Code On Current On A Form
Jun 27, 2006
i have a subform within a form that i want to create and automated procedure.
the subform has a couple of combo boxes.
upon input into the subform i want to do something like if the value of combobox1 starts out with the letter B then the value of combobox3 equals combobox2 * 1/2
i am just having a hard time putting it in code.
as of now i have a on current event on the subform that reads
if me.[combobox1] like "b*" then
me.[combobox3] = me.[combobox2]*.05
end if
any help would be greatly appreciated!
View Replies
ADVERTISEMENT
Jun 27, 2006
i have a subform within a form that i want to create and automated procedure.
the subform has a couple of combo boxes.
upon input into the subform i want to do something like if the value of combobox1 starts out with the letter B then the value of combobox3 equals combobox2 * 1/2
i am just having a hard time putting it in code.
as of now i have a on current event on the subform that reads
if me.[combobox1] like "b*" then
me.[combobox3] = me.[combobox2]*.05
end if
any help would be greatly appreciated!
View 1 Replies
View Related
Jun 27, 2006
i have a subform within a form that i want to create and automated procedure.
the subform has a couple of combo boxes.
upon input into the subform i want to do something like if the value of combobox1 starts out with the letter B then the value of combobox3 equals combobox2 * 1/2
i am just having a hard time putting it in code.
as of now i have a on current event on the subform that reads
if me.[combobox1] like "b*" then
me.[combobox3] = me.[combobox2]*.05
end if
any help would be greatly appreciated!
View 1 Replies
View Related
Aug 29, 2005
Hi
I need a button code in the OnClick event.
I want when clicking on the button, to close the currently opened form and open another one.
Any help will be very much appreciated!
Thanks guys!
C.
View 10 Replies
View Related
Oct 9, 2014
I am trying to define a path to identify a current folder - I'll try and explain the way the following code works first (and it does work 100%)
The following code identifies folders and sub-folder structures and imports them (their structures and folder paths and filenames) into a DB
It also simultaneously retrieve's any xml docs within those respective folders and imports the XML data into the same database ........ and then moves those folders into a "processing folder" location.
Cool yes, but I can only import the XML doc's at the moment, by hard coding the path (like this):-
path = "C:UsersjeremybDesktopsnapmadXYZ123XYZFILES 0061940"
The code is highlighted as above - in the FULL code below:
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Code Begins:-
Option Compare Database
Option Explicit
[Code]....
View 2 Replies
View Related
Sep 25, 2013
How to write Sample Code to Retrieve the Current User Name?I have done for short name only and I need it full
Private Declare Function apiGetUserNameWindows Lib "advapi32.dll" Alias _
"GetUserNameA" (ByVal lpBuffer As String, nSize As Long) As Long
Function fOSUserName() As String
Dim lngLen As Long, lngX As Long
Dim strUserName As String
[code]....
View 1 Replies
View Related
Aug 27, 2013
What I really need is for when the form opens, it looks at todays date, then matches current user and then goes to that record for today, if no current user there, then will goto new record..
i know, sounds complicated, and probably is really easy, but my heads not with it today, as about to get drunk as its my 40th, and got people ringing and texting and still trying to get this done....
I've included a copy of this database, named Timecards..
View 1 Replies
View Related
Mar 20, 2014
What I would like to do is create a list box that will only display the information from another form that is related to the current form.So I have a form call Equipment Catalog and that form is related to Equipment features 1 to M relationship and the Equipment Features is related to a Features form M to 1.
So what I want to do is display all the related equipment features in a listbox that is related to the current PK of that form.So if there is only one feature on one form the list box will only display that one item however is there is 6 features on another it will display all 6.I have been trying SQL and Queries but I still can't get it to work.
View 1 Replies
View Related
Sep 30, 2013
I would like to create a command button on my form that copies values from 5 fields in the current record into a new record leaving all the other fields blank except for the new record ID.
The fields that contain the data that I want copied into a new form are:
1. Member_Name
2. Member_ID
3. Account
4. UBH/PBH
5. Assigned_WRCA
View 8 Replies
View Related
Mar 14, 2013
I am using Access 2010 - Version 14.0.61.29.5000 (32-bit)
I am building a custom Export Wizard to export data to Excel using the Report Wizard for the basic ideas.
All I am trying to do is have a [Back] button on a form to open another form and close the current form.
Private Sub cmdBack_Click()
DoCmd.OpenForm "frm_ExportWizardPage2", , , , , , Nz(Me.OpenArgs)
DoCmd.Close acForm, "frm_ExportWizardPage3"
End Sub
The new form is opening but then the current form is not closing. All forms are the same size, shape and positioned centrally although this should not make any difference.
Could this be anything to do with which form has the focus when I open the new form?
View 2 Replies
View Related
May 1, 2014
I have a series of forms that become current in a certain order. For example a menu form comes up. This is followed by a search form where the user gives search parameters. Then appears the results list. If the user wants a detail form comes after that, etc. Now when the user closes the last form I want the form before that one to show up and when he closes that one the one before that and so on. That is I am going to use the close button to go back to the previous step. How can I do this.
View 5 Replies
View Related
Apr 17, 2014
I have three objects a Main_Table , ClientDataForm and a MapForm all three share a common ClientID number
From that Main_Table I have created a ClientDataForm form which I enter all Data
From ClientDataForm I wish to create a button on it which runs a Macro that Saves ClientDataForm Record and then populates another form named MapForm with whatever record is currently open in Form One whether a newly created one or previous record.
How would I write this code for that button? Also why I would write it that way?
View 3 Replies
View Related
Nov 23, 2014
When I have a form called "SiteForm" open and click a button "NewCalloutButton" I would like it to open up a form called "CalloutFormEntry"
I've done this using
Private Sub cmdOpenDetail_Click()
DoCmd.OpenForm "CalloutFormEntry", , , "CalloutID = " & Me!CalloutID
End Sub
However this brings up all the records linked to the calloutID
What I'm after is to open the CalloutFormEntry from the SiteForm in a dataentry kind of format but to carry over the current SiteID based on which site is open on the SiteForm. That way there's no user error logging callouts to incorrect sites.
View 9 Replies
View Related
May 7, 2005
I have a fault form which the user enters details of a fault. When the fault form is submitted the data is saved in the relevant table and the form is cleared so that the user can enter the next fault. On the fault form i have a subform which displays the faults previously entered by the user. I want the user to be able to click on an entry in the subform and open the orignal fault form and see the data that had been entered. How can i create this functionality??
View 9 Replies
View Related
Feb 14, 2006
I can't seem to figure out how to close current form.
I have form1 and I open form 2 from form1. I can't figure out how to close form1 when form2 opens.
Any help would be greatly appreciated.
View 6 Replies
View Related
Sep 10, 2006
Im trying to set up a button on that form that will look at a current file lets say sex: male and it will filter all of the records by that criteria. Can someone point me in the right direction. Any help would be appreciated!
View 3 Replies
View Related
Feb 4, 2014
I have a bound form with a few fields. I would like to run a sub after some of these fields are modified, but not others. I would like it to run only once, after user finishes his work on the form.
When using the Unload event - the form on the form is not there anymore (or did I get something wrong?).
Is there a way to trap Data on form just before the form closes?
View 4 Replies
View Related
Aug 17, 2006
I have a form in access that opens to the first record every time. This form will be constantly updated and i was wondering how i can set it, so that it opens up to a new record everytime you open the form.
Anyone know how to do this?
View 3 Replies
View Related
Mar 25, 2005
I would like to create the following functionality on a form in my database:
When the form is open, and a record is displayed on the screen, I want to add a button that will open up a second form displaying information related to that record.
To be specific, I have a form called "Contracts". Each contract record contains a customer name in the field "Customers." I want to create a button labeled "Customer Details" that will open a new form, "ViewCustomers" displaying the record associated with the value entered in the "Customers" field for the current (displayed) record only.
I have been trying to use a hyperlink to a macro that uses "OpenForm," form name "ViewCustomers," but I don't know how to filter it down to just the current record.
I hope any of this makes sense. Any insight would be really helpful.
Thanks! -Matt
View 2 Replies
View Related
Apr 19, 2005
I've created a form with Record Navigator which allows a user to create a new record. When the form is opened how do I immediately put the user into add mode by default?
Thanks
View 2 Replies
View Related
Jun 1, 2005
I am having trouble with a continuous form setting Enabled to False in the current record only. I have tried code in the OnCurrent of the form and OnOpen, examples like
If Me.NewRecord then
Me!Quantity.Enabled = False
.....
also
If Me.NewRecord = True then 'if this makes any difference?
Dataentry is set to Yes and have tried No also with no difference.
So I can set all [Quantity].enabled to false but I only want to set the New Record, not all the records I have already created.
Any help would be appreciated as I still have a pretty basic knowledge of Access
View 5 Replies
View Related
Jun 24, 2005
Hey,
Can someone pls tell me how to close a form as soon as it gets deactivate? Becouse i try with Docmd.Close but it tells me that i can not do that in this event, but thats exactly what i would like to do - close form when it gets deactivated?
Thx
View 4 Replies
View Related
Jan 23, 2006
Hi,
on a form with several subforms i have ran into some trouble. I have the subforms use code to determine if a scrollbar is needed. As a recordselector I use a listbox on the main form.
When i close the mainform, it sometimes makes a popup box appear saying that there is no current record.
Sofar I have determined the following :
- Removing the code from the form, removes the error.
- The code is only executed when selected records in the listbox have related record(s)
- The error only occurs when the code is executed at least once and the last selected record has no related record(s)
I dont know if altering the code would have any success, cause it won't run anyway when I select the last record (with no related records).
I guess moving the code to another section would be better, but I've tried other options like 'on focus' etc, but could not find one that responded.
HELP PLZ :)
Private Sub Form_Current()
On Error GoTo Error
'kijken of verticale scrollbar nodig is
maxRegels = 14
Dim rstCount As DAO.Recordset
Set rstCount = Me.Recordset
If rstCount.RecordCount > maxRegels Then
Me.Form.ScrollBars = 2
Else
Me.Form.ScrollBars = 0
End If
Error:
If Err.Number <> "0" Then
Else
MsgBox Err.Number & " " & Err.Description
End If
Exit Sub
End Sub
ps. I've tried to catch err.Number = "3021" in the Error: section, but without success
View 5 Replies
View Related
Oct 19, 2007
I'm really new at this Access database, but I've managed to create a database, tables, forms, macros, report and a switchboard, most of which work. Printing the current form command button works great.
I really need to email the current form or record, but can't seem to figure it out. I can email the report using the snapshot format, which is what I'm after, but it includes every record. If I email the form, the format has to be chosen and it doesn't look like the report.
Can someone help me with this? Thanks so much, Jolene
View 3 Replies
View Related
Nov 19, 2012
i have list box which lists all active records. raw source is based from Main Query which lists all active records from current user. on click even of list box i have macro that goes on record selected in list box, which is working fine.on current event of main form function is called. Main Query order by id Desc, list box order by is Asc problem is when i click on last field in List Box which takes me to record, On Current event does not trigger on main form. if i use Record Selector on main form to go to that same record,On Current triggers.
View 2 Replies
View Related
Aug 26, 2013
I have a database that includes the following items related to my question:
- Tables: tblCases, tblPeople, tblPeoplePerCase,
- Forms: frmCases, frmPeople, subfrmPeoplePerCase, frmSearchPeople
What I'm trying to do is automate the process of adding a selected person to a particular case. What I'm thinking is that frmCases (which includes subfrmPeoplePerCase) will include a button to add a person to the case. Once clicked, frmSearchPeople would open. Once a person is selected and frmPeople displays their information, a button would then be displayed/enabled on frmPeople to add them to the current case in frmCases. Once this button is clicked, it would display a message box asking to confirm if PersonID should be added to CaseID. If confirmed, the information is then appended to tblPeoplePerCase (which includes PersonID, CaseID). The user is then brought back to frmCases and the subfrmPeoplePerCase displays the newly related information.
View 1 Replies
View Related
