Access Chart Too Low Resolution.
Nov 22, 2006Is there a way to have the same printing options for a chart in access as in excel.
View Replies
ADVERTISEMENT
Can Form UseMicrosoft Excel Chart Instead Of Microsoft Chart Wizard
Mar 22, 2006Hi all,
I'm trying to create a chart in a form, this is not a problem, however, the chart types available are a bit limited compared to if i inserted a Microsoft Excel Chart object.
I'd do that except I'm trying to create a chart based on a query.
Is there a way to make the chart wizard use the Microsoft Excel Chart object as its chart creator so I have access to the chart types available in that object?
any assistance much appreciated.
thanks all.
regards
keji
Limit Chart To Date Range / Chart Isn't Updating
Jun 28, 2015I have a form with a chart , 2 textboxes for start date and end date and a button to filter the data( filter the data by date range) How do i continue from that? The chart isnt updating.
View 5 Replies View RelatedMonitor Resolution
Sep 20, 2006I just bought a new computer. It came with a GIGANTIC (for me) 19 inch monitor.
Here's the question. What resoution should I set the screen to?
I make databases for others.
If my forms are too big for their monitors they have to use the scroll bars all the time.
If my forms are too small it doesn't look professional.
Advise greatly appreciated.
Screen Resolution
Apr 4, 2005Is there a way a form can resize themselves depending on the screen resolution different computers use??
View 3 Replies View RelatedDatabase And Screen Resolution
May 15, 2006I couldnt find a search facility to see if this had been covered before, so apologies if it has been answered before.
I have created an application in Access (2002) which from the users side of things will start in a form and give them no access to the back end.
Unfortunately, it is entirely possible that different users will have their screens set at different resolutions and so the application will be unusable on some and too small on others.
I was wondering if it was possible for access to automatically resize according to the users screen resolution.
I have searched the MS Knowledge Base and help files etc, but I think it is looking less likely that it is possible. Creating 5 or 6 different versions for different screen resolutions would be a none option.
Thanks for reading.
Taker
Automatic Screen Resolution
Dec 8, 2006Hello,
How can I make my DB dectect the users computer screen resolution and adjust my forms and reports to it?
What is hapening is that is I make the DB on 1024/168 and than the user uses 800/600 the forms and reports look huge..... Is there a way to fix this automaticaly?
Resolution Requested - SQL Statement In VBA
Jul 14, 2004I have an Append Query that I developed and am wanting to use the SQL View statement in a piece of VBA code that I am writing. The problem is that it is not working.
Here is the SQL View when I am in Query Design View.
Code:INSERT INTO tblMasterAccountList ( AccountNum, AcctName, [Account Type], [Billing Spec] )SELECT TEMPAcct.Acct, TEMPAcct.Name, TEMPAcct.Type, TEMPAcct.BillingSpecFROM TEMPAcctWHERE (((TEMPAcct.Existing)=False));
Here is the code I have in VBA...
Code:Dim strSQL As StringstrSQL = "INSERT INTO tblMasterAccountList (AccountNum, AcctName, [Account Type], [Billing Spec]) "strSQL = strSQL & "SELECT TEMPAcct.Acct, TEMPAcct.Name, TEMPAcct.Type, TEMPAcct.BillingSpec "strSQL = strSQL & "FROM TEMPAcct "strSQL = strSQL & "WHERE (((TEMPAcct.Existing)=False));"DoCmd.RunSQL strSQL
The code runs fine in that no errors are generated, but it does not append the records. When I run the query outside of VBA, it does append the records. Is there something special that needs to be done with an action query for the SQL statement to work in VBA?
Org Chart In Access?
Jan 11, 2005Hello,
I am developing a database that requires the entry of multiple levels of corporate structure and would like to be able to show that structure using an org chart.
I know you can create org charts within Word, Excel or Powerpoint, but does anyone have any suggestions on how this might be accomplished using Access? I have searched the web pretty thoroughly and haven't come up with any answers yet.
I am not necessarily apposed to using an additional software package either, but I need to be able to supply it with variables from within Access and have it produce the desired result.
Any help or suggestions would be greatly appreciated.
Booger
Forms :: Export Form To PDF Resolution
Dec 4, 2013After a user completes a form, they click a button at the end that uploads the information the back-end database and creates a PDF copy using the DoCmd.OutputTo function. It has been working fine, but one user just had an issue where the form was very zoomed in and cut off. So I have 2 questions:
1) What is the cause of this problem? Is it based on screen resolution?
2) Is there a way to fix the problem to make sure it does not happen?
Changing Form Size According To Screen Resolution
Oct 13, 2005Hello this is my first post in the definetely best Access & VBA forum on the net and i hope i am in the correct forum to ask this.
I would like to know if there is any way in access to change the size of the for my users view according to their screen's resolution.
E.g. i am creting the form using 1280 x 1024 resolution and my users have 1024 x 768 resolution how go i make the form adapt to their res.
Thanks for any replies :D
Help Needed To Change Form Size/resolution
May 2, 2005I hope I can explain this clearly.
I have a subform that has a lot of information and I was wondering
if there is a way to make the subform appear as if one turned up the
resolution, thus making it's contents smaller, allowing me to pack more info
in it. I would love to leave the size of the main form alone.
I'm using Access 2000.
The sub form is currently displayed as datasheet.
Forms :: Text Box Layout As Per Screen Resolution
Jul 13, 2013I want to place a text box at the right bottom corner of a form. I tried but its position is changing as per moinitor sizes.
View 1 Replies View RelatedGeneral :: Fitting Form According To Screen Resolution
Nov 21, 2013I created a form which fits to my screen resolution. When I open it through an another computer which has different screen resolution then my form is opening according to my 1st screen resolution.
I wanted to fit the form resolution to the desktop on which it it opening. Is it possible?
How to set the form the screen resolution on which the form is opening.
Can I Create This Excel Chart In Access?
Aug 9, 2007Dear Access Expert
I am trying to create the Excel chart see attachments (ExcelChart.jpg) in MS Access but I don't think it's possible with the Access Wizard because it doesn't allow me to use more than one data field (step 2 in the Chart Wizard)
I created the Excel Chart using a pivot table in Excel with two data fields and they are graphed simultaneously
For the Access Chart I only managed to get the "Total Delay Series" and not the "Arrival Delay Series."
Must I use Excel to make this complex chart and link it to my Access form and if so can the chart still be dynamic? My intention is to set parameters using combo boxes and then create the chart on the fly. For example currently the user sees the series for the years 2004- 2008. I want to enable the user to be to have a choice about what years (range) they want to view.
THank you so much.
Forms :: Chart With Two Y Axis In MS Access
Jan 29, 2015i have two charts in ms access and i want to combine these two charts in one chart. do you know how i can have two y-axis in ms access charts with two fields for data area.
View 3 Replies View RelatedCreate A Column Chart In Access
Jun 4, 2012I am trying to create a chart in Access but havent done it before.
1). I have the following data:
Code
CountOfType
Month
Q
3
3/1/2012
K
1
2/1/2012
CDSA
1
2/1/2012
[code]....
2). I dont to create a chart where I am showing the transaction count (countoftype) in the Y axis and the code and bill_date in the Y. I want the chart to show the transaction by code and show what month it occurred. Would this be a crosstab query?
How To Create A Horizontal Line Across The Access Chart?
Mar 16, 2005Hi,
I have to create a horizontal across the chart whereby the y-axis value is 1500.
Can anyone help me?
Regards,
Dawn
Queries :: Access Chart Order By Count?
Mar 8, 2014I have a query that Counts the number of times a model number is used. I use totals and the count function under total to get that count. I have the top 10 models used and the query returns my information correctly but. When I make a form or report and place a chart in that uses this query, the results are in alphabetical order not in the order of usage. I need my chart to either go from descending or ascending order of usage and not by alphabetical order of the model number or name. What am I doing incorrectly? It seems like the chart would display the same way my datasheet would in the query.
Here is my sql statement.
SELECT TOP 10 Count(tbl_Closed_Jobs.OEM_Model) AS CountOfOEM_Model, [OEM] & " " & [Desc] AS Expr1, tbl_Closed_Jobs.Desc
FROM tbl_Closed_Jobs
GROUP BY [OEM] & " " & [Desc], tbl_Closed_Jobs.Desc, tbl_Closed_Jobs.OEM_Model, tbl_Closed_Jobs.OEM, tbl_Closed_Jobs.Plant
ORDER BY Count(tbl_Closed_Jobs.OEM_Model) DESC;
Reports :: Cannot Insert Line Chart Into Access
Sep 5, 2013I can not get a line graph inserted into a report by using the Wizard. I have 2 columns of paired data that I want to graph. I dragged the 2 columns to the "Data" control in the wizard and changed summarizing for both columns from "sum" to "none".
When I look at the report in Print Preview, the data points are stacked vertically in the center of the graph and the "Series" box displays what looks like the data. If I add a Date/Time column as the X-axis, I am told that I have to summarize the data, something I don't want to do.
I've made various selections using the wizard and all fail.
Reports :: How To Create A Chart In Access Report
Mar 11, 2013How can I create a chart to be added to the last page of an access report to summarize all the data reported?
View 1 Replies View RelatedCreating Report With Pie Chart In Access 2010
Nov 25, 2014I am working in Access 2010, trying to create a report with a pie chart. The pie chart is based on a query (called Count Pie) that calculates three values:
% IS
% NetInf
% IS + NetInf
I go into Create, Report Design and get a blank report in Design View. I select Chart from the Controls tab and follow the Wizard to specify the data source.
I get a pie chart with the right title (Count Pie). I double-click on the chart to open the report Datasheet and insert the correct value names. My pie chart in Design View looks correct. It has the right title and legend, and shows three slices of the pie corresponding to the three values.
I save the report, and go to Print Preview, where I get a pie chart that looks like a single circle; it has no legend, and doesn't show the three values.
Do I need to have the Access 2010 application re-installed?
Create Line Chart In Ms Access 2007
Feb 12, 2013I need to display the out put of a table as chart in ms access 2007. My table is as below.
ItemID
Week 1 Value
Week 2 Value
1001
87
5
1002
80
1
1003
42
1
1004
55
164
In the chart X co ordinate should be the "ItemID" and the Y co ordinate should be the week number (eg, week1, week2 ...etc). Is it possible to display the chart with the above table? Or do I need to transform the table and then dosplay as chart? Also can I transform the above table as shown below using a single Transform query ?
ItemID
Week
Value
1001
1
87
1001
2
5
[code]....
Access 2013 Chart Diagram Modification With VBA
Oct 17, 2014I would like to do two things
1.) pink arrow // I've changed the titel in a diagram with vba ... is there also a methode to move the position of the titel with vba ( left-center or rigth ? )
Private Sub Form_Current()
' KostenHinweis im Diagram
Me!Dia_WS.Object.ChartTitle.Text = _
"Preis: " & Me.[Roh-Preis] & "€/kg " & _
" Mindestbestand =" & Round(Me.MindestBestand * Me.[Roh-Preis], 0) & "€ ; " & _
" Maximalbestand =" & Round(Me.MindestBestand_Max * Me.[Roh-Preis], 0) & "€"
'Me!Dia_WS.Object.ChartTitle.Left ???
End Sub
2.) red arrow // maybe its because of the titel placement.I would like to change the size of a diagram with VBA code to have the diagram fit nicely to a given space best thing would be if there would be a possibility to resize the diagram in the given space
General :: Access Chart - Possible To Change Values On Axis Value
Feb 25, 2013Access charts know if it's possible to change the value axis values.
I create a chart getting values from a query I run, it plots the values but auto selects the value range and the increment.
The values on the value axis are : 0, 0.25, 0.5, 0.75, 1
Is there anyway I can get the values to increase by 0.1 rather than 0.25?
Modules & VBA :: Passing Date Strings Into Access Chart
Sep 11, 2013I would like the user to be able to select the months he wishes in case they want to look at calender year, financial year or just a custom group of months. If I use the wizard and pick dates say the start and end of the year I get the following code in the row source of the chart control:
Code:
SELECT (Format([DatePaid],"MMM 'YY")),Sum([TotalPaid]) AS [SumOfTotalPaid] FROM [Q_AllCust_Gross] WHERE ([DatePaid] BETWEEN #01/01/12# AND #31/12/13#) GROUP BY (Year([DatePaid])*12 + Month([DatePaid])-1),(Format([DatePaid],"MMM 'YY"));
So I decided all I needed to do was replace the dates in the above code with my own global varible which i would pass custom dates into via a form. Which I called getds() and getde()
Code:
SELECT (Format([DatePaid],"MMM 'YY")),Sum([TotalPaid]) AS [SumOfTotalPaid] FROM [Q_AllCust_Gross] WHERE ([DatePaid] BETWEEN >=#getds()# And <=#getde()# ) GROUP BY (Year([DatePaid])*12 + Month([DatePaid])-1),(Format([DatePaid],"MMM 'YY"));