Command Button Default Property
Aug 4, 2005
hi all,
i am trying to find a solution for this.I have a continous form which displays records..for every record there is a command button which opens the other screen for that particular record.
when ever i hits the enter key the command button opens the another form for the 1st record in the continous form.I want to disable this.
i set the default property to no but it not working .I also tried to to do it by vb code like
cmd.default=False
on the page load but it still not working.
any solution for this pls.
thanks
View Replies
ADVERTISEMENT
Jan 3, 2007
Hi all,
Is it possible to change the Background color of a command button?
Whan I right click in the properties of the command button I cannot see a BackColor property. Further, when I programatically try to change the BackColor property in VBA I get an error message.
Thanks in advance
Kabir
View 1 Replies
View Related
Nov 7, 2005
I have a form which contains several controls and a listbox. I have set the Default setting to yes for a command button that returns the results of the search, so when i click the Enter key on any control (with the exception of other command buttons), the result is returned.
Question: I want to prevent the Default command button from activating when pressing Enter from the listbox.
I thought of using the KeyDown event with this code
If KeyCode = vbKeyReturn Then
'do something
End If
but i can't get it to disregard the default
Suggestions?
Scott
View 1 Replies
View Related
Aug 13, 2014
I have a continuous form based on table "INCOMES" that shows all the payments received, which mediums can be (field "PMNT_MEDIUM"):
- check
- transfer
- taxes
- cash
Table "INCOMES" is filled using another form, but in this particular form I just want to show "check", "transfer" and "cash" (not "taxes") so that I can track all the cash incomes.
Note: taxes are loaded because they appear in my invoices and I need them there to reach the invoice total amount.So my form has a search bar which allows me to search by PMNT_MEDIUM listing all "checks", all "cash" or all "transfer". I can also search by payment number (meaning: check number). To that end I have a "search" button that applies the filter. And I have another button that "cleans" the filtering by "putting a "" in the search-bar and then calling the "on click" of the search button".
What I need is, no matter if I click over the "search" or "clean" button, it NEVER shows me the "taxes".Search button, on click code:
If IsNumeric(Me.busq_chq_med) Then
Me.Filter = "[PMNT_MEDIUM_NUMB] =" & Me.SEARCH_BAR
Else
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*' or [INVOICE] like'" & Me.SEARCH_BAR & "*'"
End If
Me.FilterOn = True
Clean filter button, on click code:
[SEARCH_BAR] = ""
Call [Search button]_click
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.FilterOn = True
View 14 Replies
View Related
Oct 20, 2005
Is it possible to use a subquery as a default value property setting?
I need to use a value from a table that is not the focus table of the form, I have tried to identify it with a subquery but it returns a #name? error every time. I hate those!
Any help would be appreciated.
View 5 Replies
View Related
May 22, 2013
I have a combo box that takes it's data from a table called tblFruitBasket. What code do I put in the Default Value property such that the default value is the fifth element (or say fifth row) of field [Fruit] of table tblFruitBasket?
View 2 Replies
View Related
Feb 13, 2013
My access db is used to compile payroll time records bi weekly. The Work Hours table is used to hold two weeks of time records then they are archived to a history table. Each week has its own week ending date. I have been updating the default value of the week ending manually in the table field property in the table's design view. Is there a way to have a macro update this default value?
The current process is, open table in design view, update week ending default value, enter payroll time then change default value again for second week ending, enter payroll time. Report hours to accountant, archive table to history table.
View 1 Replies
View Related
Feb 26, 2014
I have a form with a subform where I want to select (via button) which format to open the form in. Opening the form is simple, DoCmd.OpenForm (FormName),acFormDS to open in datasheet, however, the subform opens in default view (single form). Can you programmatically set the property on the subform to change the Default View from Single Form to Datasheet and back?
View 3 Replies
View Related
Dec 4, 2013
Access 2007
In a table I have 2 fields:
D1 , Date/Time , DefaultValue: Date()
D2 , Date/Time , DefaultValue: Date()+1
In a form (bounded to this table) I have, of course, 2 controls bounded to this fields:
txtD1 and txtD2
If the user change the value in txtD1 (using the Date picker) I like to change the DefaultValue for txtD1 to the new date and the DefaultValue for txtD2 to the new date + 1 day. Something like this:
Code:
Private Sub txtD1_AfterUpdate()
Me.txtD1.DefaultValue = Me.txtD1
Me.txtD2.DefaultValue = Me.txtD1 + 1 day
End Sub
I tried whatever crossed my mind... with the same "result" : #Name?
My Regional settings:
Short date format: dd.MM.yyyy
Date separator: Dot
Simple: 05.12.2013
View 14 Replies
View Related
Dec 17, 2013
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies
View Related
Feb 19, 2014
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
View 9 Replies
View Related
Mar 5, 2015
Is it possible to use WHERE in the Control Source property of a button on a form?
Something like this
= [Station Status]![Done] WHERE [station Status]![ID] = "28"
View 6 Replies
View Related
Aug 12, 2005
Hi, I have got a small problem and maybe someone could advise me.
I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click()
Me!itemquery.Requery
End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.SpecialEffect = 2
Me.Labelsearch.BackColor = 255
Me.Labelsearch.ForeColor = 10092543
Me.Labelsearch.FontItalic = True
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.ForeColor = 255
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
'Come back to initial state when button release'
Me.Labelsearch.SpecialEffect = 1
Me.Labelsearch.BackColor = 16373685
Me.Labelsearch.ForeColor = 8388608
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End
If I create a command button with the wizard and assign the code :
me!itemquery.Requeryto the on_click event my form is working fine.
Why is his code is not working if I assign it to a label? :o
View 6 Replies
View Related
Nov 8, 2013
In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.
I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.
View 3 Replies
View Related
Oct 11, 2006
Hi there
I have a form that should allow data to be carried over to another form. I have a toggle button that once pressed, will allow me to do this. As most of the time i will need the data to be carried over, but occasionally, i wont. Is it possible to set the default of this toggle button as 'pressed' (so it looks like the toggle button has been pressed when you load the form)?
Thanks in advance :)
View 2 Replies
View Related
Apr 20, 2006
I have been working on this for awhile, and can't figure it out for the life of me!
I have a form set up with a drop down box that lets me pick from values from a table based off of the Primary Key of that table (Row Source = SELECT Order.OrderID, Order.OrderName from Order). I have a button on the form that I want to set a value (Closed) from the table entry based off of the order selected.
Pseudo code would go something like this.
Closed.Value = True Where Table.Order.OrderID = SelectedOrderID
Table.Order is a Table Named Order (obviously)
Closed is a yes/no field in my Order table
OrderID is the primarykey of the table Order
SelectedOrderID is the drop down box.
Any help would be greatly appreciated!
View 3 Replies
View Related
Apr 26, 2005
I, unfortunately, have been singled out as the Access guru in my work area. We have 223 people and the Information Manager has tasked me to modify a database he "found" to be able to track a number of things, but most important to him: performance reports.
I have posted the sample of what I currently have. What is being asked of me is a way in which to have a button or by double-clicking a block where a date would go for all other dates on the form to become non-visible while the current date stored in the computer the database is being worked from be entered in the block where the button or double-click happened. All this links to a report for the IM to be able to track what performace reports are out, and when they are due back to his section. He also wants me to be able to show which are overdue and where they are at. I am not sure if it is at all possible, but with me having spend most of last week purusing the articles on Access here, I know now that nothing is implausible if you happen to go about it the right way.
Since I have read the rules on posting, here is what I have done. I searched the forum for command button and got a lot of really cool ideas to use elsewhere in the database. I looked up the help in the program itself for command button, and got some good information on how a command button works, but I cannot make it put a date into a block. I can enter the date in any block that is a date format, but then I have dates in every block. He only wants to see the most current date in any of the blocks.
Any assistance at this point would be appreciated. If I have missed something in another thread, I apologise in advance.
View 11 Replies
View Related
Apr 28, 2005
how can i assign a formula to a command button?
also can anyone give me specific advice about calucalating the % of check boxes ticked across multiple records.
thanks in advance
View 4 Replies
View Related
May 25, 2005
A couple of weeks ago I asked the question of how to send a single record from one table to another (Archive table) using a command button. I got a response. I have had time to work with this a little. My problem is I keep getting a error message "Run-time error '3075'; Syntax error (missing operator) in Query expression "[New ID]='. I wanted to mention that the archive table has an "archive ID" field as well as "New ID" that links the tables. I have the following code. Please help with this if possible.
" Private Sub Command667_Click()
' Save the main record if it has not been saved.
If Me.Dirty Then
DoCmd.RunCommand acCmdSave
Me.Recalc
End If
If MsgBox("Do you want to archive this record?", vbYesNo) = vbYes Then
Dim SQL As String
' Move main record to Grants Activity Archive.
SQL = "Insert into [Grants Activity Archive]" & _
" select * from [Grants] where [New ID]=" '" & Me.ID & "'"
CurrentDb.Execute SQL
Me.Recalc
End If
End Sub "
The error seems to refer to the & Me.ID section. I have tried putting Me.New ID and also Me.Archive ID. The Grants Activity Archives is the subform where I want the record to go. This subform is set up like a form with many fields so it is a lot of work to type the main record from the Grants table to the Grants Activity Archive table every time you want to archive a record. I hope that makes sense.
View 4 Replies
View Related
Feb 26, 2008
Hi all
Can any one correct my attached program to make it works with one command button only please?
Using two buttons make conflict.
Any help will be highly appreciated.
Thank you
vbnt
View 9 Replies
View Related
Apr 7, 2006
Hi I can't seem to be able to find any option to open a table from the command button wizard how is this possible. Thanks
View 2 Replies
View Related
Apr 20, 2006
Hi,
How can I make command button on my DAP to use update query that I wrote? :confused:
View 3 Replies
View Related
Mar 2, 2005
Hi everyone,
This is perhaps a simple question for which I have not been able to find an answer to. I've been trying to create a form which contain command buttons, but the problem is that the look of these buttons are not similar to those found in Windows XP.
I know it’s purely cosmetic :cool: - but how do I make my buttons in Access 2003 to look like those on my Windows XP?
I've seen some samples here on these forums which have the 'XP' look. Any hints on how to do this would be greatly appreciated.
All the best,
Sab.
View 2 Replies
View Related
Mar 23, 2005
Hi
I have a option group with 6 command buttons. The trouble is when you select a button, the button stays selected, so if you want to select it again you have to select another butoon then go back to it (hope this makes sence!). Is ther a way to re-set the button so it returns to un-selected mode!!!!
Thanks in advance!
View 5 Replies
View Related
Apr 14, 2005
Question One
I want to create a command button in the form view that once pressed opens a folder that contains a photograph. I assume that I need to use a hyperink but how is it done?
Question Two
When in the form view and I press a 'Find ' button that I created I want to have a combo box/list box on the find. The alternative to this is that the reader has to remember all of the subjects. With a combo box/list box, or similar, the user can scroll down the list and pick and choose the subject to search for.
I would greatly appreciate any assistance on either question.
Cheers.
View 1 Replies
View Related
Apr 23, 2005
hey guys...
is there a VB code by which i can tell a command button to add a new record in a specific table ???
View 7 Replies
View Related
