I am an extreme newbie to Microsoft Access and I've created a basic form for entering data about employees for a future review process. I have a Date field which I would like Todays Date (the date the form is filled out) to appear, however I cannot get it to work. I am not sure where to put Date( ) or todays date in order for it to automatically appear when a new record is started.
Thank you to anyone who can help me out with this...
~Jen
I am building an Access database for a client. It is an employee staffing database. With that being said they would like the ability to automatically populate the "T2PPCD" date field based on what is entered into the "Report Date" field. (Same table)
The date is the Monday after 180 days from the report date.
I already know how to get it to auto fill 180 days from the "Report Date" but I'm not sure how to tell it to give me the Monday after 180 days.
I am building a database to track contract of employees so that I can know which contracts are valid and which are expired.
My table has the following fields:
ID (Primary key)
Employee ID (Foreign key to link to the employee table)
Start_Date
End_Date
Status (Either valid or expired)
Challenge
I want when I enter the end date, the system checks the end date against the current date and fills in the status field with either valid or expired as appropriate. For instance if the contract end date is March 10,2016, the status must be filled in the word valid.
We use access to enter our service tickets in at work.What we have are three date fields.
Call Date
Start Date
End Date
We are 24/7 operation.Currently all 3 just autopopulate with the current date.What i would like to do is ADD a CHECKBOX next to each Date Field.And make it work like this.
1. let them autopopulate as they are currently
2. if you end the call AFTER MIDNIGHT (the next day). CHECKING the box would automatically populate yesterdays date in each of the fields that has the check box CHECKED
I am new to using ACCESS. I have a database that has several tables which generate forms for my office to print for client files. I have these forms set to print based on a query that will only pull the ones that have a form printed field not selected, if that makes sense. What I would like to add is a field right next to the form printed field that allows us to enter the date the form was printed. I have added this field but now would like to take it a step further and have the date automatically fill once the form printed field is checked.
View 1 Replies View RelatedIs it possible to automatically update a date field in a form record without ever clicking in to that date field, but only because you have altered something else on that individual form record or an embedded, linked subform record? eg1. Staff details record - a) create a record for Bob Smith and 'Last Updated' field automatically inserts date b) amend record to say 'Robert Smith' and 'Last Updated' field changes to show new date, even though you never touched that date field. eg2. Risk register - main form record contains name, details, and 'Last Updated'; embedded subform allows you to add individual records of actions taken for each risk. I want the 'Last Updated' field to update each time I add an action, without amending the 'parent' risk record.
View 10 Replies View RelatedI have a database of personnel. People come and go all the time; however I can't have a personnel record deleted as soon as they leave. They remain on our books until a specified date for each individual. The date is different for each individual. I was hoping to have a field in their record with the date, and have a query or some code delete that record on the date in the field. Is this possible?
View 7 Replies View RelatedI would like a date field I have set up to auto populate the current date when I click on another field to enter information.. how would I do that?
View 5 Replies View RelatedI need to autopopulate a field with now datestamp when another field has been filled in?
View 10 Replies View RelatedOn my form have a status field with about 7 options to choose from a combo box, i have these values set in another table. What i would like is for my other field, which is a date, to automatically change whenever the status field is changed. So i know how long ago the status field was set. So basically if i change the status to complete i want the date to then set the date and time now.
View 5 Replies View RelatedFirst hurdle in my database tables, I have a field called Date_Created which I want populated just once, whether from a form or an import.
I have another field called Date_Updated which I want to update any time the record is changed. I know I can do this by using the default value of Now(), but how can I get the Date_Created field just to update when the record is created and not any time after ?
I also want to show these values on the form, but have them as view only, hoping that is possible ?
I am new to Access and have started to move across some Excel based programs.
I have a simple example with two tables and a form where on the form a customer ID is entered which displays the name and below it is necessary to enter the total payments made by that customer for the day ( all records for the same day are entered at one time, which is why I would like to autofill the date).
I can enter the date directly on the form for each customer entry but I would like to automatically enter the required date in the payment table using the value of a datepicker on the form to ensure that no date errors are made.
I have been trying to use the expression builder to do this but the datepicker does not seem to appear as a valid option.
Greetings everubody,
I've a problem and hope to get answers for,
The situation is that I have a table named patient and a form named [patient1] where it holds a textboxs named "MFC_Seq_no" and another to hold [date], now, I manged to do a manual auto numbering for "MFC_Seq_no" using the following VB :
Private Sub Form_Current()
If Me.NewRecord Then
On Error Resume Next
Me!MFC_Seq_no.DefaultValue = Nz(DMax("[MFC_Seq_no]", "Patient"), 0) + 1
End If
Whenever user create new record, the system will automatically store the next number in the new record.
Now, I've be requested to code that system to start again from 1 as value for "MFC_Seq_no" whenever there are changes in date field (i.e. next day in the date field)
Is this doable and how?
Q2. how to duplicate an entire record with a subform, from another table, in it?
Thanks,
I'm currently building my first database for a research project. When we enroll a participant, we need to have an enrollment date/time as well as an activation date/time (and they are not allowed to be the same because, rules). I was able to figure out how to auto-populate the current date/time when we've marked a person as enrolled. What I'm wondering is if it is also possible to auto-populate another field with the date/time, ten minutes in the future?
View 3 Replies View RelatedI have created a basic Volunteer Events and Hours Volunteered tracking database.
I created a form Volunteer Hours to allow an end user to use that form to record the volunteer and hours volunteered on a specific Event. There are two tables needed in the form Volunteer Hours to be used for the end users to record the Event, Volunteer, Date and Hours. The form has drill down fields from two tables:
Table A - Volunteer Events (event name, date, descr, owner, co-owner, loc, status)
Table B - Volunteers (name, co, div, emp#,title)
I want to be able to select the Volunteer Event and have the event date automatically populate in the Volunteer Hours form date field when the Event is selected to eliminate the end user from having to enter the date in.
Also; I would like to be able to add more than one volunteer at a time to an event on the form, this would also decrease the data entry time.
Are one or both of these things possible?
I think my question is fairly simple - fingers crossed.
I want to create a field that, whenever a record is added, it auto-adds the date & time the record was created. I'd call it Book_Date_Added, or something like that. I tried snooping around the Default Value options but couldn't figure it out.
The table exists and it already has some records, so I'd need to know how to add this field rather than how to create it when I create a table (although that would be helpful too, if it's somehow different).
I'd appreciate any help, thanks a bunch.
I have a database to track temporary decertification's. I have the expiration and max dates calculated out from the original dates at the top of each box. The temp expiration date is calculated by adding 267 days from the first date . When we enter an extension, the new expiration date is 30 days from the extension date. My question is, how can I make the expiration date update when a new extension is put in.
For ex.
Temp Decert Date: 05 Dec 2014
Temp Decert Extens 1:
Temp Decert Extens 2:
Temp Decert Extens 3:
Temp Experation Date: 31 Aug 2015
Max Temp Date: 04 Dec 2015
how can I make the expiration date update to go 30 days from what is in the extens field 1, 2, and 3 (respectively) instead of 267 days from the original date?
So I want it to look like this after updating a field
Temp Decert Date: 05 Dec 2014
Temp Decert Extens 1: 30 Aug 2015
Temp Decert Extens 2:
Temp Decert Extens 3:
Temp Experation Date: 29 Sep 2015
Max Temp Date: 04 Dec 2015
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
View 8 Replies View RelatedI create a database through ms access and there have a birth date box and admission date. Another box for Age.I want to see the age in month or year figure in to the age box when I go next field. Which will be calculate from admission date to birth date.
View 1 Replies View RelatedI've just returned to work after kids and started managing a large Access database related to health, back-tracking over many years.
Currently in filling a form we physically enter:
Apples 2.2
red apple 2.4
red apple cut 2.45
Oranges 5.6
Cucumbers 8.5
Is it possible to get field 2 to automatically fill with a number code due to the text typed in field 1?
FWIW, I'm confident at more basic Access e.g making follow on default value = Dlast("field""table") type stuff but the more complex stuff I haven't touched since Uni over a decade ago and you will need to be gentle while I blow away the cobwebs
Within my table if Field 1 has an answer of Self (from drop down), then, I would like Fields 6-12 to auto populate; however, if Field 1 does not have an answer of Self, then leave Fields 6-12 blank.
I am not quite sure how to lay this out. I am using Access 2010.
Good day all. I am very new to Access and have a question ref date/time. I would like to have two fields fill with the "current" date/time when a user clicks on the empty field. Any help would be great!! Thanks all and take care.
View 2 Replies View RelatedWhen The User Checks The Option Box True I Want Todays Date To Display In The Date Feild.....any Help Or Do U Need More Info
View 1 Replies View RelatedI'm creating a database that keeps a track of questions and scores.
The questions in the database need to be dynamic and are changed frequently.
I have a scorecard table which keeps a record of scores and the applicable question at the time the record was saved. I need to do this because in 6 months time we may want to provide feedback. As the question may have changed we need to be able to refer back to what the question was.
I want the question field in my scorecard table to populate with the value in my question table.
I have tried a number of things including setting the question field in the scorecard table to a lookup based on the following query:
SELECT tblQ1.Q1
FROM tblQ1;
This works however only as a list or combo box. I don't want the user to have to select the question. I want it to auto populate, is this possible?
I (will have) a form which a user fills in to enter new data.
I have two fields,
"Branch" and "Branch ID" (Branch ID will not be on the form, just in the table)
Branch will be fed by a combo box with seven choices. I would like it so that when "Branch" is populated it autopopulates Branch ID with a code which relates to the branch, so for example
BRANCH BRANCH ID
Braintree BRA
Colchester COL
I am creating a database tracking physicians and their contracts. I currently have two tables: PhysicianT and ContractsT, with corresponding forms to enter information in them. I have an issue with the Contracts form; I want to be able to select a physician from a dropdown list (looked up from PhysicianT) and have Access autofill their Physician ID #.
PhysiciansT looks like this:
physicianID (AutoNum) name (Calculated)
1 Barker, Bob
2 Burgundy, Ron
3 Stark, Tony
Upon selecting Barker, Bob from my dropdown list, I want "1" to appear in the Physician ID # field in my Contracts form.