Hello,
I am just wondering whether there is any query I could use to compare the data on, say, whether all data in Table A are in Table B although some records in Table B may not be in Table A and give me the record that is in Table A but not in Table B.
Hi, I am trying to compare two columns' values within the same QUERY table, but I kept on getting the "Data type mismatch in criteria expression" error. What am I doing wrong?
Here is my Select Query Statement: SELECT qryDedparmDedetail.EMP_ID, qryDedparmDedetail.[Employer Amt], qryDedparmDedetail.[Employer Actl], qryDedparmDedetail.[Admin Amt], qryDedparmDedetail.[Admin Actl], qryDedparmDedetail.[Employee Actl], qryDedparmDedetail.[Employee Amt], qryDedparmDedetail.FirstOfSTATUS, qryDedparmDedetail.FirstOfAGENCY, qryDedparmDedetail.FirstOfTITLE, qryDedparmDedetail.FirstOfFORMAT_NM, qryDedparmDedetail.RepUnit, qryDedparmDedetail.FirstOfDEDTYPE_CD1 AS Expr1, qryDedparmDedetail.SumOfNBR, RepUnit.REPUNITDESC, qryDedparmDedetail.LeftType FROM qryDedparmDedetail LEFT JOIN RepUnit ON qryDedparmDedetail.RepUnit = RepUnit.REPUNIT WHERE (((qryDedparmDedetail.[Employer Amt])<>"Employer Actl") AND ((qryDedparmDedetail.LeftType)="01"));
Here is what I am trying to do: I have form, and a table which is created from this form. The data is entered a second time using the form to make sure there are no discrepancies.
Any easiest way to implement this? (create a new table (which is duplicate), and then compare them?
I have a table with four columns - A, B, C, D I want to compare the values in columns A, B and C in row 1, with the values in row 2 and if they are the same, I want to copy the value that is in column D in row 1 into column D in row 2. I then want to move to the next row in the table and compare the values in row 2 with the values in row 3 in the same way. This will continue for all rows in the table.
Any help would be greatly appreciated as my VB is not up to much.
Hi I'm using MS Office 2000, I have an Access database table that contain many fields, namely I need to update FieldA from an Excel Spreadsheet according to the specified primary key of CustomerID. Is there a way to write automate process to import the records from an excel spreadsheet and then place those records in FieldA of the Access Database according to the corresponding CustomerID? The reason I ask is that these two fields are not exactly in the right order in my spreadsheet and my table and to do it manually will take lots of effort.
This is probably quite easy but I cannot make it work so would appreciate some help. I have a table containing vehicle information. I have 2 fields, Current Mileage and Max Mileage. I want to do a comparison of the 2 fields and should the Current Mileage be greater than the Max Mileage, the query returns the Vehicle Registration. Test data has been entered in the table I am querying and I was expecting 1 value to be returned. However the query as I wrote returned either all the vehicle Registrations or none of them. Can someone help with this please.
I'm willing to be this is simple, but I haven't been able to figure it out.
I have created a database with one table, tblUserData. I have one form called frmLogin.
tblUserData has two fields, Username, and Password. frmLogin has two textboxes for user input, User and Pass, and has one control, cmdLogin.
What I am trying to do is - When a user types their username and password, and clicks on the control button, the value of User.Value is compared to the Username field of the UserData table. If a matching record is found, then Pass.value is compared to the Password field from the matching record. If they match then the program proceeds.
Can anyone point me in the right direction please?
I am trying to create a query based on a transaction table which compares the time between two types of transactions.
The initial record would have "A' in the type field and the second record would have "D" in the type field.
each pair of A and D records would be matched on o_time and idnum fields, and I would want to pull each pair and us the datediff function on c_time, using records marked with A as the initial time and records marked with D as the followup time.
Is there any way to accomplish this in a single query or do I need to create two subqueries?
I have a form that users put in information and then it updates to a table. It works fine but i would like to add something. Right now there is a text box called item that the user puts in the item number. The problem is that sometimes they put in a wrong number. What i would like to do is have it when they hit the update button to compare that item number to a table that lists all of them. so if the text box doesnt equal one of the numbers in the table dbo_item and the field itm_num, i want it to give them a message box with an error.
I am running into an issue when trying to compare data stored within the same table.
tblParcels - holds data relating to an individual parcel of land; unique identifier is ParcelID. No repeating data.
tblValues - holds data relating to the value(s) of each parcel; new values entered annually; unique identifier is TaxID; has field to link to tblParcels. One parcel can have multiple entries for each year tracked.
I have two unbound text boxes on frmMainForm where users can enter Tax Years to compare (txtYear1 and txtYear2). Theory being that users will be able to select any two tax years and compare the parcel values.The report (rptMaster) is built using three queries and is used to show the change in value between txtYear1 and txtYear2:
qryYear1 - pulls all values from tblValues where the TaxYear equals the year typed in txtYear1.
qryYear2 - pulls all values from tblValues where the TaxYear equals the year typed in txtYear2.
qryCompare - joins the results from qryYear1 and qryYear2, along with other common fields, and populates rptMaster.
My problem lies when a parcel does not have any values for one or both of the years entered into the text boxes. I completely understand why, qryCompare can't show any records if there are no results coming from either qryYear1 or qryYear2. What I am not getting is how to work around this issue.I would like for the report to show "$0.00" for the value if there is not a value for that Parcel in tblValues for the year entered.
tblValues example data: TaxID ParcelID TaxYear Value 1 5 2011 100,000 2 5 2012 200,000 3 6 2012 75,000
In the example above, when comparing 2012 values to 2011 values, my report shows the values for ParcelID 5 but not for ParcelID 6 as it does not have a 2011 value (and won't since information about that parcel didn't exist in 2011).
I am programming an Acess Database, the primary data come from an excel sheet. Since Access one to many relationship only works for primary key and another field in another table as foreign key, I can't have normalized database.
I will explain what I mean with a hypothetical situation.
So, let's say I have two tables: WindowT1, CustomerT2.
WindowT1 has fields: WinID (the pk), WindowName. CustomerT2 fields include CustID (pk), CustomerName, WindowName, WinID.
So, in table "CustomerT2', WinID is the foreign key and I need that field filled in to make one-to-many relationship between these two tables to work. CustomerName and WindowName will be imported and prefilled already from an excel file with append query.
My question is can I make a update query (after the initial append query that brings in the data into Access) such that the criteria is matching WindowName (from CustomerT2) and the update would be the corresponding WinID (the pk number from WindowT1) that would be filled in the field WinID (in CustomerT2)? I know for this to work tables must have relationship and I did that.
Is there a better way to accomplish this task? i.e. through a form (remember info will be prefilled, so can't use combo box to fill in another form field) or maybe can I do this using the first append query (that brings in data)?
I am not good at Macro or VBA. The only thing I have done in code builder is After Update event in forms while using combo boxes. So, if there is no easier solution, I will try to deal with codes.
I have a table that shows Part Numbers. Each part number can be listed multiple times depending on how man Build ID's it is associated to. Example: Part Nubmer 123456 could be associated with: Build Id's F187, A910, F001, C810, E010, C809 or it might only be associated to 1, 2, 3, 4,or 5 of those Build Id's. What I want my query to do is find any Part Number that is only associated with anything less than all six of the Build Id's. Example: Part Number 123456 is only associated with: Build Id's F187 & A910 or only F001 & C809 or only E010. If this was the case I would like for that Part Number to show up in the Query along with whatever Build Id's it is associated with as long as it is not associated with all six Build Id's. The Build Id Field is also part of the table.
I am making a dp for end of day sales, and i want to compare data in a table to the numbers inputted in a form and see whether this value is higher or lower. the table displays the target sales figures for each day, and the form allows the area mangers to enter in the current day figures.
Is there a way to compare the value in one field with the value of the same field in the next record? I can do it in Excel by using the following formula:
=If(A1=A2,"Match","No Match")
But I need to be able to do this in an Access query?
Date...............Item...................Status 200601............A........................OK 200602............A........................Not OK 200601............B.......................OK 200602............B........................OK 200602............C........................OK
I want to construct a query which can only show result as follows: 200601............A........................OK 200602............A........................Not OK 200602............C........................OK ..by comparing the status change
Any brilliant idea? (preferably not using dlookup)
sql1="select * from Exam where StudentID ="+s1+"and dateField='"+dateField+"'";
I am trying to compare the date given in the text field and the date in the table . I am getting Data type mismatch in criteria expression. Can anyone suggest me a correct query .
I'm working on creating an events log. In my table I've got a field that pulls the individual's username (that they use to log into the computer) and logs it against their log entry.
As part of my query (for my daily events log report) I'm pulling up said username.
I'd like to give access to the specific user to edit his (and only his) entries from the report, but I'm getting a type mismatch with the below code:
Code: If me.UsernameID = "KraussLJ" Or Environ$("Username") Then DoCmd.OpenForm "frmShiftLog" DoCmd.FindRecord Me.ID, acStart, , acSearchAll, , acAll Else MsgBox ("You are not authorized to edit this entry") End If
(before you ask, "KraussLJ" is our ops manager who insists on having final editorial control over the shift log before sending it higher up the chain)
I can get the msgbox to run if I block out the
Code : Environ$("Username")
, but beyond that I'm a little stuck. Should this be a dlookup function or am I overanalyzing this way too much?
I'm trying to create a query that will compare the data in 3 fields in a record, choose the largest (I also have a criteria to order by if more than 1 field has the same entry and it's the largest of the 3), and then group by that.The fields I will need are as follows:
PRODUCT table: ProductName Chemical ChemicalAbstract PhysicalState NFPAHealth NFPAFlammability NFPAReactivity
qryQuantityOnHand query (which doesn't link directly to the PRODUCT table, it links through associations with other tables):QOH...I will eventually need information from another table for the final reports, but I don't think it has to be included in this query.
The fields NFPAHealth, NFPAFlammability, and NFPAReactivity each may be 0, 1, 2, 3, or 4...I need to ignore blanks; if 1 of the above fields is blank, they will all be blank.For any record, I need to compare the number in those 3 fields to each other, and choose the largest number and group by that rating.
In other words, if the largest of the 3 numbers is a 3 in the NFPAFlammability field, all those products need to be grouped together.If the same number appears in at least 2 of the fields, the order that determines the grouping is: Flammability, then Health, then Reactivity..Ultimately the report will be grouped as follows:
and each of the groups will be sub-totalled.I'm stumped at trying to create the query in the first place.The added aggravation here is that we are dealing with 23 stores, each with their own mix of products. I have another table that contains the information about which products are in which store.
Hi all I want to view vehicles due for servicing in the next week. The queries giving me this information work fine. I have a form that I can select, from a drop down box, either 1,2,3 or 4. A report is then run and emailled to the appropriate people. After testing to see what was the easiest way to remember what the last week was (I tried setting the combo box to remember the value but it did not, unsure why, I also tried recording Mondays date in a field in a table and assigning each Monday a value 1-4 then running a query...long story short, to time consuming) I have used a table with one field to hold the value and after emailling the report, an update query adds one to this field and it is displayed above the combo box in a txt box. I want to reset the value to 0 if the value equals 4 before the update query runs. Is this the best way to do it or can someone suggest another way of doing this. Thanks in advance Craig
I have a form where when the user clicks on the browse button then excel workbook filepath gets stored in the textbox as below:
Code: Private Sub CommandButton1_Click() ChooseFile End Sub Sub ChooseFile() Dim fd As FileDialog Set fd = Application.FileDialog(msoFileDialogFilePicker)
[Code] .....
Please see attached the excel workbook. Everytime the user will select Excel workbook using Browse button. Now in that file , the first sheetname will always be "Summary". I want to perform the following steps:
1. So now I want VBA code to copy the data from columns "Withdrawn","Obsolete","Updated","LitRef" from Summary sheet to the Access table named tblSummary.
2. When the data gets copied in Access table then write So VBA code that will check if the data in field LitRef in table "tblSummary" is present in field "Reference" of Access table "tblliterature" . if its present then check in the tblSummary , which corresponding fields out of "Withdrawn","Obsolete" and "Updated" stores "Y" . 3. If "Withdrawn" field value is "Y" then change the status of corresponding record of tblliteraure to "Withdrawn" 4. If "Obsolete" field value is "Y" then change the status of corresponding record of tblliteraure to "Obsolete" 5. If "Updated" field value is "Y" then change the status of corresponding record of tblliteraure to "Updated" .
I have a table of customers who report trouble on their equipment. I would like to compare the date in the current record to the previous record to see if it occurred within 30 days. Can I do this with an SQL query or expression?
I am putting together a database for work, I have a table that is used to refer to (this table is part of our production system) in this table it lists products run, dates run and who has run.
I have the training records data table, this lists; who, machine and status: "trained" "refresh required" " not trained"
I want to build a query so that it searches the production table for the last 6 months worth of records & if an operator that is in the training table (WHO) as status (trained) is not in the production table it outputs a "to be refreshed" report or amends the records from trained to "refresh required" ...
I am building a tracking database where we would be able to track information which field are null data and report them to our Administration to fill the null data. For this I have created a form name "Search" and I have a combo box control on that form which is bound to "Table = employee" and its ROW SOURCE TYPE="Field List", I would like to able to query records where the selected value in this combo box is null through out the table.
For example if I select "Telephone" from this combo box dropdown, I would like the query to show all the records where the "Telephone" is null, how to set the criteria in query to take the combo box value as "Field Name" and then compare it with the Field/Column in the table and show the null values.
I have to write a code for my database,i have folder with files "pending Review" and a table with column "tblExcelLocation". when i run my database all the files from pending review folder goes to "tblExcelLocation" on a click of button.But,if the files already exists it should not insert those files and insert the rest.For this i tried to write a code but i think i m unable to do that .
Code: Loop through files in folder folderspec = "O:QA FilesQC ReportingPending Review" Set fs = CreateObject("Scripting.FileSystemObject") Set f = fs.GetFolder(folderspec) Set fc = f.files