I'm trying to create a form where there's a textbox based on a query that will bring up whatever values are typed in the textbox into a listbox. How do i base the textbox no the query? I see Control Source...is this where I put that in? I'm a very beginner in Access.
View Replieshi
I was wondering how you would base one query on the result of another through the same form. I need them to all be under the same command button... i.e. on click run 1st query and then run the second on the results of that query.
How would i go about this, would it have to be a make table query?
Thanks in advance.
Shapman
How to update unbound textbox on main form from unbound textbox in subform afterupdate.
that is when amount paid is updated it automatically updates total paid, balance etc.
Hi: There are two textboxs in my main form. One is bound and another is unbound. There is no entry in the unbound textbox as values come into automatically after entering some information in the subform. My question is how to i pass values from unbound textbox to bound textbox every time when the value change in unbound textbox i need to change the value in the bound textbox. When the form load there is already value in the bound textbox which i want to override based on the values from the unbound textbox.
Thank You.
I have a date textbox (Week_Ending) and number textbox (Staff_ID) in a form (frmHourEnter), when both have values I open another form (frmStaffReport) with textboxes (txtDateStart and cmbStaff).
How do I open the second form with the values of the first form pre-entered?
I have a database for billing. In my database, I have a form that consists of a main form "Order" and 2 subforms "OrderDetails" and "Customer" OrderDetails are to enter the products to be connected to the Order. All function super, but I want to have some information from one of the forms "copied" over to on of the others.
Here is what I would like
In the subform "OrderDetails" I have made a textbox that summarize all prices to a total, his tekstbox i called "Tekst31". I would like the amount in this textbox to appear in a field "Bel�b" in the main form "Order".
I have tried some different commands, but nothing has worked, also I have made a query which dose the same ting as the tekstboks, as the information in that tekstbox it not stored anywhere.
Hi there,
I usually code in .net or asp, but am building a system in pure access.
I want to do the following from a textbox on a form....
1) Lookup all values in a table that match textbox.value *
2) lookup all values that matach * textbox.value *
I want to display the values that match textbox.value * first
So far I worte a query that has a parameter of Like ([Forms]![formname]![txtname]+"*")
Yet I'm unsure as to how to get the query to display the ressults in the format I want... can someone help please?
M3ckon
I'm pretty sure there's a simple solution to this, yet I can't seem to find it.
I have a table that contains the Months of the year with an MonthID:
1|January
2|Febuary
...
I also have a form that contains a combobox with the Months.
When the user chooses the month, a query gets created, returning the MonthID.
I want to store the MonthID, in an invisible textbox, so that I can use it for my calculations.
If I use a textbox, I can't seem to display the result and if I use a listbox, I can't access that value.
How would I make it work?
This is the code used on the combobox:
Private Sub cbToMonth_Change()
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim strSQL As String
Set db = CurrentDb()
Set qdf = db.QueryDefs("getMonthID")
strSQL = "SELECT Months1.MonthID " & _
"FROM Months1 " & _
"WHERE (((Months1.Month) In ('" & Me.cbToMonth.Value & "')));"
qdf.SQL = strSQL
Me.monthIDTo.Value = "getMonthID"
Set db = Nothing
Set qdf = Nothing
End Sub
Hello
I'd like to create a query like this:
select table.column, table.column, table.column
from table
where table.column = textboxvalue
How can I do this?
One Query cannot store 2 different textbox in different forms:
Query Name: rem
Form Name: QR
Form Name: Pro
Query parameter: Forms!QR!txtbox1
Forms!Pro!txtbox2
I tried it, it cannot run.
If you run the form "Pro" and run the query rem, then you will get the message:
Forms!QR!txtbox1?????
same thing if you run the form QR and the query rem
I am trying to use a textbox value as a query criteria using the code [Forms]![Home]![mtdDateBox], following the standard structure of referencing a form item. However, I am not returning any records, when it should be giving some. The data in the textbox follows the date format "DD.MM.YYYY" but is used as a string.
Is there something I am missing out? I am using MS Access 2010
I currently have a search form that when criteria is entered it then opens up a query with matching results. What i would like to have it do is have a macro that runs the query so that it gathers the results and then displays the results into a form with a textbox called search results.
View 2 Replies View RelatedHow can I bind a textbox to summation query's value? I tried the formula builder and this did not work:
=[qryAutoMatchSum]![SumField]
My query contains two calculated fields [TaxSavings1] and [TaxSavings2], which are based on some currency and number-type fields in one of my underlying tables.
I just created another field in my query which looks like: [TaxSavings1]+[TaxSavings2]. Instead of adding the two fields, it actually lumps the two numbers together. For example, if [TaxSavings1] =135 and [TaxSavings2]=30.25, it will give me: 13530.25. I need it just to simply add, i.e. answer of 165.25.
Does anyone know how to correct this? Thanks in advance.
:confused:
Here's the situation.
I have a calculated value in an unbound textbox (avghcppmw). I want to run a query (qinsphistory) in which one of the fields is the value of the textbox (avghcppmw).
Is there any way to pull the value from the form and display it in the query. I'm assuming not.
I also assume the only way to do this would be to create a query that would calculate the textbox value and base (qinsphistory) on the newly made query.
Is this correct?
Hi all,
I have a query that is basically loading values from a open form.
Im using the format of Product: Form!form1!products to assign the value of products to product in my query... Now all this works with straight text, however this technique does not appear to work with dates or yes no check boxes. I have used the builder but still wont work with dates. any ideas? thanks
I also have a query that displays a date, I would like this date to be displayed within the textbox, not sure how to do this?
View 4 Replies View RelatedI'm trying to build a query to use as a filter in the DoCmd.OpenForm function.
I have done this several times before, referencing values from forms e.g.
Point To
Field: LeadID
Table: Lead
Criteria: [Forms]![GridDisplay1]![LeadID]
This filter is used in the procedure:
Code : DoCmd.OpenForm "LeadDetails", acNormal, Point_To", , , acDialog, """"
And it works great, I click a button next to the record I want to select (records displayed on continuous form) and it opens the Lead Details form on that particular record.
However now I am trying to accomplish the same thing, except instead of a continuous form I need to draw from a continuous sub-form. The form "BrokerMgmt" contains a sub-form named "BrokerSearch." The RecordSource for the sub-form is set once the user enters data into a few textboxes on the main form and clicks the search button:
Code:
Private Sub brkSearch_Click()
Dim argCount As Integer
On Error GoTo Err_Handler
If IsNull(brkFirstName.Value) And IsNull(brkLastName.Value) And IsNull(brkCompany.Value) Then
MsgBox "You Need To Select Some Values", vbCritical, "Lead Tracking"
[Code] ....
The sub-form then displays basic info such as Name, Company, State, and the "BrokerID" which is the primary key of the "Broker" table. This "BrokerID" is displayed in "Textbox 20" so I set a button next to each result to on_click perform the procedure:
Code:
DoCmd.OpenForm "BrokerDetails", acNormal, "Point_To_Broker2", , , acDialog, """"
"Point_To_Broker2" is set up in the same style as "Point_To":
Field: BrokerID
Table: Broker
Criteria: [Forms]![BrokerSearch]![Text20]
However instead of the BrokerDetails form opening to the appropriate record I get a msg box asking for a parameter. Why is this? Even if I enter the correct BrokerID as the parameter it still gives me an error saying you can't go to the specified record.
I have a simple report which i open from a navigation form, i have a textbox in the report i wish to use as criteria, on start the report will be blank until i enter a name into the textbox and requery. However im not sure how to link this and how to stop access asking for this information before the report is opened?
View 5 Replies View RelatedI'm having a very simple issue (I think) trying to pass a textbox value as parameter in a sql query.I have a multiline textbox and I use it to find several values in the database, so in this textbox all the values are pasted each per line and I have a small code to convert it to single line comma separated values.This is an example:The user enter the data:
[Text0]
A1C556CC3C-TNNN
C010070H13
The code convert this data to a single comma separated string and runs the query: ex: "A1C556CC3C-TNNN","C010070H13"
Code:
test = """" & Replace([Forms]![Search]![Text0], Chr(13) & Chr(10), """,""") & """"
[Forms]![Search]![Text0].Value = test
DoCmd.OpenQuery "FindPartNo", acViewNormal, acReadOnly
In the SQL code I use the IN operator to find the exact value for each record:
FindPartNo sql query:
Code:
SELECT Classifications.BU, Classifications.WisperPlantID, Classifications.PartNumber, Classifications.PartDesc, Classifications.US_CL_Code, Classifications.MX_CL_Code, Classifications.TARIC_CL_Code, Classifications.COEProject, Classifications.Supplier, Classifications.BrokerRequest, Classifications.CreatedBy
FROM Classifications
WHERE Classifications.PartNumber In ([Forms]![Search]![Text0]);
The problem here is, the query doesn't return results but if I modifiy the query and I put:
Code:
WHERE Classifications.PartNumber In ("A1C556CC3C-TNNN","C010070H13");
... the query returns the correct results.I'm passing the value incorrect into the sql code?
I intended to get a Value from a Query for a textbox, so I tried to use the Domainfunction DFirst.
Code:
=DFirst("[SAPANLAGE]";"[Query_Anlage_42]")
but now the box just shows #error and blinks like crazy.
I have a query, one of fields have a criteria. On other hand i have a form. User entry a value in textbox an click on a button then query run. criteria is value in textbox. What i must write in criteria?
View 1 Replies View RelatedI have a text box on 'Forma' & a textbox (named text3) on 'Formb'.
I want to copy the contents of the textbox from 'Formb' to the textbox on 'Forma'. I have used the following code in the textbox on 'Forma'....
=Forms![Formb]![Text3].text
This doesn't seem to be working whether both Forms are open or only 'Forma'. Could somebody please advise as to what I am missing. Your assistance is very much appreciated.
Dear All:
I have created a form using access 2000. So far, this form already has data and dates in a combox in this format: mm/dd/yyyy.
In the AfterUpdate of the date combobox, I did this:
If graduation_date = #2/1/2004# then
Text_Graduation_date = "dated this first day of february two thousand four."
End If
End Sub
In addition, I have defined many other dates as well using the code above. It works well when I choose the date form the combobox, the other textbox populates, but there are so many more dates in the combo!
Is there a way to auto-populate the textbox with the appropriate text as I scroll through the form?
Thanks,
Dion
I have a textbox that is set equal to countitem field of a query. The query is based on a subform that exists on the same form. I am trying to update the textbox every time the number goes up or down on the query. Whenever I open my form the number for this textbox is updated. Can I update this field without having to open the form everytime?
View 1 Replies View RelatedAnyone know an efficient way of setting the value of a textbox to the result of an sql query?
I am using the following, but it seems to be slow when populating a large form:
Make.RowSource = "SELECT BarcodeDATA.Make FROM (Customers RIGHT JOIN CustomerSales ON Customers.CustomerID = CustomerSales.CustomerID) LEFT JOIN BarcodeDATA ON CustomerSales.ItemNum = BarcodeDATA.ItemNum WHERE (((CustomerSales.ItemNum)=[Forms]![FormCheckConsignmentStatus]![ItemNum])); "
Make.Requery
Make.Value = Make.Column(0, 0)
Let me know if there is a better way to do this.