i have about 1500 records in my database and i want to display a bar chart for each record, i can tryed creating one but when i try adding the months it says i only can add 6 fields but i want to include each month not just 6 months in the chart, this is an on going database so in the future there will be more months added. here is the picture of the form i want to be able to show 2005 and 2006 figues in the same chart
I'm trying to create a chart in a form, this is not a problem, however, the chart types available are a bit limited compared to if i inserted a Microsoft Excel Chart object.
I'd do that except I'm trying to create a chart based on a query.
Is there a way to make the chart wizard use the Microsoft Excel Chart object as its chart creator so I have access to the chart types available in that object?
:) Hello, Can anyone please tell me how to create a graphic (a chart like in excel) based on the result of a query? It's just names and values (2 fileds only) Thankyou.
I am trying to create the Excel chart see attachments (ExcelChart.jpg) in MS Access but I don't think it's possible with the Access Wizard because it doesn't allow me to use more than one data field (step 2 in the Chart Wizard)
I created the Excel Chart using a pivot table in Excel with two data fields and they are graphed simultaneously
For the Access Chart I only managed to get the "Total Delay Series" and not the "Arrival Delay Series."
Must I use Excel to make this complex chart and link it to my Access form and if so can the chart still be dynamic? My intention is to set parameters using combo boxes and then create the chart on the fly. For example currently the user sees the series for the years 2004- 2008. I want to enable the user to be to have a choice about what years (range) they want to view.
I am in Access 2003 and I need to create a chart of the inventory levels of a product. I have the daily production and I know that the amount distributed out of the warehouse will be the amount produced that day up to 200 items. However, I can't figure out how to keep a running balance of 'ending inventory' if the amount is over 200, so that it would be the next day's beginning inventory.
I am trying to figure this based on the formula:
beginning inventory + new production - distribution = ending inventory day 1 day 1 ending inventory (beginning inventory) + new production - distribution = ending inventory day 2
etc
I wrote a query to put the new production and the daily balance to retain in inventory (the lesser of daily production or 200). I need my query to be run so that I can put it into a chart, so I need a column to be 'ending inventory' by day so that I can have a line chart going across time.
When I use the Chart Wizard to create a chart it looks fine in the preview but when i change it to form design - to alter the fonts etc- it gives me a graph which looks as if it comes from the Northwest database. What on earth is going on???
PS Am i best using graphs in reports or Pivot charts
I am trying to create a chart in Access but havent done it before.
1). I have the following data:
Code CountOfType Month
Q 3 3/1/2012
K 1 2/1/2012
CDSA 1 2/1/2012
[code]....
2). I dont to create a chart where I am showing the transaction count (countoftype) in the Y axis and the code and bill_date in the Y. I want the chart to show the transaction by code and show what month it occurred. Would this be a crosstab query?
I need to display the out put of a table as chart in ms access 2007. My table is as below.
ItemID Week 1 Value Week 2 Value
1001 87 5
1002 80 1
1003 42 1
1004 55 164
In the chart X co ordinate should be the "ItemID" and the Y co ordinate should be the week number (eg, week1, week2 ...etc). Is it possible to display the chart with the above table? Or do I need to transform the table and then dosplay as chart? Also can I transform the above table as shown below using a single Transform query ?
I try to develop an access 2010 Forms that contains 1 or 2 charts. So my problem is, in my form I have 1 combobox and 5 unbound textbox. Inside Event OnChange combobox, there is function DCount that will setup value to the 5 unbound textbox. Until this point, the 5 unbound textbox is have its value.
Now I would like to create a chart that value are based on the 5 unbound text. How can i accomplish this ? i see in many articles, a chart row source is link to a cross tab query.
I was just wondering if I could use a query and table to create pivot chart? and If so how I could do this? I need information from both in order to create the chart I want.
I have a a table 'Orders' with fields (Order Number, Order Date, CD Number, Card Number).
I would like to produce a query in access 2010 that would allow me to count how many times the CD Number 'Diab190617' has been purchased.
I would like to store the results of this count and counts on other cds numbers somewhere so that I can produce a graph/chart of these counts. How can I do this?
I have a form with a chart , 2 textboxes for start date and end date and a button to filter the data( filter the data by date range) How do i continue from that? The chart isnt updating.
I am trying to create a form to enter data in a table. I would like to make it pull in info from a switchboard. If the record already exists I would like it to find it and allow me to edit the info. If the record doesn't exist I would like to be able to add a new record with the data input. What is the best way to accomplish this?
I am using a one column chart on a form (unbound object) which references a query that sums a field in my table that tracks monetary amounts. As I enter records and go to the next record the chart does not update. It only updates when I close and then open the form. Has anyone had experience using this type of chart on a form and had it update after each record was entered?
I have a small application for booking cars into a Garage.
Tbl_Bookings: Date in: 6.8.2013 Brief: Full Service Approx. time: 4 hrs
Next car : 6.8.2013 Brief : Brake pads Approx. time: 2 hrs.
Workshop capacity on any day -16 hrs.
Now my customer would like to look at a pie Chart, per date, showing 16 hrs green and 6 hrs red, so that if he can see at a glance if he still has capacity for more cars on any certain day. I can insert a Chart, but not sure how to make it do what I want.
I'm having problems relating a pivotchart with search criteria automatically after the search - all on the same form. This will be a nifty trick if it is possible, and I can imagine other uses for a form like this.
Without being overly wordy, I attach a mdb in hopes that someone with a bit more skill than I will take an interest and set me on the right track.
I'm a bit stuck on creating a chart in Access 2010. Not sure if I've set my table up right or not
Here's my table design
And the input form
My data is laid out like so
When I insert a chart though, I'm lost. It's like it's totally ignoring my data. The data isn't mine, it says east, north and west like a 'default preview chart'. The row source is
Code: SELECT [student_id],Count(*) AS [Count] FROM [tblProgressLevels] GROUP BY [student_id];
Which means nothing to me I've managed to get most of the other stuff figured out, but these charts are confusing me.
Output??
What I want it to do is show how the student is progressing but I've got it all back to front I think. How could I lay my data out so I have a single English column, a single maths and a single science and they still go up in terms like my form shows; they're all in the same table at the moment laid out the same way as I set up the English tracking.
I also just realised I'm trying to chart alphanumeric values stupid boy... Can Access do a conversion where I make a lookup table so that 1c = 1, 1b = 2, 1a = 3, 2c = 4, 2b = 5 etc. or would a query work?
lets say i have a data field which contains hyperlink for a html file, can i display the content of the file from the hyperlink in the form when the form is loaded?
I have a chart in a form which gets its data from a cross-tab query. The chart was working fine and still is besides the fact the it is skipping the first row of data, or reading/treating it as a header. I had this problem before and the only way i could get around it was to re-create the charts. As there are many charts i want to avoid doing this again and find out why this is happening to prevent it happening again.
I have a bar pivot chart made in a form this load fine, I have the below VBA code in place to control the bar color depending on what the bar show.
Set frms = Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0) Dim i As Long With frms For i = 0 To Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0).SeriesCollection.Count - 1 With .SeriesCollection(i).Name Select Case Forms![OtherCases created by Indv by Month
[code].....
When I then open the Report this is not working at all each bar just get a random color regardless what the bar show.how to convert the above to fit a Pivot chart form a form that is displayed on a report.
I made a form pivot chart. When I open it by going to forms and opening, it opens in the pivot chart view. However, I created a button on a switchboard form for easy access to this pivot chart form and when it opens from the button it is in form view and not pivot chart view. How can I get it to open in pivot chart view from this button so that the users don't have to keep switching it to pivot chart view manually?
I have just tried experimenting with placing a Chart control within a form (Access 2010). Although the chart ultimately seems to work (based on my one simple example), I'm getting an Error 1907 (Could not register font.......) each time I launch the database or reload or edit the form.
This error message is itself contained within a "Configuration Progress" screen for MS Office Prof + 2010 which seems to complete if I select Ignore the error message but runs again each time the database is launched (with the same error message showing up part way through). I am logged on as Administrator.
I am trying to create a user form with sub form using the form wizard. I have only 2 tables, Employee (main table) and Vacation (subform table). I pick the fields from Employee Table then fields fro Vacation, but the wizard treat the Vacation as main form and Employee as sub form.