Copy Data From One Table To Another & Check For Duplicates
Aug 8, 2005
hi, I have 2 Tables: tablea & tableb. The field names in both tables are: user_id, firstname, lastname, from these i have 2 querys (querya & queryb) both of which just look at the fields from the repective tables, & from this i have 1 form (entry form) that pics up the fields from querya. I would like to be able to enter details (records) into the entry form which puts all the data into tablea then automatically copies all the information into tableb, then automatically checks to make sure there are no duplicate records in tableb and finally deletes all the records out of tablea (probably after the form closes). This might sound a bit strange why i want to do this but I hope if its possible it could be used in a larger database.
I think i need to do querys but not sure what I need to do, Any advise would be very helpful.
I have written an extensive Access DB Application for my company and have placed it on a cd for distribution. When we try to copy it from the CD to a folder on another machine the above mentioned error comes up. Any Suggestions. Jeff
I have two tables, Table Products & Table Sold and I'm trying to aggregate the products table to reduce the total number of products and I want this update to happen with all tables that share a 1 to many relationship with the product table. (table sold is one of those).I have products apple, pear, bananna. I am now aggregating them to all just be called fruit. Problem is when I make this change in the product table I get this error:
"The changes you requested to the table were no successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again."how to go about aggregating data in a table that has 1 to many relationships with many other tables. A
I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.
The following formulas will be used in the select statment:
Total Batches = count(BatchNo) for date selected Total Envelopes=sum(Envelopes) for date selected Total Documents=sum(Cases) for date selected Total Pages=sum(Pages) for date selected
Hello everyone, This is code with which I choose records from one table and I put them to another table (OdabranaOprema), can I add code with which I can stop choosing the same record twice? I would like in that case have possibility to change the quantity of the record which is selected twice,
thanks
Private Sub cmdOdaberi_Click()
On Error GoTo Handler
Dim strRedak As String Dim strOdabranaReferenca As String Dim rsPonudjenaOprema As Recordset Dim rsOdabranaOprema As Recordset Dim db As Database Dim intRedak As Integer Dim strSQL As String Dim strSQLOdabir As String
txtNapajanje.SetFocus
Set db = CurrentDb
strSQL = " SELECT Napajanje.Referenca As Referenca, Napajanje.Opis as Opis, Napajanje.Visina " & _ " FROM Napajanje " & _ " WHERE (((Napajanje.PickFlag)= True))"
I have a database called "Main" containing customer details and interactions.
One of the fields is the "Customer Number", whilst I know I can index the field to stop duplicates, is there a way to check for duplicates when entering the customer numbers into the form and display a warning message as opposed to just rejecting the entry? There are occassions I need to create multiple entries but would like to be notified.
I have two tables, tblCandidate and tblNewHire. I am trying to transfer candidates to tblNewHire based on the date they are hired. However, I would like the database to skip any records that are already in tblNewHire, just in case someone inadvertently puts in the wrong date when running the query.
I created an append query (SQL below) but this enters the data regardless of duplication. I need to be able to check both SSN and LastName against the new table and can't set either one to be unique values as it's possible there could be two candidates with the same last name.
Any way to do this by creating a recordset and looping through to check for dupes.
INSERT INTO tblNewHire ( SSN, FirstName, MiddleName, LastName, Phone, Email, EOD, HiringMechanism ) SELECT tblCandidate.SSN, tblCandidate.FirstName, tblCandidate.MiddleName, tblCandidate.LastName, tblCandidate.Phone, tblCandidate.Email, tblCandidateTracking.ActionDate, tblCandidateTracking.HireMechanism FROM tblCandidate INNER JOIN tblCandidateTracking ON tblCandidate.SSN = tblCandidateTracking.SSN WHERE (((tblCandidateTracking.ActionDate)=[forms]![frmNewHireMain]![txtEODDate]) AND ((tblCandidateTracking.LastAction)="EOD"));
I have an MS Access accdb with linked SQL Server 2012 ODBC tables. I am working on a procedure to copy data from local tables to these linked tables (identical schema). I did a simple
Code:
DoCmd.RunSQL "INSERT INTO linkedTable SELECT * FROM localTable"
This works, but is very slow. Way too slow. (INSERT copies the data one record at a time).
I would like to copy the data in a bulk operation, or operations that I can execute programmatically.
Hi: Can any one please help me when user select 2 dates from DDLDate1 10/09/2006 and DDLDate2 10/12/06 and the name and it close the form. I need to create multiple records in the another table on the basis of two dates like that.
Data in continous form table1 ----------------------------- Data entered in continous form 10/09/2006 10/12/2006 John 10/12/2006 10/13/2006 Petty 11/11/2006 11/11/2006 Stiffny
Required data into table table2 10/09/2006 10/09/06 John 10/10/06 10/10/06 John 10/11/06 10/11/06 John 10/12/06 10/12/06 John 10/13/06 10/13/06 John 10/12/2006 10/12/2006 Petty 10/13/2006 10/13/2006 Petty 11/11/2006 11/11/2006 Stiffny
I am currently using a continuous form where there are two drop downs one for AppDate and other for EndDate. I need a script here once use close the form, Script check the data and create multiple records on the basis of date selection into table2. I am using two tables. One for the continous form and the other for the reports (Both have same fields). Continous form table i empty it every time once it close. So i need the result into another table assume form table name is table1 and table where i need multiple records name is table2.
I know there is no more than 4 dups of each record.
what i want from this is a table that will give me a record of how many dups for each record then all the dates that they were added and the date between each record entry.
There are two tabs named Table1 and Table2. In actual there are two tables in Access database named Table1 and Table2. How the data is stored in ACcess tables, I have made two tabs in excel workbook. Now I want Access VBA code that will check if data in Reference field of Table1 matches with any of the data in Reference field of Table2.
If it matches then change the status of the corresponding record of Table2 with either "Withdrawn","Obsolete" or "Updated". SO it depends upon which field out of "WIthdrawn","Obsolete" and "Updated" in Table1 stores "Y". At a time only one of them will have "Y" and rest of two fields will have "N" as shown in the sheets.
As in the example, now Reference "R566" of Table1 matches with Table2 Reference so the status field in Table2 for that record will be "WithDrawn".
I have a form (MemberDetails) and I want it to check if the member I'm adding has already been added, or at least give me a warning that the member might be a duplicate. I have a FName field and LName field that I would like checked (together). I know it's possible because I've seen it done on the Address Book template, but they have it set up to where the First & Last name are saved as one field in another table.
I have a field called Shipdate. I have created a new field that is called invoicedate. What I want to do is copy all of the shipdates and paste them in the invoicedate field for my old records. From here on out they would be distinct fields but for old records and reporting purposes I need those dates.
I have a problem.... How can I copy data from one column in a table to another colunm, with WHERE and UPDATE? And how can I find the data, which is the closest, for example using LIKE '%' UPDATE tag_info,tag_info_kilde SET tag_info.TAG_DESCRIPTION = [tag_info_kilde].[TAG_DESCRIPTION_KILDE] WHERE [tag_info].[TAG_NAME]=[tag_info_kilde].[TAG_NAME_KILDE];
I have a form which is bound to a table. I want some of the Data to go to another table which is not the control source. I am trying this code, but no luck. What am I doing wrong?
My user will open the database & use frm_TEMP. They will see a record using the form. The data will be in tbl_TEMP at first. My user will check all data, make any changes, then I want them to click a button on the form that will move the corrected record from tbl_TEMP to tbl_FINAL. It will then refresh the form and bring up the next record.
In one table (Alpha1) I have a person's general information (e.g., name, SSN, address, phone number, etc.).
I have a person enter his or her SSN and the general information is populated.
I want the person to click on an icon and all the Alpha1 information is transferred to a new table (same field names), then bring up that same record in a new form.
I'll do the work. I simply need the general concept of making this work.
I have a form which im using to store records about companies that I have mailings with. The company name is my unique field as no two companies should have the same name. This form is accessed by several different people and data is input so I dont want duplicates of the company name being produced. Currently, the form wont save a record if it is duplicated but by then I would have filled out the entire form and wasted my time. Is there a way to do the following:
As I enter the company name it would look up exisitng company names. eg if i wanted to enter a new company called 'Dans Plumbing', I would type 'D' and below the text box would display a load of existing records starting with D. after that when I type 'Da' it would only display records starting with Da and so on. All being well, when I have finished typing the company name there should be nothing underneath so that I instantly know its not a duplicate and vice versa.
The possible duplicate doesn't have to be underneath it could auto complete IN the text box a bit like the address bar on a web browser.
how can i make a query to copy records from one table to the other, and leave out one record. the record has corrupted somewhere and is causing havoc on some forms.
I have two tables pertaining to the same database.
Table [Purchase_Order_Details] amongst many fields have Columns - (Purchase Order #) which is the Primary Key and (Work Order #)
My second table [Order Details] also has a column (Work Order #) . Now I have added another column to this table i.e. (PurchaseOrderNo) - this column is blank as of now.
However I would like to run a query to fill the (PurchaseOrderNo) column depending upon the (Work Order #) which is present both the tables.
I want to insert data into a table where a symbol does not already exist for that date. I am not sure what i am doing anymore :( So please help me verify that this won't insert duplicates? Am i using the correct logic? :confused:
"INSERT INTO StocksData (Symbol, [Security Name], [Market Category], " & _ "[Reg SHO Threshold Flag], FileDate) " & _ "SELECT DISTINCT Symbol, [Security Name], [Market Category], " & _ "[Reg SHO Threshold Flag], '" & fileDate & "'" & _ "FROM " & sTableName & _ " WHERE ((Symbol Not In (select Symbol from StocksData)) AND (" & _ fileDate & " Not In (select FileDate from StocksData)));"
I have a form with 2 subforms, each based on their own table. One displays categories of invoices (e.g. rent, electricity, etc.) including some details like monthly costs.
I would like users to be able to select one of those categories and copy this to another table, after which they can enter on what date the invoice was paid, to make a history of payments.
At first I based fields in the history table on fields in the categories table so that you could simply pick a category from a combobox. I had an after update event on that combobox that also automatically set the 'costs' combobox to the matching price.
Worked fine, but had one snag: if I update the costs of a category in the categories table (e.g. the rent goes up) then all the costs in the history table was also updated because the fields got their info from that table.
So now I no longer have field from the history table based on the other table, and want to use 'set value' to copy values from one table to the other. I'd like the user to be able to somehow select a category with a single click on a button, and getting the info for that category copied. However, how can I get access to know from which record I want the fields copied?
Or is there a completely different way to get a history of payments that works much better?
I use the query below to pivot the data into the right format for export:
Code: TRANSFORM First(Amount) SELECT SrcUD2 FROM source WHERE LocName="myLoc" AND Entity="LE01" AND PeriodName="QA - 2014" AND ScenarioName="Actual" AND (Account="col1" Or Account="col2" Or Account="col3" Or Account="col4" Or Account="col5" Or Account="col6" Or Account="col7") AND (SrcUD2="row1" Or SrcUD2="row2" Or SrcUD2="row3" Or SrcUD2="row4" Or SrcUD2="row5" Or SrcUD2="row6" Or SrcUD2="row7" Or SrcUD2="row8" Or SrcUD2="row9") GROUP BY SrcUD2 PIVOT Account
which yields the following table as the query result:
which is great except that I want to transfer the results to Excel using the CopyFormRecordset method without the metadata of column 1 (row1, row2 etc.
