Lets say I have a form called form1 with 2 subforms named subform1 & subform2.
Can I place a text box on form1 that totals fields located on subform1 & subform2?
This is what I currently have as an expression in the text box. It is in the before update event, which may be the problem. Any ideas or solutions are much appreciated. :)
=[subform1].Form!field1+[subform2].Form!field1
I have 3 values in unbound text boxes and a 4th text box that is calculating the sum of the first three text boxes, i need the result of the calculation to be stored in the field "Total Cost" that is also on this form.
Any ideas
Cheers Mikk
I have strange issue when creating auto populated text boxes which displays rows from combo boxes.
In one database auto populates works with simple text box Control Source edit "=[ComboName].[Column](NumberOfColumn)".
Somehow same method doesn't wotk in different database: here one time I have to insert VBA code at On change Event:
Me.TextBoxName = Me.ComboName.Column(NumberOfColumn)
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
View 4 Replies View RelatedI'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I have a form with a List Box (List BoxA) that returns a value from a query. I then have a Text Box (Text BoxB) that uses the value from List BoxB and multiplies it by let's say 2. It works giving me the correct value but only becomes visible after I click inside List BoxA. How can I make it visible as soon as the form is opened? I tried refreshing the form data, didn't work and I tried a requery macro which didn't work either.
Thanks,
Lester
Hi
Got a form with a Detail section that can have any number of textboxes in it depending on the data a query brings back:
e.g.
QueryID Calculatedtextbox
QueryID Calculatedtextbox
QueryID Calculatedtextbox
QueryID Calculatedtextbox
The Calculatedtextbox has a DSum function, which uses the QueryID (another textbox).
I then have a footer at the bottom and need to sum all of the textboxes. Is this possible? Access doesn't seem to like it...
Another quick request:
What would the code be for a button which clears the contents of a text box or a combo box on a form?
Many thanks,
Paul.
Hi,
I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks.
By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
Hi guys, I have a related databes with about 20 tables.
My main table stores the data linking with most of the other tables. This main table stores football match records with player line ups. Initially I had a problem linking the 11 player fields in the main table to the player table, Icould only do it with 1, so someone at work suggested to link it using the lookup function. This worked brilliantly. However, now I am designing a GUI with forms but the forms have combo boxes where the lookup function was used and when i change these to text boxes, the players names are replaced with their ID numbers.
Is there any way of creating the form without the unsightly combo boxes, as they won't be needed, the GUI will be read-only. I look forward to your help!!
I have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
View 3 Replies View RelatedI have a table that has client names and addresses. I have designed a form to be able to invoice these clients and everything is fine however what I'd like to do is have the address of the client appear automatically.
I have set the client names in a combo box and would like their address to appear in either a text box or sunken label automatically from the table. Is this possible and how do I do it.
Please keep in mind that I've done basic programming so please be kind to this newbie :D
I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
View 1 Replies View RelatedI have a form on which there is a series of text box controls relating to different frequencies. At the moment I enter a value in to each of these manually.
However, I would like to have an unbound text box where I can paste in all the values (6 or 8 of them) from excel and then press a button and they would be copied in to the individual boxes.
So far I have my design:
I'm not sure where to start with regard to the code as I don't know how to handle delimited text - is it column delimited in excel?
I imagine some sort of loop, such as a do until will be required but again not sure.
Is it possible to use find and replace to modify text in report design - or else is there something else I can do to get the same effect? I have a really useful report and I want to modify it for use with a different dataset. To do that I will need to change the text in over 150 text boxes. I have seven different fields which each occur over 20 times in the control source formulas in the text boxes, because they are used in different ways in different calculations. If this was excel I could do a simple find and replace to change e.g. every reference to fieldname OLD to fieldname NEW, but I cannot see how to do that within access report so am haveing to click on each text box in turn, go to properties and edit the text box .
I am trying to switch to a more general naming system in the modified report so then I will be able to assign data with the required fieldnames for the report within a query. But the report I am starting with has field names based on years 2013, 2014, 2015 etc.I want a quick way to change each reference to those field names to my more generic new field names.
I am trying to search on EmployeeID field and populate corresponding data like EmployeeName, EmployeePay in other text boxes in the same box .
In my Unbound Form I have three unbound Text Boxes and one Command button:
txtEmpID
txtEmpName
txtEmpPay
cmdFind
In my table EMPLOYEE i have three fields
EmpID -- Autonumber
EmpName -- Text
EmpPay -- Text
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click()
DoCmd.FindRecord Me.BarTxt.Value, , True, , True
CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _
" WHERE Customer = """ & Nz(Me.BarTxt) & """" & _
" ORDER BY Customer"
End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
Ok, so I'm pretty new at this stuff, and while I'm sort of familiar with VB, I feel like there should be a fairly simple expression that could solve my problem. I have a calculated text box that is based on what is entered in another text box, like so:
the source number is in a field called Word Count.
my calculated box's Control Source is =([Word Count]/250).
My goal is to automatically calculate the number of pages based on the number of words per page (250). I used Format so the bank rounding problem doesn't effect the outcome, but if the Word Count field is less than 125 the number of pages is 0. which is obviously not the case.
I've tried fiddling around with the rounding, but then it starts rounding higher word counts up too soon.
thoughts, please?
Hello,
I have been struggling to see on a new form data calculated on a different form.
What I mean is that I have calculated a stock balance using a subform where the balance=[QuantityReceived]-NZ([Stock record table Subform].[Form]![SumQtyIssued])
Now, I woud need to see the balance value on an another form with the same Data source query.
I have been trying to assign the control source of the balance as follow but doesn't work: balance=Forms![Stock record sheet]!Balance where [stock record sheet] is the form where the balance is originallly created.
I guess that you can't reuse data calculated in form and should probably store these data in a table or a query. Is there any other sensible way to do this?
Hello, Bit of a newby to all this. Am trying to use a text box as a calculted field. I am doing so using an sql statment in control source The sql stat is built and tested using build query and then copied and pasted from sql view)
I keep getting #name? as an error.
I have managed using dlookup of the same saved sql to return the required value (which works) but find it to be a bit slow and clunky so wanted to give this a go instead. If somebody can have a look at the query below I would much apreciate.
=(SELECT Sum(QryInout!CostExVATGBP) AS TTlCostExVATGBP
FROM QryInout &_
WHERE (((QryInout.StockImportNoJoinToAll)=[Forms]![FrmSPurch]![ImportNoNew])) &_
GROUP BY QryInout.ProdType &_
HAVING (((QryInout.ProdType)="Freight"));)
Note that I have tried with and without the &_ and also with or with out the brackets..
Thanks
I am trying to use DCount to count the number of record that = 0 for field checklistitem_1 in table 'Data Input'.
I firstly tried =DCount("[ChecklistItem_1]","Data Input","[ChecklistItem_1] = 0") but this returned nothing.
So I tried =DCount("*","Data Input") just to see if I could get something back and still nothing.
I double check the names are correct, dropping the quotation marks different combination of brackets and nothing every time.
Please help me
I have a textbox in a report that I would like to calculate the sum of values that are less than 600.Then have a second textbox that counts the number of records that have values less than 600..This is based off of a query with calculated fields..I have been working with a formula that looks something like this
=Sum(IIf([BaleETime]="<600",0))
But all I get is a value of 0.BaleETime is the elapsed time between bales.
I am using the following and is working perfect
Private Sub NEXPPRC_AfterUpdate()
Me.[Purchase Description] = Me.NEXPPRC.Column(0)
Me.[Purchase Price] = Me.NEXPPRC.Column(1)
Me.[Purchase Units] = Me.NEXPPRC.Column(2)
[Code] .....
The above is for combo box, Now I want to use similar code to store calculated text in a field to the table "Purchases" but for the text box
Name of the text box:
Atcom
calculation Value:
AASTamt: ([aasc]*[Purchase Qty])
I tried but this is not working on the text box Atcom
Private Sub Atcom_AfterUpdate()
Me.[Atcom] = Me.([aasc]*[Purchase Qty]).Column(0)
Me.Requery
Me.Refresh
End Sub
I have a textbox on a form that displays a calculated number with regards to input from other text boxes.
I need this calculated number to update to a corresponding field within a table.
I have a button that updates the information, but the calculated field will not update.
I have an "=" expression written that does all of the calculating. When I put this in the 'control source' it calculates and displays on the form perfectly, but will not update the table. If I change the control source to the field within the table and then move the "=" statement/expression someplace else....the field is blank on the form, but I can manually input a number and it will update to the table.
Follow?
I have 4 texts fields [DEVICE INSTALL] , [INSTRUMENT STAND], [BRACKETS RACEWAY SUPPORTS], [TUBING CAPILLARY] all can be either a percentage from 1-100 or "N/A" except [DEVICE INSTALL].I would like to calculate the [percentage complete]
my calculation in the field is as follows:
([DEVICE INSTALL]+
IIf([INSTRUMENT STAND]="N/A",100,[INSTRUMENT STAND])+
IIf([TUBING CAPILLARY]="N/A",100,[TUBING CAPILLARY])+
IIf([BRACKETS RACEWAY SUPPORTS]="N/A",100,[BRACKETS RACEWAY SUPPORTS]))
/4
this seems to work to a degree. but for some reason when the [INSTRUMENT STAND] value is not "N/A" the percentage calculated is a wacky value much higher than 100. how could I possibly change my division #?