Conjunction Table Data Entry
Aug 22, 2014
i have 2 tables, "Items" and "Locations" and i created one to many relation from each table to 1 conjunction table, and Added one extra field called quantity into the conjunction table, so now the conjunction table has 4 Fields, ID AutoNumber and "Item" "location" "quantity" Fields, ok and i turn it into query then put the fields in form and use it as a data entry
im looking for a way, where if I choose an item From the item combobox, the locations where this item has quantity in it, would be available in the locations combobox, so i can add on the existing quantities...or to make it eazier, when i choose an item, it would let me choose all the location names which have this item next to it, so i may ( edit and add) the previously set quantity field
View Replies
ADVERTISEMENT
Jan 5, 2013
My question is this: I have a table where I'm entering employees' hours worked. Basically, it's something like this:
ID WorkerNumberDateworkedTimeStartTimeEnded
121/2/201310:00:00 AM3:00:00 PM
221/3/20132:00:00 AM11:00:00 AM
321/4/201312:15:00 AM11:30:00 AM
421/5/201310:25:00 PM11:00:00 AM
531/2/201311:00:00 AM3:30:00 PM
631/3/201312:00:00 PM10:00:00 PM
731/10/20137:00:00 AM4:00:00 PM
I have a query that (easily) determines how many hours an employee has worked on any given day. What I can't figure out at all, is how to write a query that can figure out how much time an employee had off in between shifts.
Thus far I'm able to run a query that separates this main table into individual workers by their id numbers, but can't figure out how to determine time off between shifts - as the last hour worked one day, and the first hour worked the next day are on two different lines (they are two different table entries).
View 4 Replies
View Related
Dec 18, 2007
Hello all,
I just wanted to run this by some experts before I go mucking around in my db. Basically, I am creating a data entry form to populate with information about car parts, and the vehicles they apply to. This is what I am working with:
tblParts tblModelsParts tblModels
PartID ModelPartID ModelID
PartNumber PartID ModelNameID
PartDesc ModelID ModelYearID
I am trying to build a form that will allow me to enter new part numbers and descriptions into the table, and then have the user select (through a listbox?) all the vehicles the parts apply to. Is there a way to populate the junction table with each combination of partID and ModelID automatically? NOTE: tblModels is already populated with data.
I am assuming there would be a way to do this... A query of the junction table (and tblModels?) as the recordsource for the form, and then a subform with the tblParts as its recordsource?
I would have posted this in the massive thread I have going already... but I thought it might be nice to give Craig and Adam a break from helping me :o
View 14 Replies
View Related
Oct 8, 2007
I have a table that lists county names. On the data entry form only the county names are displayed. However, I have another form that is used to build a custom query based on various criteria, of which county is one.
To make the table compatible with both both forms, the data source for the dropdown list for data entry is: Select * FROM county WHERE county <> "No Selection"
For the SQL form the code is simply: Select * FROM county The default value of the dropdown list is "No Selection". When dropdown list for county is set to "No Selection" the program interprets it as "select all counties". Other dropdown lists provide other parameters such as the project year, nature of the project etc. Each of these other dropdown lists also have a default value of "No Selection". The SQL form thus gives me the ability to mix and match several criteria. For example, it will display all projects in a particular year for a particular county or all projects in all counties that involve the construction of a residence.
My question, instead of physically having the string "No Selection" in the table itself, is there a way to embed the phrase "No Selection" in the SQL expression itself and still have it as an option on the dropdown list?
View 1 Replies
View Related
Aug 23, 2006
Okay, for simplicity's sake, I have a data entry form.
It is bound to tableData.
Inputs are:
ProductID
Customer Name
ProductID is a combo box.
There is another table called tableProduct. In this table, is ProductID and ProductName.
For convenience sake, when a user chooses a ProductID from the combo box, I want it to lookup that ID from tableProduct. However, how can I do this when everything is already bound to tableData?
Thanks in advance.
View 1 Replies
View Related
Aug 23, 2006
Okay, for simplicity's sake, I have a data entry form.
It is bound to tableData.
Inputs are:
ProductID
Customer Name
ProductID is a combo box on the form.
There is another table called tableProduct. In this table, is ProductID and ProductName.
For convenience sake, when a user chooses a ProductID from the combo box, I want a separate textbox to lookup that ID from tableProduct and display the ProductName.
How can I accomplish this?
Thanks in advance.
View 2 Replies
View Related
Aug 15, 2007
I'm new to access so I thought this would be easier than it is. I have a list of cities in a simple table . I want use this list (or a query of it) to create a validation rule for a field in a second table "City". How, either with VBA or some other method do I use the Cities database to validate entry. These tables are both in the same project.
Any help is appreciated.
View 2 Replies
View Related
May 17, 2006
Hello,
New to access :eek:
Trying to create a simple data entry form to get information and populate fields from another table. i.e. type in info in one field and the other fields are displayed in the form with information from another table.
Any help apprecated :)
View 3 Replies
View Related
Nov 11, 2013
I have a field in a table that keeps rounding the data entry off. It has identical properties to the field next to it but one rounds and the other does not. I tried deleting the field and creating a new one.
View 5 Replies
View Related
Oct 8, 2014
I am creating a table for data entry. Three fields in the table are going to be Firstname, Lastname, and Address. I want the choices for data entry to be read from a master table which contains first and last names and town of residence.
That being said I would like the choice of Lastname to be all last names from the master table, and the choices of Firstname to be those from the master table but are limited to having the Lastname as entered in the previous field, finally I want the Address field to be limited to those records which match the lastname and firstname. I have been playing around with lookup queries for each of the fields to no avail.
View 1 Replies
View Related
May 1, 2013
I'm trying to build a form based on a table where the user can also enter data to update the table but with data fields not originally in the table. Below is a summary of what I have and what I need:
1.) A file that will be uploaded daily into a Table (ie name Denials extract table).
2.) A form bound to table Denials extract
3.) Additional fields that will be updated by users that is not included in this table b/c they are not available in the system we are getting the data extract from.
4.) The user will look up a key field that will allow them to review it in our system. Once they "work" the record, there will be multiple fields that they will update with this information that are not in the bound recordsource (table Denials extract).
Do I create another table with these fields even though they will be blank at first and make them a subform that will have a "primary key field" that will link the main form with the subform? Will they need to "update" a whole new table? Not really sure how that would work since they will be updating fields not in the bound table.
View 8 Replies
View Related
May 8, 2015
I have a simple data entry form based on a table. However I have a few fields that I do a lookup in a field on the form from a query, and yes I know I should not have a lookup in the control source however, this is the way that I will be doing it on this occasion.
=DLookUp("[Salary]","[Salary Query]")
How I get the value from this unbound field to enter into the actual field in the table. Do I bring the actual field into the form and hide, and do some sort of after update, as I have tried and it does not work.
I have called the unbound field with lookup "Salary Level Base" and the actual field in the table is "Salary Base".
View 5 Replies
View Related
Oct 21, 2014
I am creating a form for data entry into my main table. It shows all the fields including a name, date, id number etc.
I am trying to put a subform on the form containing a query. The query has two filter parameters fed from two unbound boxes on the main form (date and name). Their purpose is to filter records on the query to just show those for one person on one day. It also calculates a duration based on a start and end time. The query results are ok.
I can't get the query to display properly in the subform.
Subform Properties/data/source object is set to the query name. I'm told i have to link the master fields and child fields but when I try I get the error 'can't build a link between unbound forms'. I thought all that was necessary to bind forms was for there to be a common field between the form and query? Both contain fields from the main table including date, name, start time and end time etc.
View 4 Replies
View Related
Nov 29, 2014
I am trying to open TabCtl86 forms in AddData mode if there are no records in a table for a user chosen form cboClientSearch. The tab control has three pages on it. At the moment I am getting an error saying "the form named '0' is either misspelled or doesn't exist".
I am using this at the moment; DoCmd.OpenForm Controls!TabCtl86, acFormDS, , , acFormAdd, acDialog
View 1 Replies
View Related
Aug 31, 2006
My situation is this. I have 3 tables that I have imported from my mainframe system, between these 3 tables I have the data of product code, description,supplier code, supplier name, order method, and ABC code.
I am trying to create another table that I can capture daily Out Of Stock data for products.
What I would like to do is to enter the product number in the first field of my new table, and then the remaining fields will auto populate with the correct details based on the product data stored in the parent tables that I have imported.
How can this be done?
View 3 Replies
View Related
May 30, 2015
table name : Schedule
Field 1 = Vessel code
Field 2 = Voyage
Field 3 = ETA
Field 4 = berthed
Field 5 = Sailed
there is a query by using above table and data entry form based on that query.
need to add following facilitate
While data entering, if given voyage number is already exist for the particular vessel code, msg should be pop up immediately at that time saying " This voyage number is already exist"
How could this be manage ?
View 4 Replies
View Related
Jan 31, 2014
What I am trying to do is create a data entry form to an "order table" using 2 cascading combo boxes. I have created a data entry form based on a query. I can't get the cascading combo boxes to work properly.Here is the code:
Private Sub Combo0_AfterUpdate()
Combo2.RowSource = "SELECT L2_ID,L4_Element_name,L5_Category FROM qry_ord WHERE L3_ID = Combo0.Value;"
Combo2.DefaultValue = [Combo2].[ItemData](0)
Command4.SetFocus
End Sub
[code]....
View 2 Replies
View Related
Mar 9, 2006
First I would like to give thanks to all the knowledgeable folks here who have helped me with my DB to date. It is working and every one is very happy and I have learned a lot.
So now I would like to add some more functionality to this existing project.
My DB is for data input of customers for a drawing. It has the following fields: Id, account number, first name, last name, date/time, score1, score2.
I t is taking a great deal of time for the users to enter in hundreds of entries a day. Most of the entries are customers who are already in the DB. I would like to get the fields to auto fill the data for existing customers say after the account number is entered. So after you put in the account the name and any other pertinent data would shows up saving users from typing it in again.
The first problem I am having is that this is still a data entry form and I can’t figure out how to be able to see the account information and still add new data to the record? The new data is a daily score they get.
Second I haven’t figured out how to call up the customers information from just the account field.
I’ve googled this and haven’t found anything terribly helpful.
View 2 Replies
View Related
Mar 5, 2015
I an trying to create a data entry form (IndividualsEntryFm) to input data for fields such as (First Name),(Birthdate) etc., these to be saved to the (IndividualsTbl)
I also have another table (NamesTbl) which has family names etc. The two tables are linked by a (MainID) field. I want a combo box on the individualsEntryFm so that I can select the family name. Then I wish the empty fields for the IndividualsTbl to be available to enter data.When I press the save button I then want this data saved, together with the MainID from the combo box to the IndividualsTbl.
I have set the IndividualsTbl with a (PersonID) field as an auto number each individual therefore has a unique PersonID but may well share the MainID. I'm trying to link many people to the same address.
View 1 Replies
View Related
Feb 9, 2015
I want to use the same form in datasheet mode for data entry and retrieval. When retrieving, all controls are disabled and locked. I am trying to enable and unlock them for modifying but that isn't working.
<code>
DoCmd.OpenForm "PO_Practice Data", , , , acFormEdit, acHidden
Forms![PO_Practice Data]!PO_Name.Enabled = True
Forms![PO_Practice Data]!PO_Name.Locked = False
Forms![PO_Practice Data]!Practice_Name.Enabled = True
Forms![PO_Practice Data]!Practice_Name.Locked = False
[code]...
View 3 Replies
View Related
Dec 18, 2014
I am trying to save specific data from a data entry form to a specific depending on what the user selects from a dropdown/combo box.
So if the user selects "test company from the combo box, that data (from that form) will save to the Test company data table.
View 5 Replies
View Related
Feb 18, 2015
My aim is to have my forms open to a new record, which I have done, but if my users need to then update or edit data in previous entries, they can click a button that allows this.
My thoughts were to add a button, then put in code so that the necessary properties changed the form from displaying a new record or records entered since opening it, to showing all records in the associated table....
As an example there is a table for purchase orders. When clicking on this from the main menu form, it opens up the purchase order form to create a brand new PO. At times though, we will need to revisit an order to attach a copy of an invoice, or update the cost of whatever was purchased.
View 5 Replies
View Related
Sep 28, 2014
My db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
View 7 Replies
View Related
Mar 5, 2008
I have a shared db where there is a requirement for more than 1 user to enter data in the same form and hence the same table. Up till now there has only been 1 data entry clerk so there has not been a problem.
Would accessing the same form by different users cause a problem, assumming they are inputting different records?
View 9 Replies
View Related
Jul 6, 2005
This has most definitely been asked before but I really cant find anything on the forum! Ive created a data entry form which has a save button which the user must click each time to save the record. However how do I refresh the form i.e. empty all data from the previous record without exiting the form. Ive tried to combine the undo macro but that simply deletes the previous record. Any help please!!!
View 3 Replies
View Related
Jul 24, 2013
I've got a table tblPatienten, a table tblRechnung and a form frmRechnung.
The primary key in tblPatienten is KundenNummer, the primary key in tblRechnung is RechnungsNummer. The relationship between tblPatienten and tblRechnung is one to many.
Now, every patient (stored in tblPatienten) is allowed to make multiple orders (stored in tblRechnung).
How can I assign each new order entry in frmRechnung to an existing patient in tblPatienten?
View 10 Replies
View Related
