I have a table that I want to append to another table, but I do not want to duplicate records if the check number is already in the table I am appending to. I have tried
<>[deposit].[check_number]
or
not like [deposit].[check_number]
or
not [deposit].[check_number]
but I always get prompted to enter a check number... therefore the criteria statement not working.
do not know what I am doing wrong.
Hi, In the example attached below how can I see the "cut off date" that I am prompt to enter in the fourth field of query1-a (I would like to see it for each one of the record that are displayed when the query is run and then append it to a table)
Cheers,
Hi
I have an append query which runs from a command button. It transfers all the fields I want it to but when I run the query when in one particular record it not only appends the field for the current record but appends the fields for every other record in my table. I know I should be running the query using stLinkCriteria but I'm not sure on the syntax for the code, see below:
stDocName = "qryAppendOtherAdults"
stLinkCriteria = "[ApplicationNum]=" & "'" & Me![ApplicationNumber] & "'"
DoCmd.OpenQuery stDocName, acNormal, acEdit
Me.frmOtherMember.Requery
Can someone help me with this one please?
I would like to run an append query but only after I have checked a table for existing data. I want to see if a ralicarID exists in a table and if it doesnt the query should run. if the railcarid does exist but also has a check in and check out date then the query can also run.
I was thinking something like this
Dim RailcarInDatabase as number
' run query here that checks for the railcar id and returns a value
if railcarID in table then RailcarInDatabase =1 else RailcarInDatabase =0
And if If RailcarID in table and DateInShop is not null and DateOutShop is not null then RailcarInShop = 0
Something like that which will allow me to run the query only if the car is not in the database or it is currently not in the shop.
Hello Everybody,
I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID
I use the following code as normal
Private Sub Command19_Click()
On Error GoTo Err_Command19_Click
Dim stDocName As String
stDocName = "apNewPres"
DoCmd.OpenQuery stDocName, acNormal, acEdit
Exit_Command19_Click:
Exit Sub
Err_Command19_Click:
MsgBox Err.Description
Resume Exit_Command19_Click
End Sub
Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.
Thanks for any help
This is a very simple problem most likely for the masses, but I am new to access. I have employees who enter will enter information about specific tests on electronics components into separate tables by a form. I know my method is poor, but this is how it works. I got assigned this database at my internship this summer because they ran out of thigns for me to do.....I've never even used access before, so as long as it works, they're happy. I have a form which which writes to a first table with 20 fields. I then have separate update queries which take the data in the first table and put it in all the other tables. Trust me, i know this is pretty much the opposite of the whole point of a relational database, but I am and was limited by time, for the size of the database they want, there was no time to learn about normalization etc etc. Sorry this is wordy, but THE QUESTION is......if they run multiple tests wtih the same information for some of the fields I have fields named "Run#, Unit#, Date" etc, even if there is records wtih the same information, hwo do i get it all to show. Right now, it seems to be rewriting over the same records. If they run 3 tests on unit 10 on August 1st, how do i get it so all those show up. I think its somethign wtih in the table, for the primary keys, changing the Index: No, Yes(Duplicates) Yes(No Duplicates) but I could be way off. Thanks, if the question doesnt make sense i'll try to rephrase it, I apologize I'm running on about 45 min of sleep:confused:
View 3 Replies View Related I have an append query and want only the last row (Unique ID) to be added rather than the whole table. Is it do-able? Here is the SQL...
INSERT INTO TblCoursesRebooked ( StaffCourseID, Course, [Date], Staff, [Renewal Date] )
SELECT TblStaffCourse.StaffCourseID, TblStaffCourse.Course, TblStaffCourse.Date, TblStaffCourse.Staff, IIf(IsNull([Renewal in Years]),Null,DateAdd("yyyy",[Renewal in Years],[Date])) AS [Renewal Date]
FROM TblStaffCourse INNER JOIN (QryCourses INNER JOIN TblCourse ON QryCourses.CourseID = TblCourse.CourseID) ON TblStaffCourse.Course = QryCourses.[Course & Level]
GROUP BY TblStaffCourse.StaffCourseID, TblStaffCourse.Course, TblStaffCourse.Date, TblStaffCourse.Staff, IIf(IsNull([Renewal in Years]),Null,DateAdd("yyyy",[Renewal in Years],[Date]))
ORDER BY TblStaffCourse.StaffCourseID DESC;
Just wondering if someone can point me in the right direction so that i can solve my problem?
Basically what i have is a select query that carries out some calculations based on data entered. These calculations are expressions as i am sure you guys know. what i want to do is put the value from the expression/calculation into my table in the correct fields made for these values. However i have tried everything i can think of to get this data into the tables fields but to no avail.
example. Expr1: [field1]*[field2] the answer created by [Expr1] is the value i want to be placed in [field3]
Can anyone help me on how i can do this
I got these two append and delete queries in my database that i want to run on startup. I was wondering if there is a way to not have the msg that pops up to ask if you are sure you want to append/delete 0 record to table if there isn't any record that matches the condition set. I'm sure there is a way because if there isn't any record that matches the condition set in the queries then i don't want to have to click "No" everytime the database starts.
thanks,
Vincent
Hi,
I have a macro that runs a 'make table' query followed by a series of 'append queries' each time the macro is called. I require the data from each append query to be pasted below the existing data already created by the original make table query and the append queries that have already run. The issue that I am having is that the data in fact appears to be appended in an unpredictable way (ie sometimes I run the macro and find that data from the append queries is below the data from the make table query, at other times I run the macro and find that data from the append queries appears above the data from the make table query. Unfortunately, this causes problems with downstream queries, which rely upon finding the last row of data subject to various filters. Can anyone help me understand how Access determines the sorting/positioning of new data appended to an existing table, and therefore resolve this issue?
Thanks in advance,
jc
I've done some searching, and haven't found any threads that match what I am attempting...
I have a database that tracks expenses that are incurred under different ongoing projects. I currently have a report based on a query that asks the user for the project number, and shows all the expense invoices that have not been paid for that project. This report is basically an internal invoice that gets assigned to a department, and so it is assigned an internal "invoice" number. Currently, the user types in this internal number before the report is generated and it is displayed on the report for printing purposes.
Here's the tricky part (for me anyways): I would like to be able to filter the invoice records by project number, and then append the user-entered internal invoice number to the applicable records. There is already a field in the table for this data, and it is currently being entered on individual records after the report is printed. My goal is to be able to do this all in one step.
Any help will be greatly appreciated... Thanks guys!
I am having fun with key violations and cant seem to find out why?
I basically am deleting a Job but when i delete it i want to archive it hence the 'Archive' query and the History Tables.
It seems to be pasting everything in fine apart from the 'EmpJobHistory' Table?
I am getting the usual message "Key violations"?
I think i need the intermediate 'EmpJobHistory' Table because there will be Employees that are related to many Jobs and vice versa.
I am trying to copy notes from one table to another table where a condition has to be met and I can't figure out how to do that in an APPEND query.
Each record has a unique number that comes into my Initial Table in my Access database from a construction program I download. In this particular table both the [DNJTNo] and [DNVersionNmbr] fields can have duplicate numbers. However, when I run the query I want it to add a record to the second table only after the query checks that the [DNJTNo] in combination with the [DNVersionNmbr], is not already in the table. If it is, I do NOT want it appended to the second table. (I have attached a picture of the query in APPEND design stage).
I have a table called dbo.userinfo with a primary key called employeeid and a field named jobfunction.
i have an intermediate table named dbo.projectpositions with a primary key named projnumber and a foreign key named employeeid.
I have a 3rd table named projects with a primary key projnumber and a field called project manager.
I'm trying to append the Projects table so that any projects that a worker has worked on (dbo.projectpositions) that is listed as a project manager (jobfunction) will have their employeeid fill in the project manager field on the projects table. Looks something like this:
INSERT INTO Projects ( [Project Manager] )
SELECT dbo_UserInfo.JobFunction
FROM (dbo_UserInfo INNER JOIN dbo_ProjectPositions ON dbo_UserInfo.EmployeeID = dbo_ProjectPositions.EmployeeID) INNER JOIN Projects ON dbo_ProjectPositions.ProjNumber = Projects.ProjNumber
WHERE (((dbo_UserInfo.JobFunction)="Project Manager"));
But just can't figure out the next step to populate the project manager field...
How can I modify the below code so that it only adds new records to AttributesTBL from ProductInformation-Consumer?
INSERT INTO AttributesTBL ( Material )
SELECT [ProductInformation-Consumer].Material
FROM AttributesTBL INNER JOIN [ProductInformation-Consumer] ON AttributesTBL.Material = [ProductInformation-Consumer].Material;
I have a table with 3 fields:
numberFROM, numberTO, Quantity
e.g.:
10, 15, 6
I would execute an append query that will store in another table:
10
11
12
13
14
15
How could I mange it?
I basically want to use a set list (TableAddresses). This would be a Append Like "*InsertAddress*" I do this manually by simply typing 20 different addresses and then clicking Append.
Is there a better way to do this simply?
I am having problems adding details from StudentForm to student table. When I click on the add student button it throws back an error Microsoft Access cant append all the records in the append query.I have attached the error as a pdf and the database for info.
View 2 Replies View RelatedI have a form(frmNewTest) that generates a fitness test id when you enter the month and year (you do not need to enter anything in the Fitness test id field which is greyed out).
This data on the form should then append to the tblFitnessTest. However, when I select the button to add test it returns a message 0 rows to append.I have attached the database and the form in question (frmNewTest). There are two append queries attached to the button on the form and neither work correctly. I have tried almost everything but can't get it to work.
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code:
TRANSFORM
IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT
SELECT
PT_LEVEL.INF_YEAR,
PT_LEVEL.INF_MONTH,
PT_LEVEL.UNIT
[code]...
I am accessing an oracle database that has several thousand records in it. I am quering for specific requirements, but would like to save my query results in a local access database for faster searching capabilities. Is there a way for me to set up a query that will go out to my oracle table files, select the records that pertain to my search criteria, and add records to locally stored tables without duplicating itself each time that I run the query? I would appreciate any assistance in this matter. Thanks for your help!
View 1 Replies View RelatedI am using a DB to, among other things, calculate the monthly salary of my service users. Obviously, I have to do it every moth. Most of the data from the previous month will be the same in the next month, except date. Even if some of it is different, having the previous data on sight calculate the new salaries.
Every month I have to select all records with the month date (say 07/2015) I want to copy and
(1) copy paste the records into the salaries table, and
(2) search and replace the new records' dates.
For example, records with 07/2015 with say 08/2015 (I have to replace downwards to ensure I don't change the record of the month I need to keep).
It can't be that difficult, but I have tried append and update queries to make this automatically (say by clicking a button) but so far no luck.
I have a list of dates in my Form1.
When I click on a date it opens Form2 to show that dates specific details.
I would like a macro on Form2 that appends the filtered results to another table.
I think I am just struggling with the references to Form2 in the append query criteria.
I would like to use an append query that appends data from a union query into a table, but doesn't add duplicates based on a certain field.
I have been trying to use this code, but it doesnt seem to work.
INSERT INTO [Cotton13/14]
SELECT DISTINCT [Contracted Farmers].*
FROM [Contracted Farmers]
WHERE NOT (SELECT * FROM [Cotton13/14] FROM [Cotton13/14] AS [Cotton13/14] WHERE [Cotton13/14].[OF Codec] = [Contracted Farmers].[OF Codec])
Cotton13/14 is the table I want to append to and Contracted Farmers is the union query. However the code is giving me an error.
I am looking to make an invoicing database.
I create 30 invoices a month. each client gets billed the same amount each month (for example Customer A gets billed $100 every month, Customer B gets charged $200 each month). Only two things get changed on the invoice-'Description' (for example the description would be 'services rendered for July 2014' for July invoice) and 'Invoice Date'.
Now please see the image attached, I have an append query that combines information and creates invoices for all 30 clients.
The problem is, the 'Invoice No' field in the invoice table stays empty, because I do not know how to start numbering at a specific point (for example invoice numbering should start at 14150001) and I want it to add the number (+1) automatically when this append query adds data to the invoice table.
I have two append queries that I use to archive certain data from two different tables to one archive table. The queries are run from the corresponding forms of the two tables. I would like to be able to add the form name to the append query.
That is, if the old data is coming from FrmA, then the Archive table would show that the old data came from FrmA or TblA, etc. I added a field in the Archive table [FormName]. I know you can call the name of the form by =frm.name, but how do I append this to the Archive table without having to have the Archive form open?