I am trying to create a form from questions listed in a table, add a yes/no column to it and then have it auto populate a data sheet with the question and the answer. how I can have the datasheet autopopulated?
View RepliesI have created two tables. One table list of 100 Categories that I monitor each month. The Categories are never changing month-to month, however, each might be associated with a different client month-to-month. Presently, I am manually typing in the Client information month-to-month with information pulled from the Client's table. The Client's table has a Category Field which is populated when a Client has purchased space to use it.
In essence, I have the Category Table (Fields: Record Number; CategoryName; Client Name; beginning date the client will use the Category and Ending Date the client will stop using it). The Client's Table has a lot more fields/information but it still has the same fields as the Category Table. I am trying to be able to use the Category Table and have it automatically populate with the client who is using the Category at that time. Any Category not being used by a Client then the Query should write "Open" in the Client's name field. I have tried many different scenarios but can't seem to get it to work. I must see all 100 Categories each time I run a report. It doesn't have to say "Open" but where ever a client did not use the Category it should be left blank.
Sorry for posting into another thread about this, but here's my problem:
Hello All. Finally getting my pride out of the way and asking this. I've searched and this is the closest question pertaining to the problem I'm having. I have created a form to populate a table in Access. I've created Lookup fields for parts of the table that will get data from another table/tables. I want a certain part of the form to auto-populate data based off of the last name I put in the initial Drop-down box. Say, I have a person with a last name (and there are several with the same last names), I want the remainder of that line in the form/report to populate with his/her data needed for the form letter. Unfortunately right now, I have it where we have to select each from a drop down menu, for both last names, first names and other data needed. I've tore my brain up trying to figure out how to link the data in each one of the combo boxes to the first combo box. Any help would be appreciated. These are driving me nuts as I should be able to figure this out and it's just escaping my vision I guess. Thanks in advance for the help.
I know auto-populating has been asked before for forms, but I am looking to auto-populate a couple of fields in a table based on an ID Number that corresponds to another table. I realize it is not the best practice to duplicate data in a DB, however, I am using an ID card program that requires tables to populate the ID card information. My hope is to have two separate tables for 2 versions of ID cards.
The first table is called Firefighter info with fields of ID Number, First Name, Last Name, and Firefight Certs, EMS Certs, and emergency contact information. The second table is called EMS Personnel with fields of ID Number, First Name, Last Name, EMS Certs, and other fields that will be entered manually. I would like the First Name, Last Name, and EMS Certs fields to auto-populate in the EMS Personnel table when the ID Number is entered. I have a relationship already listed between the two table that links the ID Numbers in both.
The Firefighter Info contains the information for all members of the department, regardless of whether they are EMS, or strictly firefighters. The EMS personnel table contains information strictly regarding to the EMS members. Thus, the ID number you are entering into the EMS table will always correspond to an existing entry in the Firefighter Info table.
I have the following tables:
Inquiry (This is the main table I want to populate through the use of a form)
Programs
My question refers to two columns in the Inquiry Table
Program
Group
The program column is populated by a drop down menu that is linked from a programname column in the Programs table.
I I want is the Group column in the Inquiry table to autopopulate based on the selected programname (There is a group column associated in the Programs table) so the form field will be autopopulated.
What I have tried is autopopulating the form (form name is Inquiries) Field called Group by using =[Program].[Column](1) in the source code of the text box. This works well, but it then does not populate the main table.
I need to either
- Learn how to populate the main table column called Group based on the form autopopulating
or
- Learn how to autopopulate the column Group in in the table so the form will autopopulate
I’m fairly new to Access so I hope I can get the terminology correct. I’ve been working on creating a database which has a one to many relationship. With the help of the people in the table forum, I do have that working correctly, and even have a form and sub form where the data can be successfully input.
In short, I have a main item table to track my widgets. I have a reference or look up table of colors. Third, I have a relationship table that manages the one to many relationship. My main input form has all the fields that need to be plugged into the primary table. The Sub-Form is setup for continuous forms which allow me to input as many colors as I need. Again, this all works great.
Now, to go to the next level. There are times when I want to select many (lets say 8) different colors to my widgets (kept in the primary database and form). To select each all 8 colors each time is somewhat of a pain. It is my hope and intent to create a button on my sub form that would populate my subform with the static 8 colors that I want, thus bringing me down to a single click instead of 16. (1 for the drop down, 1 to select the color).
Is this at all possible? If so, can someone give me a shove in the right direction?
Structure as follows:
TblWidgets
•Widget – Text
•Value – Numeric
•Description – Memo
•Type – Text
TblColors
•Color - Text
•Description – Text
TblWidgetColorRelationship (one to many relationship)
•Widget – points to primary key in TblWidgets
•Color – points to primary key in TblColors
Thanks,
Joiry
I actually have two questions.
1. I was reviewing the Access 10 commandments and I wonder why using "lookup" is evil?
2. I am working on a db which contains approximately 14 tables. One is tblMaterialslist which contains the following fields:
ID - Autonumber
PartDescription - ShortText
PartCost - Currency
Size - ShortText
Additionally, I have a form in which I would like the "PartCost" field to auto populate when the "PartDescription" field is entered.
I'm using a combo box to pull data from a table to auto populate the fields on my form. But for some reason, it stops inserting the data after city (column(6) and I can't figure out what's going on. When I run the query the data is there, if I change the order of the columns, the data shows. Here's the code:
Me.txtadjusterfname.Value = Me.cboAdjusterlkp.Column(0)
Me.txtadjusterlname.Value = Me.cboAdjusterlkp.Column(1)
Me.txtadjustertitle.Value = Me.cboAdjusterlkp.Column(2)
Me.txtadjustertype.Value = Me.cboAdjusterlkp.Column(3)
Me.txtadjustercompany.Value = Me.cboAdjusterlkp.Column(4)
Me.txtadjusteraddress.Value = Me.cboAdjusterlkp.Column(5)
Me.txtadjustercity.Value = Me.cboAdjusterlkp.Column(6)
Me.txtadjusterstate.Value = Me.cboAdjusterlkp.Column(7)
In case my other question cant be resolved, I'd like to do a work around, but dont know how to do that either.
So, I have a form (Photos) with a field (PhotoTitle) and in the form is a subform containing a continuous form a (Sales).
This form contains invoiceno, location, customer etc... but also PhotoTitle field.
I've been trying to get it to populate based on a relationship and use that data elsewhere, but cant, so I'd then like it to.. on enter (or focus) automatically populate with the value from the main form (photos), phototitle field and put it into the sales subform phototitle field.
What is the code for doing that?
Thanks!
Hi there,
I've been working on this issue for quite sometime. I've tried different methods, such as the DLookup function, but I think I'm doing something wrong. Let me explain what I'm trying to do:
This is a Work Order, the user will Select a Customer (Table Customer: Contains CustomerID and Customer Name, address, etc) from a drop down box. When they do this, I have another textbox which is designated for the Address. I would like the address to automatically populate. but its not quite working. I've tried it with the DLookup function (I entered it into the control source of the textbox). I entered the following syntax:
=DLookup("Address","Customer","CustID=" & cboCustId)
It keeps coming up with an error. I have no idea why.
Now this is just the first half. The second half I have a subform on the same main form, which lists the equipment they have on their site. The database has a number of customers with many equipment for each of them. How do I make sure that the subform only populates equipment associated with the Customer that was selected on the main form?
I hope someone is able to help me.
Thanks a lot!
Hi,
I have a form with various list boxes that display options based on a query. When options are selected the text relating to them is populated in a seperate text box at the side.
The problem im having is when I select options from the list box I want it to store the selected options in the table that holds each record when the form has been filled out and submitted. At the minute it populates everything into the table apart from the options selected from the list boxes.
Does anyone know how to do this?
Thanks in advance
Edit: I have got the control souurce of the list boxes set to the correct field in the table.
I hope you can help - I have two simple problems and one slightly more complicated problem (bearing in mind I'm quite an Access Novice!)
Problem 1.
I have set up a simple form for a Timehsheet where the user can select a project and then enter hours worked in 7 text boxes for Mon-Sun. Then I have create a Total Text box at the end of the row. I need the Total box to Sum up the hours from the 7 boxes dynamically. How does one do this?
Problem 2.
How do I then ensure this calculated field populated the field hoursID in tblHours? (I am able to do this with a normal field, but with a calculated field, doesn't the formula go into the Controlsource field??)
Problem 3.
I plan to put this form as a sub-form into a main form 4-5 times so that a user can select 4-5 projects to enter hours against. I would like to have a SUBMIT button on the main form, so that all the calculated hours and selected projects populate the respective tables ONLY after this button is pressed.
Can this be done?
Thanks in advance!
Sunil
I am trying to create a main form that selects a series of values allowing the user to enter new data or edit current data (using other forms). I have a series of cascading combo boxes that populate accordingly and become visible after update. I can successfully create the series and add new data and edit data as in my code.
How to populate the junction table from the forms so for example when editing or adding a new site it not only populates the tblSites and the tblSitesContacts it also populates the tblClientSitesJunction with values from the frmSites and also cmbClients. If I use the wizard and try and add values from all 3 tables to form it doesn't work and I am not sure how to add the ClientID and SiteID manually to frmSites.
I have attached a copy of my database :
Attachment 4334
Hi all ... been awhile since I have had to create a database so I have gotten a little rusty. :eek:
I have a form where some of the fields I have formulated to calculate an amount. Example... =[GrossAmt]*[FeePercent] This is calculating into the form correctly but not writing to my table for that field. What am I doing wrong or missing here?
I'm building my first Access DB for a while, so am a little rusty, but I can't seem to work out this problem.
I've bound my form, and all of the other fields are saving and populating the correct table, but I have two combo boxes, both of which populate a series of other text boxes based on the selection (eg. I select Joe Bloggs in one box, and it automatically puts Joe Bloggs' phone number and email address in two following boxes).
This all works, however when I save the record, or move to the next one, the data entered in the combo boxes and the related populated fields doesn't save - they just show up as blank in the record created in my table.
As an aside, how do I get the combo boxes & related text fields to show a default blank value until a value is selected.
I have an infopath form, which people in my company can fill out to order parts. The form is linked to an Access database. The primary keys for the database are the Order Number and the Line Number (where the specific part info is in the system). The form also takes info about who entered the order, when they entered it, etc.
My problem is that while the form will be used for only one order, it may be used to order multiple parts. So the infopath form has a repeating section with a table where they can enter multiple line numbers and part names, etc.If I use the form to enter just one part, everything works great. But when I use the repeating section to add multiple parts, the information specific to the repeating section is added to the database but the rest of the information (who entered, when the entered, etc) isn't.
My intial idea was that since the first part is entered correctly and the subsequent parts are missing some information which is already in another line in the database. Maybe if there was a way to pull the information from another line into the lines with missing info within access would solve my problem. So basically automatically populating the rows with matching Order Numbers with the information that is missing.
I have a combobox on my form with fields related to it (ie. when an option is chosen in the drop-down, the next two fields are also populated with data based on the selection made - I know this is duplication of data, it's just the way the 'powers that be' wanted it. I'm changing it in my next version of the database!)
The two fields that are populated as a result of the selection in the combobox are migrating into the related table fine, but the actual selection in the combobox isn't - it's showing up as blank in each new record in the table.
how to auto populate list box based on two dependent combo boxes.
View 9 Replies View RelatedHello everyone
I have read the FAQ on cascading combo boxes and have managed to apply the theory to my DB's data input form (frmDataEntry) which is very cool and prevents a lot of errors however in doing so it no longer populates the underlying table (tblProductionDetails).
I am at a loss as to how to correct this as you can see from the example I need the customer and description field to be populated with the correct data rather than the fields I am using to make the cascading combo boxes work.
Any help would be greatly appreciated
Regards
Adrian
I've been trying to populate a field in a form with information, but only if the field is blank.
What I am trying to do is this.
I have a continuous form displaying all of our principals, however when our principals are on leave I want to populate the field with the "acting principal". I have set it up so the field grabs the acting principal first but it is blank for several schools. For these schools where there there is no "acting principal" I want it to grab the substantive principal automatically and populate the field.
I have tried Is Null, Is Not Null, NZ, IF, Where and Then statements but to no avail.
Hi All!
I'm working on a Personal Information Database.
I want my system to do the following whenever I
enter a person's ID:
If the ID is already entered before, I want all
the personal info fields to be populated with
the person's details.
If the ID is not entered, then I will enter all
the person's details.
Any help will be very much appreciated!
Regards,
CS.
I'm trying to populate a listbox from a recordset. I will explain what I'm trying to achieve.
I have a (continuous) form with some data from a table. On the form header I have a listbox, showing all (distinct) customers from that form.
The user is able to do some filtering. That all works great. But I want to populate the listbox with ONLY the customers on the form AFTER filtering.
One way I thought might me the solution was using RecordClone. But I'm stuck there. It must be something simple for an expert. I'm not entirely a newbie, at least not to VBA. Is there an easy way to refer the listbox' recordset to the actual recordset on the form?
I'm making a customer survey database. Also be aware I'm not proficient with access.
All the customer information is being imported from an excel spreadsheet. That will include ServiceRecordID, ServiceDate, TechID, CustName, ServLocation, PhoneNum, and DeptID.
Another table will include records for answers to 5 questions that will be asked by a manager on the phone. That table is called TblQuestions. This table will also have ServiceRecordID to go with the answers.
What I'm trying to do is create a Form that at the top has a box for ServiceRecordID. I'd like to be able to type in the Number for that ID, and then all the information shows up on the form for that specific ID. And below all that, fields to add the answers to TblQuestions for that specific ServiceRecordID.
The reason I'm doing this is because the manager will get a report with the customer information that needs a follow up call. So I want them to be able to call up that information on the screen with the ServiceRecordID number, and also be able to add in the information that they get back from the customer with the questions that will be asked.
I don't know why I'm having so much trouble with this. But I'm not experienced with access or VBA both.
Hi, I was wondering if anyone could help me.
I have a simple database, consisting of two tables and one form. I'd like the form to display information mainly from the first table (table 1). For this, I have used the Form Wizard, which works well and displays as it should. My problem comes when trying to display data from table 2, without using the Form Wizard.
I have a simple field called 'Number' in 'Table 2'. I'd like this value displayed in a text box along with table 1's data. I've tried using the expression builder, which gives me something along the lines of:
[tbl_Table 2]![Number]
But this is displayed as:
#NAME
...when I open the form. Could anyone explain how I do this correctly please? All I'm trying to do is display data from other tables in the form.
Any help is much appreciated.
I have created a form and a subform within it, I have managed to populate all the dropdown boxes from the tables I need. but I need to save all the information in putted to a table called bookingstbl and I do not know where to begin?
View 6 Replies View RelatedMy friend is looking for the database to auto populate a date, based on information already entered.
A Learner Starts his/her private tuition lessons on dd/mm/yyyy and pays for 6 weeks, the next lot of payments is due on dd/mm/yyyy...