I have a form for entering Retirement Plan information (frmRRSP) that has tblRRSP as its recordsource. The RRSP Rate is a field with a Number datatype (in the table) and a Percent format on the form. When I enter a value on the form it originally displays the value I enter, until I press the Enter key, then it changes to "####" an enters a value of 0 in the table field.I tried entering a value directly in the table and it changes to 0 when I press Enter.I have an almost identical form and table for Vacation and it does the same thing.
I am new to VBA, and i need some help in my system..... basically i am creating a appointments Form, and in this i have some txt fields and a listbox which contains the available times ... What i want my form to do is that as the user enters the values in the form and the time selected, as clicking the "set Appointment" button it should add the values to the table.
I have included a word document of my form: Just as some help... Could you guyz help me with the coding... I am not at all good at coding! Thanx alot guys.. I really appreciate your help!!
Hey there, Im currently making a form so users can enter project information. For this particular project, the user must choose from a variety of options, and each option has a number value assigned to it for a rating. Now at the end of this form, I want a sum of the ratings, and then entered into the table. I am using a text box for the sum of ratings, and can get the sum of ratings to work on the form, but this data is entered as a 0 in the table. If anyone could help me find a way to put the actual sum in the table, that would be excellent.. thx a lot.
If it would be any help, here are the names of text boxes that I'm adding:
Health and Safety Rating, Maintenance Rating, Equipment Rating, School Size Rating, Student Enrollment Rating, SD Priority Rating, Project Requested Previously Rating
I need to enter workload counts for 10 people, and it is done on a monthly basis. So I have a table of Months (Jan-Dec), a table of names, and a joined table with the months, names and a field for the workload counts.
I would like to make a form where I could select the month and all the names show up so I could go and enter the counts for everyone at the same time. I've attached a diagram to show what it would look like
I am trying to figure out to have the current date populate in table field by using a button on a form and not having much luck.
I have a table with 2 date fields, a 'created' field and a 'received' field. I already have the date set to auto populate for the 'created' field but I don't want the 'received' field to populate until the employee has gone into the database to receive the work.
I know I could have the employee just enter the date, but i want to avoid any typos or people simply forgetting to do it.
Ideally I would love the button to enter the current date into the 'received' field and save the entry, but I fine it needs to be 2 seperate buttons.
Hi!, I am trying to make something to make my job easier. To be honest I am a beginer in this field. I am having a field, when I enter one value ( let that be 10) it should pop up one form and if another value ( let that value be 20) it should pop up another form. or else I can explain in this way If data field value = 10 then it should run macro 1 & if data field value = 20 then it should run macro 2
I have a 1 row table as a result of 2 queries that give me the 'MaxYear' AS 'DefaultYear' and 'MaxWeek' AS 'DefaultWeek' in that year for a selected retailer and stores, from a master table.I want the default Year and Default Week text boxes to display the values of these
I have tried pointing to a table holds the results and pointing to the queries for each box...I have used Form.Refresh and Forms.Requery but nothing picks up my values.
I am wanting to populate a field by entering a date in another field. I am trying to determine age(years, months, and weeks) of something by entering a date in another field. Is that possible in Access?
I am creating a form and one of the fields are 'Area Code'. Input will be along the lines of 02 and 03, but whenever I do this it deletes the 0, just leaving a 2.
I have a form where I want to enter an ID and then see the Name in the next field. How do I do that? Everytime I enter an ID I get "?Name" in the next field.
The Table is "BudgetLine" and I enter an ID from a table "Item"
uh.. I guess the title pretty much sums it up... Is there a way to enter data in a text box or something once, and have it applied to all the filtered records?
I have it set up so that we can sort by project number, and it displays only the invoices that havent been assigned to a bill (we recover the expenses form our parent company). I dont want to have to enter the same bill number to each of the filtered records individually.
I have message box come up in the On Enter of field (ContactTypeID):
Code: Select Case MsgBox("Take care when editing this field!", vbOKCancel Or vbExclamation Or vbDefaultButton1, "Access DB") Case vbOK Case vbCance Me!Listing.SetFocus End Select
to warn the user that this will change the contact type of the record.When I click the field everything works fine except I'm not able to enter the next field. All other fields I'm able to enter. Also, when I try top enter the next field (Phone) I get the message box for the other field even though I have nop message box function for that field.
I have form named home page in this homepage form in the form header i have inserted some fields from some tables like province, district, community etc. these fields are unbound and are used for filtering purposes, when i select a province all districts related to that province displayed and when i select a a district all related communities displayed, there is a one to many relationship between district table and community table,
What I want is, when i select a district on the form header(it is unbound as i explained before) of this homepage form, the DistrictID should appear in community subform under DistrictID(as there is a one to many relationship between district and community) .
For more clarification find the snap shot attached...
I am creating a log in form, it checks the user name which is unique. if the user has entered a password, it shows only one password text box, they enter the password, if it is correct they enter the database, otherwise they return to the text box.
But if they have not entered a password before the form opens with two text boxes, one for the password and one to confirm the password is typed correct, if the are different a message box shows telling them that they are different, now is where i having problems, when they have typed the two passwords and they are correct i want them to save this password in the same record "Password" as the selected "username" record, I can find the "username" record by doing a Dlookup, easy, but i am stuck how to then save the password from the text box where the selected username record is.
My table "staff" has fields of "IDStaff", "FirstName", "Surname", "Password", "Username".
I have a simple table with two fields in that table called:
1. BankName 2. BankNumber
Each bank has a bank number. For example Bank XYZ and all of its branches have the same Bank Number 123. There are 5 banks I have listed in a combo list under the BankName field. I can also type in a different bank in that same field if it is not listed in the combobox list.
Now, I want the BankNumber to automatically populate based on what I choose under BankName. If the BankName is manually entered (for banks that are not in the combobox), or if the BankName field is blank, I want the BankNumber field to be able to enter a number manually.
For example, if I go to the BankName field and under the combobox I select Bank XYZ, i want the BankNumber field to automatically populate as 123. If the BankName has a bank name that was manually entered, i want BankNumber field to allow me to manually enter a number.
Thanks for ur help. I couldn't figure this simple request out.
In trying to respond to another thread, I have run into something that is confounding me (or maybe I'm just getting dense).
We have a subform. One field has an event on DblClick to launch a search form. When the user identifies the target, he/she clicks a button on the subform. This pushes the appropriate value into a field on the original subform using VBA code and closes the search form. This all works fine.
The behaviour that is driving me bugging is when the user clicks on a new record (i.e. new line) on the subform, we would like to automatically generate the next record (E.g. when you type in a field of a record with autonumber in datasheet mode, Access automatically generates the next record). Currently this doesn't happen - Access generates the PK for the record being modified, but doesn't generate the view of the next record.
What really confuses me is that I have created similar looking example in which this works just fine. I can't figure out which of the differences between the two samples is causing this behaving.
Also, typing information into the field on the subform does cause the next record to be generated. It is just doing this via code that works in one case but not another.
I have narrowed it down to the actual subform. Even as a standalone form the form exhibits the same behaviour.
For reference, the original thread is http://www.access-programmers.co.uk/forums/showthread.php?t=99457
I get this strange behavior in multiple forms I have. When I click on a field for the first time, I get a quick popup that immediatly disappear. It only get the popup when I enter fields I added for search purpose (a listbox which has a query as source, which I build with the value from another input field that the user type in).
I get the error when : -I enter the input field for the first time -I type in a value for the first time -I select an element in the listbox -Also when I open a form for the first time (happens only for the first opened form)
I don't even have time to see what it is in fact. I had to time a screenshot to see what it was.
So, I get an error like this : "Search referenced file : MSOUTL.OLB". No text in the msgbox, only that title.
[URL] .....
I checked google, found various reference to Outlook stuff. Problem is, I don't use any outlook stuff. I don't get any of those popup when I open the projet under Access 2013, but under Access 2010 I get them. I created the project under Access 2013, but users will use Access 2010.
I have a form that I use to collect selection criteria for reports. The controls on the form are combo boxes and date fields. After I run the report, I would like all of the fields on the form to be cleared of the selected values that were used to run the previous report. I have tried the 'repaint' method but it does not work.
I apologize if this has probably been asked countless times; however, in my search of this forum I could not find something that seemed to work for something so simple.
I have 2 forms. The first form is my main form and the second form is my "popup" form. Both of these forms access the same table. In my main form I have it so people can not enter in a ID so it reduces accidental data entry. Therefore, I created a "popup" box that allows ID entry.
Everything works great except when I close out of the popup form, the newly entered data is not available unless I close the main form and reopen.
Million Dollar Question:
How do I refresh or requery (dunno the correct term usage here) the main form to reflect the addition I made in my popup form. I would like the refresh event to happen when I click the close button on my popup form.
im having difficulty adding data into a table which i created, i want to use two or more of the same Student_ID's into one field, while adding different data into another field Subject.
I have a "Currency" field in a table and it holds large numbers (on which I will need to do basic arithmetic operations at some point, so I must store them as a numbers). I have set the "Standard" format on the TextBox used to display it on a form because I want to have thousand separators; I've also set "0" for decimals as I don't need to display them.
So everything displays as I want it even with the largest number that can be stored all the decimals are showing in the text field, but when I click on the field to edit the value instead of having the complete value it is displayed as scientific notation. I would like to display the complete value when editing it instead of the scientific notation, how can I achieve this, if it is possible?
A numeric example: If a user enters 1234567891012, the value displayed is indeed 1234567891012 but if they click on the field again the displayed value while editing is 1.23456789012E+11 (and it switches back to normal notation when the focus changes to another field). I would like to show 123456789012 all the time. I know that Access is capable of it most likely because if I set the Format to "Fixed" the values are always displayed completely (no scientific notation), but unfortunately I would like the thousands separators to show and it is not possible with the "Fixed" format.
Two last details, the scientific notation while editing does not kick in unless there is more than 11 digits in the number and the field width (and/or TextBox width) are sufficient to display up to 20 digits.
I'm certain this question has probably been asked before, but I can't seem to find it!
I have a form field called fldTitle, and want to ensure users write something that is meaningful by evaluating words within the title to a table of keywords (tblKeywords). I know how to write the IF/ENDIF and the other stuff required, but am struggling to find the right commands to do the comparision. Could someone help me out?
Client records from tblClient contain a field called Client_CID (Primary Key), as the Client ID. There are also fields Client_HIGH_FILE_NO, a numeric value of the last case number assigned to the specific client and Client_PREFIX that contain a unique three letter prefix that identifies the client.
Case records from tblCase contain a field called Case_CFN (Primary Key), as the Case File Number. tblCase also contains a field called Client_CID that contains the Client ID associated with the case (obtained from a combo box lookup from tblClient).
My form is frmCase bound to tblCase.
The Case_CFN is constructed by combining the value of the selected Client_CID’s Client_PREFIX with the value of Client_HIGH_FILE_NO plus 1.
I am constructing the Case_CFN on the before update event of the combo box for selecting the client. The resulting Case_CFN may appear as follows
ABC10001
Where Client_PREFIX = “ABC” and Client_HIGH_FILE_NO = 10000
Now, I need to increment Client_HIGH_FILE_NO in tblClient by 1, meaning I need to set the value of Client_HIGH_FILE_NO for the selected Client_CID to, in this example, to 10001.
Questions:
1) Is anyone familiar with this type of number scheme generally and if so any ideas?
2) Can anyone tell me how to update the value Client_HIGH_FILE_NO for the selected Client_CID?
I'm trying to develop a form that opens when you select a tab from another form. The first form would contain Standard Instructions (from a table) and the second form would have a Memo Field for special instructions. The user wants to be able to click a check box for each standard special instruction and when they close the first form all the check standard instructions to update the special instructions memo field on the second form. I'm thinking I have to set up a loop to go thru all records when the first form is closed. Any ideas on how this would work best?
