Textbox - name is 'text'
Button - name is 'button'
my user will type in something like this..
pictures/db1/db1.jpg
all i want is that when they press the button.. the url 'http://www.mysite.com/"
is added to the data in the textbox and the url is opened.. this of course will allow my user to test whether the image they are referring to exists..
can this be done.. if so what code do i need to add to my controls.
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
i have created a form that has data in a field as a referance, i want to use that ref to open a page or PDF file to that referance ,
The idea is that the form is the data input for hard copy documents, i will scan the documents and store them on a hard drive i then want to open the documents as word, or PDF files from the form to the ref of the field in that form
Hi all, Not sure if this is in the right section but heres my question.
How can i gett a button to open a word document and put in specific information. for example. to send a client a letter, the button would open a word doc with the specfic client data in it.
Also a button to start a mail merge with all client records held on the db.
I have a subform in which I want to put in a Command Button to open another form.
I used the wizard as per normal, but when you come to matching specific data fields, there is nothing in my left hand column of the sub form. I have checked the record source property and it is bound to the correct table.
I have read that this is an issue with Access 2007? Is this the case or am I missing something obvious here?
I have a form with 7 List boxes linked to 7 Query's which in turn are linked to a table. Each list box if for a particular trade.
I am trying to select a person or persons from each List box and then have them sent to a report. I have Code to do one list box, but do not know how to link all boxes with code to a 'Open report' button.
The code I am using is as follows:-
Private Sub cmdOpenReport_Click() On Error GoTo Err_cmdOpenReport_Click Dim strWhere As String Dim ctl As Control Dim varItem As Variant 'make sure a selection has been made
Basically I want to type the ID(key) of a record table in a unbound text box and then by pressing a command button to be able to bring up that record (in form view). I do not want to use a combo-box.
So what do i write as VB code in the Private Sub mybutton_Click()
Table name is [ACTION_ID], ID field name is [ACT_ID] & text box name is [TEXT_BOX]
I currently have a button that opens a report. the report pulls from a query that has parameters set to "fromdate" and "todate". instead of using dates and parameters that pop up as blank text boxes, I would like to click the button, have a form pop up with a combo box to select all of the options available (currently 23 options) and then click a button to make a report that only displays the record (1-23) selected. I do not need any time constraints because as the databases get updated with more records, there would be more than 23 options to choose from.
I'm trying to show a count of filtered records on a form. The Filter is number of days from the system date which I've already built into a query. I'm trying to get the record count for each day out up to the tenth day and show the counts on a form. Is this prossible? and how is it done?
Basically I want to type the ID(key) of a record table in a unbound text box and then by pressing a command button to be able to bring up that record (in form view). I do not want to use a combo-box.
So what do i write as VB code in the Private Sub mybutton_Click()
Table name is [ACTION_ID], ID field name is [ACT_ID] & text box name is [TEXT_BOX]
I currently have two froms, "add record" and "add record cont." The reason I have two seperate forms is because when clients create a new record information needs to be saved to two different tables and when creating one from with fields from both tables I ran into many problems. The two tables are named : tblMain, tblFileLoc Currently there is a textbox on both forms named "fileID" the FileID in the first form is from tblMain and is the primary key for that table, the FileID on the second form "Add Record Cont." is just a normal field. When clients enter in the new FileID in the first form "Add Record" and then move onto the next form "Add Record Cont." i need access to bring the entered FileID from the first form and Fill it in the FileID field in the second form. Currently I have tried making the control source for the textbox on the second form = the textbox on the first form but it brought up an error.
I have a button that when I press it it goes to new screen where I can add new data in, and then save it.I have 10 texboxes in this form, how can I when press the button to add data let it on 3 texboxes show info eg. 4321MAG01- and when I am on the new form I can change or add to it. eg 4321MAG01-123
I have a textbox with about 400 characters, I also have 5 textboxes next to it. I want to click a button and I want to transfer the characters to the other textboxes 208 characters at a time.
I'm trying to have a button in a form that, when clicked, will time stamp a text box already formatted for time. But once the text box is filled with a time, the button then disables itself for that record.
If I switch to another record where the text box is empty, the button will enable itself without closing the form, but obviously re-disable itself if I go to a record the text box is filled.
I'm sure I could use conditional formatting for it, but I don't think I'm going about it the right way. I already got a basic button built to timestamp.
I have a mainform with a combobox and a button. What i want is when i click on the combobox and then on the button I want that the textbox in the subform automatically fill in.
The mainform name is FrmTakenInvoerenEnToewijzenAanEenMonteur,
I am writing a macro to automate the filling up some data from excel to company website. I have changed the website name in this post for data protection purpose. The excel will login for different clients by using the combination of username and password for respective clients and then some data are required to be inserted in a text box on a web page, I think the text box is on a form and form is within an iframe, within the web page. Once the data is inserted into text box, one button (Submit), which is also on the same form, is to be clicked.
On the click of a button, the updated data appears on another section, I could not make out if it is an form or frame, which is under the abovementioned form. Once we are happy with the way data appears on the web page, we have to click another button (Update), which is on the same section, to finally updating the data on website.
I wrote the following code to login to the website and then to navigate to the web page where I have to fill up the performance numbers in a text box. The first problem is how to access the text box inside the form from VBA so that the macro can write a number in that text box and how to access the button to submit the data. The HTML code, which can be seen on click of F12, is attached below. The second problem is how to access the Update button inside the other section, so that the data will be finally uploaded.
Code:
Sub LoginToCorpAccount() Dim ie As Object Set ie = CreateObject("InternetExplorer.Application")
[code]...
<div id="ssc-consumers-holder"/> -
This the line which gets highlighted when I click on the section where the data appears after clicking the submit button, and from here Update button is to be clicked.
I have made a form. By giving an ID up firstly this form of the concerning person appears. Now I want to make a link to a report on this form. The intention is then that only those data are shown in the report of the concerning person (therefore with the ID that is reflected in the form).
Now I can open the report by means of a button... but then to get the correct data I have now used a query with a parameter value (the ID) (the report has been based on these query). But the situation is now therefore that if you click on the button that you must introduce the parameter value firstly. Is there also a solution where this is no longer necessary??... therefore that you have to click only on the button and then the concerning data of the report are shown. Therefore by giving in or an other manner the ID with. ??
Hopefully it is understandable, (my english is not that good...)
Implementation is going fabu, but I had a request to add a button on the main form to open the HTML FAQ I wrote. I thought I would be able to quickly point the button to the file using the button creation wizard, but that doesn't seem to work so well. (not at all)
Did I miss something or is this something that needs to be coded with VBA (very little knowledge of VBA here... negligible even.)
Is it possible to have a cmdButton open a pre saved image from your hard drive. The images are saved with the same name as the Account Number. (ex: AcctNum -- TA123409 Image -- TA123409.bmp) I want the cmdButton to open the image filtered or based on the Account Number. If so, could someone show me a sample OnClick code. Thanks
Good morning All, I have a form with a command button to open a report ( based on a query ) for the currently displayed record. here is the code I have used:
Private Sub CS_notes_Click() On Error GoTo Err_CS_notes_Click Dim stDocName As String
I believe this came from this forum sometime. When the button is clicked I receive the error: "Syntax error (missing operator) in query expression '(TLAUnit = 26712B')'
TLAUnit is the report field, UnitSN is the form field. Any help with the error? Thanks Kevin
the wizard does not have a button to open tables...i have been using this code to open forms...what needs to be changed in order to make it open tables?
Private Sub Command5_Click() On Error GoTo Err_Command5_Click
Dim stDocName As String Dim stLinkCriteria As String
hello everyone, i have 2 tables have Relationships with each other and i have a form with a listbox and has the surnames from table1 in it i want a button to open the job information form on new record and i want it to have the client number in it all ready if i click on one of the surnames from the listbox tables names tbl Client Detials = have clients information tbl job information = has job information both have client number feild and have Relationship
form i want the button on is called frm client splash and the form i want it to open is frm job information its hard to tell u srry i hope someone can help me ________________ David