Hi,
When I click this buton I get an error on one of the following lines.. I can't figure out why and how to fix it.
the error I get is
run-time error '3464':
Data type mismatch in criteria expression.
I made the part where the error occurs in bold and italics
'submit for approval
Private Sub Command22_Click()
Dim rs As Object
Dim rs2 As Recordset
Dim db As Database
Dim name As String
Dim x As Integer 'will be used as flag for do while loop
Dim cnt As Integer 'this will contain the number of records in the recordset
'MsgBox (Me.projno)
Set db = CurrentDb
Answer = MsgBox("Are you sure you want to submit this timesheet?", vbYesNo)
'if cancelled
If Answer = vbNo Then
Else
x = 0 'initialize flag
Set rs = Me.Recordset.Clone
rs.MoveLast
cnt = rs.RecordCount
rs.MoveFirst
Do While x < cnt
If rs!statusPM = "pending" Then
MsgBox "This timesheet has already been submitted. You can't submit this again."
x = cnt
End If
If rs!statusPM = "approved" Then
MsgBox "This timesheet has already been approved by your supervisor. You can't submit this again."
x = cnt
Else
MsgBox (rs!projno)
Set rs2 = db.OpenRecordset("SELECT projmanager FROM Projects WHERE projno =" & rs!projno)
Do While Not rs2.EOF
name = rs2!projmanager
MsgBox (name)
rs2.MoveNext
Loop
rs.Edit
rs!statusPM = "pending"
rs!status = "pending"
rs.Update
x = x + 1
'MsgBox (rs!projno)
rs.MoveNext
End If
Loop
'clear variables
Set db = Nothing
Set rs2 = Nothing
End If
End Sub
order_id is an autonumber key field form table Orders_table. Is is also selected in the row.source for the form I am using. ComboOrder_ID is a combo box that looks up the order_id from the table with a SELECT... ... So I think the two should be the same datatype!
When I set the order_id in the combo the event procedure runs I get the following debug error:- Runtime error '3464': Datatype mismatch in criteria expression
This is the code for the after event on that combobox: [code] Private Sub ComboOrder_ID_AfterUpdate() ' Find the record that matches the control. Dim rs As Object Set rs = Me.Recordset.Clone rs.FindFirst "orders_table.order_id = '" & Me![ComboOrder_ID] & "'" If rs.NoMatch Then MsgBox "it's the <find> that is broken" Else Me.Bookmark = rs.Bookmark End Sub [end code] Any help is much appreciated Thx. Kev.
I had created a Access DB where there is a query named as "GenerateTimeHours", here whenever am trying to do a search by ID, Time & Date, always getting "data type mismatch error", I checked it and understand this Error is causing for Date Search Clause, I tried every possible way to change the date format, using #, etc etc but no result :Query As follows:
Code:
SELECT GenrateTimeHours.ID, GenrateTimeHours.MaximumSeatsNumber, GenrateTimeHours.DaysInMonth, GenrateTimeHours.Hour, GenrateTimeHours.Remaining, GenrateTimeHours.FinalSeats FROM GenrateTimeHours WHERE GenrateTimeHours.ID = 1 and GenrateTimeHours.Hour between #08:00:00 AM# and #10:00:00 AM# AND (GenrateTimeHours.DaysInMonth) between #7/2/2013# AND #7/3/2013#;
I have a table 'Project Details' to which I have recently added a new field 'Last Invoice issued'. This field is a text field with a lookup and will default to 'No' for new records being added. When the related record is updated in my 'Invoices' table, I have set up a query to change 'Last Invoice Issued' to yes. This is all working fine, but it requires all the records in 'Project Details' to contain 'No' already in order for it to work. As there are over 1000 records in 'Project Details' I made a list in Excel of the right number of no's and copied it in. Most records were fine with the exception of 127. I can edit any of the other fields from the 'Project Details' datasheet or my data entry form, but when I try to edit one of the 127, I get a DataType mismatch error. I can't understand since the records are all in one table and have exactly the same DataTypes set up for each field, why I can edit some and not others? Is there some other place where DataType can be set up that may affect some records and not others?
I have tried to copy my table to post here but when I do that, I get a 'Index or Primary Key cannot contain a Null value' error due to the (New) record having the default values already in but the primary key not being filled until I save,.
Code: Dim rs As Object Set rs = Me.Recordset.Clone rs.FindFirst "[OwnerID] = '" & Me![lstUsers] & "'" Me.Bookmark = rs.Bookmark <---- error is here for the datatype mismatch or No record found
I have this linked table query from a OBDC and I need to be able to filter out specific dates in that query. The dates in the table were in text format and I converted the dates using the CDate function. I wanted to filter the query to a single date and always I get the Datatype mismatch in criteria expression error.
However, filtering dates does work only when there are other specifications in the criteria fields (e.g. if I specify a date and and name). My SQL code in error looks like this:
SELECT purch_hist.PUITM AS ITEM, purch_hist.PUPO AS PO, purch_hist.PUQTY AS QTY_RECEIVED, CDate([purch_hist.PURDT]) AS RECEIPT_DATE, itmcnt.ITBYR AS BUYER, purch_hist.PUCST AS UNIT_COST, vendor.NVNO AS VENDOR NO,
[code]...
This query works fine with a non converted date field, however the dates I need are in text format and need to be converted since I do not have permissions to edit the tables.
I'm in datasheet design view and I'm trying to change the data type of a cell and add a lookup. When I try to change the datatype I get an error which says I need to remove a relationship first - except I did. I deleted all the relationships, saved and closed the relationship view and closed and reopened the table.
I have a form that is based on a parameter query. The user inputs an item number and the form opens in edit mode. The user clicks the "duplicate" command button and then changes the item number. I've incorporated GHudson's "A Better Mouse Trap" logic and when clicking "save" I get the type mismatch error.
I don't understand why Access is not returning the 3022 duplicate entry error.
When I click "debug" Access highlights the line as shown below:
Err_bSave_Click: If Err = 2046 Then 'The command or action Undo is not available now Exit Sub Else MsgBox Err.Number, Err.Description Resume Exit_bSave_Click End If
I am trying to do a basic query and I keep getting a "Type Mismatch" error and the query will not run. If I only do a query on one table, it works no problem so I know it must be related to my Join between tables.
For the two tables that are joined (it is one-to-many)- the first table is a clients table and I created a field called ClientNumber that is an AutoNumber. The second table is called TrainingRequests. This will store the training requests for each client and each client can have multiple training requests. I created a field called ClientNumber in it as well (this is what field I linked the tables by). But I set it to text instead of AutoNumber.
Is there a way to do a query with the two tables? Or will I have to change something in table design? I already have some data in the tables so I am not sure what direction to take.
Thanks for any help someone can provide. It would be greatly appreciated.
I am getting the following error when I try to present some information from a database:
Microsoft JET Database Engine error '80040e07' Data type mismatch in criteria expression. /tribute2.asp, line 168
The code relating to this is: The error line it is talking about is: Code:rsGuestbook.Open SQLstr, adocon
Code: <%Dim adoCon 'Holds the Database Connection ObjectDim rsGuestbook'Holds the recordset for the records in the databaseDim SQLstr'Holds the SQL query for the databaseSet adoCon = Server.CreateObject("ADODB.Connection")adoCon.Open = "PROVIDER=Microsoft.Jet.OLEDB.4.0;DATA SOURCE=c:inetpubftprootlocalusericlay emember ing.co.nzdb emembering.mdb;"strcustomerID = Request.QueryString("remID")Set rsGuestbook = Server.CreateObject("ADODB.Recordset") sqlstr = "select * from guestbook where guestbook.mid =" & strcustomeridrsGuestbook.Open SQLstr, adoconDo While not rsGuestbook.EOF'Write the HTML to display the current record in the recordsetResponse.Write ("<font face='Arial' size='2' color='#000080'><i>A tribute provided by ")Response.Write (rsGuestbook("confirstname"))Response.Write (" ")Response.Write (rsGuestbook("conlastname"))Response.Write ("</i></font><font face='Arial' size='1' color='#000080'><i> ")Response.Write (rsGuestbook("conrelationship"))Response.Write ("</i></font><br><br>")Response.Write (rsGuestbook("conmessage"))Response.Write ("<br>")'Move to the next record in the recordsetrsGuestbook.MoveNextLoop'Reset server objectsrsGuestbook.CloseSet rsGuestbook = NothingSet adoCon = Nothing%>
Can anyone see where I have gone wrong ... could it be something to do with the fact that 'remid' relates to another table in the database. Though when I did a reponse write on the sqlstr it is presenting the remid.
Could someone please help. I am in a serious time crunch and cannot figure out what I have done wrong. I have copied the module attached for the audit trail and have implemented it into my database. For some reason when I go to run the BeforeUpdate event I get a 13-Type Mismatch error. I have found a fix that will allow me to use the code without flagging an error, but I am not sure it is working properly now. Here is the fix.
1. Pass the form as an argument of the function Function AuditTrail(frm as Form)
2. Comment out these lines in the code 'Dim frm as Form 'Set frm=Screen.ActiveForm
3. Call the function in the BeforeUpdate event of the form and or subform as follows: Call AuditTrail(Me)
common error in VBA imports. It has happened with spreadsheets and text files I have users importing. An error message pops up "Type Mismatch." But the import appears to work correctly. So I added code that On Error, if error Like "*Type mismatch*" continue to next step. Now the user gets a longer error message: "The expression On Click entered as the event property setting produced the following error: Type mismatch." Again, the import still works, but this message is annoying! The even stranger thing is that I do not get this error message on my machine. Just the other users.
I've been trying to get a query to run but I keep the "type mismatch in expression" error message.It's the Invoice-Product Query in the attached file.I have tried changing the field types, the primary keys and messed around with the relationships but noting seems to work.
The parameters @subject and @type are simply strings selected from dropdown values.
The @date parameter is set by using a dropdown to select a timeframe to search in, specifically "Within 1 month", "Within 3 months", "Within 6 months". These options have the values "1", "3" and "6".
When the form is submitted the value of the selected option is passed into the following routine:
Dim valSelectedDate AsInteger Dim dateParameter AsDate valSelectedDate = ddlDate.SelectedValue dateParameter = DateAdd("m", valSelectedDate, (Date.Now)) cmdSelectEvents.Parameters("@date").Value = dateParameter
When I run the debugger the right date value seems to be being passed to the sql query (i.e. if the user selects "within 6 months" and today's date is 5th May 2005, then #05/11/2005# is passed as the parameter) but I get the error data type mismatch. The column eventDates.date is a Date/Time column.
I am getting this error in a query. The field generating the error is a calculated field using a custom function.The function is:
Code:
Public Function DecimalTime(dblEvalTime As Double) As Double DecimalTime = Hour(dblEvalTime) DecimalTime = DecimalTime + (Minute(dblEvalTime) / 60) DecimalTime = DecimalTime + ((Second(dblEvalTime) / 60) / 60) DecimalTime = Round(DecimalTime, 2) End Function
The dbalEvalTime parameter is passed in to the function as (DateIn+TimeIn)-(DateOut+TimeOut).
So the data type passed in is Double and the Function result is Double. The criteria i am applying in the query is simply <0.01. I have formatted the query field as #.00, 0.00 and General Number but it makes no difference.
I have also tried creating a second query using the first as its data source and applying the criteria in that query but still get the same error. Without the criteria the query runs fine.
I ahve declared custCount as an integer and id as a string that comes from the user form (id = me.CustID) and trying to count the number of matching records in the recordset (rst) using the following:
custCount = DCount("[customerId]", rst, "[customerId] like '" & id & "'")
I'm getting a type mismatch error on the DCount statement?
I am creating a simple query in a farm audit database.
In criteria of the customers field, i have entered "Farmer One" as this is the customers data which I want to retrieve and in the Totals section I have changed the setting to Where instead of group by, but I am still getting "Data type mismatch in criteria expression" popping up.why this is?
I am using MS Access and Excel 2007. I have a query that I need to export to a specific sheet in excel, and the vba is working great and doing what it should. Problem is, some of the data is being exported as numeric, not as text which is what I need. I have several tables related to one another and the fields that were created with the LookUp Wizard and the ones that are not exporting property. From what I have read online, the data that is being exported is from the bound columns, which are the primary key "ID" fields. I have read online that I need to JOIN tables so that Access knows how to identify the foreign keys, but no matter how I do that, it is still exporting the "ID "fields and not the description.
Here is the SQL that I am trying to export:
SELECT tblSampleNew.*, qryProjectSearch.Company, qryProjectSearch.ProjectName, qryProjectSearch.SampleDate, qryProjectSearch.SubmissionDate, qryProjectSearch.SamplePriority, qryProjectSearch.DueDate FROM qryProjectSearch INNER JOIN tblSampleNew ON qryProjectSearch.IDNumber = tblSampleNew.IDNumber;
the qryProjectSearch.Company is one of the fields that is exporting incorrectly. I have tried to JOIN it to the original table by adding in this expression to the SQL above:
FROM qryProjectSearch INNER JOIN tblClients ON qryProjectSearch.Company = tblClients.ID
This gives a mismatch error, since one field is text type and the other is number, but even when I adjust that, it is still exporting as numbers and not text.
The annoying thing is that when I go to External Data --> Export to Excel Spreadsheet, every exports as text like I want!