I have a form with 4 tab pages. on the 2 tab page I have a subform that adds records to a table via 2 combo boxes.
I have been able to stop user from leaving a combo control blank or skipping to the next combo control, but if user clicks the Exit command button on the main form, from the 2nd combo control, it prompts that value has to be selected but the gives error:
"You cannot add or change record because a related record is required"
How can I stop this so form will close and undo the 1st combo selection and not give error?
My main form has 2 “Continuous Forms” sub forms. The cycle of the sub forms is set to “All Records”
Is there a way to exit the first sub form and move the focus to the second sub form utilizing only the keyboard? (Like shift + tab, or any custom buttons) I’m trying to avoid using the mouse
I use a form for data entry. When I hit the next arrow in the navigation button section (the default navigation buttons supplied by access), by data is saved into the relevant table.
When the I press the X on the form my data is also saved. However I'm not given the opportunity to say if I want to quit the form or save the data.
Hi all, I have a textbox with an input mask for an id number, so if I begin adding numbers I get an error message if they're not in correct format- this is fine- but I want the user to be able to cancel the entry and exit the form, but when I click the cancel button I get an error message about the id format- anyone know how I can allow cancel to override this? thanx
HI How can exit from an "DataEntry=True" and "AllowAdditions=True" Form without add a new record to the table ??
Any help please!!!!! Thanks Ps: i only can do that if i press 'esc' in the 'textbox', but that doesn't suits me. the form only have a 'textbox' and a 'commandbutton'
I am developing an Access 2003 database for our shipping dept. I have linked tables from a Sql Server 2000 Database that MakeTable queries were used to make tables then changed to Update Queries for the data.
The shipper opens a form (Call it Dock 1, Dock 2 , etc.) to scan a barcode or manually key the Batch Code in a ComboBox that is a lookup. "Enter" moves the cursor to create the next Record with the balance of the data pulled into the next 6 or 7 fields through VB Code. This data is written to a table for verification of each shipment.
My problem is that if the form is closed or the user exits Access, this form is empty when reopened but the table is intact. I need to be able to assure the form is not cleared on exit unless by request.
I have tried
"Private Sub Form_Open(Cancel As Integer)" "docmd.gotorecord ,, aclast " "End Sub"
in the Form, (Without the Quotes) nothing happened not data was returned but, the data was in the Table
I need all entries to be retained not just the last record
I am not a programmer but i have experience with VB6 and Access 2.0, 3.0, 97, 2002, & 2003. Any help will be appreciated and I offer my thanks in advance to all responders
Hi could someone point me in the right direction for this one,
I have a series of linked tabbed Forms. One of the Forms is mostly populated by Combo boxes which all work fine. My problem occurs when you go to add a new record and populate the form with the combo boxes but decide for some reason not to save the record but exit the form using the Close form command button or by using the close button at the top of the Form. Access seems to Save the record anyway. I have placed an Undo Cmd on the form to clear all text boxes which works fine but it does not stop a user from closing or exiting a Form by another means and stop them saving that incomplete record.
I would be grateful for any thoughts on how to solve this problem.
i want that when i press the space key on my keyboard oi will exit from the form. i searched on the interne t but i couldn't find the proper one. I don't know exactly what i have to write in vba.
If my user uses the MS Access 'X' button (upper right hand of screen) to Exit the application does anyone know what methods are triggered that may let me perform some task before the application actually ends? Thanks
I've created a new database using the standard Switchboard function. However, when I use the Exit Application command the database closes but MS Access stays open. It's a minor problem but infuriating, especially as I've never encountered this problem before and everything I try won't fix it. Any ideas?
I'm having an application which is developed in access. It's running quite well, some times when I made changes to forms or reports it hangs for a while and exits without saving, it happens sometimes not always... what could be the problem? how can I rectify this..
I have a form that automatically is shown when a user enters the database. I want to disable all exits of this form so that the user cannot exit the form before he/she exits the whole database. How do I do this?
I have a form that has a command button on it. When the user clicks the command button I want the form that was up to be exited. I cannot find the correct syntax for this. Please help.
I want to set up that if there is missing value of the fields, then we cannot go to next record or exit the form when we click to do next action.
I tried to add the code in the After update event, or Exit event,
Example Code: if (isnull([Zip]) or len([zip]) = 0) then msgbox "missing" [zip].setforce end if
when I click to go to next record, or exit the form, it give out message "missing", it work fines, but, it still go to next record, or exit the form after the message.
I am working on adding the function of adding a date to a field on a form On Exit from another field. If the field I am exiting has a value of "No" i want to add the current date and if it is "Yes" I want to make sure the other field is null. I can't seem to find how to do this effectively. Can someone help me here?
I'm trying to figure out how to validate a field to make sure the users are not entering any blank spaces into the field. I've tried setting the mask up as "aaaaaa" but it still lets the user enter a blank space.
I've also tried building an event procedure to run on exit that reads:
Private Sub Barcode_Exit(Cancel As Integer) Dim LPos As Integer Dim LChar As String Dim LValid_Values As String
'Start at first character in Barcode LPos = 1
'Set up values that are considered to be alphanumeric LValid_Values = " abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWX YZ+-.0123456789"
'Test each character in Barcode While LPos <= Len(pValue)
'Single character in Barcode LChar = Mid(pValue, LPos, 1)
'If character is not alphanumeric, return FALSE If InStr(LValid_Values, LChar) = 0 Then AlphaNumeric = False Exit Function End If
'Increment counter LPos = LPos + 1
Wend
'Value is alphanumeric, return TRUE AlphaNumeric = True If AlphaNumberic = False Then MsgBox "Barcode cannot contain blank spaces, only letters and numbers.", vbExclamation, "Barcode Field Value" Else End Sub
**** However the message box does not come up and the form will not then let you get out of that field.
Any ideas? I've been checking on this field by running a query and then manually correcting the errors but I would rather that the DB check and force correction at the time the data is entered.
I created a form to select individual subcontractors from my database to print their info and it works wonderfully, however, when I close the form I would like the check boxes to return to the default of unchecked so that when I open the form again, there are no checked boxes. How do I do this? Thanks!
I have a strange problem. On some forms with listboxes, when I close (via a close button) the listboxes want to requery after the form closes prompting a parameter box to pop up. I have no code inserted to do this. If I file-close, it works fine.
However some users don't report this to happen on their PC's. All are supposed to be set up the same though with me as an exception (having it fully installed).
I tried converting it to 2000 then back to 2002 (after trying compact-repair) which did fix it for me opening holding the shift key, but not if I open it like everyone else. We just got new PC's running XP pro from 2000. Access version is 2002 and did not change.
Any ideas? Our internal programmer is stumped as am I. He just says "that's why Access shouldn't be used for anything". I develop basic apps in Access and he hates it so I have to make sure it's perfect before rolling things out or I'll be back to the stone ages.
I want to run a function when my application closes. But it must run in all cases, so running it on the last form, or in a hidden form, is not good enough. Even if I'm in design mode with no forms loaded, I want it to run.
For background info - my app is locked down tight against clients poking around. I have got a way for me as developer to get into the "back door", and what I'm trying to do is make sure when I'm finished doing my stuff that the app is locked again without me having to remember to do it.
I am trying to use to update the field in a record, What I am trying to achieve, is once I press/click the update button, cursor needs to move to next desire field which is "txteditcid", but after pressing the update button, I am getting following error (however, field is updating in table)
Run-time error '2110': Microsoft Access can't move the focus to the control txteditcid
Code:
Private Sub Butupdatecustemail_Click() Dim dbs As DAO.Database, update1 As String, rcount As Integer Set dbs = CurrentDb update1 = "UPDATE CustomerProfile set custemail='" & Me.txteditcustemail & "'" & "WHERE cid='" & Me.txteditcid & "'"
I have a form with text boxes bound to a table. There are two fields, ProposedSalary and ProposedIncreasePercent, that should not be populated at the same time. It's either one or the other. I've tried to add a validation to the percent field to check if the salary field is empty or has value. That did not work for me and I removed the validation. Ever since, if I try to input a percent value into percent field, it changes to zero on exit. I think i might have tried to add that same validation to the form itself but i checked all the properties and I don't see anything. I've looked at the VBA code view and did not see ProposedIncreasePercent referenced anywhere. I created the document for the form through the document analyzer and searched for that field and couldn't find it. So, I can't find anything coded anywhere to change that field to zero but yet it does. I've also tried to remove the field and add it again and it does the same thing.
Below is the code for exiting without saving. It works perfectly fine. I just want to know if I can change the MSGBOX message to something like "Are you sure you want to exit without saving?" instead of its default message - "Are you sure you want to delete this record? and also, right now, if I click NO when I am asked if I want to delete this record, it exit the form rather than staying in the same form. But how do I make it to STAY in the same form if I click NO.
Code: Private Sub Command24_Click() On Error GoTo Command24_Click_Err On Error Resume Next DoCmd.RunCommand acCmdUndo
