Currency Convert From Digits To Number
Nov 7, 2007dear frnd,
i have a access program for printing cheque. i want to use a text box which automaticaly convert number ito digits from user input text box.
dear frnd,
i have a access program for printing cheque. i want to use a text box which automaticaly convert number ito digits from user input text box.
Is it possible to convert a number (whether in the "Standard" or "Currency" format) into words ?
View 5 Replies View RelatedHi All.
In my calculation in a query:
Cost: Sum([Cost]/12*(DateDiff("m",[StartDate],Now())))
Cost is Currency;
StartDate is Date.
The result look like Numeric format I would like to have Currency format. Is it possible?
Thanks.
Hi.
I really need to convert fields with currency data into text values AND still keep the decimal point and the numbers after it.
But how?
Russ
I am sure it must be very simple but I can't find the command!
I need to convert a currency value to a text value for use in a combined string, say £123.00, to the text string "£123.00".
Basically I want one of the reports to say "£123.00 each less x% discount".
Currently I am using :
[Door Price] & " each less " & [Discount] & "% discount"
which will display "123 each less x% discount"
I could add the £ sign in code but if I add the .00 as well I will then have problems with a price of say £123.50!
Surely there must be a simple command that does this for me?
Cheers!
John
I have a field that adds up hours and minutes from a number of fields control source set to:
=HoursAndMinutes(([PaidHours]+[HolidayHours]+[OverTime])*[Pay]/100)
Where the Pay field contains the rate of pay in pence.
This then displays the value in the following format 15:00 what I would like to do is have this value displayed as Currency it makes no difference if I set the format to Currency is there a was to have it displayed as currency ie,
£15.00 any help would be appreciated.
have a query with a field that contains numbers with 3,4,and 5 digits. I want to format it so it displays all as 5 digits by adding 0s to the front of the number. EX:
324
4856
45634
change to:
00324
-4856
45634
Help please. Dont want to do it in VBA either. I would rather build it as an expression field or something.
I need a field to permit only numbers. Upon selecting number for the data type I select Long Integer for a longer number... But it only allows 9 digits.. I need it to allow to enter in longer numbers... Any help?
Thank you very much in avdance
I'm just to work with Fox Pro, and I am therefore puzzled with how to define the exact number of digits in a field in a table in Access. If I need 9 digits + 2 decimals in a number filed, how do I define that in design view?
Also, I need to know how to export a table into a text file, with a format without any spaces, and each record is divided with a new line. This an old IBM text format file.
Thanks, Torsan
Hi there
Im working on an update query to add 2 zeros to the front of a field where it is less than 8 digits long. I'm not sure how to go about this, can anyone help me out?
Cheers
Hi guys,
I have a text box, which requires a 8-digit number entry. I have wrote the code to check that the length is 8 and if it isn't a label will turn visible next to the field telling the user entry must be 8 digits.
This works for when i enter a number less than 8-digits but when i input a number with more digits as it does not fit into the text box it turns it to a scientific format value and when the code runs it shows the length is actually 8! And therefore the entry is valid!
I.e. when i input 123456789 the text box shows 1.23E+08 which is 8 charecters!
I dont want any error messages to pop up as i handle them by code and use labels to show the error message next to the problem field and i would like to keep this consistent. Is there any way i can do this by a function or a property in the table or form?
I appreciate any help/advice
cheers
hello,
simple problem. how would i grab just the last six digits of a social security number?
example: 123-45-6789 to 456789
I'm guessing that I should use the Format function, but I'm not quite sure how to write it. Thanks!
G
I have a report to print that only shows the last 4 digits of the Social Security field. How can I do so for the entire list of social security #'s.
Thanks in advance.:cool:
I want to know if there's a way to sort alphanumeric fields where the number of digits aren't always the same.
Example: I have the following: 2a, 10a, 3a.
Currently, it sorts: 10a, 2a, 3a.
Is there a way to get it to sort 2a, 3a, 10a without adding a 0 before 2a and 3a?
I have a form with an unbound textbox. I want to be able to enter a sequence of digits and spaces (e.g., 02 950 4187); however, when I paste this into the box, I always have to delete the two spaces until the number is 9 digits long. Then it will accept the number and go look for the prize. How do I get the textbox to accept the number I paste in?
View 5 Replies View RelatedThe field SECL DDI has the users phone number unfortunately over time these have been entered in different formats so there are 5 digits, 6 digits, 7 digits etc...Can I run a query that counts the number of digits in each filed and then tell me how many of each exist
Ie
4 digits 3412
5 digits 5000
I'm trying to compare a Currency formatted field to a Number formatted one and getting wrong results.other then formatting the Number as Currency too ? Tried to use Val() but the Currency returned 0
View 7 Replies View RelatedThis has to be a simple way to convert a positive number to a negative number. For example, convert 5 to -5. The field is quanitity and I wanted to convert to negative number. I tried to use negative = "-" & [quantity] but it doesn't work.
View 2 Replies View Relatedhow to change default currency in Access 2013 to a "foreign currency" (i.e. to Indonesia Rupiahs) without changing control panel (Region/Language>currency) - now setup as USA ($US)?
View 3 Replies View Relatedi have data stored in my paid field as negative ex: 000000460p which is $40.00. how can i convert this into $40.00?
I know i have to make a query but how can i make access pick up all the negatives that end in P and transform them into a negativ e number?
thanks
I have a field on my Report called Revenue. It is used in a calculation and there is a calculated field called Profit. Revenue-Cost=Profit. That all works.
The only thing that is wrong is that the Revenue field displays its numbers like this:
0.7
12.43
4.3
0
etc.
i.e. not formatted for currency. But I don't get the currency option under Format. It is based on a Query and this Query is based on a Linked Table.
Any suggestions on how to get it formatted as currency while still having the calculated field working?
Hello Everybody...
I have a Question.
How do I convert a number (26) to 26:00 Hours.
The thing is.
I have a database that calculates the hours of overtime.
for example.
I work from 7:00 to 19:00.
Then I get 12:00 hours of total time.
The above is no problem.
But no I want to deduct the number 2 from 12:00 hours.
I hope to hear from u guys soon
I would like to convert a date field to a number in a query. What I am trying to do is take 2 date fields and see how many days they are apart. For example if one date is 3/1/07 and the other is 3/1/06 I would like 365 days to be returned. Thanks for any help!
View 2 Replies View RelatedI am importing data from a text file that contains dates in this format: 08012007
I am trying to convert the number to a date 08/1/2007 so that I can run date related queries.
I have a table with the following fields:
Tool Text
Tool_ID Text
Description Text
The Tool_ID field holds a number if the tool provides a tool id. However, if the tool doesn't provide a tool id, the text "No tool ID given" is automatically placed into the field. Therefore, it needs to remain a text field for this reason and others that are too long to go into.
Anyway, I created a query that pulls only one specific tool which always provides a tool ID. Therefore, the results of my query will always have a number in the text field "Tool_ID".
Question: Is there a way to convert the text field to a number field within the query?
Thanks in advance!
~ Greg
I have a number, 20080101, that I need to convert to 01/01/2008.
How do I do this? I am not familiar enough with access to know.
Thanks.