Delete Certain Records Based On Selected Date - Data Type Mismatch In Criteria Expression

Aug 24, 2015

I want to delete certain records based on the selected date. However, I come across with this is error - Run time error '3464' (Data type mismatch in criteria expression).This part is highlighted in yellow. I even used the debug.print to test out if the sql statement is executed properly.

Code:
DoCmd.RunSQL DelSummarySQL

Here is my full code

Code:
Private Sub cmd_Delete_Click()
Dim DelSummarySQL As String
Dim StartRange As Date

[code]...

View Replies


ADVERTISEMENT

Data Type Mismatch In Criteria Expression

Jul 18, 2005

I am getting the error "Data type mismatch in criteria expression" when I put sorting on the following field in a query:

3 Month Date: DateAdd("m",+3,[Current Date])

If I remove sorting the query works fine. When I add sorting to this column in the query design grid, I get the error message.

Any ideas?

Thanks,
BJS

View 8 Replies View Related

Data Type Mismatch In Criteria Expression

Apr 11, 2006

can someone tell me why I getting this error when I try and run this query:

select distinct case_id
from NOLDBA_RPT_CASE_CHG_IND G

where
sys_curr_date between '01/01/2005' and '12/31/2005'
and aft_case_status = 'O'

and not exists
( select 1 from NOLDBA_RPT_CASE_CHG_IND X
where X.case_id = G.case_id
and X.aft_case_status = 'C'
and X.sys_curr_date = G.sys_curr_date )

Thanks

View 4 Replies View Related

Data Type Mismatch In Criteria Expression

Apr 3, 2008

Hi All

I would be much obliged if someone would help me here.

I have the following code which takes a value from a combobox and uses it in an sql statment to find a certain record and then it populates the GUI with that recordset , however I get the following error "Data type mismatch in criteria expression"

Please help

CODE:

Private Sub cmdSearch_Click()

Dim sql As String
Dim rsUpdate As New ADODB.Recordset


On Error GoTo DbError

sql = "SELECT * FROM ServiceReport WHERE CallReferenceNo= " & Me.cboSearchRef.Value


rsUpdate.CursorType = adOpenDynamic
rsUpdate.LockType = adLockOptimistic

rsUpdate.Open sql, remoteConnection, , , adCmdText

If rsCategories.EOF = False Then
Me.txtDate = rsCategories!Date
Me.cboModel = rsCategories!Equipment
Me.txtHK = rsCategories!HongKongFaultNo
Me.txtInvoice = rsCategories!InvoiceNo
Me.txtRef = rsCategories!CallReferenceNo
Me.txtSerial = rsCategories!SerialNo
Me.txtSite = rsCategories!Site
Me.cboClient = rsCategories!Client
Me.chkCompleted = rsCategories!Completed
Me.chkHK = rsCategories!HK
Me.chkRepaired = rsCategories!Repaired
Me.chkSpares = rsCategories!Spares
Me.chkTested = rsCategories!Tested
Me.cldComp = rsCategories!CompletedDate
Me.cldExp = rsCategories!ExpectedDate
End If



MsgBox "Record Found.", vbInformation

rsCategories.Close
SetRecordset

Exit Sub

DbError:

MsgBox "There was a freakin error finding that record, go figure." & Err.Number & ", " & Err.Description

End Sub


THANKS

View 3 Replies View Related

Data Type Mismatch In Criteria Expression

Feb 8, 2006

hi guys, here is my problem.the error in the title appears when i try to update a record.the field MODON in the table is defined as a short date and an input date 00/00/0000.Here is the code where i insert and update the records: Option Compare DatabaseOption ExplicitPrivate Sub Command4_Click()On Error GoTo Err_Command4_Click Dim stDocName As String Dim stLinkCriteria As String stDocName = "frmCalendar" DoCmd.OpenForm "frmCalendar", , , , , acDialog, Me.name & ";modon"Exit_Command4_Click: Exit SubErr_Command4_Click: MsgBox Err.description Resume Exit_Command4_Click End SubPrivate Sub Command15_Click()Dim str1 As DateOn Error GoTo Err_Command15_Click 'DoCmd.SetWarnings False If DCount("[comment]", "comments", "[change_id]=" & Me.Task_Num & "") = 0 Then MsgBox "insert" DoCmd.RunSQL "insert into [comments] (change_id,modon,comment,modby,modif) values (" & Me.Task_Num.Value & ",'" & Me.modon.Value & "','" & Me.Text10.Value & "','" & Forms!Login!username1 & "','" & Now() & "');" DoCmd.SetWarnings True Else MsgBox "update" MsgBox DLookup("[comment]", "comments", "[modon]='" & CStr(Me.modon.Value) & "'") DoCmd.RunSQL "update [comments] set comment='" & Me.Text10.Value & "' where change_id=" & Me.Task_Num & " and [modon]='" & Format(str1, "dd/mm/yyyy") & "';" DoCmd.RunSQL "update [comments] set modby='" & Forms!Login!username1 & "' where change_id=" & Me.Task_Num & " and [modon]='" & Me.modon.Value & "';" DoCmd.RunSQL "update [comments] set modif='" & Now() & "' where change_id=" & Me.Task_Num & " and [modon]='" & Me.modon.Value & "';" End If DoCmd.SetWarnings True Exit_Command15_Click: Exit SubErr_Command15_Click: MsgBox Err.description Resume Exit_Command15_Click End SubPrivate Sub Command16_Click()On Error GoTo Err_Command16_Click DoCmd.CloseExit_Command16_Click: Exit SubErr_Command16_Click: MsgBox Err.description Resume Exit_Command16_Click End SubPrivate Sub Command4_Exit(Cancel As Integer) If IsEmpty(Me.modon) Then MsgBox "Please, select a date for the minute" Me.modon.SetFocus Else Me.Task_Num.Visible = True End IfEnd SubPrivate Sub Form_Load() Me.Text13.Visible = False Me.Text10.Visible = False Me.Label12.Visible = False Me.Label9.Visible = False Me.Task_Num.Visible = FalseEnd SubPrivate Sub task_num_AfterUpdate() If IsEmpty(Me.Task_Num) Then MsgBox "Please, select a task Number" Me.Task_Num.SetFocus Else Me.Text13.Visible = True Me.Text10.Visible = True Me.Label12.Visible = True Me.Label9.Visible = True Me.Text13 = DLookup("[description]", "newchange", "[change_id]=" & Me.Task_Num & "") Me.text10 = DLookup("[comment]", "comments", "[change_id]=" & Task_Num & " and [modon]='" & Me.modon.value & "'") End IfEnd Subthx in advance....

View 2 Replies View Related

Data Type Mismatch In Criteria Expression. Where?

Feb 26, 2006

I am trying to set a recordset, and I keep getting this data type mismatch error, but I cannot see what the problem is. Here's my code:

Set rstAccounts = dtbCurrent.CreateQueryDef("", "SELECT [Account ID], [Balance] FROM tblAccounts WHERE [Account ID]='" & txtAccountID.Value & "';").OpenRecordset

txt.AccountID.Value is 1, and when I hard code the value as 1 it works, so I'm not sure what the problem is. I've tried using CStr() to convert it to a string, CInt() to convert it to a integer (even though it already is one), with using both quotes, with only double quotes, and with only single quotes. It's driving me crazy, because i'm sure it's something really simple, but I'm not sure what else to try.


Thanks in advance.

View 4 Replies View Related

Modules & VBA :: Data Type Mismatch In Criteria Expression

Nov 8, 2014

The error I'm getting is "data type mismatch in criteria expression".

Private Sub BtnAddBooking_Click()
Dim CustomerID As String
Dim StaffID As String
Dim intPos As Integer
Dim strSQL As String
Dim strSQL2 As String
Dim BathValue As Integer
Dim rst As DAO.Recordset
Dim RemainingBookingExists As String
Dim RemainingBaths As Integer
Dim RemainingBathsExists As String

[code]....

View 2 Replies View Related

Queries :: Data Type Mismatch In Criteria Expression?

Apr 29, 2014

I have a query which runs fine until I set a criteria (of True) in the field

Code:
chase_it: prevwd([practice_bacs_submission_date])<Date()

So without the criteria, I have

Code:
SELECT prevwd([practice_bacs_submission_date])<Date() AS chase_it, practice_bacs.practice_bacs_submission_date
FROM practice_bacs
WHERE (((practice_bacs.practice_bacs_submission_date)>#1/31/2013#));

and in the query results I see 0 and -1 as expected for the 'chase_it' expression BUT When I add True (or -1, or 0) as a criteria for 'chase_it', I get the "Data type mismatch in criteria expression" error.So the sql that fails is

Code:
SELECT prevwd([practice_bacs_submission_date])<Date() AS chase_it, practice_bacs.practice_bacs_submission_date
FROM practice_bacs
WHERE (((prevwd([practice_bacs_submission_date])<Date())=True) AND ((practice_bacs.practice_bacs_submission_date)>#1/31/2013#));

In case it's relevant, my function prevwd is:

Code:
Function prevwd(dt As Date) As Date
10 On Error GoTo prevwd_Error
20 dt = dt - 1
30 While Weekday([dt]) = 1 Or Weekday([dt]) = 7 Or IsBankHoliday(dt)

[code]...

and this function is used extensively and always works perfectly. I have tried using DateAdd instead of dt = dt - 1, but that made no difference.

View 14 Replies View Related

Error - Data Type Mismatch In Criteria Expression

Nov 22, 2011

I am creating a simple query in a farm audit database.

In criteria of the customers field, i have entered "Farmer One" as this is the customers data which I want to retrieve and in the Totals section I have changed the setting to Where instead of group by, but I am still getting "Data type mismatch in criteria expression" popping up.why this is?

View 2 Replies View Related

Invalid Format? Data Type Mismatch In Criteria Expression

Jan 30, 2008

Hi,

I am trying to insert a text box value into a text field value in a table. I am checking to see if the value is already in the table but come across an error on the second click. The first click enters the number, and the second click gets error. I know where the error is but I'm not sure why or how to fix it.

Code:Dim db As DAO.DatabaseDim rs As DAO.RecordsetSet db = CurrentDb()Set rs = CurrentDb.OpenRecordset("CVHOLD", dbOpenDynaset)If Not rs.BOF Then rs.MoveFirstrs.FindFirst "[Batch Number] = " & Me![Batch Number]'Error here on second passIf (rs.EOF) Then 'Seems to insert new record properly 'No Batch Number in Table yet. rs.AddNew rs("Batch Number") = Me![Batch Number] rs("Date Closed") = Now() rs.Update rs.CloseElse 'never enters, jumps to Error label 'Batch already listed in table MsgBox ("Batch already in table. Updating Closed date")End IfErr_cmdHoldStatus_Click: MsgBox Err.Description

This is what the debugger outputs for my values
Code:Me![Batch Number] : 81697 : Object/Textbox rs("Batch Number") : "81697" : Object/Field rs.BOF : False : Boolean rs.EOF : False : Boolean

View 1 Replies View Related

Modules & VBA :: Run Time Error - Data Type Mismatch In Criteria Expression

Aug 11, 2014

I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:

Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean

[code]....

View 5 Replies View Related

General :: Error 3464 / Data Type Mismatch In Criteria Expression

Jun 23, 2012

"Data type mismatch in criteria expression" Error 3464

I get this on the <DoCmd.OpenForm "frmWrittenStatements"> in my code.

How on earth are any criteria attached to this?

View 2 Replies View Related

Queries :: Combination Of Letters And Numbers = Data Type Mismatch In Criteria Expression

May 16, 2013

I am working on a fairly ancient manufacturing database that identifies items using a combination of letters and numbers. The usual format is to have a letter (which suggests something about the item type) followed by a sequence of numbers.

I am trying to write a query that looks up all the records beginning with a prefix or arbitrary length, strips away the text, and finds the highest number.

Code:

SELECT Right(LocalID,Len(LocalID) - 1) As IDSuffix
FROM tblItemIDCrossReference
WHERE Left(LocalID,1) = 'T' AND IsNumeric(Right(LocalID,Len(LocalID) - 1)=True)

This query produces the error given in the title of this thread, whilst the following works:

Code:

SELECT Right(LocalID,Len(LocalID) - 1) As IDSuffix
FROM tblItemIDCrossReference
WHERE Left(LocalID,1) = 'T' AND IsNumeric(Right(LocalID,5)=True)

This related query also works and shows a load of -1s and 0s correctly

Code:

SELECT Right(LocalID,Len(LocalID) - 1) As IDSuffix,
IsNumeric(Right(LocalID,Len(LocalID) - 1)=True) As Alias
FROM tblItemIDCrossReference
WHERE Left(LocalID,1) = 'T' AND

But once again shows the error message when I try to filter the field Alias to -1 or 0 only through the right-click menu.I have tried piping Len(LocalID)-1 through CLng, CInt, Int, CDbl and CSng; this changes the error to 'Invalid Use Of Null' I have also tried removing the '=True' from the IsNumeric() term.

View 2 Replies View Related

Queries :: Balance Update Query - Data Type Mismatch In Criteria Expression

Jul 25, 2013

I have an update query for tGLCashAccount where it adds a value from another table with the BeginningBalance to arrive at CurrentBalance.

Here's what it looks like in design view:

Field: CurrentBalance
Table: tGLCashAcct
Update to: [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance]

Here is SQL code:
UPDATE tGLCashAcct, tMakeNewCashBal SET tGLCashAcct.CurrentBalance = [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance]
WHERE (((tGLCashAcct.GLCashAcctID)="102"));

I get the error: data type mismatch in criteria expression when I run it.

View 3 Replies View Related

Passing Parameters Thru Combo Selection: ERROR:Data Type Mismatch Criteria Expression

Oct 17, 2006

I am trying to pass parameters to my qury thru my combo selection. I keep getting this error "Data type mismatch criteria expression", does anyone have an idea why?
WHERE (((fShiftWorked([tblTimeLog].[timeStart])=[Forms]![frmOperatorWorkDone]![cboShift] Or IsNull([Forms]![frmOperatorWorkDone]![cboShift]))=True));


I have spent so much time onthis already and i am sick of it :mad:


Attached is my db. Please help me out here.

View 2 Replies View Related

Criteria For Date Field Causing 'data Type Mismatch' Error

Jul 31, 2005

Hi,

I have a query with a field defined in the query as follows:

Next Bill Date:
IIf(IsNull([dtmLastBillDate]),
DateSerial(Year([dtmDateRecd]),Month([dtmDateRecd])+1,15),
DateSerial(Year([dtmLastBillDate]),Month([dtmLastBillDate])+[lngNumMonths],15))

I can't seem to set any criteria for this field without getting an error:
'Data Type Mismatch in Criteria Expression'

Examples of criteria that I've tried:
=#1/1/2005#
>#1/1/2005#
=Date()
Year([Next Bill Date]) = Year(Now())

All of the above generate that same error.
{I've seen many pages/posts regarding 'data type mismatch' but none seem to relate directly to this situation.}

I could use some help, fast!

Thanks in advance,
David

View 1 Replies View Related

Delete Records Based On Date Criteria

Aug 16, 2005

I have a table that stores records by "return date". I would like to create a delete query that removes all records that fall outside of the date range entered on a specific form (frmMainMenu).

I can deleted the records that match the form criteria, however that is not what I need. The criteria used to delete the records was:

Between [Forms]![frmMainMenu]![from date] And [Forms]![frmMainMenu]![to date]

Let's say that the frmMainMenu contain the date range of 8/1/05 to 8/10/05, however the table contained data from 6/1/05-8/14/05, I would like for the query to delete all records that have a date 6/1/05-07/31/05 and 08/11/05-08/14/05.

Any assistance would be greatly appreciated. Thanks in advance for your help![/SIZE]

View 1 Replies View Related

Data Type Mismatch In Query Criteria????

Nov 4, 2006

Query1:

Src: Table1 joined Table2

ID (Type Text)
Title (Type Text)
Remarks(Type Text)
Formatted: FormatTitle([title],[Remarks])
Expr1: InStrRev([Formatted], "~")


public functionFormatTitle(ByVal sTitle as String, ByVal sRemarks as String) as String
'do process code here very complicated an long, but works find in the end
'creates a Multi-String delimited by | (pipe)
end function

The above works, and Expr1 does give an accurate value for the position of a "~" (tilde) in the string Created by the FormatTitle() function.

However, If I put a Criteria >0 on Expr1 it asks for the value of the [Formatted] field as if it was a parameter. If I put a criteria for Formatted: Like "*~*" I get a Data Type Mismatch in Query Criteria

Query2:
Src: Query1
Title (Type Text)
Remarks (Type Text)
Formatted(Type Text)
Exr1 (Type Number) criteria >0

This Query Also produces the Data Type Mismatch in Query Criteria
pardon me, but WTF? If it isn't a STring, than InStrRev() should produce an error, not an accurate response, and if InStrRev() produces a number why can't i compare it to 0 (zero)? This is indubitably messed up that I'm getting this error. There is no data type mismatch, on either of these tests, one is a string and I criteria-limit it by a string operation, the other is a number and I criteria limit it by a number, WHAT IS GOING ON!!!

Thanks
Jaeden "Sifo Dyas" al'Raec Ruiner - The Frustratedly Confused

View 2 Replies View Related

Queries :: Data Type Mismatch In Criteria Error

Aug 8, 2013

I am getting this error in a query. The field generating the error is a calculated field using a custom function.The function is:

Code:

Public Function DecimalTime(dblEvalTime As Double) As Double
DecimalTime = Hour(dblEvalTime)
DecimalTime = DecimalTime + (Minute(dblEvalTime) / 60)
DecimalTime = DecimalTime + ((Second(dblEvalTime) / 60) / 60)
DecimalTime = Round(DecimalTime, 2)
End Function

The dbalEvalTime parameter is passed in to the function as (DateIn+TimeIn)-(DateOut+TimeOut).

So the data type passed in is Double and the Function result is Double. The criteria i am applying in the query is simply <0.01. I have formatted the query field as #.00, 0.00 and General Number but it makes no difference.

I have also tried creating a second query using the first as its data source and applying the criteria in that query but still get the same error. Without the criteria the query runs fine.

View 12 Replies View Related

General :: ELookup With Multiple Criteria - Data Type Mismatch

Apr 17, 2013

I'm trying to use the following expression:

=IIf(ELookUp("EventDate","qsfrmEvents","[EventID] = 8 And [fkClaimID] = ' & [Forms].[frmClaim].[txtClaimID]'")>0,True,False)

But I'm getting a data type mismatch. txtClaimID is numeric, but if I take out the single quotes I get a syntax error.

View 2 Replies View Related

Queries :: Data Type Mismatch For Date

Jul 17, 2014

I'm trying to create a query based on another query. However, my WHERE statement is causing a data type mismatch for a date. My code is:

Code:
SELECT id, status, updated, [previous renewal]
FROM qrynext renewal
WHERE status = "active" and [previous renewal] = date()

If I remove the " and [previous renewal] = date()" it works just fine. But even setting up [previous renewal] to equal #7/17/14# or "07/17/14" or anything else I've tried won't work. The field that it's based on is definitely a date field, but I don't know why it would cause a data type mismatch.

View 14 Replies View Related

Date Parameter Cause 'data Type Mismatch Error'

May 5, 2005

hi

I'm writing a pretty simple application to search an Access db. The query is:

Me.cmdSelectEvents.CommandText = "SELECT eventDetails.id, eventDetails.subject, " & _
"eventDetails.title, eventDetails.trainers, eventDetails.type, eventDetails.summary, " & _
"eventDetails.url, eventDates.date " & _
"FROM eventDates INNER JOIN eventDetails ON eventDates.id = eventDetails.id " & _
"WHERE (((eventDetails.subject)=@subject) AND ((eventDetails.type)=@type) AND ((eventDates.date)<@date));"

The parameters @subject and @type are simply strings selected from dropdown values.

The @date parameter is set by using a dropdown to select a timeframe to search in, specifically "Within 1 month", "Within 3 months", "Within 6 months". These options have the values "1", "3" and "6".

When the form is submitted the value of the selected option is passed into the following routine:

Dim valSelectedDate AsInteger
Dim dateParameter AsDate
valSelectedDate = ddlDate.SelectedValue
dateParameter = DateAdd("m", valSelectedDate, (Date.Now))
cmdSelectEvents.Parameters("@date").Value = dateParameter

When I run the debugger the right date value seems to be being passed to the sql query (i.e. if the user selects "within 6 months" and today's date is 5th May 2005, then #05/11/2005# is passed as the parameter) but I get the error data type mismatch. The column eventDates.date is a Date/Time column.

Can anyone help?

View 3 Replies View Related

Type Mismatch In Expression

Jun 5, 2006

This is an Access 2000 question.

Now, I know what the error message is supposed to mean, despite my total newbie-ness. My table Product has p/k ProdID (autonumber, long integer) and my table Items has ProdID (number, long integer) as a f/k. It's a one-to-many relationship (each Item is only one kind of Product, but each Product may have multiple Items.) But when I try to run a query in Access, I get the "Type mismatch in expression" error. The only relationship is between a number and an autonumber as described above.

Does anyone know what might be going on?

View 2 Replies View Related

Type Mismatch In Expression???

May 26, 2005

hey,

can someone pls tell me why i get an Type mismatch in expression err with this code:

INSERT INTO tblACAD ( PROIZVAJALEC, TIP, DN, KOSOV )
SELECT tblsifrant.Proizvajalec, tblsifrant.Tip, tblsifrant.DN, tblsifrant.Kosov
FROM tblsifrant, tblACAD
WHERE (((tblsifrant.Sifra)=[tblACAD.TIP]) AND ((tblsifrant.DN)=[tblACAD.DN]) AND ((tblACAD.KOSOV)>0));

If i remove one criteria to get this code then there are no err, but thats not what i want:

INSERT INTO tblACAD ( PROIZVAJALEC, TIP, DN, KOSOV )
SELECT tblsifrant.Proizvajalec, tblsifrant.Tip, tblsifrant.DN, tblsifrant.Kosov
FROM tblsifrant, tblACAD
WHERE (((tblsifrant.Sifra)=[tblACAD.TIP]) AND ((tblACAD.KOSOV)>0));


I create this code in design view so all the names and tables are correct.

So does anyone have any ideas?

Thx

View 2 Replies View Related

Type Mismatch In Expression

Dec 20, 2005

Hi all,

I'm using DB to run a small poker league, here's my setup.

Tables:
players - player_id (autonumber), player_name (text)
tourn - tourn_id (autonumber), venue (text), entry_fee (number, currency), tourn_date (date/time, medium date), n_entrants (number, integer<>0)
status - status_id (autonumber), player_name (from players table), tourn_id (from tourn table), position (number, integer<>0), winnings (number, currency)

I'm trying to create a query, that groups by player name, the count of tourn_id, victories (count of position=1), cash_prizes (count of winnings>0), sum of winnings, sum of entry_fee, net winnings (sum of winnings - sum of entry_fee)


With the help of someone else, I get this, but I keep getting error msg "type mismatch in expression"

SELECT P.player_name, Count(T.tourn_id) AS CountOftourn_id, Sum(S.winnings) AS SumOfwinnings, Sum(T.entry_fee) AS SumOfentry_fee, (SELECT Count(position) FROM status WHERE position =1
AND status.player_name= P.Player_Name) AS victories, (SELECT Count(winnings) FROM status WHERE winnings>0
AND status.player_name= P.Player_Name) AS Cash_prizes
FROM tourn AS T INNER JOIN (players AS P INNER JOIN status AS S ON P.player_name=S.player_name) ON T.tourn_id=S.tourn_id
GROUP BY P.player_name;

What's wrong with the above?

Thanks in advance

Raju

View 5 Replies View Related

Type Mismatch In JOIN Expression

Aug 15, 2005

I don't quite understand this error message, and therefore cannot begin to fix it. One of my forms will not open except in design view because of a "Type Mismatch in JOIN expression" error. Can someone please tell me where to look to fix it? Thanks.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved