Add Or Change Record Error Message
May 30, 2006
I am getting a "cannot change or add a record because a related record is required in table 'tblOrder'". I have scoured this site so forgive me if there is a post already on this.
My Order table has:
OrderID
CustomerID
SalesTaxRate
My Order detail table has:
OrderDetailID
PoNumber
TransDate
ProductID
OrderID
QuantitySold
QuantityReceived
QuantityOrdered
TransType
I wasn't sure if by this you could point me in the right direction as to why it is saying this. I am very new to Access so bare with me. Thanks
View Replies
ADVERTISEMENT
Feb 17, 2014
I have set up a simple switchboard that gives the user a choice of 2 forms. The second from allows the user to navigate through a questionaire for a particualar individual. I have set up some buttons to advance thru the questions and answers. When I reach the end of the dataset, I get the error message "You can't go to the specified record." I also get this message when I am on the first question and try to page backwards. Is there a way to change this error message to something more meaningful to my users - like "End of questionaire" or "Beginning of questionaire"?
View 6 Replies
View Related
Aug 14, 2013
How to control the below message to something like this through VBA:
"The Job: " & JobNumber & " already exists in the table." or to open an alternate form where they can make the change. Allowing duplicates is not appropriate for what I am trying to accomplish. I just want a friendly way of rerouting a user to understandable answer.
instead of this:
"The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again."
View 2 Replies
View Related
Jun 7, 2005
Not sure what is happening here...
I keep getting an error message saying 'No Current Record'...especially when trying to create a new form or report using wizard.
I don't have this problem at home..only in work.
Any ideas?
Cheers
View 1 Replies
View Related
Aug 3, 2006
By: Tony Hine (mail@TonyHine.co.UK)
Tel: +44 1635 522233
My profile on ecademy (http://www.ecademy.com/user/tonyhine)
I had a problem importing just one table I kept getting the message “Record is deleted” and no records were imported.
First I thought it may be because there were quite a few columns in the table so I tried importing just one column, however I got the same message “Record is deleted“ .
I considered it could be because the database was originally in a Company office workgroup. I wondered if the “Work group security” was causing the problem. I read up on this and found that importing the objects directly into a new database was one of the recommended ways of circumventing this problem. This was what I was already doing! So what was wrong?
Next idea, I exported all of the records into an excel spreadsheet. This was successful! So I then re-imported the records from the spreadsheet back into a table in the database.
There were a couple of problems, in that all of the text fields were converted to 255 character length. Although annoying I thought I could handle this problem. I proceeded making a few changes to this database, then I noticed that one of the fields that had been imported was originally a “Memo field” it had been converted to a text field with 255 characters. As soon as I noticed, I checked to see if any data had been lost by comparing this field with the original data. I found a significant loss of data so back to the drawing board!
All of the other tables had imported correctly, only this one seemed to be giving problems, I had tackled the size problem it was not a big table by MS Access standards, but I felt it could be the size, In particular the number of fields could be causing this error. But just trying to import one field at a time hadn’t worked?
Then it dawned on me what if I tried to import one record at a time --- that worked! So I wrote the query with a between statement I tried 10, then a 100, then a thousand records it worked fine! However when I tried 5000 records the error re-occurred?
I realized that I probably had some corrupt data in the table, so I set about systematically extracting a limited number of records until I found the area where the corruption was.
This worked but returned “0” records --- Between 11001 And 12000
“Between 12001 And 13000” Got error message “Record is deleted”
I got to 12800 all ok
12900 caused error
Error is in a record between 12800 and 12900
I will continue to whittle it down!
OK to 12819
The corrupt record is: 12820
I had found the corrupt record! Now all I had to do was create two queries one each side of this corrupt record to extract the information.
On inspection of this corrupt record I discovered that the memo field contained the following: “#Deleted “ I am going to attempt to modify the memo field and see if it fixes the corruption of the database.
My attempt at modifying the corrupt record, in particular the memo field containing “#Deleted” caused the error message to re-occur. “Record is deleted”
I have made a copy of the actual record 12820 and pasted it into a spreadsheet to send to the customer so that it can be checked in the existing data on their system.
Fortunately there were no related records in other tables affected.
View 1 Replies
View Related
Nov 16, 2005
:eek:
I have a query in Access which I have always updated no problem until today. I tried to update the usual fields and it says "This recordset is not updatable". Does anyone know why this would have changed and how I can get it back to updatable?
many thanks
FJ
View 2 Replies
View Related
Sep 12, 2005
Hi,
I get an error message when I add a new record to my database. It occurs when I open my form and use the [arrowright*]-button and when I use the switchboard button to add a new record using a form.
An error message is displayed, but when I dismiss the error (click OK), then everything seems to be normal and the record is added normally with the entered info. It is a bit annoying, though.
Since I have the dutch version, I'll try to translate the message:
"You can not add/append a value to this object
* The object possibly is a control-element in a read-only form
* The object is part of a form that is opened in the design view
* The value is too large for this field"
The error occurs right after I have typed the first character into a field on the form. The form consists of a few subforms. And I don't think any of the by access suggested errors have anything to do with this...
Any help is appreciated,
Thanks in advance,
MuFfiNimal
View 14 Replies
View Related
Mar 10, 2015
We developed a simple database that operates across a network at work (max 15 intermittent users). We split it into a front and backend and made it a .accde file format of which through a desktop short cut we all access. We are recently getting the error message Record is Deleted.
View 12 Replies
View Related
Jul 11, 2006
Hello all,
I try to delete a record and i get this error message "The search key was not found in any record". The key of the table is an autonumber but for some reason in these two records i want to delete has value = 0 .
Any suggestion how to delete these two records?
Thank you in advance!
View 3 Replies
View Related
Sep 28, 2004
I have created a command button through the wizard that is basically:
DoCmd.GoToRecord , , acNewRec
Well, it puts all this code in the event:
Private Sub NewVerification_Click()
On Error GoTo Err_NewVerification_Click
DoCmd.GoToRecord , , acNewRec
InboundQuestions!Page1.SetFocus
VerificationNo.SetFocus
Exit_NewVerification_Click:
Exit Sub
Err_NewVerification_Click:
MsgBox Err.Description
Resume Exit_NewVerification_Click
End Sub
Well, my PK field is one users enter in manually (please don't ask why). What I need is something that checks to see if the number in that field is a duplicate key, so I can tell users via msgbox "Duplicate Number, try again". Right now, it's not that descriptive, it says "You can't go to the specified record". I guess all i need is an If statment, but I don't know the code that checks to see if [field1]'s value has already been used in my table. Any ideas?
View 4 Replies
View Related
Jul 25, 2013
I need to be able to produce an error on a form where the user attempts to create a new user that already exists. The error needs to be produced when the save button is clicked.
See below for the existing code on my save button which exists in form, 'frmAddEditUser':
Private Sub cmdSave_Click()
If IsNull(cboManagerID) = True Then
MsgBox "Please select a manager", vbExclamation, "Details Missing!"
Me.cboManagerID.Requery
[Code] ....
Currently, if I attempt to create a user with the same Payroll ID as an existing user, my 'User details saved' message box is displayed and to the user it looks like a new record has saved successfully which isn't the case.
I need a message box to appear displaying something like "Payroll ID n already exists" where n is the 'PayrollID' of the duplicate record. (Is it possible to combine a value from a certain control and ones own custom text?)
Note: PayrollID is a combination of letters and numbers, i.e. two letters, followed by 5 numbers, e.g. JD12345.
For reference, the table/field and and control are called, '[tblUser].[PayrollID]' and 'txtPayrollID' (on 'frmAddEditUser') respectively; it is from this field and control that I want the error to be produced if the user is entering the same values which are existing in 'tblUser'.
View 10 Replies
View Related
Aug 6, 2012
I'm setting up a college database. On my enrollment form i have the following fields
Enrolment_ID
Student_ID
Course_ID
I'm receiving the error in my Student_ID field. It's telling me a related record is required in my Student Table.
The drop down shows the student name/date of birth/Education number
But if i set it to just show the ID it works fine, is there a work around for this as it will make life a lot easier for the dropdown to display the student names rather than the ID?
The dropdown is based on a query i have of accepted students....
View 2 Replies
View Related
Mar 31, 2006
Does anybody know what this error message refers to?
"Reserved Error (-1517); there is no message for this error."
It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.
the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)
The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.
If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.
-Thanks, Sean
View 10 Replies
View Related
Jan 14, 2005
Hello to you all, it's my 1st post here…
How can I change the default message (as you can see in the picture) that appear every time that I try to update my record?
I want to write something like "You Have to select a different Number"
And one more question, the message only appear when I'm pressing the record selectorbutton only after the user has already filled all the form) is there a possibility that I can write a code that will check for duplicate data immediately after the user typed it?
Thanks for your help
David
View 1 Replies
View Related
Mar 31, 2015
I would like to display message box in access VBA if the user forget to change the text box value after clicking the submit button. Example: 1 card contains 9 rows when they input the 7th row message box should come out "please remember to Change the card Number"
View 6 Replies
View Related
Jan 7, 2014
How to change the default message of Exist table. the message shows like as. I wanna change this. How can i will do this?
View 1 Replies
View Related
Feb 1, 2006
Hello All,
I have been developing my database all one seems to be well exept for an error message which is attched.
If anybody can help me trap this error or offer some advice i would be greatfull.
Alastair
View 6 Replies
View Related
Sep 28, 2005
While going to the design mode of a form, I regularely get the following message :
Microsoft Access can't run the macro or callback function 'fDesign'.
In my Dbase there is no macro with that name.
Can anyone tell me what this messages means and how to get rid of this thing.
Running Win XP, Access 2003 Sp1
View 2 Replies
View Related
Jan 23, 2006
I have attached a screen print of an error message I recieved on my access database. I finally got it to come up, but only after a few pop up boxes with this error message.
I do know the shared drive it is housed on went on the fritz. So I copied it and pasted it to my desk top. Grrr...I thought this message was due to the flipping shared drive. But now, I recieved it on my desk top too.
Anywho...can someone look at it and tell me what it means.
Thanks alot.
PS, i know my desktop has to much stuff, so don't go there. ;)
View 2 Replies
View Related
Apr 3, 2006
Hi can anyone help i keep clicking on a qry and it comes up with this message "Syntax error (missing operator) in query expression 'tblSTSLimits.Max Short'. but Max Short is correct can anyone help
View 1 Replies
View Related
Aug 9, 2006
Hi all,
I face a problem while openning a form.
It gave me this error message:
The expression On Load you entered as the event property setting produced the foolowing error:
User-defined type not defined.
What to do?
Sorry for bothering you.
Thanks & Regards
Mark K.
View 3 Replies
View Related
Aug 23, 2006
I get an error message when I open access 2003 database "database contains a missing or broken reference to the cacview.ocx version 1.0
All help so far says to go to tools>references.
My tools in the help menu does not have references
anysuggestions
View 1 Replies
View Related
Oct 9, 2006
I have a table that keeps crashing. The only error message I get is "Invalid Argument". Each time, a single record will turn into "#Error". Each field says this in the row. When this happens, Access won't let me delete just that row,
Any ideas how to delete them?
View 2 Replies
View Related
Jul 11, 2005
I am getting the following message:
"you tried to execute a query that does not include the specified expression qryMaxDays.Days Between 0 and 50 as part of an aggregate function."
I have other queries just like this and they run with no problem. any ideas? :confused:
SELECT Count(qryMaxDays.Days) AS [Number Of], qryMaxDays.Days
FROM qryMaxDays
GROUP BY qryMaxDays.Days
HAVING (((qryMaxDays.Days) Between 0 And 50));
View 1 Replies
View Related
Mar 6, 2006
I am trying to Right Join two queries which are basically from the same exact table, but when I do that I get the following error.
ODBC--called failed.
[Microsoft][ODBC SQL Server Driver][SQL Server] The column prefix 'MS1' does not match with a table name or alias name used in the query. (#107).
The following is a copy of my SQL
SELECT PqryExpiredPolicy.Policy_Number, PqryExpiredPolicy.Orig_Exp_Date, PqryExpiredPolicy.Insured_Key, PqryNewPolicy.Policy_Number, PqryExpiredPolicy.Name
FROM PqryNewPolicy RIGHT JOIN PqryExpiredPolicy ON PqryNewPolicy.Insured_Key = PqryExpiredPolicy.Insured_Key;
I have looked for this MS1 and cannot find it. Any ideas where I should be looking or what this means?
View 3 Replies
View Related
Jul 21, 2005
I get the following error message when I open a form, but I cant see anything wrong:
Run Time Error '2447':
There is an invalid use of the . (dot) or ! operator or invalid parenttheses.
This is the code that causes the problem:
Private Sub Form_Activate()
If Me.SumOfTotalGVS > 16 Then
MsgBox "You have exceded the total amount of GVS on the CATT site"
Let Me.SumOfTotalGVS.BackColor = 255
Me.SumOfTotalGVS.ForeColor = 65535
Else
Let Me.SumOfTotalGVS.BackColor = 16777215
Me.SumOfTotalGVS.ForeColor = 0
End If
End Sub
View 13 Replies
View Related
