance.
Hi all,Sorry if this has been asked before, but I've used the Search function and can't find exactly what I'm trying to achieve.The Current SetupI have a database that I'm now trying to expand upon by adding extra features. One of these features I'd like to add is the ability to, firstly, know how many records in the entire datasheet have not been officially closed (i.e. have their 'rmaclosed' column empty), and, secondly, to have a list autogenerated that shows all of these records and allows the user to double click an item from the list and have that record open.Now, to make life easier, I should point out that I already have a successfully working search function in my database. Clicking a button from the switchboard opens up a form that allows the user to enter full or partial text into a box, then, at the click of another button, the main window of the form will automatically fill out with a list of all those records which match the entered text. The user can then double click anything from this generated list and the appropriate record will be opened.Working on the assumption that the code for what I want to achieve would be near-identical to this search function code, I have replicated both the form and code, and am now trying to adapt it; it is this adaption I'm having trouble with.The Current SituationTake a look at the attached image. That is how my form looks to the user when opened.Now what I really, really want to achieve is for that central window to be automatically filled out with the listed column headings of any record stored in the table maindata that has a Null value in the column rmaclosed when the form is opened. However, I don't see any option for 'OnLoad', so I'm willing to compromise and just have the user click a button.You'll see the button there for 'List RMAs'. When clicked, that should populate the main window with the records that have not had their 'rmaclosed' column filled out. The code behind the button - which is where I'm having the problem - is as follows:Private Sub cmdSearch_Click()Dim strSQL As String, strOrder As String, strWhere As StringDim dbNm As DatabaseDim qryDef As QueryDefSet dbNm = CurrentDb()strSQL = "SELECT maindata.ID, maindata.rmanumber, maindata.company, maindata.rmalogged, maindata.initials " & _"FROM maindata"strWhere = "WHERE"strOrder = "ORDER BY maindata.ID;"'THIS IS THE BIT I'M HAVING TROUBLE WITHIf IsNull(maindata.rmaclosed) ThenstrWhere = strWhere & " (maindata.rmaclosed) Like '*" & maindata.rmaclosed & "*' AND"End IfstrWhere = Mid(strWhere, 1, Len(strWhere) - 5)Me.lstCustInfo.RowSource = strSQL & " " & strWhere & "" & strOrderEnd SubThis code has been adapted from that which - successfully - runs my filtered search engine. The problem is that my search engine runs a query based on text entered onto the search form by the user, whilst the form I'm trying to write should simply list every record in the main table, filtered according to the state of the 'rmaclosed' column.As I said in the opening paragraph, although it's not essential it would be really nice to have a counter somewhere on the form that would show the total numebr of records in the filtered list.
View 10 Replies View RelatedDear friends,
Can someone tell me how to hide menu bar and table overview window in MS Access 2000? I tried to do it but was unable to implement it.Looking forward for your answers.
Thanks
Hi there
I have a form that has 4 tabs on it.
When I add a control onto one of the tabs, The control is appearing on all 4 tabs.
What causes this?
Thank you for your help!!
Hi
I have a muli-user database that's been creating the odd strange record for me
two records that have been created have all the fields data as
#ERROR or
#DELETED
no matter what I do with these records I can't get rid of them or find out where they came from.
Can any help me just delete these out of the table?
Would be extreemly helpful as they are now getting on my nerves :-)
Cheers Homer
Hello everyone.
I use Duplicates Wizard to run about 14 queries which will show all possible combinations of duplicated records in an access table. Can anyone tell me how to add an extra column in reports 2 onwards displaying either a "yes" or a blank cell, being the answer to the question "does this record appear in any previous reports?"
Hope you can help.
Thanks.
So I have a Form (frmPositions) with a subform attached (fsubPosSkill).They are linked through Position ID frmPositions Record Source is qryPositionNeeds
Code:
SELECT tblPositionNeeds.PositionNeedsID, tblPositionNeeds.PositionID, tblPositions.Position, tblPositionNeeds.NeedsID, tblNeeds.NeedStatus
FROM tblPositions INNER JOIN (tblNeeds INNER JOIN tblPositionNeeds ON tblNeeds.NeedID = tblPositionNeeds.NeedsID) ON tblPositions.PositionID = tblPositionNeeds.PositionID;
It has two texts boxes on it [PositionID] and [NeedID]
fsubPosSkill Record Source is qryPositionSkills
Code:
SELECT tblPositionSkills.PositionSkillID, tblPositionSkills.PositionID, tblPositionSkills.SkillID, tblSkills.SkillName, tblPositionSkills.SkillValueID, tblSkillValue.SkillValue
FROM tblPositionSkills, tblSkills, tblSkillValue;
It has two combo boxes, cmbo1 and cmbo2.
cmbo1: control source is SkillID and Rpw Source is qrySkill
cmbo2: control source is SkillValueID and Row Source is qrySkillValue
when I open frmPositions, the subform shows only the combobox label in the header, there is no combobox that allows me to select Skill or Skill Value.
I want to display a message on a label superimposed on top of all objects if certain conditions are met when selecting a record in a listbox. The label is normally invisible and only made visible when the condition is met. The label stays visinble for 2 seconds using the timer event.
All that I cannot do is display the label on top of the listbox, it always sits under it.
I made a blank form, created everything on my form then added a header to put the title etc in and tried to view it using form view and the header isn't appearing. What do I need to change?
View 1 Replies View Relatedhow I get rid of the lines appearing in a report? I've set everything to transparent but the group header and subsequent records in the subreport all have separating lines.
View 7 Replies View RelatedCan anyone help please?I have a search form that passes 4 parameterers to a query. In the query builder it reads:Like [FORMS].[frmCourseSearch].[txtCourse] & "*" >=[FORMS].[frmCourseSearch].[txtStartDate]<=[FORMS].[frmCourseSearch].[txtEndDate][FORMS].[frmCourseSearch].[txtCourseID]This works fine. But I also want it to search on only 1 or 2 parameters and set the rest to Null so I have used this statement for each one. Like [FORMS].[frmCourseSearch].[txtCourse] & "*" OR Like [FORMS].[frmCourseSearch].[txtCourse] & "*" Is Null This again works ok and I can search on any parameter. However, every time I enter data into the search form and run the query it repeats the query string in the query builder. i.eLike [FORMS].[frmCourseSearch].[txtCourse] & "*"Like [FORMS].[frmCourseSearch].[txtCourse] & "*"Like [FORMS].[frmCourseSearch].[txtCourse] & "*"etc...It does this with all 4 parameters and it's starting to look very messy. The SQL view is the same with a new repeated line added each time I run the query.How do I stop this happening? Thanks in advance.
View 1 Replies View RelatedI'd like to directly print a report from a button on a form.
I want to click the button and the report just prints to my default printer without any other user interaction.
Currently the print dialog appears but I don't want it.
I have a single text box with a vertical scroll bar being used as a user guide. The Locked property is set to Yes so no user input can be made.
How do I prevent the blinking cursor from appearing?
I have a 2003 mdb which I have opened in 2010 from my C drive. If I hover my mouse over a table name it shows the original UNC path. How do I change this so I can view the data without an error message appearing?
View 1 Replies View RelatedI have made this database for a company that I work at, and I seem to be haveing some problems. I split the Database and placed the "'back-end" on the company's shared drive, however it seems that only when I log in as myself, on any computer, that it works. On other people's profiles, when a form is opened, there is nothing there, it is blank, no textboxes, labels or anything. However, if you use the database window to open one of the linked tables, you can see all of the existing data and cells just fine. I am only 17, and I have used Access for only two weeks, so I may have missed some setting in the splitting, or a database property that is affecting it. Please help me, as I need to finish this DB ASAP.
PS: the folder settings for the shared drive (at least as far as i know...) allow full access, so there should not be an issue there.
Thank you
I am having an issue with viewing a report. I have a button set up to show the print preview of the report. There is a chart based on the report's record source, and two sub-reports showing related data. The print preview section however shows the the chart area where it would appear is blank, i.e. there is a white area where the chart should go. There is no error message. The two sub-reports appear correctly. If I go to print the report, however, the chart appears, and it will also appear if I change the view type (e.g. to layout and back again).
View 7 Replies View RelatedAccess 2010
One of the Field Names in my table is titled ActionDeadlineDate, with Date/Time selected as the Data Type for the field. On one of my forms I have created a text box based on this field. Under Properties/Control Source for this text box I have inserted the following formula:
=[DateReceivedinADR]+40 Basically, this forces the text box to auto populate to a date 40 days beyond whatever date is entered in the DateReceivedinADR text box. On the form itself everything works flawlessly.
I have created a query that includes the ActionDeadlineDate field. However, when I run a report off this query it will not populate the date for this field. On the report this column is just blank, with no date indicated.
All other date fields I use on the form (at least those without an underlying date formula) appear as they should. Is there a way to make a date based on a formula appear on the report as well?
Hope I didn't make this too complicated. Maybe what I am asking for is not possible since a date formula is being utilized in the text box, rather than a simple date.
Before my registration form is submitted i have created a message box saying "would you like to submit?"
but it pops up as if it were to be an error message.. i will attach my coding and the pop up ..
I have been modifying an existing report that was formatting and printing fine but since I modified it (adding some text boxes and moving some controls around), it is now adding a blank page.
For example, If the report was normally 2 pages long with page numbers, it is inserting a blank page without page number between page 1 and page 2......