I have a few forms in my database that I used the wizard to design. They work as intended however the default control that access uses is horrible. Is there a way to modify the control of these forms without building them from scratch? I'm afraid I wouldn't be able to build it from scratch and have it function as it does now.
View RepliesI have an inventory entry form with 3 controls on it. One is the area counted, the second is an item number, and the third is the amount counted. When the form is opened it prompts for the area counted which then changes the default value so you don't have to enter it again. The problem is that it works for a number but not alpha-numberic or alpha.
The table is set as text and I've tried setting the inputbox to string and still can't seem to avoid the #Name? error.
Any direction would be appreciated. I tried looking up a past thread but couldn't find anything this specific.
hello all! I use this site very frequently when I run into issues and I can always find an answer... until today, hehe.
anyway, here is my problem. in my application, on the main form if you will, are 4 tab/page controls. when the user uses the navigation buttons on the bottom (these are access' form navigation buttons), regardless of which tab they were on, i want it to automatticly display the first tab, first. i have figured out that it is on the form_onactivate event that i must do this, however i cannot seem to get that one tab to the be the default. i have tried using the page index, set focus, i have tried calling a control on that tab/page, refreshing the form, simulating a user "click"... needless to say i am fresh out of ideas. :confused:
any suggestions would be greatly appreciated. thank you for all the help you have given in the past too :)
Table1 has field (% Completed this Period) that may contain a value, or may be NULL for each entry, depending on how much work was performed that period. The records are sorted by date.
Form1 has a textbox that basically keeps a running tally of "% Completed to Date" by summing the "% Completed this Period" for the current period and all previous periods. So, my Control Source for the textbox is the DSum(...) function.
The problem is this: If I am looking at the first record and there is a 0 (null) value for "% Completed this Period," (i.e. No work was completed that period), I want to display 0 on Form1. However, Access just displays nothing - a blank textbox. I tried making a default value, but nothing will show up since I already have a Control Source set for that field. If I take the DSum function out of the Control Source, then the 0 will show up. But, obviously that defeats the whole purpose of the textbox. I guess I'm trying to figure out how to display the DSum value IF it is something other than 0, BUT IF IT IS 0, then I want 0 to be displayed. Any help would be appreciated.
I would like to be able to put an if expression in the default control of a tx box.
I would like to say
if txtA = 0 then [Forms]![frmNewAppointment]![OrderTime] else [Forms]![frmAppointmentTreatmentItems]![TextA]+[Forms]![frmNewAppointment]![OrderTime]
Is it possible and am i close to doing it mysel?
code doesn't wants to set the control default value
View 5 Replies View RelatedHow I might use a value selected by a user on a database opening menu (which remains open), as a default value for records created programmatically in other tables?
I wonder if I need to write a function to repeat the value - but I cannot see how to use a form value outside of the form's own code. Some of my existing code inserts values into tables using SQL converted into VBA and I do not really want to start fiddling with that - I would rather for now use the default value of the table for the field.
My variable which will change depending upon which set of records a user is working on is a string "FullAccession".
When a user creates records in a table called tblGroups, I need the string "FullAccession" to be the default value in the tblGroups.FullAccession field. A unique integer in the tblGroups is "GroupNo". "GroupNo" and "FullAccession" are joined in a unique index for tblGroups. There is a separate PK autonumber.
I am dynamically trying to set a control default value. I have the code below in the On Load event of the form. I get an error msg that says "Run-time error '2467': The expression you entered refers to an object that is closed or doesn't exist."
Forms(mainform)("Dyn_" & Trim(str(Project_ID)) & "_SubFrmTab03" & PT_Suffix & "_Approval").Controls("Groupid").DefaultValue = "=Forms!" & mainform & ".ClaimInfoGroupID"
I have 3 tables, tblClients, tblClientDetails, and tblSchedulingDetails.
I have a field in tblClientDetails to contain the client number from tblClients, and I have two fields in tblSchedulingDetails to contain the client number and the client details number.
I then created a form that holds most of the fields for all of the tables mentioned above to enter new client names, new client address info, and basic client scheduling info.
Now, I have set the default values using the property sheet in design view for the following:
ClientNum > ClientNum_tblClientDetails and
ClientNum > ClientNum_tblSchedulingDetails and
ClientDetailsNum > ClientDetailsNum_tblSchedulingDetails
I promise this is not a riddle...
Here's the quandary - ClientNum_tblClientDetails is autofilling from tblClients, and ClientDetailsNum_tblSchedulingDetails is autofilling from tblClientDetails, but ClientNum_tblSchedulingDetails is not autofilling in spite of the fact that the default value is set with =[ClientNum].
I then created a modal dialogue form with the fields from tblClients and tblClientDetails with a command button that opens another modal that contains the fields from tblSchedulingDetails, set the appropriate default values, and the ClientNum_tblSchedulingDetails autofills as needed.
The question at hand is, why do I have to use modal dialogue forms to perform this action and cannot do it in one single form?
I am having an issue setting an instantiated forms' control. I am having RemDate ("Date") and RemTime ("Time") TextBox; so far the date textbox shows 1/1/1988 12:00 AM (the visible value is the time only) and the Time textbox doesn't show anything.
Code:
Set frm = New Form_ReminderAssigneesFrm
frm.RecordSource = "Select * from ReminderAssignees Where RemID = " & Parent.RemID
frm.RemID.DefaultValue = Parent.RemID
With SetRS(frm.RecordSource)
If Not .EOF Then
frm.RemDate.DefaultValue = FormatDateTime(.Fields("RemDate"), vbShortDate)
[Code] ....
Private Sub btncard_Click()
Dim stLinkCriteria As String
DoCmd.RunCommand acCmdSaveRecord
stLinkCriteria = "[jobref]=" & "'" & Me![jobref] & "'"
DoCmd.Close
DoCmd.OpenForm "k_job_card", , , stLinkCriteria
End Sub
this button code opens the k_job_card form.
the form opens and says 'Record 1 of 1, (Filtered)
i have a control on the form that opens.. and i am simply trying to assign a default value to that control..
it is a textbox.. for my jobtype field (text datatype)..
is there any particular reason why i cannot assign a default value to a control if it has been placed on a form that has been opened using a form filter?
this is how the Form Data tab is set at the moment..
Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....
Access 2007
In a table I have 2 fields:
D1 , Date/Time , DefaultValue: Date()
D2 , Date/Time , DefaultValue: Date()+1
In a form (bounded to this table) I have, of course, 2 controls bounded to this fields:
txtD1 and txtD2
If the user change the value in txtD1 (using the Date picker) I like to change the DefaultValue for txtD1 to the new date and the DefaultValue for txtD2 to the new date + 1 day. Something like this:
Code:
Private Sub txtD1_AfterUpdate()
Me.txtD1.DefaultValue = Me.txtD1
Me.txtD2.DefaultValue = Me.txtD1 + 1 day
End Sub
I tried whatever crossed my mind... with the same "result" : #Name?
My Regional settings:
Short date format: dd.MM.yyyy
Date separator: Dot
Simple: 05.12.2013
Expressions in Access have given me some trouble before. Mainly due to inexperience. I hardly ever work with them. What I am trying to do is make the default value of a form textbox control the minimum value of a field A in a table A. The datatype of Field A is Date.
So far I've got:
=Min([table A].[field A])
In the Default Value of the form's property sheet, but this just returns a blank value. I've had a look in the table and there is no value that is blank in field A.
In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.
I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.
Hello, how can I change the "default" textbox properites.
When ever I place a new textbox on the form it has certain properties which I must always change.
For example I want all my textboxes to be flat not sunken and to have a solid border style. Currently the default is sunken and transparent border so I must always change it.
I know how to do it via VBA... just want to do it immediately using default.
I am assuming it's somewhere in Windows Registry?
Thanks
Hi Everyone,
I hope someone can help.
I have a form with a combo boxes and a table with relevant list and additional field, fldDefaultDrive (Yes/No Field).
Currently in order to set the default value, I have used the following code for each default;
Private Sub Form_Load()
Forms!frmMediaLabeller!CboDriveName.DefaultValue = """D"""
End Sub
However, I want users to be able to go into the table and change the default value if thier CD player default Drive is anything but D: Drive. I have tried to replace the D above with an SQL statement but with no success.
Private Sub Form_Load()
Dim Drivename As String
Drivename = SELECT tblMediaDrive.fldDrivename FROM tblMediaDrive WHERE (((tblMediaDrive.fldDefaultDrive)=-1));
Forms!frmMediaLabeller!CboDriveName.DefaultValue = """Drivename"""
End Sub
This is definetly not working, can anybody help, I have a feeling it is syntax but not sure where? :confused:
Robert88
I added a new field to one of my tables and query, but when I try to add a control for that field into my form it is not recognising it and the field isn't appearing in the sources for the form, even though the table is sourced to the form? Or am I going to have to do the usual and redo the entire form because I made a minor adjustment?
View 1 Replies View RelatedI have a form with a tab control, inside the tab control I placed an ActiveX control (Microsoft Web Browser). These are at the bottom of the form.
Everything displays fine if the entire form fit on the screen but if the form is too long and I scroll down the browser control is getting obscured by the tab control and getting chopped off (the contents are covered). It is as if the browser control is staying in space where it was and moving behind the tab control as I scroll.
This problem does not occur if I place the browser control directly on the form. Also I note that the browser control is sitting correctly within the tab control.
I have been through all the settings and properties of both controls and haven't been able to fix it. I searched all over the web but no one has previously stumbled across this one by the look of it.
See the attached image ...
I have table that I had to add a new field to which we update with a form. I tried to add a control for the new field but the field does not show up in the list for the control source. I am trying to add a list box to the form with a blank and 5 options.
I have attached screen shots of the table design and the form. The table has the field in datasheet view and I have manually entered a few entries in it but it still will not show in the control source for the form control. The top section of the form is where we enter and select the data for the new records. The bottom section (circled in red) autofills the matching record, from separate tables, for updating with the new entries.
I have added form controls for modified fields in the past so I am confused about why this is happening.
OK. I have searched and searched and every thread dances around similar situations but none seem to address this particular one. I am trying to make a control on a sub form visible/not visible depending on the condition of a control on a main form. The catch is that the control I'm trying to change the state of is on a subform located in a tab control. I've tried a thousand combinations and none seem to work. How do I reference the control on the subform in a tab control?
Main Form: frmMemberMain
Tab Control: TabCtl12
Tab Control Page: 2
Subform: frmChildren
Control on subform: txtRelationship
Can someone please help before my brain explodes!! Thanks! :eek:
Hi,
I have reviewed the posts for 'Control Validation' and dowloaded the sample database kindly posted by ansentry.
In the PaymentAmount example, a name has to be entered in the first control before an amount is enterered in the second control. If the controls and tab order are reversed, the validation doesn't work.
I have a form where the 1st Control needs validating before moving on. The code below doesn't work.
Private Sub Form_BeforeUpdate(Cancel As Integer)
If IsNull(Me.Employee_No) Then
MsgBox "Employee No Required", vbCritical, "Data required "
Cancel = True
Me.Employee_No.SetFocus
Exit Sub
End If
End Sub
Any help greatly appreciated.
John
Dear Sir...:)
Please your help it is urgent for me.
There is to table:
First table name (UserName) with fields:
1- UserID
2- name
Second table (Website) with fields:
1- Id
2- UserID
3- WebSiteURL
And there is one-to-many relationship between them.
what I have to do if any new users register by default; it gives him URL (I have to let default more than one).:confused:
Please your help ASAP.
Regards;
FAIZ
I am trying to set up two date fields in a table, and I would like the second date field to default to the value of the first date field for each record - is this possible to do in the table design?
View 2 Replies View RelatedI want to set the default value on a table to 'Previous'. Basically I want to display the value in the field above it, so say if I have a company name "bobs boats", I want the next company name to default to "bobs boats". Can you do this??
View 9 Replies View RelatedHey,
Ive got a table set up which is not calculating properly (or least i cant seem to get it to) Basically i have a row for quantity and a row for unit price. What i want to do in my table if possible is times the unit price by the quantity so it will come up in my reports which at the moment it isnt doing, as the default value is 0 in my table!
Might anyone be able to help me on this matter?
Thanx in advance