Hi all, my database is based in Budapest, i am in the UK, whilst i was in the database, i lost connection to the server briefly, then an error message came up saying the database was closed wrond and it needs to be repaired. I have tried this, but it says it can't begin to repair it as i am still in it, i am not though and have tried restarting my computer, but still the same, can any one help? thanks
View RepliesCan anyone help i was in a database and my computer crashed now when i try to load the database it says it needs to be repaired so i click yes to repair it and it comes up Could not find Description how can i fix this
View 2 Replies View RelatedHi guys,
I am totally stuck with Access crashing every now and then. Actually when I try to set source for a sub form object. Pressing the combo box crashes Microsoft Access 2003. I have tried repairing and compacting etc but to no avail. I have treid deleting and rebuilding form but it did not help. If anyone came across this problem please Help ...
Thanks very much...
I'm having a problem with a UNION / UNION ALL query.It seems there is a application crash fault when running the query that MS are aware of and have issued a hot fix. Unfortunately it will take my IT dept some time to check and install the hot fix If they agree to do it at all.
Problem signature:
Problem Event Name: APPCRASH
Application Name: MSACCESS.EXE
Application Version: 12.0.6606.1000
[code]...
I'm trying to set up a simple query that links four tables. However, the tables are extremely large, all in excess of 1.5GB each so I had to split the tables up into four separate DBs. I've tried the following with no success:
1) Link the 4 tables in the DB which contains my primary key. This quickly inflates increases the file size above 2GB and won't let me go any further.
2) Build a remote query to connect the four tables. This looked promising until I tried to run the query and it became evident that it only knows to point to the last database source that you specified.
I'm running everything locally on my C drive. The data source are simple text files (1.6 million rows) from the FDA website.
Hello All...
Well, I am facing one problem..in my application; I need to show all forms / reports name of other database( .mdb ) file without opening the other database physically. I tried a lot but didnt succeded. I tried with below code..
Set AcApl = New Access.Application
Call AcApl.OpenCurrentDatabase(strfolder, True)
Set AcProj = AcApl.CurrentProject
Set frm1 = AcProj.AllForms
intCount = frm1.Count
But here wen the second line AcApl.opencurrentdatabase get executed at that time the database get open physically, and i dont want that..So is there any other way around..If so..please please help me..
Thanks in advance..!!
i have a database that runs updates from within itself.what i need is, this database to then open a another database run a update query, then close it.
View 4 Replies View RelatedDatabase: Access 2007
I have designed a touchscreen input system using Visual Basic.net and this writes to an Access Database. Each Touchscreen has its database locally so it can still work even if there are Network problems.
Now what I would like to do is have all these local databases write to a central database say every minute but only write new records to the central database. The Central Database can either be Access or SQL.
What is the best way to do this?
I have been working on a database for over a month now, and my boss just threw a monkey wrench in my work. I believed that the Metal Market Prices would be entered once a week in the current DB. My boss informs me today that he wants an employee to go in every morning and enter that days Price for Each Metal with respect to many different markets.
There is a total of 12 metals, and 5 markets. I need the data to be stored first by date, then by either market or metal, and lastly by which ever isn't used second (Either: date-market-metal, or date-metal-market). I think the Latter of the two methods makes the most sense. Is it possible for my current DB to lookup values from the Metals Database based on date-metal-market?
I have a problem that seems to be happening on several users' databases and is causing a big problem. None of the databases is a shared database...they are all single-user databases on stand-alone computers. I have tried looking for help within previous posts, but all seem to be related to shared databases.
I am getting an error message: "The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time." The database cannot be opened, imported, repaired...nothing seems to work.
Again...these are NOT shared databases. I appreciate any help I can get. I created the database for all of the secretaries in our school district to keep up with absence data. It involves many tables, queries, forms and reports, and has generally worked well. However I am now seeing several that are getting similar errors as mentioned.
Thanks!
I'm new to Access and VBA, for the record. What I need to do is copy a SQL database (table structures and records) and save it as a local Access database, so that the user can query and make any changes on the local file without editting the SQL database.
Looking around, it seems like the best option would be to use the TransferDatabase method with the acImport option. Does this sound reasonable, or can someone with more experience suggest a better way to go about it? Thanks.
I am testing the security of my DB X on Acccess 2007. I could create a new database Y and linked to the database X. Unfortunately i could change the records on the tables. I don't want other DB that make connections to my DB to change my tables!
View 1 Replies View RelatedIs it possible to access a table in one Database (Database A) from a separate Database (Database B) and if so how. I should clarify that this is an Access Database.
View 2 Replies View RelatedI created a database with forms, querys, etc. Now I was thinking of creating a exe so everyone can use this database without having access to all the design functions.
the only problem I see about doing this is if we need to use the same database for different project, we need to always create a new exe for each project.
Is there a way to make a empty database exe with just the layout, querys etc but with no data on the tables and have a save, open and save as option. So we can have several projects using the same database?
I was thinking to create a VB code for the database to delete all data on the tables when the database is open.
and before closing the database exporting all the data to a txt file or something.
Then the next time someone opens the database goes to the main form which has a open bottom which imports the txt file into the tables.
This way we can have several txt file for several project and use always the same exe database.
I am working on a database that will be an addition to an existing one on the company server. However, to make the overall layout not so complex and allow room for other additions in the future, I'd like to keep the databases separate. This will also ensure more efficiency, integrity and troubleshooting overall.
Does anyone know how this is done?
Thank you in advance for your help,
~Kilch :eek:
The menu for make a MDE file is blanked out or grey’d out. The database is partly made using access 2000 then xp
Jabez
I have a series of unrelated access databases and I would like to have one 'super menu' where i can click a button to go to different databases.
View 3 Replies View RelatedI have a car dealership database and have a servicing section.
I want to create a form to service these vehicles.
The only vehicles which will be displayed on the from are the sold ones (because you cannot service a vehcile which hasnt been sold) which i have a query for.
I also want the form to display the customer who owns the car the service details (eg what they need), the parts availiable and the parts required for the service.
The calculations i need to make in this form are as follows
quantity needed (parts required table) - quantity in stock (purchasing customer parts table)
quantity needed (parts required table) * price (Parts Table) + labour (servicing table) = part/labour costs (servicing table)
http://pic18.picturetrail.com/VOL885/3178839/6480291/97832270.jpg
any suggestions on how to do this would be fantastic
i havent been able to figure out how to get my subform to work properly....
i've posted in the forms section (http://www.access-programmers.co.uk/forums/showthread.php?t=99624 )
it is really important that i figure this out so that i can keep my job..
how else can i obtain help? even if i have to pay for it?
what do you guys suggest?
Hi all,
I was playing with passwords for one of my access db.
I tried opening the db with the password, but it won't work. So, I thought I forgot the password. I checked some posts on this forum that helped in retrieving the password and it's the same that I have been trying. I am not sure if the Name is correct, is there a way to retrieve the log on name?
I also noticed that when I try opening any other db on my system, it asks me to log on, I though I was only applying a password to one file.
Please help
Thanks!
Hello Here is my question I have a datbase with 4 tables
I have one of the table related to the other 3 by agent name.
I Have a page with the agents and all thier info. NO problem
I want to create a link from each agent to thier listings..
Do I need to have a seprate page for each agent or can one page
create the info I need with that agent..??
I have been tasked with setting up a database for all employees the info contained is along the following lines:
Employee Number:
Name:
Qualification Status:
Qualification Run Out Date:
To name but a few of the parameters
I have currently set up the start up screen, main switch board and the complete employee records table with form (for simple viewing/input).
My problem is this we have four departments that require access to the database
Admin - Require access to all employee records (View)
1 Dept - Require access to their employees (View and update records)
2 Dept - Require access to their employees (View and update records)
3 Dept - Require access to their employees (View and update records)
Currently i have created one complete employee record table (Admin) how do i break this down for each department so that when the info within each one is updated it in turn updates the main Admin table?
I started by copying and renaming the Admin table for each department but this never updated.
Any help and info would be appreciated.
On a slightly less important note for the time being at least can i password protect each command button on the main switchboard?
Hello,
I basically started teaching myself how to use Access 2000 about a week ago. I am working on a project for work, that requires to have a report of all the training records. But my boss wants it to be color coded. He wants one color to show the people's training classes that are 45 days out from being over due, he wants another color to show what classes are due. And another color that shows classes that are over due. In my table, I have a column for the classes that show the date that they took the class, and I have another column that shows the due date of the class. But I have no idea how to go about getting the report color coded with what he wants. Any help at all would be great. Many thanks in advance.
I am being asked to modify a old program for a new similar function.
In the blue heading bar above the tool bars there is a name (ECB License) for the database. I need to modify this name to the new name (wheat license).
Thanks for your help. GG
I have be requested to find or create something that will track and reports meals served at the camp.
They require breakfast,lunch,dinner and midnight meals recorded for each section and for the day.
I have look for an access db or and excel spreadsheet samples but not able to find anything.
Maybe someone here is already doing this or knows where I can finded something like this.
Thanks for everyones help.
:)
Hi,
I'm designing a database but it is turning into a bit of a state. :(
I Understand that my approach is probably poor but i am fairly new to Access. and realln need some advice/help
All other programs i have written have used inputs from list and combo boxes to wirte to a table. This is the first that reqires me to manipulate data already stored in a fixed sized datasheet.
I have two tables: tblMainProgressList and tblLog
The database is used to check the status of different 'line numbers' in a construction project. like a time line; when all boxes have been ticked, the project is complete!
the different Status's have been named STN1,STN2,STN3.. etc (Station1,2,3..) This will enable the program to be migrated to a different project by simply changing it's name instead of digging deep into and changing lots of code.
So far, when i click any STN tickbox, the reletive STNDate will be assigned with the current date. and likewise removed if the STN is unticked. (all from the Afterupdate event of the subform)
I have managed this with a large bunch of udate querys in SQL. However, this is just a prototype; the final design will have nearly 30 different stations! This means a huge amount of update querys that will probably make the operation of the program very slow.
surely there's a better method to handle this? :( (i'm all ears :D )
In a similar way, each time a STN is ticked, a reletive field (STN1Val, STN2Val...etc) is given a load value (percentage of project completion). A TOTAL field adds all STNVals to produce the total percentage complete.
Now, This all works (although the coding will probably be laughed at).
but my next taks is to send the data to a log each time it is updated:
So- for example . if STN1 is ticked on line-20000
i would like the last record in tblLog to store the data:
| Line No | Name | Date/Time | Total Load |
| line-20000 | PIDNoRev | 06.11.06 12.00 | XX |
where name is the name of the station that was ticked.
I really need some advice on how to single out the STN that i was ticked last, and write it to the name field in tblLog . If this is solved i could work out the rest.
Also any help on my update query issue will be greatly appreciated..
I have attached the database to make all this a bit clearer (hopefully)
Many thanks, Jamie